Impedance studies on polyacrylonitrile–CuX2–DMSO (X=Cl, Br, CF3SO3) solid polymer electrolyte

A series of polyacrylonitrile–dimethylsulfoxide–CuX₂ (X=CF₃SO₃⁻, Cl⁻, Br⁻), films (foils) were prepared by means of the solution cast technique. The thickness of the foils was between 0.04 and 0.09 cm and they contained 70–80 wt.% of the solvent. Conductivities of the solid electrolytes were obtained from impedance measurements. The conductivity increases with the increase of the salt content up to 8 wt.%; at higher concentrations (>8 wt.%) the conductivity is more or less stable, and reaches, in the case of Cu(CF₃SO₃)₂ and CuCl₂, the level of ca. 10⁻³ Ω⁻¹ cm⁻¹ at room temperature. The foils based on the CuBr₂ show even higher conductivity, close to 10⁻² Ω⁻¹ cm⁻¹ at room temperature, a value comparable to that characteristic for liquid solutions. The temperature variation of the conductivity for all the systems studied is of the Arrhenius type. The activation energy, determined from linear plots lnσ=f(T⁻¹), is of the order ca. 14 kJ mol⁻¹ for the PAN/CuBr₂/DMSO and of ca. 21 kJ mol⁻¹ for the PAN/CuCl₂/DMSO and the PAN/Cu(CF₃SO₃)₂/DMSO systems.     

Polyacrylonitrile–sulfolane–CuX2 (X=Cl, Br, CF3SO3) solid polymer electrolyte

A series of polyacrylonitrile–sulfolane–CuX₂ (PAN–TMS–CuX₂, where X=Cl, Br, CF₃SO₃) polymer electrolytes, of thickness between 0.03 and 0.07 cm, were prepared by means of the solution cast technique. The solvent content was as high as 60–70 wt.%. Conductivities of the foils obtained from impedance measurements were of the order of 10⁻³ Ω⁻¹ cm⁻¹. Temperature variation of the conductivity for all the systems studied was of the Arrhenius type. Exchange current density at the Cuelectrolyte interface, determined from the Tafel plot, was of the order of milliampere (mA). Cyclic voltammetry showed the irreversible character of the copper plating–stripping process.     

Effect of branching in base polymer on ionic conductivity in hyperbranched polymer electrolytes

Novel hyperbranched polymer, poly[bis(diethylene glycol)benzoate] capped with a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group (poly-Bz1a), was prepared, and its polymer electrolyte with LiN(CF₃SO₂)₂, poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte, was all evaluated in thermal properties, ionic conductivity, and electrochemical stability window. The poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte exhibited higher ionic conductivity compared with a polymer electrolyte based on poly[bis(diethylene glycol)benzoate] capped with an acetyl group (poly-Ac1a), and the ionic conductivity of poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte was to be 7×10⁻⁴ S cm⁻¹ at 80 °C and 1×10⁻⁶ S cm⁻¹ at 30 °C, respectively. The existence of a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group as a branching unit present at ends in the base polymer improved significantly ionic conductivity of the hyperbranched polymer electrolytes. The polymer electrolyte exhibited the electrochemical stability window of 4.2 V at 70 °C and was stable until 300 °C.     

The pH dependence of fluorescein fluorescence

Fluorescence quantum yields Φ_f and corrected fluorescence spectra were determined for fluorescein over a wide pH range (10 M H₂SO₄ to 0.01 M NaOH) in aqueous solution. The results were interpreted by comparison with those obtained for the very similar dye 6-hydroxy-9-phenyl-fluoron (HPF) which lacks the fluorescein carboxyl group. We find for the fluorescein cation Φ_f = 0.9−1, for the neutral molecule Φ_f = 0.20−0.25, and for the monoanion Φ_f = 0.25−0.35. The neutral molecule and monoanion have identical fluorescence spectra: an emission with maximum at 515 nm, extending to about 700 nm. (The dianion also has a maximum at 515 nm but has a more narrow emission band.) The fluorescein cation dissociates in the excited state at an acidity corresponding to that of ≈3 M H₂SO₄. A detailed scheme of the protolytic reactions of fluorescein in the excited state is presented.     

