Preparation,characterization and catalytic activity studies of organoruthenium‐supported polyoxotungstates on SBA‐15

Organoruthenium‐supported polyoxometalates [(RuC₆H₆)XW₉O₃₄]^7? (XWRu; X = As, P) were selected as samples to study their catalytic activities towards the solvent‐free oxidation of n‐hexadecane. First of all, the XWRu were deposited on 3‐aminopropyltriethoxysilane‐modified SBA‐15 to prepare solid catalysts, which were characterized using powder X‐ray diffraction, nitrogen adsorption measurements, Fourier transform infrared reflectance spectroscopy and X‐ray photoelectron spectroscopy. Subsequently, their catalytic performances and stabilities were assessed through the oxidation of n‐hexadecane using air as the oxygen source without any additives and solvents, and the influences of the loading amount, catalyst amount, reaction time and reaction temperature on the catalytic activities were investigated. The results indicated the influence of the central heteroatoms X of XWRu on the catalytic activities. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis,characterization and catalytic activity in Suzuki–Miyaura coupling of palladacycle complexes with n‐butyl‐substituted N‐heterocyclic carbene ligands

A series of monomeric palladacycle complexes bearing n‐butyl‐substituted N‐heterocyclic carbenes, namely [Pd(NHC)X(dmba)] (dmba: dimethylbenzylamine and [Pd(NHC)X(ppy)]; NHC: 1‐n‐butyl‐3‐substituted benzylimidazol‐2‐ylidene; ppy: 2‐phenylpyridine), were prepared either by transmetallation from the corresponding silver carbene complexes or by the reaction of the corresponding acetate‐bridged palladacycle dimer with N‐heterocyclic carbene ligands in high yields. The palladium(II) complexes were characterized using elemental analyses, APCI‐MS, ¹H NMR and ¹³C NMR spectroscopies. These complexes are efficient in the Suzuki–Miyaura coupling reaction between phenylboronic acid and aryl bromides.     

Liquid‐phase α‐Pinene Isomerization over Fe‐doped Sulfated Zirconia Prepared by a Hydrothermal Treatment‐assisted Process

A series of Fe‐doped (0.5%–3%) sulfated zirconia have been prepared by a hydrothermal treatment‐assisted process. Textural and structural characterizations of the as‐synthesized materials were performed by means of N₂ adsorption, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy and thermogravi‐ metric analysis. Temperature‐programmed desorption of ammonia was used to determine the acidity of the samples. The effects of Fe‐doping on the structure, acidity and catalytic activity of sulfated zirconia for liquid‐phase α‐pinene isomerization were investigated. The incorporation of small amounts of Fe into sulfated zirconia results in the increase of sulfate content and the number of acid sites, which is responsible for the enhanced activity of Fe‐doped catalysts in comparison with the undoped one. Meanwhile, hydrothermal treatment helps to improve the activity of the catalyst.     

Synthesis and Structure of a Series of New Molybdenum(VI) Complexes with the Esters of 2‐Mercaptonicotinic Acid

The novel dioxomolybdenum(VI) complexes with methyl ( 1 ), ethyl ( 2 ), n‐propyl ( 3 ), i‐propyl ( 4 ), n‐butyl ( 5 ) and cyclohexyl ( 6 ) ester of 2‐mercaptonicotinic acid have been prepared in the reactions of MoO₂Cl₂ and MoO₂(acac)₂ (acac = 2,4‐pentandionate) with mercaptonicotinic acid in corresponding alcohol. The esterification reaction was catalyzed by Mo^V originated from the reduction of Mo^VI with mercaptonicotinic ‐SH group with simultaneous formation of S–S bond resulting from the condensation of two 2‐mercaptonicotinic molecules. The presence of Mo^V was proved by ESR spectra. The molecular and crystal structures of 1 , 2 , 3 and 4 as well as of the by‐products 1,1′‐dithio‐2,2′‐n‐butylnicotinoate ( 7 ) and tetramethylammonium hexachloromolybdate(V) ( 8 ) have been determined by a X‐ray single crystal diffraction. The complexes 1 – 4 contain MoO₂²⁺ core with octahedral coordination of each molybdenum atom complexed by two 2‐mercaptonicotinato N and S donor atoms.     

