一种激光平行分束器的设计

为满足波面剪切干涉和双细光束干涉曲反射表面非接触精密测量、台阶高度测量以及其他平行分光需要,利用双折射晶体特性,研究并设计了一种单一平板激光平行分束器。当一束激光入射到双折射晶体时,它的2个相互正交的的偏振分量将有不同的折射特性,因此特定晶轴方向和厚度的晶体平行平板可以实现入射光束的平行分束。描述了双折射晶体平行平板的分束原理,推导了分束距离与光轴方向、晶体厚度、入射角的关系,分析了分束距离随主要设计参数的变化规律。采用设计的晶体激光分束器进行了实验测试,验证了分析与实测结果的一致性。     

A novel optical beam splitter based on photonic crystal with hybrid lattices

A novel optical beam splitter constructed on the basis of photonic crystal(PC) with hybrid lattices is proposed in this paper.The band gap of square-lattice PC is so designed that the incident light is divided into several branch beams.Triangular-lattice graded-index PCs are combined for focusing each branch.Computational calculations are carried out on the basis of finite-different time-domain algorithm to prove the feasibility of our design.The waveguide is unnecessary in the design.Thus the device has functions of both splitting and focusing beams.Size of the divided beam at site of full-width at half-maximum is of the order of λ/2.The designed splitter has the advantages that it has a small volume and can be integrated by conventional semiconductor manufacturing process.     

Space-Charge Effects in a Laser Fiber-Optics Triggered Multichannel Spark Gap

The dual channel triggering of a spark gap switch by fiberoptic transported ruby laser radiation is discussed. The spark gap is the output switch of a 20-ns water dielectric Blumlein generator. The Blumlein generator is pulse charged in approximately 250 ns by a three-stage Marx bank to 150 kV. The spark gap is operated at a pressure of 2540 torr with a mixture of Ar and N2 gas and an electrode separation of 2 cm. Two 1-mm diameter quartz optical fibers are used to transport 2 2-MW laser beams into the spark gap onto points 6 cm apart on the target electrode. The two beams are obtained by optical splitting of the output of a single laser. Under appropriate conditions, two arc channels are initiated by the laser beams along their paths. A small improvement in current rise time for dual channel events over single channel events is observed. Moreover, the number of successful dual channel events is observed to depend on the time of laser entry with reference to the beginning of the charging pulse, and not the gap polarity. The correlation of this behavior with the space charge build up in the slightly over-volted gap is discussed.     

Polarization Beam Splitter Based on Self-Collimation Effect in Two-Dimensional Photonics Crystal

A photonic crystal polarization beam splitter based on the self-collimation effect is proposed. By means of the plane wave expansion method and the finite-difference time-domain method, we analyse the splitting mechanism in two alternative ways： performing a band gap structure analysis and simulating the field distribution. The results indicate that two beams of different polarizations can be split with an extinction ratio of nearly 20 dB in a wavelength range of POnm. The splitter may have practical applications in integrated photonic circuits.     

Optimization and numerical simulation for the extraction system of the H~- multicusp ion source

A new ion source has been designed and manufactured for the CYCLONE30 accelerator, which has a much advanced performance compared with the original. It is expected that the newly designed ion source extraction system will transport a very large percentage of the beam without deteriorating the beam optics, which is designed to deliver an H^- beam at 30 keV. The accelerator assembly consists of three circular aperture electrodes made of copper. The simulation study was focused on finding parameter sets that raise the beam perveance as large as possible and which reduce the beam divergence as low as possible. Ion beams of the highest quality are extracted whenever the half-angular divergence is minimum, for which the perveance current intensity and the extraction gap have optimum values. The triode extraction system is designed and optimized by using CST software (for Particle Beam Simulations). The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that it is possible to achieve this goal by decreasing the thickness of the plasma electrode, shortening the first gap, and adjusting the acceleration electrode voltage.     