Influence of different deposition potentials on morphology and structure of CdSe films

Cadmium selenide (CdSe) thin films have been electrodeposited on the titanium or ITO substrate in an electrolyte containing CdSO₄ and H₂SeO₃ at pH = 2.50 and temperature 298 K. Influence of different deposition potentials on the surface morphology and crystal structure of CdSe films has been discussed. Compared with other deposition potentials (−0.65, −0.71 and −0.72 V versus SCE), the nearly stoichiometric CdSe nanocrystalline films with smaller grain sizes of 80 nm were obtained from 0.25 M CdSO₄ + 0.25 mM H₂SeO₃ + 0.25 M Na₂SO₄ solution at deposition potential of −0.70 V versus SCE. X-ray diffraction, atomic force microscope and scanning electron microscope were used to measure structure and morphology of CdSe films. The results indicated that the electrodeposited films were the smooth, compact and uniform at deposition potentials of −0.70 V versus SCE.     

Ion conductive characteristics of cross-linked network polysiloxane-based solid polymer electrolytes

A series of cross-linked network polysiloxanes containing oligoethylene oxide units, (OCH₂CH₂)_n, as internal free chains have been synthesized by performing hydrosilylation of partially PEO-substituted polysiloxane precursor with , ω-diallyl terminated poly(ethylene glycol). The polymer electrolytes were formed by complexing with LiN(CF₃SO₂)₂ electrolyte salt and exhibited superior conductive property. The σ_RT of the network polymer electrolytes is in the range of 2.50×10⁻⁵ to 1.62×10⁻⁴ S/cm and depends on the cross-linking density (in terms of Si–H amount of the siloxane precursor), repeating unit number of internal oligoethylene oxide and chain length of the cross-linker. The significant enhancement of the conductivity was observed when low molecular weight dimethyl poly(ethylene glycol) was added as plasticizer. The temperature dependence of the ionic conductivity was also studied, following the Vogel–Tamman–Fulcher (VTF) equation.     

Densification and conductivity enhancement of Na4Zr2Si3O12-based solid electrolytes using TiO2 as a sintering aid

Densification of Na₄Zr₂Si₃O₁₂ (NZS) solid electrolytes was performed by dispersing TiO₂ (0.8–5.9 wt. %, corresponding to 5–30 mol %) in NZS powders prior to sintering at 1200°C. Increases in pellet density, from ca. 65 to 94% of the theoretical (X-ray density) value, and in electrical conductivity from 10⁻⁷ to 10⁻⁶ S/cm at 50°C were observed for small additions of TiO₂, which acts as a sintering aid. AC impedance spectroscopy reveals that the enhancement is not a bulk effect but instead is associated with a reduction in inter-granular constriction resistances within porous NZS ceramics. The presence of adsorbed water species in NZS powders prepared via a sol-gel route is found to have a dramatic effect on the conductivity enhancement.     

Chemically deposited copper oxide thin films: structural, optical and electrical characteristics

Thin films of copper oxide with thickness ranging from 0.05–0.45 μm were deposited on microscope glass slides by successively dipping them for 20 s each in a solution of 1 M NaOH and then in a solution of copper complex. Temperature of the NaOH solution was varied from 50–90°C, while that of the copper solution was maintained at room temperature. X-ray diffraction patterns showed that the films, as prepared, are of cuprite structure with composition Cu₂O. Annealing the films in air at 350°C converts these films to CuO. This conversion is accompanied by a shift in the optical band gap from 2.1 eV (direct) to 1.75 eV (direct). The films show p-type conductivity, 5×10⁻⁴ Ω⁻¹ cm⁻¹ for a film of thickness 0.15 μm. Electrical conductivity of this film increases by a factor of 3 when illuminated with 1 kW m⁻² tungsten halogen radiation. Annealing in a nitrogen atmosphere at temperatures up to 400°C does not change the composition of the films. However, the conductivity in the dark as well as the photoconductivity of the film increases by an order of magnitude. The electrical conductivity of the CuO thin films produced by air annealing at 400°C, is high, 7×10⁻³ Ω⁻¹ cm⁻¹. These films are also photoconductive.     