Preparation of N‐n‐Octyl‐D‐glucamine by the catalytic hydrogenation with palladium complex of MgO‐supported melamine‐formaldehyde polymer

The palladium complex of MgO‐supported melamine‐formaldehyde polymer catalyst was prepared and characterized by X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The preparation of N‐n‐octyl‐D ‐glucamine was investigated by using this complex as the catalyst. It was found that the palladium complex of MgO‐supported melamine‐formaldehyde polymer has a good catalytic activity for the hydrogenation of n‐octylamine with D ‐glucose to produce N‐n‐octyl‐D ‐glucamine. The effects of additive, solvent, temperature, hydrogen pressure, Pd content in the catalyst and the amount of catalyst on the preparation of N‐n‐octyl‐D ‐glucamine have all been studied. Under the optimum experimental conditions—D ‐glucose, 37.2 mmol; n‐octylamine, 31 mmol; triethylamine, 1.0 ml; ethanol, 60 ml; temperature, 333 K; hydrogen pressure, 1.5 MPa; the amount of the catalyst (Pd content 3.55%, N/Pd molar ratio 12), 0.7 g—the highest yield of N‐n‐octyl‐D ‐glucamine (57.6%) was obtained. XRD results show that melamine‐formaldehyde polymer changed the structure of MgO, and XPS results suggest that coordination bonds were formed between the hexatomic ring and metal atom, and palladium particles were immobilized on the polymer. Copyright © 2004 John Wiley & Sons, Ltd.     

Novel organotin‐containing shell‐cross‐linked knedel and core‐cross‐linked knedel: Synthesis and application in catalysis

A series of novel organotin‐containing core‐cross‐linked knedels and shell‐cross‐linked knedels were first synthesized facilely from poly(styrene)‐b‐poly(acrylate acid) nanoparticles in different selective solvents [Tetrahydrofuran (THF)/H₂O or THF/n‐octane] by using organotin compound 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane as a new cross‐linker. The formation of the 1‐chloro‐3‐carboxylato‐tetra‐n‐butyl‐distannoxane layer in our cross‐linking reaction was supported by Fourier transform infrared (FT‐IR) and inductive coupled plasma emission spectrometer (ICP) analysis of the resulting shell‐cross‐linked knedels and core‐cross‐linked knedels. Transmission electron microscopy (TEM) study showed the spherical morphology and the size of the core‐cross‐linked knedels and shell‐cross‐linked knedel. Especially, the layer structure of the core‐cross‐linked knedels was clearly displayed in TEM image. The increase of extent of cross‐linking lead to the increasing of diameter for the shell‐cross‐linked knedels, whereas there was no significant effect on the core‐cross‐linked knedels. Dynamic light scattering (DLS) measurements gave hydrodynamic diameters of the core‐cross‐linked knedels that were in agreement with the TEM diameters. Moreover, the wall thickness of the shell layer of the core‐cross‐linked knedels could be easily modified by varying the block copolymer composition. Notably, the organotin‐containing core‐cross‐linked knedel exhibited highly efficient catalytic activity for the aqueous esterification reaction under nearly neutral conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Excellent alkene epoxidation catalytic activity of macrocyclic‐based complex of dioxo‐Mo(VI) on supermagnetic separable nanocatalyst

A phenoxybutane‐based Schiff base complex of cis‐dioxo‐Mo(VI) was supported on paramagnetic nanoparticles and characterized using powder X‐ray diffraction, infrared, diffuse reflectance and atomic absorption spectroscopies, scanning and transmission electron microscopies and vibrating sample magnetometry. The separable nanocatalyst was tested for the selective epoxidation of cyclohexene, cyclooctene, styrene, indene, α‐pinene, 1‐octene, 1‐heptene, 1‐dodecene and trans‐stilbene using tert‐butyl hydroperoxide (80% in di‐tert‐butyl peroxide–water, 3:2) as oxidant in chloroform. The catalyst was efficient for oxidation of cyclooctene with 100% selectivity for epoxidation with 98% conversion in 10 min. We were able to separate magnetically the nanocatalyst using an external magnetic field and used the catalyst at least six successive times without significant decrease in conversion. The turnover frequency of the catalyst was remarkable (2556 h^?1 for cyclooctene). The proposed nanomagnetic catalyst has advantages in terms of catalytic activity, selectivity, catalytic reaction time and reusability by easy separation.     

