An Electrochemical Impedance Immunosensor Based on Gold Nanoparticle‐Modified Electrodes for the Detection of HbA1c in Human Blood

A label‐free immunosensor for the detection of HbA1c was developed based on gold nanoparticle (AuNP)‐aryl diazonium salt modified glassy carbon (GC) electrode where transduction is achieved using electrochemical impedance spectroscopy (EIS). GC electrodes were first modified with 4‐aminophenyl (Ph‐NH₂) layers to which AuNPs were attached. Thereafter an oligo(ethylene glycol) (OEG‐COOH) species were covalently attached to the remaining free amine groups on the Ph‐NH₂ surface. The AuNP surfaces were further modified with Ph‐NH₂ followed by attachment of a glycosylated pentapeptide (GPP), an analogon to HbA1c. Exposure of this interface to anti‐HbA1c IgG resulted in a change in charge transfer resistance (R_ct) due to the anti‐HbA1c IgG selectively complexing to the surface bound GPP. To detect the amount of HbA1c, a competitive inhibition assay was employed where the surface bound GPP and HbA1c in solution compete for the anti‐HbA1c IgG antibodies. The higher the concentration of HbA1c, the less antibody binds to the sensing interface and the lower the change of R_ct. The response of the immunosensor is linear with the HbA1c% of total haemoglobin in the range of 0%–23.3%. This competitive inhibition assay can be used for the detection of HbA1c in human blood. The performance of the immunosensor for detection of HbA1c in human blood is comparable to the clinical laboratory method.     

Electrochemical pathway for the quantification of SERS enhancement factor

This communication presents a new pathway for the more precise quantification of surface-enhanced Raman scattering (SERS) enhancement factor via deducing resonance Raman scattering (RRS) effect from surface-enhanced resonance Raman scattering (SERRS). To achieve this, a self-assembled monolayer of 1,8,15,22-tetraaminophthalocyanatocobalt(II) (4α-Co^IITAPc) is formed on plasmon inactive glassy carbon (GC) and plasmon active GC/AuNP surface. The surfaces are subsequently used as common probes for electrochemical and Raman (RRS and SERRS) studies. The most crucial parameters required for the quantification of SERS substrate enhancement factor (SSEF) such as real surface area of GC/AuNPs substarte and the number of 4α-Co^IITAPc molecules contributing to RRS (on GC) and SERRS (on GC/AuNPs) are precisely estimated by cyclic voltammetry experiments. The present approach of SSEF quantification can be applied to varieties of surfaces by choosing an appropriate laser line and probe molecule for each surface.     

NaBH4-induced assembly of immobilized Au nanoparticles into chainlike structures on a chemically modified glass surface

A facile method of obtaining chainlike assemblies of gold nanoparticles (AuNPs) on a chemically modified glass surface based on NaBH(4) treatment is developed. Citrate-stabilized AuNPs (17 nm) are immobilized on a glutaraldehyde-functionalized glass surface and assembled into chainlike structures after treatment with aqueous sodium borohydride (NaBH(4)) solution. The production and morphology of the AuNP chainlike assemblies are controlled by the density of the immobilized NPs, the concentration of NaBH(4) solution, and the treatment time. The AuNP assemblies are stable in water and can undergo drying. X-ray photoelectron spectroscopic data show that the number of citrate ions on the AuNPs decreased by 43% after treatment with 5 mg/mL NaBH(4) solution. The NaBH(4)-induced partial removal of the citrate ions and the roughness of the glass surface greatly affect the binding force of AuNPs on the substrate. The immobilized AuNPs begin to move at the solid-liquid interface without desorbing when the strength of the binding force was decreased. These mobile NPs form chainlike assemblies under the driving force of van der Waals interaction and diffusion. This interface-based formation of chainlike assemblies of AuNPs may provide a simple protocol for the 1D assembly of other Au-coated colloidal nanoparticles.     