表层厚度渐变一维耦合腔光子晶体的反射相位特性及其应用

利用传输矩阵法研究了表层厚度渐变的一维非对称耦合腔光子晶体的反射相位特性. 研究表明, 光子禁带内(包括缺陷模附近)的反射率在98%以上, 且基本不受表层厚度影响, 特别是, 在非正入射情况下, 简并的缺陷模随着表层厚度的变化会发生分裂; 进一步研究发现, 在缺陷模分裂处附近, TE, TM偏振的反射相位以及它们之间的相位差均敏感地依赖于表层厚度的变化, 从而使得反射光的偏振态也随表层厚度的变化而敏感变化, 其物理机理在于缺陷模分裂所造成的剧烈相位变化. 基于上述特性, 设计了一种表层厚度呈二维周期变化的一维光子晶体结构, 从该结构反射的激光经透镜聚焦后, 在聚焦区域同时存在各种偏振态(包括沿不同方向的线偏振、左旋或右旋圆偏振、椭圆偏振等)的子光束, 它们叠加后在聚焦区域将产生具有无规相位和无规偏振态的光场. 以上结果能有效降低激光的相干性, 在激光核聚变等领域有潜在的应用价值.     

The REX-ISOLDE project

The Radioactive Beam Experiment REX-ISOLDE [1–3] is a pilot experiment at ISOLDE (CERN) testing the new concept of post acceleration of radioactive ion beams by using charge breeding of the ions in a high charge state ion source and the efficient acceleration of the highly charged ions in a short LINAC using modern ion accelerator structures. In order to prepare the ions for the experiments singly charged radioactive ions from the on-line mass separator ISOLDE will be cooled and bunched in a Penning trap, charge bred in an electron beam ion source (EBIS) and finally accelerated in the LINAC. The LINAC consists of a radiofrequency quadrupole (RFQ) accelerator, which accelerates the ions up to 0.3 MeV/u, an interdigital H-type (IH) structure with a final energy between 1.1 and 1.2 MeV/u and three seven gap resonators, which allow the variation of the final energy. With an energy of the radioactive beams between 0.8 MeV/u and 2.2 MeV/u a wide range of experiments in the field of nuclear spectroscopy, astrophysics and solid state physics will be addressed by REX-ISOLDE. This revised version was published online in July 2006 with corrections to the Cover Date.     

Specific features of the spectral properties of a cholesteric liquid crystal with a resonance defective nanocomposite layer

This paper reports on studying the spectral properties of a cholesteric liquid crystal with a defective layer of a nanocomposite consisting of metallic nanoballs dispersed in a transparent matrix and characterized by an effective resonance dielectric permittivity. The transmission, reflection, and absorption spectra of waves of both circular polarizations have been calculated, and the spectral splitting of the defective mode when its frequency coincides with the resonance frequency of the nanocomposite has been studied. An essential dependence of the splitting on the nanoball concentration in the defect has been established. It has been shown that, depending on the position of the resonance frequency with respect to the boundaries of the cholesteric band gap, an additional passband appears in the transmission spectrum, which corresponds to waves of the diffracting circular polarization, or an additional band gap for waves of both circular polarizations, which are substantially modified with variations of both the incidence angle of light and the cholesteric helix pitch.     

Polarization-independent beam splitting by a photonic crystal right prism

Splitting of light waves by a two-dimensional photonic crystal associated with source size and dispersion relation of photonic crystal at a wavelength of 1,550 nm without disturbing periodicity is numerically demonstrated via finite-difference time-domain simulations. Split branches in either polarization state make plus or minus 45° with the [11] direction and propagate in a self-collimated manner with equal amplitude and phase. Sixty-four percent of total transmittance is attained provided that the waves are coupled and collected through appropriate planar waveguides. Alternatively, approximately 50 % total transmittance for both polarizations can be obtained by application of an anti-reflection coating layer at the input face. Polarization-independent beam splitting occurs in a narrow range around the target wavelength, while its transverse-magnetically polarized sub-harmonic can also be split. The photonic crystal can also operate as a polarizing splitter at oblique incidence.     