Binuclear meta‐xylyl‐linked Ag(I)‐N‐heterocyclic carbene complexes of N‐alkyl/aryl‐alkyl‐substituted bis‐benzimidazolium salts: synthesis,crystal structures and in vitro anticancer studies

Salts of meta‐xylyl‐linked N‐ethyl/n‐butyl/benzyl‐substituted bis‐benzimidazolium having hexafluorophosphate counterions have been synthesized. The corresponding binuclear Ag(I)‐N‐heterocyclic carbene complexes were prepared by the reaction of Ag₂O. The N‐heterocyclic carbene (NHC) ligand precursor 7 and Ag(I)–NHC complexes 10 and 11 have been structurally characterized by single‐crystal X‐ray diffraction technique. All of the reported compounds have been tested for their anticancer activity using human colorectal (HCT 116) cancer cell lines. Sterically varied benzimidazolium salts displayed significant activity against HCT 116 cell line, yielding IC₅₀ values in the range 0.1–19.4 µ m , while Ag(I)–carbene complexes showed exceptionally good activity (0.2–1.3 µ m ) against tested cancer cell lines. Copyright © 2013 John Wiley & Sons, Ltd.     

Diethyldisulfoammonium chlorometallates as heterogeneous Brønsted–Lewis acidic catalysts for one‐pot synthesis of 14‐aryl‐7‐(N‐phenyl)‐14H‐dibenzo[a,j]acridines

A new series of Brønsted–Lewis acidic diethyldisulfoammonium chlorometallates, [DEDSA][FeCl₄] and [DEDSA]₂[Zn₂Cl₆], were synthesized as solid materials from the reaction of [(Et)₂N(SO₃H)₂][Cl] ionic liquid with transition metal chlorides (FeCl₃ and ZnCl₂) at 80 °C in neat condition for 2 h. The chlorometallates were fully characterized using various spectroscopic and analytical techniques such as Fourier transform infrared, UV–visible and Raman spectroscopies, powder X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray and thermogravimetric analyses, Hammett acidity and elemental analyses. Their catalytic activity was studied as reusable heterogeneous catalysts for the three‐component synthesis of novel 14‐aryl‐7‐(N‐phenyl)‐14H‐dibenzo[a,j]acridines under solvent‐free conditions at 100 °C.     

Efficient and recyclable novel Ni‐based metal–organic framework nanostructure as catalyst for the cascade reaction of alcohol oxidation–Knoevenagel condensation

A novel Ni‐based metal–organic framework (Ni‐MOF) with a Schiff base ligand as an organic linker, Ni₃(bdda)₂(OAc)₂?6H₂O (H₂bdda = 4,4′‐[benzene‐1,4‐diylbis(methylylidenenitrilo)]dibenzoic acid), was synthesized and characterized using powder X‐ray powder diffraction, thermogravimetric analysis, Brunauer–Emmett–Teller measurements, inductively coupled plasma atomic emission spectroscopy, transmission electron microscopy, elemental analysis and Fourier transform infrared spectroscopy. The synthesized Ni‐MOF exhibited a high catalytic activity in benzyl alcohol oxidation using tert‐butyl hydroperoxide under solvent‐free conditions. Also, the efficiency of the catalyst was investigated in the cascade reaction of oxidation–Knoevanagel condensation under mild conditions. The Ni‐MOF catalyst could be recovered and reused four times without significant reduction in its catalytic activity.     

