Polyisobutylene‐based polyurethanes. VIII. Polyurethanes with ‐O‐S‐PIB‐S‐O‐ soft segments

We describe the synthesis, characterization, and select properties of a novel polyurethane (PU) prepared using a new polyisobutylene diol, HO‐CH₂CH₂‐S‐PIB‐S‐CH₂CH₂‐OH, soft segment and conventional hard segments. The diol is synthesized by terminal functionalization of ally‐telechelic PIB followed by low‐cost thiol‐ene click chemistry. Properties of ‐S‐ containing PU (PIB_S‐PU) containing 72.5% PIB were investigated and compared to similar PUs made with HO‐PIB‐OH (PIB_O‐PU). Hydrolytic resistance was studied by contact with phosphate‐buffered saline, oxidative resistance by immersing in concentrated HNO₃, and metal ion oxidation resistance by exposure to CoCl₂/H₂O₂. Hydrolytic and oxidative resistances of PIB_S‐PU and PIB_O‐PU are similar and superior to a commercial PDMS‐based PU, Elast‐Eon? E2A. According to ¹H NMR spectroscopy the ‐S‐ in PIB_S‐PUs remained unchanged upon treatment with HNO₃, however, oxidized mainly to ‐SO₂‐ by CoCl₂/H₂O_2. Static mechanical properties of PIB_S‐PU and PIB_O‐PU are similar, except creep resistance of PIB_S‐PU is surprisingly superior. The thermal stability of PIB_S‐PUs is ～15 °C higher than that of PIB_O‐PU. FTIR spectroscopy indicates H bonded S atoms (N‐H…S) between soft and hard segments, which noticeably affect properties. DSC and XRD studies suggest random low‐periodicity crystals dispersed within a soft matrix. Energy dispersive X‐ray spectroscopy–scanning electron microscopy indicates homogeneous distribution of S atoms on PIB_S‐PU surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1119–1131     

Polyisobutylene‐based polyurethanes X: PU nanocomposites with s‐containing soft segments

Sulfur‐containing polyisobutylene (PIB)‐based polyurethane nanocomposite (PIB_s‐PU/NC) was synthesized using HO? CH₂CH₂? S? PIB? S? CH₂CH₂? OH for the soft segment, conventional hard segments of MDI and BDO, and organically modified montmorillonite (OmMMT) nanolayers. The properties of PIB_s‐PU/NC containing 72.5% PIB and 0.5% OmMMT were studied and contrasted with unmodified PIB_s‐PU. PIB_s‐PU/NC produces colorless optically clear films exhibiting enhanced tensile strength, elongation, oxidative–hydrolytic stability, and creep resistance relative to that of PIB_s‐PU. FTIR spectroscopy indicates H bonded S atoms between soft and hard segments, and OmMMT nanolayers. DSC and XRD suggest randomly dispersed low‐periodicity crystals and urea groups between galleries. We propose that minute amounts of OmMMT nanolayers become covalently attached to polyurethane chains and beneficially affect properties by acting as co‐chain extender/reinforcing filler. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2760–2765     

Direct functionalization of polyisobutylene by living initiation with α‐methylstyrene epoxide

This article describes the synthesis and characterization of polyisobutylene (PIB) carrying one primary hydroxyl head group and a tertiary chloride end group, [Ph? C(CH₃)(CH₂OH)–PIB–CH₂? C(CH₃)₂Cl] prepared with direct functionalization via initiation. The polymerization of isobutylene was initiated with the α‐methylstyrene epoxide/titanium tetrachloride system. Living conditions were obtained from ?75 to ?50 °C (198–223 K). Low molecular weight samples (number‐average molecular weight ～ 4000 g/mol) were prepared under suitable conditions and characterized by Fourier transform infrared and ¹H NMR spectroscopy. The presence of primary hydroxyl head groups in PIB was verified by both methods. Quantitative Fourier transform infrared with 2‐phenyl‐1‐propanol calibration and ¹H NMR performed on both the hydroxyl‐functionalized PIB and its reaction product with trimethylchlorosilane showed that each polymer chain carried one primary hydroxyl head group. The synthetic methodology presented here is an effective and simple route for the direct functionalization of PIB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1005–1015, 2002     

Polyisobutylene‐based polyurethanes: VII. structure/property investigations for medical applications

