Ab initio studies of electronic spectra of the linear aluminum-bearing carbon chains AlC2nH (n = 1-5)

Geometries and stabilities of the linear aluminum-bearing carbon chains AlC_2nH (n = 1-5) in their ground states have been explored by the DFT-B3LYP and RCCSD(T) methods. Structures of the X¹Σ⁺ and 1¹Π electronic states have also been optimized by the CASSCF approach. The studies indicate that these species have single-triple bond alternate pattern, AlCCCC?CCH, and the electronic excitation from X¹Σ⁺ to 1¹Π leads to the shortening of the AlC bonds. The vertical excitation energies of the 1¹Π ← X¹Σ⁺ and 2¹Π ← X¹Σ⁺ transitions for AlC_2nH (n = 1-5) have been investigated by the CASPT2, EOM-CCSD, and TD-B3LYP levels of theory with the cc-pVTZ basis set, respectively. CASPT2-predicted 1¹Π ← X¹Σ⁺ transition energies are 3.57, 3.44, 3.33, 3.26, and 3.21 eV, respectively. For AlC₂H, our estimate agrees very well with the experimental value of 3.57 eV. In addition, the AlC bond dissociation energies and the exponential-decay curves for these vertical excitation energies are also discussed.     

Anharmonic force field and equilibrium structure of nitric acid

The quadratic, cubic and semi-diagonal quartic force field of nitric acid has been calculated at the CCSD(T) level of theory employing a basis set of triple-ζ quality. A semi-experimental equilibrium structure has been derived from experimental ground state rotational constants and rovibrational interaction parameters calculated from the ab initio force field. It is found that the A and B semi-experimental equilibrium rotational constants of the ¹⁸O isotopologues (for which the rotation of principal axes is large) cannot be accurately reproduced. This problem is discussed and a remedy is proposed. Finally, the semi-experimental structure is in agreement with the ab initio structure calculated at the CCSD(T) level of theory using a basis set of at least quadruple-ζ quality and a core correlation correction, except for the long NO single bond for which the CCSD(T) value is too short due to inadequate treatment of electron correlation. The empirical structures are also determined and their accuracy is discussed. The best equilibrium structure is: r_e(NO_syn) = 1.209(1) Å, r_e(NO_anti) = 1.194(1) Å, r_e(NO) = 1.397(1) Å, r_e(OH) = 0.968(1) Å, ∠(ONO_syn) = 115.8(1)°, ∠(ONO_anti) = 114.2(1)° and ∠(NOH) = 102.2(1)°.     

Influence of thermal treatment of low dielectric constant SiOC(H) films using MTES/O2 deposited by PECVD

Low dielectric constant SiOC(H) films are deposited on p-type Si(100) substrates by plasma enhanced chemical vapor deposition (PECVD) using methyltriethoxysilane (MTES, C₇H₁₈O₃Si) and oxygen gas as precursors. The SiOC(H) films are deposited at room temperature, 100, 200, 300 and 400 °C and then annealed at 100, 200, 300 and 400 °C temperatures for 30 min in vacuum. The influence of deposition temperature and annealing on SiOC(H) films are investigated. Film thickness and refractive index are measured by field emission scanning electron microscopy and ellipsometry, respectively. Chemical bonding characteristics of as-deposited and annealed films are investigated by Fourier transform infrared (FTIR) spectroscopy in the absorbance mode. As more carbon atoms are incorporated into the SiOC(H) films, both film density and refractive index are decreased due to nano pore structure of the film. In the SiOC(H) film, CH₃ group as an end group is introduced into OSiO network, thereby reducing the density to decrease the dielectric constant thereof. The dielectric constant of SiOC(H) film is evaluated by C-V measurements using metal-insulator-semiconductor (MIS), Al/SiOC(H)/p-Si structure and it is found to be as low as 2.2 for annealed samples deposited at 400 °C.     

Near infrared spectroscopy of organic acids: comparing OH and CH oscillator frequencies and intensities

This work investigates the vibrational spectroscopy of a series of organic acids, CH₃(CH₂)_nCOOH (n = 1-5), previously unobserved in the IR and near-IR (2000-15 000 cm⁻¹). The work obtains frequencies and relative intensities for all OH and CH stretching transitions. Comparison of the frequencies and intensities of CH and OH stretching transitions reveal interesting trends in acid chain length that are discussed. Literature values for acetic acid (CH₃COOH) and formic acid (HCOOH) are used to gain a broader understanding for the spectroscopy of the organic acids CH₃(CH₂)_nCOOH. The observation of several combination bands involving the CH and OH stretching vibrations and possible rotational isomer and hot band transitions are reported.     

Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

Low temperature catalytic performance of nanosized TiNiO for oxidative dehydrogenation of propane to propene

Nanosized TiNiO catalysts prepared by a modified sol-gel method have been investigated in the oxidative dehydrogenation of propane (ODP) to propene. At 300 °C the yield to propene of 12.1% was obtained on 9.1 wt.% TiNiO catalyst with the selectivity of 43%. The continued variety of lattice parameter and variation of chemical value of nickel and titanium ion on the surface indicates that there are strong interactions of TiO₂ and NiO. The decreased low temperature oxygen desorption and the weaker reducibility seems to be responsible for the decreased activity and enhanced selectivity of propane oxidative dehydrogenation over TiNiO catalysts.     

Reaction of acetonitrile with the silicon(0 0 1) surface: A combined XPS and FTIR study

The adsorption of acetonitrile on the Si(0 0 1) surface has been investigated using X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). XPS and FTIR spectra indicate that adsorbed acetonitrile forms two correlated binding configurations, a CN species with a strong FTIR absorption at 1540 cm⁻¹ and a CCN (ketenimine) species that has a very strong FTIR absorption at 1952 cm⁻¹. The CCN FTIR peak at 1952 cm⁻¹ shows a striking polarization dependence, with the infrared transition dipole almost entirely in the plane of the sample and parallel to the SiSi dimer axis. Our data suggests that the primary CCN structure results from cleavage of two C-H bonds, forming a structure in which the N and terminal C atom are both linked to the surface. Temperature-dependent experiments help to elucidate the complicated reaction mechanism for acetonitrile adsorbing onto the Si(0 0 1) surface. Dosing at higher temperature increases the amount of CCN relative to CN species while heating leads to direct transformation of the CN to the CCN species. Our results indicate that previous studies, which considered only products formed by cleavage of a single C-H bond, have misidentified the primary ketenimine product. A reinterpretation of the earlier results, combined with data presented here, sheds new light onto the products and mechanism of interaction of acetonitrile with Si(0 0 1).     

S180 cell growth on low ion energy plasma treated TiO2 thin films

X-ray photoelectron spectroscopy (XPS) was used to characterise the effects of low energy (<2 eV) argon ion plasma surface modification of TiO₂ thin films deposited by radio frequency (RF) magnetron sputter system. The low energy argon ion plasma surface modification of TiO₂ in a two-stage hybrid system had increased the proportion of surface states of TiO₂ as Ti³⁺. The proportion of carbon atoms as alcohol/ether (COX) was decreased with increase the RF power and carbon atoms as carbonyl (CO) functionality had increased for low RF power treatment. The proportion of C(O)OX functionality at the surface was decreased at low power and further increase in power has showed an increase in its relive proportion at the surface. The growth of S180 cells was observed and it seems that cells are uniformly spreads on tissue culture polystyrene surface and untreated TiO₂ surfaces whereas small-localised cell free area can be seen on plasma treated TiO₂ surfaces which may be due to decrease in C(O)OX, increase in CO and active sites at the surface. A relatively large variation in the surface functionalities with no change in the surface roughness was achieved by different RF plasma treatments of TiO₂ surface whereas no significant change in S180 cell growth with different plasma treatments. This may be because cell growth on TiO₂ was mainly influenced by nano-surface characteristics of oxide films rather than surface chemistry.     

Preparation of visible-light responsive PF-codoped TiO2 nanotubes

Fabrication of PF-codoped TiO₂ nanotubes was carried out using a one-step electrochemical anodization process by tailoring the composition of the electrolyte with the aim of PF-codoping to extend the optical absorption of TiO₂ to the visible-light region. The as-prepared PF-codoped TiO₂ nanotubes were characterized by SEM, XPS, and UV-vis diffuse reflectance absorption spectra (DRS). The results showed that the tube diameter of the nanotubes was approximately 100 nm and the tube length was approximately 510 nm. The phosphorus and fluorine were successfully doped into TiO₂ nanotubes, as evidenced by XPS. Moreover, the PF-codoped samples displayed remarkably strong visible-light response.     