The study of hydronium NASICON conductivity with deuterium

The ionic conductivity of the bulk phase of bonded hydronium NASICON (Hyceram^TM) was measured at equilibrium with an H₂O/N₂ and then a D₂O/N₂ atmosphere, each at 100% relative humidity and 75% relative humidity over the temperature range 25°C to 50°C. At 100% relative humidity and 25°C, the protonic system had a bulk conductivity of 5.0×10⁻⁴ S/cm and an activation energy of 17.3kJ/mole; the same sample, when deuterated, had a bulk conductivity of 2.2×10⁻⁴ S/cm and an activation energy of 19.3kJ/mole. At 75% relative humidity and 25°C, the conductivity of the protonated system decreased to 1.4×10⁻⁴S/cm with an activation energy of 24.1 kJ/mole. The deuterated sample at 75% relative humidity had a bulk conductivity of 5.4×10⁻⁵ S/cm with an activation energy of 26.0 kJ/mole. The isotope effect suggested a proton hopping (Grotthus) mechanism as the means by which the protons pass through the lattice.     

Thermal and complex impedance analysis of amorphous and crystalline lithium salt mixtures

Amorphous electrolytes consisting of the lithium salts, Li[R-NSO₂CF₃] were prepared and the attendant low ionic conductivities of the lithium salt mixtures (1×10⁻⁶ S cm⁻¹ at room temperature) are attributed to high glass transition temperatures. An example is the novel amorphous salt, Li[18-C-6NSO₂CF₃] which produces an amorphous salt mixture with Li[N(SO₂CF₃)₂] (LiTFSI).     

Electrochemically deposited Ni on Ge(111) investigated with X-ray standing waves

Ni was electrodeposited on Ge(111) surfaces from an aqueous solution containing 0.5M Na₂SO₄ and 10⁻³M NiSO₄, using a standard three-electrode electrochemical cell. Cyclic voltammetry was used to yield information about the cleanliness of the immersed, p-type Ge(111) surfaces. After deposition at a fixed potential, the samples were removed from the cell and investigated with X-ray standing waves while kept under an inert gas atmosphere. The analysis of the X-ray standing wave data shows that several monolayers of Ni occupy a well defined lattice location. From these results together with the results of the cyclic voltammetric measurements we conclude that the first layers of Ni react with the Ge(111) surface forming a few layers of ordered germanide.     

A new measurement of the weak magnetism term in the betaspectra of B and N

The betaspectra of ¹²B and ¹²N have been measured with a NaI crystal as spectrometer. Assuming a shape correction factor 1 + aW + bW² and b₋ = 1.106 × 10⁻⁴ MeV⁻², b₊ = −1.397 × 10⁻⁴ MeV⁻², the spectra yield a₋ = (+0.91 ± 0.11) × 10⁻² MeV⁻¹ and a₊ = (−0.07 ± 0.09) × 10⁻² MeV⁻. the a₋ − a₊ = (+0.98 ± 0.09) × 10⁻² MeV⁻¹ is in agreement with the weak magnetism prediction.     

Ionic conduction and dielectric relaxation in Ag/Na ion-exchanged aluminosilicate glasses: mixed mobile ion effect and KWW relaxation

Ag⁺/Na⁺ ion-exchanged aluminosilicate glasses with uniform concentration profiles were prepared, and their electrical conductivities were investigated as functions of the ion-exchange ratio and the initial glass compositions. In the case of the ion-exchanged glasses of x20Ag₂O–(1−x)20Na₂O–10Al₂O₃–70SiO₂ in mol%, the conductivity, σ, and its activation energy, E_σ, showed a minimum and a maximum at the same ion-exchange ratio x=0.3, respectively, and the mixed mobile ion effect (MMIE) was observed. The fully ion-exchanged sample attained σ=3.5×10⁻⁵ S/cm at 200 °C, which was 1.5 orders of magnitude larger than that of initial glass. In the case of x25Ag₂O–(1−x)25Na₂O–25Al₂O₃–50SiO₂, the mixed mobile ion effect was also observed at x=0.5. The maximum conductivity of 2×10⁻⁴ S/cm at 200 °C was obtained in the fully ion-exchanged glass sample.

The electric relaxation analysis was also conducted on both systems, and Kohlrausch–Williams–Watts (KWW) fractional exponent β was obtained as a function of x. The decrease of β was observed near x≈0.3 in the former system, while that of the later system was independent of the ion-exchange ratio. Based on the structural analysis results, the observed behaviors were investigated from the point of view of the occupation of Ag⁺ ions on the non-bridging oxygen-site (NBO-site) and the charge compensation-site (CC-site) of AlO₄ tetrahedral unit.     

