Synthesis,characterization and photocatalytic application of TiO2/magnetic graphene for efficient photodegradation of crystal violet

A magnetized nano‐photocatalyst based on TiO₂/magnetic graphene was developed for efficient photodegradation of crystal violet (CV). Scanning electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and elemental mapping were used to characterize the prepared magnetic nano‐photocatalyst. The photocatalytic activity of the synthesized magnetic nano‐photocatalyst was evaluated using the decomposition of CV as a model organic pollutant under UV light irradiation. The obtained results showed that TiO₂/magnetic graphene exhibited much higher photocatalytic performance than bare TiO₂. Incorporation of graphene enhanced the activity of the prepared magnetic nano‐photocatalyst. TiO₂/magnetic graphene can be easily separated from an aqueous solution by applying an external magnetic field. Effects of pH, magnetized nano‐photocatalyst dosage, UV light irradiation time, H₂O₂ amount and initial concentration of dye on the photodegradation efficiency were evaluated and optimized. Efficient photodegradation (>98%) of the selected dye under optimized conditions using the synthesized nano‐photocatalyst under UV light irradiation was achieved in 25 min. The prepared magnetic nano‐photocatalyst can be used in a wide pH range (4–10) for degradation of CV. The effects of scavengers, namely methanol (OH^? scavenger), p‐benzoquinone (O₂^?? scavenger) and disodium ethylenediaminetetraacetate (hole scavenger), on CV photodegradation were investigated.     

Novel type of SO3H–functionalized nano‐titanium dioxide as a highly efficient and recyclable heterogeneous nanocatalyst for the synthesis of tetrahydrobenzo[b]pyrans

n ‐Butylsulfonated nano‐titania (n‐TiO₂‐NH‐(CH₂)₄‐SO₃H) as a highly efficient and reusable nanocatalyst was prepared by grafting 2,4‐toluene diisocyanate as a bi‐functional covalent linker onto a nano‐titania support, followed by reduction and then ring opening‐reaction of the synthesized amine with 1,4‐butanesultone. Fourier transform infrared spectroscopy, X‐ray diffraction, field‐emission scanning electron microscopy and thermogravimetric analysis were used to characterize the catalyst. The catalytic activity of n‐TiO₂‐NH‐(CH₂)₄‐SO₃H was evaluated in the synthesis of tetrahydrobenzo[b ]pyrans, which affords high yields. Statistical experimental design was applied as an efficient and powerful method to achieve the optimal conditions for this catalytic reaction leading to high yield. Moreover, the catalyst was recovered and reused at least six times without a significant decrease in catalytic activity.     

Facile Synthesis of Three‐Dimensional Pt‐TiO2 Nano‐networks: A Highly Active Catalyst for the Hydrolytic Dehydrogenation of Ammonia–Borane

Three‐dimensional (3D) porous metal and metal oxide nanostructures have received considerable interest because organization of inorganic materials into 3D nanomaterials holds extraordinary properties such as low density, high porosity, and high surface area. Supramolecular self‐assembled peptide nanostructures were exploited as an organic template for catalytic 3D Pt‐TiO₂ nano‐network fabrication. A 3D peptide nanofiber aerogel was conformally coated with TiO₂ by atomic layer deposition (ALD) with angstrom‐level thickness precision. The 3D peptide‐TiO₂ nano‐network was further decorated with highly monodisperse Pt nanoparticles by using ozone‐assisted ALD. The 3D TiO₂ nano‐network decorated with Pt nanoparticles shows superior catalytic activity in hydrolysis of ammonia–borane, generating three equivalents of H₂.     