Specifics of electromagnetic TE waves splitting and combining under the conditions of frustrated total internal reflection in a thin dielectric layer

The possibility of designing optical beam splitters based on frustrated total internal reflection (FTIR) is considered. A theory describing splitting of a single light wave into two waves and interference of two light waves in a thin dielectric gap under the FTIR conditions is presented. The resulting expressions are analyzed, and the curves describing the behavior of light beams in the process of their splitting and combining in a thin dielectric layer under the FTIR conditions are plotted.     

用于聚焦离子束系统的离子源

介绍了现阶段两种用于聚焦离子束系统的离子源——液态金属离子源和气体场发射离子源的基本原理, 并对比了它们的优缺点。由于目前这两种离子源都难以满足纳米加工领域不断提高的技术要求, 因此提出了一种用于聚焦离子束的新型离子源——电子束离子源, 并介绍了电子束离子源的基本原理, 给出了设计参数、 模拟结果（20 kV的Ar+离子束, 发射度约为5.8×10-5·mm·mrad, 束斑约为1 μm）和初步的实验结果。 There are two kinds of ion sources, Liquid Metal Ion Source and Gas Field Ion Source, used to provide ion beams for the Focus Ion Beam system. The working mechanism of the two kinds of sources is presented and their advantages and disadvantages are summarized. With the rapid development in the nano technology, the requirements are hardly met with these two kinds of ion sources. Therefore, a new kind of ion source, electron beam ion source, is developed for the Focus Ion Beam system. The basic principle of the electron beam ion source is introduced and the design parameters, the result of the simulation (20 kV Ar+, extracted emittance is 5.8×10-5π·mm·mrad, raduis of the ion beam about 1 μm.) and the primary experimental results are presented     

非水溶性光致聚合物光子晶体的研制

报道了一种新型的利用激光全息技术制作光子晶体的记录材料,即自制的非水溶性光致聚合物.用绿光作为光源对材料性能参量做简单测试,经测试其衍射效率可达85%,在波长为514.5 nm处拥有较高的吸收率,且该材料的后处理过程简单,只需热烘.利用Matlab简单模拟全息法制作光子晶体的过程,经模拟得到干涉的光束越多,光子晶体的晶格结构越复杂.设计了制作二维、三维光子晶体的实验光路,分光元件分别为掩模板和去顶棱镜.实验结果表明,利用非水溶性光致聚合物可制作大面积、大体积、耐高温和高强度的二、三维光子晶体,且其晶体结构与Matlab模拟的结果基本一致|利用非水溶性光致聚合物作为记录材料时,光路的搭建是影响实验结果的重要因素.     

Ultrasonic wedges for elastic wave bending and splitting without requiring a full band gap

We present a novel twinned-square periodic structure for ultrasonic wave bending and splitting that does not require the existence of a complete band gap and plays the role of an ultrasonic wedge. The device allows 45 degrees bending of waves and by adequately switching the twinned structure to an ultrasonic crystal 90 degrees bending is achieved. An extreme refraction law at the grain boundaries is experimentally observed.     

多色高斯-谢尔模型光束通过球差透镜的光谱变化

基于部分相干光的传输方程研究了多色高斯一谢尔模型光束通过球差透镜的光谱变化。结果表明,多色高斯一谢尔模型光束通过球羞透镜后的轴上光谱与空间相关参量β,球差系数C1,源光谱谱宽σ0,位置z有关。着重分析了球差对轴上光谱的影响,将所得的结果与无像差的理想情况作了比较。当无球差时,轴上光谱仅有蓝移,而有球差时,轴上光谱存在蓝移或红移,并会出现光谱分裂现象。在某些特定位置处,轴上光谱分裂为等高双峰,并有跃变出现。而且,球差对光谱的影响随空间相关性增加而变得明显。当空间相关参量减小到某一值时,光谱分裂消失。     

Beam coupling ratios and diffraction efficiencies of a layer-structured liquid crystal device; the effect of injection temperature and layer thickness