A selective [4 + 2]-like cycloaddition of α, β-unsaturated ketone on Si(1 1 1)-7 × 7

The interaction of ethyl vinyl ketone (EVK) with Si(1 1 1)-7 × 7 has been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) calculations. The disappearance of both stretching vibrations of CH₂ (3099 cm⁻¹) and CO (1684 cm⁻¹) coupled with the appearance of new CC stretching mode (1660 cm⁻¹) in the HREELS spectra of chemisorbed EVK clearly demonstrates the direct involvement of conjugated CC and CO bonds to form a SiC¹H₂C²HC³(C⁴H₂C⁵H₃)OSi surface species via [4 + 2]-like cycloaddition in a highly selective manner. In addition, XPS studies show that the C1s binding energies of C¹/C² and C³ upon chemisorption display chemical downshifts of 0.8 eV and 2.2 eV, respectively, further confirming the proposed [4 + 2]-like cycloaddition reaction for the EVK/Si(1 1 1)-7 × 7 system. DFT theoretical calculations suggest that the proposed [4 + 2]-like cycloadduct is thermodynamically most favorable.     

Structural study of thin films prepared from tungstate glass matrix by Raman and X-ray absorption spectroscopy

Thin films were prepared using glass precursors obtained in the ternary system NaPO₃BaF₂WO₃ and the binary system NaPO₃WO₃ with high concentrations of WO₃ (above 40% molar). Vitreous samples have been used as a target to prepare thin films. Such films were deposited using the electron beam evaporation method onto soda-lime glass substrates. Several structural characterizations were performed by Raman spectroscopy and X-ray Absorption Near Edge Spectroscopy (XANES) at the tungsten L_I and L_III absorption edges. XANES investigations showed that tungsten atoms are only sixfold coordinated (octahedral WO₆) and that these films are free of tungstate tetrahedral units (WO₄). In addition, Raman spectroscopy allowed identifying a break in the linear phosphate chains as the amount of WO₃ increases and the formation of POW bonds in the films network indicating the intermediary behavior of WO₆ octahedra in the film network. Based on XANES data, we suggested a new attribution of several Raman absorption bands which allowed identifying the presence of WO⁻ and WO terminal bonds and a progressive apparition of WOW bridging bonds for the most WO₃ concentrated samples (above 40% molar) attributed to the formation of WO₆ clusters.     

Asymmetric surface modification of poly(ethylene terephthalate) film by CF4 plasma immersion

Poly(ethylene terephthalate) (PET) films were treated with CF₄ plasma immersion. The samples were processed at different RF powers and treatment time. The surface modification of PET films was evaluated by water contact angle (CA), X-ray photoelectron spectroscopy (XPS) and atomic force microscope (AFM). Decrease in contact angle of both sides of PET films was observed under mild treatment conditions. However, as raising treatment power and/or time, the change in contact angle between the two sides of PET films was different. The relatively hydrophobic and hydrophilic surfaces were being in situ formed on the two sides of PET films, respectively. And the extreme values of water contact angle reached 108.63 and 7.56°, respectively. XPS analyses revealed that there was a substantial incorporation of fluorine and/or oxygen atoms in both side surfaces. The relative chemical composition of the C (ls) spectra's showed the incorporation of non-polar fluorine-based functionalities (i.e. CFCF_n, CF₂ or CF₃ groups) and polar oxygen-based functionalities (i.e. COOH or OH groups) in the surfaces. Correlation between the plasma parameters and the surface modification of PET films is also discussed.     

Resonant Auger spectroscopy study of charge transfer phenomena in N 1s core-excited acetonitrile adsorbates on Si(0 0 1)-2 × 1

Acetonitrile (CH₃CN) adsorbs on Si(0 0 1)-2 × 1 at room temperature under two forms, a cycloaddition-like adduct (Si-CN-Si) and a pendent cyano (Si-CH₂-CN) resulting from the decomposition of the molecule. Resonant Auger spectroscopy has been used to study the excited-state-dependent electron transfer from the N 1s core-excited molecular adsorbate to the silicon substrate, using the core-hole lifetime (∼6 fs) as an internal clock. It is shown that the π_CN^∗ NEXAFS state lies within the silicon bandgap because of a core-excitonic effect. Therefore no charge transfer of the excited electron to the substrate is observed. On the other hand the π_CN^∗ NEXAFS state is placed within the silicon conduction band. Excitation to this orbital leads to valence/Auger spectra in which both resonant and normal Auger contributions are observed. Therefore there is evidence for a charge transfer from the pendent CN to the silicon surface, on a timescale estimated to tens of femtoseconds.     

Effect of oxidation on the optical and surface properties of AlGaN

The chemical properties of Al_xGa_1−xN surfaces exposed to air for different time periods are investigated by atomic force microscopy (AFM), photoluminescence (PL) measurement and X-ray photoelectron spectroscopy (XPS). PL and AFM results show that Al_xGa_1−xN samples exhibit different surface characteristics for different air-exposure times and Al contents. The XPS spectra of the Al 2p and Ga 2p core levels indicate that the peaks shifted slightly, from an AlN to an AlO bond and from a GaN to a GaO bond. All of these results show that the epilayer surface contains a large amount of Ga and Al oxides.     