SO3H‐functionalized nano‐MGO‐D‐NH2: Synthesis,characterization and application for one‐pot synthesis of pyrano[2,3‐d]pyrimidinone and tetrahydrobenzo[b]pyran derivatives in aqueous media

An SO₃H‐functionalized nano‐MGO‐D‐NH₂ catalyst has been prepared by multi‐functionalization of a magnetic graphene oxide (GO) nanohybrid and evaluated in the synthesis of tetrahydrobenzo[b]pyran and pyrano[2,3‐d]pyrimidinone derivatives. The GO/Fe₃O₄ (MGO) hybrid was prepared via an improved Hummers method followed by the covalent attachment of 1,4‐butanesultone with the amino group of the as‐prepared polyamidoamine‐functionalized MGO (MGO‐D‐NH₂) to give double‐functionalized magnetic nanoparticles as the catalyst. The prepared nanoparticles were characterized to confirm their synthesis and to precisely determine their physicochemical properties. In summary, the prepared catalyst showed marked recyclability and catalytic performance in terms of reaction time and yield of products. The results of this study are hoped to aid the development of a new class of heterogeneous catalysts to show high performance and as excellent candidates for industrial applications.     

Green synthesis of TiO2 nanoparticles as an efficient heterogeneous catalyst with high reusability for synthesis of 1,2‐dihydroquinoline derivatives

Nano materials find wide applications due to their behavior at nano scale. TiO₂ nanoparticles (TiO₂ NPs) was synthesized using Neem leaf extract. This is simple, rapid, eco‐friendly, cheaper and green tools for TiO₂ NPs synthesis using agricultural waste at lower applied temperature. Characterization of the extracted TiO₂ NPs was confirmed by XRD, SEM, EDAX, TEM, HR‐TEM, SAED, and FT‐IR, respectively. The catalytic activity of TiO₂ NPs was investigated in synthesis of 1,2‐dihydroquinoline derivatives with excellent yields and low cost. Purification of the synthesized 1,2‐dihydroquinoline derivatives carried out by easy work‐up of non‐chromatographic methods.     

Corrosion behavior of electroless Ni–P/TiO2 nanocomposite coatings

Composite Ni–P/nano‐TiO₂ coatings were prepared by simultaneous electroless deposition of Ni–P and nano‐TiO₂ on a low carbon steel substrate. The deposition was carried out from stirred solutions containing suspended nano‐TiO₂ particles. The Ni–P and Ni–P/nano‐TiO₂ coatings before and after heat treatment were characterized by X‐ray diffraction, scanning electron microscopy and energy dispersive X‐ray spectroscopy. The micro‐structural morphologies of the coatings significantly varied with the nano‐TiO₂ content. The corrosion resistance of as‐plated and heat‐treated Ni–P and Ni–P/nano‐TiO₂ coatings was investigated by anodic polarization, Tafel plots and electrochemical impedance spectroscopic (EIS) studies in 3.5% NaCl solution. Ni–P/nano‐TiO₂ coating exhibited superior corrosion resistance over Ni–P coating. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrothermal synthesis and catalytic properties of superacid sulfated titania

The micromorphology and catalytic properties of nanocrystalline TiO₂/SO₄²⁻ superacid systems prepared by a conventional sol-gel process, as well as hydrothermal (HT) and microwave-hydrothermal (MW-HT) processes, were analyzed. The samples prepared by the HT process have no developed surfaces and, as a consequence, have no high reactivity in isobutylene oligomerization. The TiO₂/SO₄²⁻ samples prepared by single-step MW-HT synthesis in their morphologic, acid, and catalytic properties are competitive with the systems prepared by the conventional multistage sol-gel process.     

Dispersion of TiO2 on high‐surface‐area mesoporous silica: functionalization with tungstophosphoric acid and application in solvent‐free,aerobic oxidation of n‐hexadecane

Imidazole type ionic liquid, 1‐hexadecyl‐3‐methylimidazolium chloride, was used to template the synthesis of high‐surface‐area mesoporous silica under acidic conditions and crystalline titanium dioxide (TiO₂) nanoparticles of anatase phase were inserted utilizing a solvent evaporation‐induced method. The surface area of more than 700 m² g^?1 was obtained after TiO₂ impregnation. Further, the polyoxometalate, 12‐tungstophosphoric acid (PW₁₂) was dispersed on the surface of TiO₂ to form PW₁₂–TiO₂–silica hybrid catalytic materials. The catalytic activity of this hybrid material was tested for solvent‐free, aerobic oxidation of n‐hexadecane. The experimental investigation shows that PW₁₂–TiO₂ nanocrystals did not block the pore channels and gave good conversion. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,Characterization, and Photocatalytic Activity of N‐Doped TiO2 Nanotubes

N‐doped TiO₂ nanotubes with high photocatalytic activity were prepared by the combination of sol‐gel process with hydrothermal treatment. The prepared materials are characterized with transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), x‐ray diffraction (XRD), x‐ray photoelectron spectra (XPS), and UV‐vis spectra. Photocatalytic performance of the N‐doped TiO₂ nanotubes is studied by testing the degradation rate of methyl orange under UV irradiation. Obtained results indicate that N‐doped TiO₂ nanotubes have high catalytic activity for photocatalytic oxidation.     