Beam coupling ratios and diffraction efficiencies of a photorefractive liquid crystal cell were measured while changing the injection temperature and the layer thickness of the liquid crystal in a layer-structured fabrication. A high beam coupling ratio and first-order Raman–Nath diffraction efficiency were observed at low injection temperature and small cell gap, which showed high order parameters. However, as the cell gap was reduced, the shear stress at the interfaces between the liquid crystals and the photoconducting layers increased, so that the reorientation of the liquid crystals by an internal field could be restricted by the geometry and interrupted by a highly-induced surface energy, reducing photorefractive effects. An optimum exists in the neighborhood of 7.5 m when LCs are injected at 25 °C under our experimental conditions . PACS 42.65.Hw; 42.70.Df     

Spectral properties of a one-dimensional photonic crystal with a resonant defect nanocomposite layer

The spectral properties of a one-dimensional photonic crystal with a defect nanocomposite layer that consists of metallic nanoballs distributed in a transparent matrix and is characterized by an effective resonance permittivity are studied. The problem of calculating the transmission, reflection, and absorption spectra of p-polarized waves in such structures is solved for oblique incidence of light, and the spectral manifestation of defect-mode splitting as a function of the volume fraction of nanoballs and the structural parameters is studied. The splitting is found to depend substantially on the nanoball concentration in the defect, the defect layer thickness, and the angle of incidence. The angle of incidence is found at which the resonance frequency of the nanocomposite is located near the edge of the bandgap or falls in the frequency region of a continuous spectrum. The resonance situation appearing in this case results in an additional transmission band or an additional bandgap in the transmission spectrum.     

The simulation of ultrasonic beams with a Gaussian beam equivalent point source model

Point Sources and Gaussian beams are used frequently as fundamental building blocks for developing ultrasonic beam models. Both these models have different weaknesses that limit their effectiveness. Here, we will show that one can develop a Gaussian Beam Equivalent Point Source （GBEPS） model that removes those weaknesses and combines the accuracy and versatility of the point source models with much of the speed and well-behaved nature of Gaussian beam models. We will demonstrate the efficiency and versatility of this new GBEPS model in simulating the beams generated from ultrasonic phased arrays, using as few as one Gaussian beam per element of the array. A single element GBEPS model will be shown to be as accurate as a point source model even when substantial beam focusing or steering is present in the array or where the array beam is transmitted through an interface. At the same time the GBEPS model will be shown to be several orders of magnitude faster than the point source model.     

利用电压异步调节束流能散度

对直线感应加速器加速电压的同步性对束流能散度的影响进行了分析,结果表明:考虑束流负载效应后,束流的不同部分将得到不同的能量增益,前后沿部分相对于平顶部分得到更多的能量增益,从而在一定程度上增加整个束流的能散度,限制了加速器光源尺寸的进一步减小。因此,提出利用调节加速电压异步的方法来调节束流不同部分得到的能量增益,从而在一定程度上降低整个束流脉宽期间的能散度。初步的试验结果也证明,加速电压的异步调节可以明显改变束流整体的的能散度。     

单块晶体2×2光开关

利用晶体的双折射和全内双反射现象以及晶体的电光效应 ,设计了一种单块晶体集成的 2× 2光开关 ,将一个电光调制器和两个光束分束器集成到一块铌酸锂晶体上 ,实现了光束合束、偏振态调制和光束分束三种功能。根据这种光开关的工作原理 ,给出两种开关结构 ,一种是易于级联的垂直入射结构 ,另一种是有较低操作电压的倾斜入射结构 ,并对倾斜入射结构的光开关进行了制作和测试。实验结果表明 :这种集成结构的 2× 2光开关操作电压低 ,串扰小 ,能量损耗小 ,抗干扰 ,稳定可靠 ,适用于各种光学互连网络。     

Dispersion-based beam splitter in photonic crystals

A novel implementation of a dispersion-based beam splitter in a photonic crystal (PhC) is proposed. The beam splitter consists of two periodic structures: a nonchannel dispersion-guiding region and a splitting structure operating inside the photonic bandgap. The dispersion-guiding PhC structure is used to route the optical wave by exploiting the dispersion properties of the lattice. An arbitrary power ratio between the output beams can be achieved by varying the parameters of the splitting structure. Within the studied range of splitting structures, high output power was observed and verified experimentally.