The outstanding hydrolytic and oxidative stabilities of polyisobutylene‐based polyurethanes (PIB‐based PUs) were reported earlier. Herein, we summarize recent investigations aimed at further enhancing hydrolytic‐oxidative stabilities (in terms of resistance to aqueous buffer, nitric acid and CoCl₂/H₂O₂) together with excellent mechanical properties. The purity and dryness of ingredients together with precise NCO/OH stoichiometry (～1.05) are essential to obtain PIB‐based PUs with improved properties. Static and dynamic mechanical properties were optimized by analyzing stress–strain traces, thermal (TGA, DSC) responses, self‐organization (XRD) profiles, and rheological (DMA, creep) information. According to microstructure and surface analyses (AFM, contact angle) annealing increases the segregation of individual segments and increases surface hydrophobicity, which in turn enhances the shielding of hydrolytically oxidatively vulnerable carbamate bonds by inert PIB barriers, and thus significantly improves hydrolytic‐oxidative stability. Annealing does not much affect bulk properties, such as static and dynamic mechanical and thermal properties; however, it increases damping over a wide temperature range. Annealed PIB‐based PU containing 72.5% PIB exhibits outstanding hydrolytic‐oxidative stability together with ～26 MPa tensile strength, ～500% elongation, and ～77 Microshore hardness. PIB‐based PUs are significantly more resistant to hydrolytic and oxidative degradation than ElastEon? E2A, a commercially available PDMS‐based PU, widely used for medical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 532–543     

Novel polyisobutylene/poly(dimethylsiloxane) bicomponent networks. I. Synthesis and characterization

The synthesis of novel polyisobutylene (PIB)/poly(dimethylsiloxane) (PDMS) bicomponent networks is described. The synthesis strategy (see Figure 1) was to prepare well-defined and -characterized allyl-tritelechelic polyisobutylenes [ϕ(PIB—C—C=C)₃] and SiH-ditelechelic poly(dimethylsiloxanes) (HSi–PDMS–SiH) and then crosslink these moieties by hydrosilation. The ϕ(PIB—C—C=C)₃ was prepared by living isobutylene polymerization followed by end-quenching with allyltrimethylsilane, whereas the HSi–PDMS–SiH was obtained by equilibrium polymerization of octamethylcyclotetrasiloxane and tetramethyldisiloxane. The detailed structures of the starting polymers were characterized by GPC and ¹H-NMR spectroscopy. A series of PIB/PDMS bicomponent networks of varying compositions and average molecular weights between crosslinks (M _c) of ∼ 20,000 g/mol were assembled. Optimum crosslinking conditions were defined in terms of H₂PtCl₆ catalyst concentration, nature of solvent, time, temperature, and stoichiometry of ∼ CH₂CH=CH₂/∼SiH groups, allowing for the convenient synthesis of well-defined model bicomponent networks. Swelling studies and elemental analysis confirm the correctness of the synthetic strategy. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1891–1899, 1998     

Low‐cost bifunctional initiators for bidirectional living cationic polymerization of olefins. III. centrally functionalized polyisobutylenes

Allyl‐telechelic polyisobutylene (A‐PIB‐A) produced by the bis‐benzocyclobutane dichloride (bBCB‐diCl) initiator contains the bis‐benzocyclobutane (bBCB) fragment at the center of the macromolecule (A‐PIB‐bBCB‐PIB‐A). Thermolysis of A‐PIB‐bBCB‐PIB‐A quantitatively converts the central bBCB fragment to a substituted conjugated tetraene (A‐PIB‐tetraene‐PIB‐A). The structure of A‐PIB‐tetraene‐PIB‐A was anticipated from small molecule models and identified/quantitated by ¹H NMR spectroscopy. This is the first time a reactive functional group was introduced at the statistical center of a (telechelic) PIB. Subsequently, the A‐PIB‐tetraene‐PIB‐A was peroxidized to an epoxy derivative. Reaction of the A‐PIB‐tetraene‐PIB‐A with HSCH₂CH₂OH produced HOCH₂‐telechelic PIB containing a central  CH₂OH function, and hydrosilation with HSi(Me₂)‐O‐Si(Me₂)H produced SiH‐telechelic PIB with a central  SiH function. Reactions with maleic anhydride, tetracyanoethylene, butyl lithium, and potassium permanganate have also been examined. In sum, A‐PIB‐bBCB‐PIB‐A and A‐PIB‐tetraene‐PIB‐A are useful intermediates for the synthesis of novel PIB‐based materials for various end uses under investigation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1140–1145     

Minor amounts of glycerol improve the properties of polyisobutylene‐based polyurethane and its nanocomposites

The synthesis of primary hydroxyl‐telechelic polyisobutylene, HOCH₂‐PIB‐CH₂OH, often yields product the number average terminal functionality ( $f_{n,{\mathrm{CH}}_2\mathrm{OH}}$) of which is less than theoretical 2.0, typically $f_{n,{\mathrm{CH}}_2\mathrm{OH}}$ = 1.75–1.95. Polyurethane (PU) prepared with such low‐cost imperfect PIB‐diols, unsurprisingly, exhibit poor overall properties. Herein we report that mechanical, rheological, and thermal properties of polyisobutylene‐based polyurethane (PIB‐PU) and PIB‐PU reinforced with organically modified montmorillonite (OmMMT) prepared with PIB‐diol of $f_{n,{\mathrm{CH}}_2\mathrm{OH}}$ = 1.85 are significantly enhanced by glycerol. Specifically, we document that calculated minor amounts of glycerol substantially improves tensile strength, ultimate elongation, elastic modulus, toughness, rubbery plateau, flow temperature, creep, permanent set, rate of recovery after loading, and thermal properties of PIB‐PU and OmMMT‐reinforced PIB‐PU prepared with PIB‐diol of $f_{n,{\mathrm{CH}}_2\mathrm{OH}}$ = 1.85. The observations are summarized and discussed in terms of chemistry, micromorphology, and viscoelasticity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 929–935     