Designing stable redox-active surfaces: chemical attachment of an osmium complex to glassy carbon electrodes prefunctionalized by electrochemical reduction of an in situ-generated aryldiazonium cation

The production of stable redox-active layers on electrode surfaces can lead to improvements in electronic device design. Enhanced stability can be achieved by pretreatment of electrode surfaces to provide surface chemical functional groups for covalent tethering of redox complexes. Herein, we describe pretreatment of glassy carbon electrodes to provide surface carboxylic acid groups by electro-reduction of an in situ-generated aryl diazonium salt from 3-(4-aminophenyl)propionic acid. This surface layer is characterized by attenuated total reflection infrared spectroscopy, atomic force microscopy, and electrochemical blocking studies. The surface carboxylic acid generated is then used to tether an osmium complex, [Os(2,2'-bipyridyl)2(4-aminomethylpyridine)Cl]PF6, to provide a covalently bound redox-active monolayer, E(0) ' of 0.29 V (vs Ag/AgCl in phosphate buffer, pH 7.4), on the pretreated glassy carbon electrode. The layer proves stable to pH, temperature, and storage conditions, retaining electroactivity for at least 6 months.     

金纳米粒子的二步电解合成及表面增强拉曼散射活性研究

在超声条件下采用二步电解方法在十六烷基三甲基溴化铵/丙酮/水三组分体系中合成金纳米粒子. 首先采用恒电流或电位的阶跃方法, 使体系中生成较小的金纳米粒子并作为晶种; 接着采用电位双阶跃方法, 使金纳米粒子在原来基础上继续生长, 控制电解电量可获得不同大小的金纳米粒子. 通过静电作用在洁净的单晶硅片表面组装金纳米粒子, 获得具有不同形貌的硅片, 并以此作为表面增强拉曼散射基底, 以吡啶为探针分子, 研究了不同基底的表面增强拉曼散射活性, 结果表明吡啶谱峰强弱与纳米粒子在硅片表面的排列形貌有关.     

Light-activated covalent formation of gold nanoparticle-graphene and gold nanoparticle-glass composites

Monolayer protected gold nanoparticles (AuNPs) modified with a 3-aryl-3-(trifluoromethyl)diazirine functionality at its terminus (Diaz-AuNPs, 3.9 nm) were prepared and irradiated in the presence of two very different substrates, reduced graphene and glass. Upon irradiation, the terminal diazirine group loses nitrogen to generate a reactive carbene at the interface of the AuNPs that can then undergo addition or insertion reactions with functional groups on the graphene or glass surfaces, leading to the formation of graphene-AuNP and glass-AuNP hybrids, respectively. The AuNP hybrids were characterized using TEM, XRD, XPS, AFM, and UV-vis spectroscopy. Control experiments done in the absence of irradiation demonstrate that carbene activation is required for incorporation of significant AuNP onto the materials. The AuNP hybrids are robust and stable to excessive washing and centrifugation supporting the covalent nature of the interaction between the AuNP and the graphene or silicate glass substrates. Because the formation of the composite is light activated, it lends itself to photopatterning; this application is demonstrated for making the glass-AuNP composites.     

Towards the fabrication of label-free amperometric immunosensors using SWNTs

A label-free immunosensor based on the modulation of the electrochemistry of a surface bound redox species, to detect the presence of antibodies, is demonstrated. In this proof of concept study the model epitope was biotin and the model antibody was anti-biotin IgG. Glassy carbon (GC) electrode surfaces were first modified with 4-nitrophenyl groups by electrochemical reductive adsorption of the corresponding aryl diazonium salt. Subsequently, the nitro group was reductively converted into an amine, giving 4-aminophenyl groups. Oxidatively shortened single walled carbon nanotubes (SWNTs) were then covalently attached to the electrode via self-assembly; a procedure that has previously been shown to give SWNTs aligned normal to the surface. 1,1-Di(aminomethyl)ferrocene was attached to the carboxylic acid terminated SWNTs followed by attachment of biotin to the remaining free amine of the ferrocene derivative. Binding of anti-biotin IgG to the surface bound epitope resulted in attenuation of the ferrocene electrochemistry. This label-free immunosensor was successfully able to detect anti-biotin between 30 and 450 ng mL⁻¹.     

Improved Performance of an Amperometric Biosensor with Polydiaminonaphthalene on Electrochemically Deposited Au Nanoparticles

The performance of an enzyme sensor fabricated through covalent bond formation on the HRP‐bonded poly(1,8‐diaminonaphthalene) (polyDAN) layer with gold nanoparticles (AuNPs) was applied to catalyze the electrochemical reduction of H₂O₂. The surface characteristics of the sensor probe were studied using cyclic voltammetry, SEM, XPS, QCM, and impedance spectroscopy. The AuNP‐deposited surface resulted in higher conductivity and sensitivity for H₂O₂ detection in phosphate buffer solution. A linear calibration plot was obtained in the H₂O₂ concentration range between 10.0 μM and 25.0 mM with detection limit 5.0±1.25 μM. The lifetime of HRP/polyDAN/AuNP/GC probe was over 70 days without response loss.     