Davydov splitting and two-photon excitation of cadmium tungstate (CdWO4) single crystal phosphorescence

Phosphorescence characteristics of CdWO₄ excited by one-photon (λ = 308 nm) and two-photon (λ = 570–590 nm) processes were measured. A Davydov splitting of 120 ± 20 cm⁻¹ was obtained in the phosphorescence spectra, suggesting a diffusion coefficient of about 1.2 × 10⁻² cm² s⁻¹, and a diffusion length of about 3.1 × 10⁻⁴ cm for the room temperature measured lifetime of 8μs. The phosphorescence quantum efficiency was less than 2% at low temperatures (only 0.25% at room temperature), indicating that the dominant decay mechanism was radiationless. The radiative lifetime was thus estimated as 1–2 ms. The two-photon phosphorescence excitation is characterized by an absorption cross-section of the order of 10⁻⁴⁹cm⁴s.     

Oxygen diffusion and surface exchange in La1−xSrxFe0.8Cr0.2O3−δ (x=0.2, 0.4 and 0.6)

Oxygen tracer diffusion (D*) and surface exchange rate constant (k*) have been measured, using isotopic exchange and depth profiling by secondary ion mass spectrometry (SIMS), in La_1−xSr_xFe_0.8Cr_0.2O_3−δ (x=0.2, 0.4 and 0.6). Measurements were made as a function of temperature (700–1000 °C) and oxygen partial pressure (0.21–10⁻²¹ atm) in dry oxygen, water vapour and water vapour/hydrogen/nitrogen mixtures. At high oxygen activity, D* was found to increase with increasing temperature and Sr content. The activation energies for D* in air are 2.13 eV (x=0.2), 1.53 eV (x=0.4) and 1.21 eV (x=0.6). As the oxygen activity decreases, D* increases as expected qualitatively from the increase in oxygen vacancy concentration. Under strongly reducing conditions, the measured values of D* at 1000 °C range from 10⁻⁸ cm² s⁻¹ for x=0.2 to 10⁻⁷ cm² s⁻¹ for x=0.4 and 0.6. The activation energies determined at constant H₂O/H₂ ratio are 1.21 eV (x=0.2), 1.59 eV (x=0.4) and 0.82 eV (x=0.6).

The surface exchange rate constant of oxygen for the H₂O molecule is similar in magnitude to that for the O₂ molecule and both increase with increasing Sr concentration.     

Effects of surface treatments and annealing on carbon-based molecular sieve membranes for gas separation

A new method in preparing carbon-based molecular sieve (CMS) membranes for gas separation has been proposed. Carbon-based films are deposited on porous Al₂O₃ disks using hexamethyldisiloxane (HMDSO) by remote inductively coupled plasma (ICP) chemical vapor deposition (CVD). After treating the film with ion bombardment and subsequent pyrolysis at a high temperature, carbon-based molecule sieve membranes can be obtained, exhibiting a very high H₂/N₂ selectivity around 100 and an extremely high permeance of H₂ around 1.5 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹ at 298 K. The O₂/N₂ selectivity could reach 5.4 with the O₂ permeance of 2 × 10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ at 423 K.

During surface treatments, HMDSO ions were found to be more effective than CH₄, Ar, O₂ and N₂ ions to improve the selectivity and permeance. Short and optimized surface treatment periods were required for high efficiency. Without pyrolysis, surface treatments alone greatly reduced the H₂ and N₂ permeances and had no effect on the selectivity. Besides, without any surface treatment, pyrolysis alone greatly increased the H₂ and N₂ permeances, but had no improvement on the selectivity, owing to the creation of large pores by desorption of carbon. A combination of surface treatment and pyrolysis is necessary for simultaneously enhancing the permeance and the selectivity of CMS membranes, very different from the conventional pore-plugging mechanism in typical CVD.     