Photocatalytic activity of N-doped TiO2: photocatalytic synthesis of o-aminophenol at room temperature

The photocatalytic synthesis of o-aminophenol in methanol was investigated with N-doped TiO₂ nanoparticles under UV-light irradiation. The catalytic quantities of N-doped TiO₂ prepared by a simple modified sol–gel process with urea as nitrogen source rapidly reduced o-nitrophenol to the corresponding amine at room temperature.     

Preparation of Ni/TiO2 Nanoparticles and Their Catalytic Performance on the Thermal Decomposition of Ammonium Perchlorate

Metal/oxide nanoparticles are attractive because of their special structure and better properties. The Ni/TiO₂ nanoparticles were prepared by a liquid phase chemical reduction method in this paper. The obtained‐products were characterized by inductively coupled plasma (ICP), X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM). The results show that Ni particles in Ni/TiO₂ nanoparticles exhibit better dispersion and the size of most Ni particles is 10 nm or so. The catalytic activity of Ni/TiO₂ nanoparticles on the thermal decomposition of ammonium perchlorate (AP) was investigated by simultaneous thermogravimetry and differential thermal analysis (TG‐DTA). Results show that composite process of Ni and TiO₂ can improve the catalytic activity of Ni nanoparticles on the thermal decomposition of AP, which is mainly attributed to the improvement of Ni dispersion in Ni/TiO₂ nanoparticles. The catalytic activity of Ni/TiO₂ nanoparticles increases with increasing the weight ratio of Ni to AP.     

Controllable Synthesis of Inverse Opal TiO2‐x Photonic Crystals and Their Photoelectric Properties

In this study, inverse opal TiO_2‐x photonic crystals (IO‐TiO_2‐x) have been successfully synthesized by a two‐step calcination. The whole synthesis is safe and feasible. Additionly, the reduction degree and the structure of IO‐TiO_2‐x can be precisely controlled. A series of IO‐TiO_2‐x samples with different reduction degree were prepared and characterized. The TEM images show that the obtained samples possess a 3D‐ordered macroporous inverse opal structure. The reduced Ti atoms/oxygen vacancies were confirmed by Raman and XPS spectroscopy. All IO‐TiO_2‐x samples showed better photoelectric properties than those of common TiO₂ which indicates their great potential to be applied to photoelectric fields. The improvement of photoelectric properties is attributed to the efficient electron‐hole separation efficiency induced by moderately reduced Ti atoms/oxygen vacancies. Meanwhile, the 3D‐ordered macroporous inverse opal structure and the band gap are regulated to “capture” more solar energy. This new approach is proven to be a meaningful method to synthesize high‐performance TiO₂ materials.     

Synthesis of Nano‐Sized TiO2 Colloidal Sol and Its Optical Properties

Nano‐sized TiO₂ sol was prepared through a wet synthesis process. The synthesis procedure involved hydrolysis of TiCl₄, acid treatment, and a SiO₂ surface‐modifying process. Before surface modification, the TiO₂ suspension was treated with acid to remove Na ions, soluble TiO_2, and other impurities. The acid treatment of a TiO₂ suspension at a higher temperature was proved to be useful for effective SiO₂ modification. The colloidal sol provided high transparency in visible light as well as excellent UV‐shielding properties. Surface modification of TiO₂ particles with SiO₂ greatly improved both the dispersing stability in neutral pH and the photostability of TiO₂ colloidal sol.     