A Comparative Study of the Modification of Gold and Glassy Carbon Surfaces with Mixed Layers of In Situ Generated Aryl Diazonium Compounds

In situ generated aryl diazonium cations were synthesized in the electrochemical cell by reaction of the corresponding amines with NaNO₂ in aqueous HCl. This paper reports a study of the formation of mixed layers from in situ generated aryl diazonium cations. Firstly, glassy carbon (GC) and gold electrode surfaces were modified with five single in situ generated aryl diazonium salts to obtain their corresponding reductive potential followed by the modification of GC and gold surfaces with eight binary mixed layers of in situ generated aryl diazonium salts. The difference between GC and gold surfaces in terms of in situ formation of two‐component aryl diazonium salt films was compared. The behavior of the mixed layers formed from in situ generated aryl diazonium salts relative to diazonium salts that were pre‐synthesized prior to surface modification was also investigated. Cyclic voltammetry and X‐ray photoelectron spectroscopy were used to characterize the resulting modified GC and gold surfaces. It is found that for some aryl diazonium salts the potential at which reductive adsorption is achieved on gold and GC surfaces is significantly different. For the eight sets of binary mixed layers, the species with more anodic potential are more difficult to attach to the both GC and gold surfaces. The behavior of the mixed layers formed from in situ generated aryl diazonium salts and the pre‐synthesized diazonium salts is similar; which emphasizes the advantage of the in situ approach without any apparent difference in behavior to the presynthesized diazonium salts.     

Surface functionalization of ultrananocrystalline diamond films by electrochemical reduction of aryldiazonium salts

The surface functionalization of ultrananocrystalline diamond (UNCD) thin films via the electrochemical reduction of aryl diazonium cations is described. The one-electron-transfer reaction leads to the formation of solution-based aryl radicals, which in turn react with the UNCD surface forming stable covalent C-C bonds. Cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), ac impedance spectroscopy, and contact angle measurements have been employed to characterize the organic overlayer and estimate the surface coverage. The grafting of 3,5-dichlorophenyl groups renders the UNCD surface hydrophobic, whereas the attachment of 4-aminophenyl groups makes the surface relatively hydrophilic. The surface coverage, estimated from the electrochemical and XPS measurements, is as high as 70% of a compact monolayer. The aminophenyl terminated surface was obtained by electrochemical reduction of the tethered nitrophenyl groups. This two-step approach yields a UNCD surface with functional moieties available for the potential covalent coupling of a wide variety of biomolecules (e.g., DNA and proteins).     

Nanowires of 3-D cross-linked gold nanoparticle assemblies behave as thermosensors on silicon substrates

In this study, we used a novel fabrication process, involving electron beam lithography and oxygen plasma treatment, to generate line and dot patterns of (3-mercaptopropyl)trioxysilane units over a large area of the Si(100) surface for gold nanoparticle (AuNP) immobilization. We synthesized the AuNPs in a two-phase system for assembly onto the Si substrate through coordination to the thiol groups of the protecting organic shell patterns. The resulting bottom layer of AuNPs was then treated with 1,6-hexanedithiol to generate thiol groups on their surfaces, thereby allowing the bottom-up construction of multiple layers of three-dimensional cross-linked AuNP assemblies, so-called poly(AuNP), linked directly to the Si substrate. We fabricated nanowires of cross-linked three-layer poly(AuNP) over large areas, with resolutions ranging from 200?nm to 10???m. The nanowires of the poly(AuNP) underwent dramatic changes in their electrical resistivities and morphologies when melting began at a temperature of 140°C. For example, the resistivity of the nanowires assembled from three layers of poly(AuNP) at a width of 1???m increased rapidly from 8.99?×?10^?C4 to 9,471??? m upon increasing the temperature from room temperature to 140°C. Such microwires assembled from lines of poly(AuNP) might, therefore, be applicable as thermosensors on Si surfaces in devices miniaturized to the nanoscale.     