Star-shaped oligo(ethylene glycol) ethers (OEGE) as a new type of plasticizer for polymer gel electrolytes

Star-shaped oligo(ethylene glycol) methyl ethers (three and four arm molecules of various molecular weights) were synthesized and characterized with regard to viscosity, thermal transitions, ability to solvate the electrolyte LiCF₃SO₃ and the ionic conductivity of their LiCF₃SO₃ solutions in comparison to linear oligo(ethylene glycol) methyl ethers. Polymer gel electrolytes were prepared by photopolymerization of tri(ethylene glycol) dimethacrylate (EG₃DMA) or its copolymerization with the polar comonomer cyanomethyl methacrylate (CyMA) in the presence of the oligo(ethylene glycol) ethers mentioned above and of the electrolyte LiCF₃SO₃. The gels were characterized concerning their thermal transitions, thermo-mechanical properties, their ability to solvate the electrolyte and their ionic conductivity. In comparison to the linear plasticizers the star-shaped ones show a distinctly lower tendency to crystallize, which is even completely suppressed in several cases. Intensified ion association was found in LiCF₃SO₃ solutions of the star-shaped plasticizers, if the number of the ethylene glycol units per arm was lower than 4. Therefore, the conductivity of the solutions and the gels was lower than that with linear plasticizers at room temperature. The modification of the polymer matrix by copolymerization with 20 mol% CyMA resulted in a maximum of the ionic conductivity σ≈1×10⁻⁵ S/cm of gels with star-shaped plasticizers at 25 °C.     

Sr-doped LaInO3 and its possible application in a single layer SOFC

The effects of dopants on the electrical conductivity of the perovskite-type oxide LaInO₃ have been investigated. Replacement of La by Sr is the most effective way to enhance the conductivity of LaInO₃, whereas Ca substitution for In is rather difficult due to the large difference in the ion radii. The optimum composition is La_0.9Sr_0.1InO_3−δ whose maximum conductivity is 7.6×10⁻³ S cm⁻¹ at 900°C. The electrical conductivity of La_0.9Sr_0.1InO_3−δ has been measured over a wide range of oxygen partial pressure from pO₂=1 to 10⁻²⁵ atm. P-type and n-type behavior at high and low oxygen partial pressure have been observed, respectively, while at intermediate oxygen partial pressures, the electrical conductivity changes only slightly with the oxygen partial pressure. The concept of a single layer solid oxide fuel cell based on a La_0.9Sr_0.1InO_3−δ ceramic pellet has been tested. A maximum power density of 3 mW cm⁻² at 800°C was achieved when dilute H₂ and air were used as fuel and oxidizing agent, respectively.     

Lithium scandium phosphate-based electrolytes for solid state lithium rechargeable microbatteries

Li₃Sc₂(PO₄)₃ is a promising candidate for use as an electrolyte in solid state lithium rechargeable microbatteries due to its stability in air, ease of preparation, and resistance to dielectric breakdown. The room temperature ionic conductivity was optimized resulting in an increase of over two orders of magnitude to 3×10⁻⁶S/cm. The formation of Li₃(Sc_2−xM_x)(PO₄)₃, where M=Al³⁺ or Y³⁺, resulted in the decrease of porosity, greater sinterability, and considerable enhancement of the ionic conductivity. Yttrium substitutions enhanced the conductivity slightly while aluminum increased the room temperature ionic conductivity to 1.5×10⁻⁵S/cm for x=0.4. Preliminary electron beam evaporation of Li₃Sc₂(PO₄)₃ yielded amorphous thin films with ion ic conductivity as high as 5×10⁻⁵S/cm and a composition of Li_4.8Sc_1.4(PO₄)₃.     

Poly(ethylene oxide-co-epichlorohydrin)/NaI: a promising polymer electrolyte for photoelectrochemical cells

We have investigated the thermal and ionic conductivity properties of the elastomer poly(ethylene oxide-co-epichlorohydrin) filled with NaI and I₂. The reason for using this composition is its potential application as electrolyte in photoelectrochemical cells. This copolymer was characterized as a function of NaI concentration, temperature and relative humidity. According to the data obtained, the Na⁺ ion interacts with the ethylene oxide repeating units by means of Lewis type acid–base interactions. The empirical Vogel–Tamman–Fulcher equation was used to model the conductivity and temperature relationships, indicating that the conduction occurs in the amorphous phase of the copolymer. The sample with 9.0% (w/w) of NaI presents a conductivity of 1.5×10⁻⁵ S cm⁻¹ in a dry atmosphere (30°C, [H₂O]<1 ppm) and 2.0×10⁻⁴ S cm⁻¹ at 86% relative humidity (22°C).