Hydrogen related point defects in silicon based layers: Si(·)H and SiOOH

Layers prepared by pulsed TEA CO₂ pulsed laser ablation (PLA) of SiO and SiO₂ targets in helium were exposed to hydrogen and deuterium atmosphere up to several kPa. The deposited layers were investigated by FTIR, EPR and XP spectroscopy. Among various Si species silyl radical Si(·)H (Si(·)D) at 2166 (1568) cm⁻¹—H(I) center—and silyl hydroperoxide SiOOH (SiOOD) at 3587 (2648) cm⁻¹ were identified in FTIR spectra. Chemical pathways for production of these species are discussed. Experimental results are supported by quantum chemical calculations.     

CF4 radio frequency plasma surface modification of silicone rubber for use as outdoor insulations

For further prolonging the serve life of silicone rubber (SIR) for outdoor insulation and increasing its resistance of pollution flashover, surface modifications of SIR were carried out via CF₄ capacitively coupled plasma at radio frequency (RF) power of 60, 100 and 200 W for a treatment time up to 20 min under CF₄ flow rate of 20 sccm. Static contact angle measurement was employed to estimate the change of hydrophobicity of the modified SIR. The variation of the surface functional groups of the modified SIR was observed by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectrum and X-ray photoelectron spectroscopy (XPS). The surface topography was observed by atom force microscopy (AFM). The results indicate that the static contact angle of SIR surface is improved from 100.7° to 150.2° via the CF₄ plasma modification, and the super-hydrophobic surface of modified SIR, which corresponds to a static contact angle of 150.2°, appears at RF power of 200 W for a 5-min treatment time. According to the results, it is suggested that the formation of super-hydrophobic surface is ascribed to the co-action of the increase of roughness created by the ablation reaction of CF₄ plasma and the formation of [SiF_x(CH₃)_2−xO]_n (x = 1, 2) structure produced by the direct attachment of F atoms to Si.     

The role of methylene in prompt NO formation

We address the plausibility of singlet methylene (¹CH₂) in the prompt NO formation mechanism via examination of experimental species profiles and kinetic flame modeling of several low-pressure methane-oxygen-nitrogen flames. Existing kinetic models assuming CH as the only prompt NO precursor greatly underpredict NO formation under very fuel-lean conditions. We have constructed a kinetic pathway initiated by the recombination of singlet CH₂ with molecular nitrogen to form diazomethane, CH₂NN, early in the flame. Although the majority of the diazomethane is predicted to react with flame radicals to regenerate N₂, a small percentage (approximately 10%) is predicted to react via cleavage of the NN bond leading to NO formation. This leads to accurate prediction of the experimental measurements of NO formation in lean, low-pressure flames. Assuming reasonable kinetic parameters for the reactions of CH₂, the large underprediction of NO under lean conditions can be rectified by the inclusion of the ¹CH₂ prompt NO pathway in the kinetic mechanism.     

Improvement of photoluminescence properties of porous silicon by silica passivation

Porous silicon (PS) was passivated by silica film using a sol-gel method; the photoluminescence (PL) properties were significantly improved; namely, PL intensity and stability increased and PL peak shifted to shorter wavelength. Scanning electron microscope (SEM) and Fourier transformed infrared spectroscope (FTIR) results indicated that silica passivation produced a compact film on the PS surface and modified the surface state of PS. The number of stable surface bonds (HSiO₃, HSiSiO₂ and H₂SiO₂) increased due to the oxidation of SiH back-bonds during the gelation process, and thus the PL intensity and stability were improved. Moreover, the blue-shift of PL peak was determined due to the increase in the ratio of SiO/SiH.     

Ultrasound promoted the synthesis of N-propargylic β-enaminones

The synthesis of 14 novel N-propargylic β-enaminones from the reaction of β-alkoxy vinyltrihalomethyl[carboxyethyl] ketones [R³C(O)CHC(R¹)OMe, where R³ = CF₃, CCl₃, CO₂Et and R¹ = Me, Et, Pr, Bu, i-Pent, CH₂CH₂CO₂Me] with propargyl amines [R²NHCH₂CCH, where R² = Pr, PhCH₂] is reported. Yields, solvents and reaction times needed for reaction completion, by microwave irradiation (MW), conventional thermal heating (TH) and under ultrasound irradiation (US) are compared. The best results were obtained under US irradiation in good to excellent yields (70-93%).