Electrocatalytic Reduction of Oxygen at Glassy Carbon Electrodes Coated with Diazonium‐derived Porphyrin/Metalloporphyrin Films

In this study, the influence of the film structure was investigated on the electrocatalytic oxygen reduction at GC electrodes covered with porphyrin and metalloporphyrin rings via the diazonium modification method. For that purpose, primarily, tetraphenylporphyrin (TPP) films on GC electrode surfaces were prepared by electroreduction of in situ generated diazonium salts of 5‐(4‐aminophenyl)‐10,15,20‐triphenylporphyrin (APP) and 5,10,15,20‐tetrakis(4‐aminophenyl)porphyrin (TAPP) molecules. Next, the formation of metalloporphyrin films on the modified surfaces was accomplished through the complexation reactions of surface porphyrin rings with metal ions in the salt solutions containing Mn(II), Fe(III) and Co(II) ions. The resulting porphyrin and metalloporphyrin layers were identified with XPS and ICP‐MS. The electrochemical barrier properties of the films on GC surfaces were examined by cyclic voltammetry in K₃Fe(CN)₆ aqueous solution. The electrocatalytic abilities of the resulting films were also investigated for the oxygen electrochemical reduction by employing cyclic voltammetry in PBS solutions saturated with oxygen. The results showed that the oxygen reduction potentials on modified GC electrodes were shifted to less negative potentials compared to that of bare GC electrode. Also, it was obtained that the oxygen reduction reaction was more effective on the GC electrodes modified with TPP rings by using TAPP molecules than those prepared by using APP molecules.     

Electrochemical Characterization and Electrocatalytic Application of Gold Nanoparticles Synthesized with Different Stabilizing Agents

Gold nanoparticles (AuNPs) have unique properties, making them attractive for electronic and energy‐conversion devices and as (electro)catalysts for electrochemical sensors. In addition to the size and shape of AuNPs, the electrocatalytic properties of AuNP‐sensors are also determined by the stabilizing agent used in their synthesis. Here, AuNPs were synthesized with citrate, alginate and quercetin, obtaining spherical and negatively charged nanoparticles. The AuNPs were used to modify glassy carbon electrodes (AuNPs/GCE), which were characterized by scanning electron microscopy and electrochemical techniques. The AuNPs/GCE showed aggregates of different sizes and degrees of dispersion on the electrode surface depending on the stabilizing agent. The AuNP's aggregates affect the homogeneity of the film, the reproducibility of the electrodes and their response in buffer solution. Finally, to evaluate the electrocatalytic ability of the AuNPs/GCE, we studied the oxidation of two analytes with opposite charges: (1) sunset yellow (negative) and (2) hydrazine (positive). Compared with GCE, the AuNPs/GCE showed good electrocatalytic properties for hydrazine, increasing the current up to 50 % and shifting the potential by almost 400 mV, depending on the AuNP used. For the negatively charged analyte, the current decreased up to 50 % and no shift in potential was observed. Thus, the electrocatalytic properties of the AuNPs showed to be highly dependent on the nature of the analyte.     

Light‐Induced Reversible Self‐Assembly of Gold Nanoparticles Surface‐Immobilized with Coumarin Ligands

A novel light‐induced reversible self‐assembly (LIRSA) system is based on the reversible photodimerization and photocleavage of coumarin groups on the surface of gold nanoparticles (AuNPs) in THF solution. Facilitated by coumarin groups, light irradiation at 365 nm triggers the stable assembly of monodisperse AuNPs; the resulting self‐assembly system can be disassembled back to the disassembled state by a relatively short exposure to benign UV light. The reversible self‐assembly cycle can be repeated 4 times. A specific concentration range of coumarin ligand and the THF solvent were identified to be the two predominant factors that contribute to the LIRSA of AuNPs. This is the first successful application of reversible photodimerization based on a coumarin derivative in the field of AuNP LIRSA. This LIRSA system may provide unique opportunities for the photoregulated synthesis of many adjustable nanostructures and devices.     

Photoisomerization of azobenzene derivatives confined in gold nanoparticle aggregates