Novel quasi‐scorpionate ligand structures based on a bis‐N‐heterocyclic carbene chelate core: synthesis,complexation and catalysis

A series of novel quasi‐scorpionate CNC donor ligands, MeC(2‐C₅H₄N){CH₂(imidazole‐R)} (R = methyl, n‐butyl, n‐propenyl), in which a chelating bis(NHC) core is supplemented by a hemi‐labile pyridyl donor, were prepared. The coordination chemistry of these ligands was investigated with silver, palladium, rhodium and iridium. The single crystal X‐ray structures of [Rh(NC₂^Me)(COD)]Cl 8a and [Ir(NC₂^Pr)(COD)]Br 9b were determined. The catalytic potential of the rhodium and iridium complexes was assessed in the transfer hydrogenation of ketones; the iridium complexes, which show superior performance, form very effective and stable catalysts. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,characterization, and structural investigations of 1‐amino‐3‐substituted‐1,2,3‐triazolium salts,and a new route to 1‐substituted‐1,2,3‐triazoles

Quarternary salts based upon 3‐alkyl substituted 1‐amino‐1,2,3‐triazolium cations (alkyl = methyl, ethyl, nypropyl, 2‐propenyl, and n‐butyl) have been synthesized and characterized by vibrational spectra, multinuclear NMR, elemental analysis, and DSC studies. Subsequent diazotization of these salts results in the exclusive formation of 1‐alkyl‐1,2,3‐triazoles. Single crystal X‐ray studies were carried out for 1‐amino‐3‐methyl‐1,2,3‐triazolium iodide, 1‐amino‐3‐ethyl‐1,2,3‐triazolium bromide, 1‐amino‐3‐n‐propyl‐1,2,3‐triazolium bromide, and 1‐amino‐3‐n‐butyl‐1,2,3‐triazolium bromide as well as the starting heterocycle, 1‐amino‐1,2,3‐triazole, and all of the structures are discussed.     

Rare‐earth‐catalyzed alternating copolymerization of carbon monoxide with styrene

Rare‐earth acetates were used to catalyze the copolymerization reaction of carbon monoxide and styrene. Cupric acetate, 1,10‐phenanthroline, p‐toluenesulfonic acid, and 1,4‐benzoquinone were also added to the catalyst system. The structures of the copolymers obtained were characterized with IR, ¹H NMR, ¹³C NMR, wide‐angle X‐ray diffraction, and elemental analysis methods. The relationship between the catalytic activity and the catalyst composition was studied in detail. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 642–649, 2002; DOI 10.1002/pola.10147     

Preparation and characterization of a silica‐based magnetic nanocomposite and its application as a recoverable catalyst for the one‐pot multicomponent synthesis of quinazolinone derivatives

An environmentally benign magnetic silica‐based nanocomposite (Fe₃O₄/SBA‐15) as a heterogeneous nanocatalyst was prepared and characterized using Fourier transform infrared and ultraviolet–visible diffuse reflectance spectroscopies, scanning electron microscopy, X‐ray diffraction, vibrating sample magnetometry and Brunauer–Emmett–Teller multilayer nitrogen adsorption. Its catalytic activity was investigated for the one‐pot multicomponent synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones starting from isatoic anhydride, ammonium acetate and various aldehydes under mild reaction conditions and easy work‐up procedure in refluxing ethanol with good yields. The nanocatalyst can be recovered easily and reused several times without significant loss of catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

New Aspects of 1,3‐Diphosphacyclobutane‐2,4‐diyls

1,3‐Di(tert‐butyl)‐2,4‐bis[2,4,6‐tri(tert‐butyl)phenyl]‐1,3‐diphosphacyclobutane‐2,4‐diyl was formed from [2,4,6‐tri(tert‐butyl)phenyl]phosphaacetylene and t‐BuLi. In addition, the X‐ray diffraction analysis was carried out, together with theoretical calculations of the structure and NMR data.     

Preparation of Fe@Cu‐BDC and its catalytic performance for benzene hydroxylation

Novel Fe@Cu‐BDC catalysts were synthesized by adsorbing various contents of Fe ions on the surface and into the channels of Cu‐BDC support through an in situ method under ultrasonication. The structure of the catalysts was characterized using X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectrometry, X‐ray photoelectron spectroscopy and thermogravimetric analysis. The catalytic activity of catalysts for benzene hydroxylation was evaluated. The results showed that the Fe@Cu‐BDC catalysts had favorable catalytic activity for benzene hydroxylation. The yield of products can reach ca 37% and the selectivity of phenol can reach ca 62% over the 6% Fe@Cu‐BDC catalyst at 60°C in a reaction time of 75 min. Furthermore, the contents of Fe and solvent played a key role in benzene hydroxylation. After the reaction, the catalyst could be easily separated from the reaction mixture by centrifugation and reused for five times without significant decrease in activity.     