An Efficient One‐pot Three‐component Method for the Synthesis of 5‐Amino‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐7‐aryl‐7H‐thiazolo[3,2‐a]pyridine‐6,8‐dicarbonitriles

A facile, convenient, and adequate method has been developed for the synthesis of novel 5‐amino‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐7‐aryl‐7H‐thiazolo[3,2‐a]pyridine‐6,8‐dicarbonitriles ( 6 ) by employing 2‐(4‐(2‐oxo‐2H‐chromen‐3‐yl)thiazol‐2‐yl)acetonitrile ( 3 ) as an important precursor. Initially, we have synthesized the target compounds in a stepwise manner and then approached a tandem method to examine the feasibility of one‐pot method. Subsequently, one‐pot three‐component protocol has been established for the synthesis of title compounds by the reaction of 3 with benzaldehyde and malononitrile in refluxing ethanol engender a new six‐membered thiazolo[3,2‐a] pyridine as a hybrid scaffold. Reaction conditions were optimized for this reaction and a broad substrate scope with various aryl and heteroaryl aldehydes make this protocol very practical, attractive, and worthy. Mechanistic aspects for the formation of these compounds were outlined comprehensively. Characterization of these newly synthesized compounds was achieved by means of IR, ¹H NMR, ¹³C NMR, and HRMS.     

Preparation and characterization of natural zeolite supported nano TiO2 photocatalysts by a modified electrostatic self‐assembly method

Natural zeolite supported nano TiO₂ photocatalysts were prepared by a modified electrostatic self‐assembly (ESA) method. First, γ‐mercaptopropyltrimethoxysilane with sulfhydryl (―SH) functional groups was modified on the zeolite powders by using a ‘dry process’. Second, silane with ―SH functional groups was oxidized to sulfonate (―SO₃H) groups by using a hydrogen peroxide/glacial acetic acid mixed solution, and the surface of ―SO₃H silane–zeolite was electronegative charged due to the ionization of ―SO₃H. Third, the hydrolytic titanium polycation from TiCl₄ solution assembled onto the electronegative charged zeolite under electrostatic attraction in the reaction solutions. Finally, zeolite supported nano TiO₂ photocatalysts can be obtained after the above compounds calcined at certain temperature. The samples were characterized by X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface areas, Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS) and X‐ray fluorescence (XRF). The photocatalytic activities of the samples were evaluated by the degradation of methyl orange in aqueous solution. The results showed that ESA method effectively improved the composite efficiency of zeolite with TiO₂. The photocatalysts prepared by ESA method exhibited higher photocatalytic and recycling activities than that of traditional method. Copyright © 2014 John Wiley & Sons, Ltd.     

掺杂纳米金粒子的火焰氧化TiO2膜的光电化学性质的研究

A nano-Au modified TiO2 electrode was prepared via the oxidation of Ti sheet in flame and subsequent modification with gold nanoparticles. The results of SEM and TEM measurements show that the Au nanoparticles are well dispersed on TiO2 surface. A near 2-fold enhancement in photocurrent was achieved upon the modification with Au nanoparticles. From the results of photocurrent and electrochemical impedance experiments it was found that the flatband potential of nano-Au/TiO2 electrode negatively shifted about 100 mV in 0.5 mol/L Na2SO4 solutions compared with that of bare TiO2 electrode. The improvement of photoelectrochemical performance was explained by the inhibition for charge recombination of photo-induced electrons and holes, and the promotion for interracial charge-transfer kinetics at nano-Au/TiO2 composite film. Such nanometal-semiconductor composite films have the potential application in improving the performance of photoelectrochemical solar cells.     

Effects of titanium silicalite and TiO2 nanocomposites on supported Co‐based catalysts for Fischer–Tropsch synthesis

Titanium silicalite (TS) and TiO₂ nanocomposites were prepared by mixing TS and TiO₂ with different ratios in ethanol. They were impregnated with 15 wt% Co loading to afford Co‐based catalysts. Fischer–Tropsch synthesis (FTS) performance of these TS–TiO₂ nanocomposite‐supported Co‐based catalysts was studied in a fixed‐bed tubular reactor. The results reveal that the Co/TS–TiO₂ catalysts have better catalytic performance than Co/TS or Co/TiO₂ each with a single support, showing the synergistic effect of the binary TS–TiO₂ support. Among the TS–TiO₂ nanocomposite‐supported Co‐based catalysts, Co/TS–TiO₂‐1 presents the highest activity. These catalysts were characterized using N₂ adsorption–desorption measurements, X‐ray diffraction, X‐ray photoelectron spectroscopy, H₂ temperature‐programmed reduction, H₂ temperature‐programmed desorption and transmission electron microscopy. It was found that the position of the active component has a significant effect on the catalytic activity. In the TS–TiO₂ nanocomposites, cobalt oxides located at the new pores developed between TS and TiO₂ can exhibit better catalytic activity. Also, a positive relationship is observed between Co dispersion and FTS catalytic performance for all catalysts. The catalytic activity is improved on increasing the dispersion of Co.     