Photoisomerization is an important reaction that confers photoresponsive functionality on nanoparticles. Although photoisomerization of molecules forming self-assembled monolayers on two-dimensional surfaces or three-dimensional clusters has been studied, a detailed picture of interactions of molecules undergoing isomerization with nanoparticles is not available. In this paper, we report on the photoisomerization of azobenzene derivatives spatially confined in gold nanoparticle (AuNP) aggregates. AuNP aggregates allow us to simultaneously probe the structural changes of molecules via surface-enhanced Raman spectroscopy (SERS) and the accompanying changes in interparticle interactions via surface plasmon couplings. AuNP aggregates are formed by the adsorption of synthesized azobenzene-derivatized sulfides (Az) onto the surfaces of AuNPs. The photoisomerization of the adsorbed Az from trans to cis by excitation at 365 nm causes the AuNPs to move close to each other in the aggregates, leading to a redshift of the surface plasmon coupling band in the UV-vis spectra and a concomitant rise in SERS intensity. SERS spectra reveal that the vibrational modes containing the N=N stretching character redshift upon irradiation, suggesting that the N=N bond is significantly weakened when Az is in the cis form in the AuNP aggregates. The weakening of the N=N bond is attributed to the interaction of the N=N bond, which is more exposed to the outside in the cis conformation, with the nearby AuNPs that have come closer by the isomerization of adsorbed Az. We find that backisomerization from cis to trans occurs much faster in the AuNP aggregates (k = 1.9 × 10(-2) min(-1)) than in solution (k = 1.3 × 10(-3) min(-1)) because of the reduced N=N bond order of cis-Az in the aggregates.     

Nanocatalyst-based assay using DNA-conjugated Au nanoparticles for electrochemical DNA detection

Compared to enzymes, Au nanocatalysts show better long-term stability and are more easily prepared. Au nanoparticles (AuNPs) are used as catalytic labels to achieve ultrasensitive DNA detection via fast catalytic reactions. In addition, magnetic beads (MBs) are employed to permit low nonspecific binding of DNA-conjugated AuNPs and to minimize the electrocatalytic current of AuNPs as well as to take advantage of easy magnetic separation. In a sandwich-type electrochemical sensor, capture-probe-conjugated MBs and an indium-tin oxide electrode modified with a partially ferrocene-modified dendrimer act as the target-binding surface and the signal-generating surface, respectively. A thiolated detection-probe-conjugated AuNP exhibits a high level of unblocked active sites and permits the easy access of p-nitrophenol and NaBH 4 to these sites. Electroactive p-aminophenol is generated at these sites and is then electrooxidized to p-quinoneimine at the electrode. The p-aminophenol redox cycling by NaBH 4 offers large signal amplification. The nonspecific binding of detection-probe-conjugated AuNPs is lowered by washing DNA-linked MB-AuNP assemblies with a formamide-containing solution, and the electrocatalytic oxidation of NaBH 4 by AuNPs is minimized because long-range electron transfer between the electrode and the AuNPs bound to MBs is not feasible. The high signal amplification and low background current enable the detection of 1 fM target DNA.     

DNA aptamer folding on gold nanoparticles: from colloid chemistry to biosensors

We have investigated the effect of the folding of DNA aptamers on the colloidal stability of gold nanoparticles (AuNPs) to which an aptamer is tethered. On the basis of the studies of two different aptamers (adenosine aptamer and K+ aptamer), we discovered a unique colloidal stabilization effect associated with aptamer folding: AuNPs to which folded aptamer structures are attached are more stable toward salt-induced aggregation than those tethered to unfolded aptamers. This colloidal stabilization effect is more significant when a DNA spacer was incorporated between AuNP and the aptamer or when lower aptamer surface graft densities were used. The conformation that aptamers adopt on the surface appears to be a key factor that determines the relative stability of different AuNPs. Dynamic light scattering experiments revealed that the sizes of AuNPs modified with folded aptamers were larger than those of AuNPs modified with unfolded (but largely collapsed) aptamers in salt solution. From both the electrostatic and steric stabilization points of view, the folded aptamers that are more extended from the surface have a higher stabilization effect on AuNP than the unfolded aptamers. On the basis of this unique phenomenon, colorimetric biosensors have been developed for the detection of adenosine, K+, adenosine deaminase, and its inhibitors. Moreover, distinct AuNP aggregation and redispersion stages can be readily operated by controlling aptamer folding and unfolding states with the addition of adenosine and adenosine deaminase.     