Intramolecular O‐arylation using nano‐magnetite supported N‐heterocyclic carbene‐copper complex with wingtip ferrocene

Nano‐magnetite supported N‐heterocyclic carbene‐copper complex with wingtip ferrocene has been prepared via multi‐step procedure. The complex has been characterized by various analytical techniques such as fourier transform infrared (FT‐IR), fourier transform Raman (FT‐Raman), X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) analysis. The catalytic activity of the complex has been exploited in intramolecular O‐arylation of o‐iodoanilides under heterogeneous conditions. The complex could be successfully recycled up to twelve consecutive cycles.     

Iron promotion of V‐HMS mesoporous catalysts for ultra‐deep oxidative desulfurization

Bimetallic Fe‐V‐HMS (HMS, hexagonal mesoporous silica) catalysts with various molar ratios of iron to vanadium were synthesized using a co‐synthesis method, and investigated for oxidative desulfurization of dibenzothiophene (DBT) using tert‐butyl hydroperoxide as an oxidant. The catalysts were characterized using X‐ray diffraction, temperature‐programmed desorption of ammonia, Fourier transform infrared spectroscopy and N₂ physical adsorption–desorption techniques. The Fe‐V‐HMS catalyst with a 2:1 molar ratio of iron to vanadium exhibited the highest total acidity and the highest catalytic activity. DBT was almost completely oxidized to dibenzothiophenesulfone, a species with a higher polarity that could be subsequently adsorbed on the Fe‐V‐HMS, and therefore the Fe‐V‐HMS acts as both a catalyst and an adsorbent simultaneously. The desulfurization rate was 98.1%. A pseudo‐first‐order model was fitted to the experimental data, and the activation energy was found to be 38.79 kJ mol^?1. The encouraging performance of Fe‐V‐HMS offers the prospect of the design of a one‐pot oxidative desulfurization process without needing extraction of sulfones from fuel oil with a chemical solvent.     

Immobilization of phosphotungstic acid in an amino‐containing metal–organic framework for oxidative desulfurization

A composite material has been successfully synthesized using an amino‐containing metal–organic framework (NH₂‐MOF) and phosphotungstic acid (PTA). This composite was characterized using X‐ray diffraction, high‐resolution transmission electron microscopy, nitrogen adsorption–desorption measurements, Fourier transform infrared spectroscopy and X‐ray fluorescence. Characterization results confirmed the immobilization and good distribution of PTA in the NH₂‐MOF. The PTA/NH₂‐MOF was subsequently applied in the oxidative desulfurization of dibenzothiophene (DBT) with H₂O₂ as the oxidant in n‐octane under atmospheric conditions. Under optimal reaction conditions, the oxidative desulfurization conversion of DBT reached 100%, and there was no significant decrease of the catalytic activity after four recycles. Kinetic experiments were also performed for the reaction at various temperatures, which indicated that oxidative reaction rates followed pseudo first‐order kinetics, and the apparent activation energy for the desulfurization reaction was 34.1 kJ mol^?1. The results indicated that this material exhibited excellent catalytic performance for oxidative desulfurization of DBT. Copyright © 2016 John Wiley & Sons, Ltd.     

Improving the Ring‐opening Polymerization of l‐Lactide Using n‐Butyl Lithium with Various Bidentate Ligands

A series of bidentate ligands were examined to improve the catalytic activity of l ‐lactide (LA) polymerization by using n‐butyl lithium and BnOH. For LA polymerization, n‐butyl lithium with tetraisopropyl methylenebis(phosphonate) (L⁸ ) showed the greatest catalytic activity but with poor controllability of the polymer molecular weight. The polydispersity indices (PDIs) could be improved without BnOH addition, but Mn _GPC was much different from the Mn _Cal . ¹H NMR spectra confirmed that the cyclized PLA was obtained, thus implying that active chain‐end mechanisms were operative in LA polymerization.