Enhanced Self‐Cleaning Properties on Polyester Fabric Under Visible Light Through Single‐Step Synthesis of Cuprous Oxide Doped Nano‐TiO2

Nowadays, introducing self‐cleaning properties on various fabrics under daylight irradiation for automotive and upholstery application is in a central point of research. This can be achieved by application of metal‐doped TiO₂ nano particles on the textile fabrics. Here, alkali hydrolysis of polyester fabric has been carried out along with synthesis of Cu₂O/TiO₂ nanoparticles in a single‐step process by using sonochemical technique. CuSO₄.5H₂O was used as a source of copper in the presence of glucose as reducing and stabilizing agent. Moreover, central composite design based on response surface methodology (RSM) was used to determine the role of variables (CuSO₄.5H₂O, glucose and pH) and their effects on the self‐cleaning properties and weight of the fabric. The self‐cleaning property was investigated by degradation of Methylene blue on the surface of the treated fabrics under daylight. Further, the tensile properties, colorimetric measurement, and washing fastness of the treated fabric produced in the optimum conditions were investigated. The morphology of Cu₂O/TiO₂ nanoparticles was examined using X‐ray diffraction and field emission scanning electron microscopy (FESEM). The new polyester fabric obtained through in situ synthesis of Cu₂O/TiO₂ nanoparticles can be used as a desirable stable fabric with high tensile strength and visible‐light self‐cleaning properties.     

Synthesis of Mesoporous TiO2/SiO2 Hybrid Films as an Efficient Photocatalyst by Polymeric Micelle Assembly

Thermally stable mesoporous TiO₂/SiO₂ hybrid films with pore size of 50 nm have been synthesized by adopting the polymeric micelle‐assembly method. A triblock copolymer, poly(styrene‐b‐2‐vinyl pyridine‐b‐ethylene oxide), which serves as a template for the mesopores, was utilized to form polymeric micelles. The effective interaction of titanium tetraisopropoxide (TTIP) and tetraethyl orthosilicate (TEOS) with the polymeric micelles enabled us to fabricate stable mesoporous films. By changing the molar ratio of TEOS and TTIP, several mesoporous TiO₂/SiO₂ hybrid films with different compositions can be synthesized. The presence of amorphous SiO₂ phase effectively retards the growth of anatase TiO₂ crystal in the pore walls and retains the original mesoporous structure, even at higher temperature (650 °C). These TiO₂/SiO₂ hybrid films are of very high quality, without any cracks or voids. The addition of SiO₂ phase to mesoporous TiO₂ films not only adsorbs more organic dyes, but also significantly enhances the photocatalytic activity compared to mesoporous pure TiO₂ film without SiO₂ phase.     

TiO2 supported cobalt-manganese nano catalysts for light olefins production from syngas

Cobalt-manganese nano catalysts were prepared by sol-gel method. This research investigated the effects of different cobalt-manganese (Co/Mn = 1/1) loading, pH and calcination conditions on the catalytic performance of Co-Mn/TiO₂ catalysts for Fischer-Tropsch synthesis (FTS) in a fixed bed reactor. It was found that the catalyst containing 30wt%(Co-Mn)/TiO₂ was an optimal catalyst for the conversion of synthesis gas to light olefins especially propylene. The activity and selectivity of optimal catalyst were studied under different operational conditions. The results showed that the best operational conditions were H₂/CO= 1/1 molar feed ratio at 250 °C and GHSV= 1300 h^?1 under atmospheric pressure. Characterization of catalysts was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption measurements.