Multi-technique Characterization of Self-assembled Carboxylic Acid Terminated Alkanethiol Monolayers on Nanoparticle and Flat Gold Surfaces

Gold nanoparticles (AuNPs) with 14, 25 and 40nm diameters were functionalized with different chain length (C6, C8, C11 and C16) carboxylic acid terminated alkanethiol self-assembled monolayers (COOH-SAMs). X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were used to examine the changes in surface chemistry as both AuNP diameter and SAM chain length were varied. COOH-SAMs on flat gold surfaces were also examined and compared to the COOH-SAM on AuNP results. For a given surface, as the COOH-SAM chain length increased the XPS C/Au atomic ratio increased due to an increased number of carbon atoms per molecule in the overlayer and an increased attenuation of the Au substrate signal. For the C16 COOH-SAMs, as the size of AuNPs decreased the XPS C/Au atomic ratio and the apparent SAM thickness increased due to the increased curvature of the smaller AuNPs. The C16 COOH-SAMs on the flat Au had the lowest XPS C/Au atomic ratio and apparent SAM thickness of any C16 COOH-SAM covered Au surface. The effective take-off angles of the COOH-SAMs were also calculated by comparing the apparent thickness of COOH-SAMs with literature values. The effective take-off angle for C16 COOH-SAM on 14nm, 25nm and 40nm diameter AuNPs and flat Au were found to be 57°, 53°, 51° and 39°, respectively, for data acquired in a mode that collects a wide range of photoelectron take-off angles. The effective take-off angle for C16 COOH-SAM on 14nm AuNP and flat Au decreased to 52° and 0°, respectively, for data acquired in a mode that collects a narrow range of photoelectron take-off angles. The ToF-SIMS results showed similar changes in surface chemistry with COOH-SAM chain length and AuNP size. For example, the ratio of the sum of the C(1-4)H(x)O(y) positive ion intensities to the sum of the Au-containing positive ions intensities increased with decreasing AuNP size and increasing COOH-SAM chain length. Fourier transform IR spectroscopy in the attenuated total reflectance mode (FTIR-ATR) was used to characterize the crystallinity of the COOH-SAMs. The CH(2) stretching frequencies decreased with increasing COOH-SAM chain length on flat Au. The C16 COOH-SAM on the 14nm AuNPs exhibited a crystalline-like CH(2) stretching frequency. The size, size distribution, shapes and solution stability of AuNPs were investigated with transmission electron microscopy (TEM) and UV/VIS spectroscopy. As the average diameter of the AuNPs decreased the size distribution became narrower and the shape became more spherical.     

The electrochemical behavior of some podands at a benzo[c]cinnoline modified glassy carbon electrode

This paper describes the grafting of benzo[c]cinnoline (BCC) molecules on glassy carbon (GC) electrode surface. The attachment of BCC molecules to carbon substrate is induced by the electrochemical reduction of the corresponding diazonium salt. The modification of GC with BCC diazonium salt was done in aprotic solution and proved by blocking of dopamine electron transfer. The presence of BCC at the GC surface was characterized by cyclic voltammetry and X-ray photoelectron spectroscopy (XPS). On modified surface, the electrochemical behavior of two different types of podands and the catalytic effects of the GC-BCC surface were studied. The XPS was used to monitor element characteristics of the adsorbates on the GC surface and confirm the attachment of BCC molecules to the GC surface.     

An ultrasensitive hydrogen peroxide biosensor based on electrocatalytic synergy of graphene–gold nanocomposite, CdTe–CdS core–shell quantum dots and gold nanoparticles

We first reported an ultrasensitive hydrogen peroxide biosensor in this work. The biosensor was fabricated by coating graphene–gold nanocomposite (G–AuNP), CdTe–CdS core–shell quantum dots (CdTe–CdS), gold nanoparticles (AuNPs) and horseradish peroxidase (HRP) in sequence on the surface of gold electrode (GE). Cyclic voltammetry and differential pulse voltammetry were used to investigate electrochemical performances of the biosensor. Since promising electrocatalytic synergy of G–AuNP, CdTe–CdS and AuNPs towards hydrogen peroxide was achieved, the biosensor displayed a high sensitivity, low detection limit (S/N = 3) (3.2 × 10⁻¹¹ M), wide calibration range (from 1 × 10⁻¹⁰ M to 1.2 × 10⁻⁸ M) and good long-term stability (20 weeks). Moreover, the effects of omitting G–AuNP, CdTe–CdS and AuNP were also examined. It was found that sensitivity of the biosensor is more 11-fold better if G–AuNP, CdTe–CdS and AuNPs are used. This could be ascribed to improvement of the conductivity between graphene nanosheets in the G–AuNP due to introduction of the AuNPs, ultrafast charge transfer from CdTe–CdS to the graphene sheets and AuNP due to unique electrochemical properties of the CdTe–CdS, and good biocompatibility of the AuNPs for horseradish peroxidase. The biosensor is of best sensitivity in all hydrogen peroxide biosensors based on graphene and its composites up to now.