Synthesis and characterization of two novel star blocks: tCum[poly(isobutylene‐b‐norbornadiene)]3 and tCum[poly(norbornadiene‐b‐isobutylene)]3

Two structurally closely related three‐arm star blocks were synthesized and characterized: tCum(PIB‐b‐PNBD)₃ and tCum(PNBD‐b‐PIB)₃ [where tCum (tricumyl) stands for the phenyl‐1,3,5‐tris(‐2‐propyl) fragment and PIB and PNBD are polyisobutylene and polynorbornadiene, respectively]. The syntheses were accomplished in two stages: (1) the preparation of the first (or inner) block fitted with appropriate chlorine termini capable of initiating the polymerization of the second (or outer) block with TiCl₄ and (2) the mediation of the polymerization of the second block. Therefore, the synthesis of tCum(PIB‐b‐PNBD)₃ was effected with tCum(PIB‐Cl^t)₃ [where Cl^t is tert‐chlorine and number‐average molecular weight (M_n) = 102,000 g/mol] by the use of TiCl₄ and 30/70 CH₃Cl/CHCl₃ solvent mixtures at ?35 °C. PNBD homopolymer contamination formed by chain transfer was removed by selective precipitation. According to gel permeation chromatography, the M_n's of the star blocks were 107,300–109,200 g/mol. NMR spectroscopy (750 MHz) was used to determine structures and molecular weights. Differential scanning calorimetry (DSC) indicated two glass‐transition temperatures (T_g's), one each for the PIB (?65 °C) and PNBD (232 °C) phases. Thermogravimetric analysis thermograms showed 5% weight losses at 293 °C in air and at 352 °C in N₂. The synthesis of tCum(PNBD‐b‐PIB)₃ was achieved by the initiation of isobutylene polymerization with tCum(PNBD‐Cl^sec)₃ (where Cl^sec is sec‐chlorine and M_n = 2900 g/mol) by the use of TiCl₄ in CH₃Cl at ?60 °C. DSC for this star block (M_n = 14,200 g/mol) also showed two T_g's, that is, at ?67 and 228 °C for the PIB and PNBD segments, respectively. It is of interest that the Cl^sec terminus of PNBD, , readily initiated isobutylene polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 740–751, 2003     

Minute amounts of organically modified montmorillonite improve the properties of polyisobutylene‐based polyurethanes

We discovered that polyisobutylene (PIB)‐based polyurethanes (PIB‐PUs) containing minute amounts (0.5%) of chemically bound organically modified montmorillonite (OmMMT) surprisingly produce films exhibiting improved properties. The OmMMT was prepared by reacting sodium montmorillonite (Na⁺MMT^?) with quaternary ammonium salts of a tertiary amine carrying a ? NH₂ functionality. The positively charged quaternary amine group becomes electrostatically attached to negatively charged MMT layers and defoliates it, whereas the free ? NH₂ group reacts with diisocyanates and acts as an additional chain extender. Thus, when OmMMT is added to a mixture of ingredients assembled for the synthesis of PIB‐PUs, this modified clay becomes an integral part of the PU. Specifically, we found that the integration of 0.5% OmMMT to PIB‐based PUs produces films with significantly enhanced tensile strength, elongation, toughness, creep, and stress relaxation relative to that of PIB‐PUs. The findings were discussed and explained in terms of a proposed morphology for the nanocomposite. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4076–4087     

Polyisobutylene‐based polyurethanes. IX. synthesis,characterization, and properties of polyisobutylene‐based poly(urethane‐ureas)

Polyisobutylene (PIB)‐based polyurethanes (PUs) exhibit unparalleled hydrolytic‐oxidative‐biologic stability and are melt processible, however, their mechanical (strength) properties are modest mainly due to insufficient H bonds. We posited and demonstrate that the ultimate properties of PIB‐PUs are enhanced, while their melt processibility is maintained, by the judicious introduction of urea linkages, i.e., strong bifurcated H bonds, in the chain. The incorporation of bifurcated H bonds in PIB‐PUs was achieved by using the conventional butane diol chain extender (CE) in combination with controlled amounts of amino alcohol as co‐chain extender (co‐CE). Polyurethanes containing both urethane and urea linkages are polyurethane‐ureas (PUU). Specifically, PIB‐PUUs prepared with PIB‐diol/MDI together with 80/20 mole % butane diol/amino butanol exhibited ～30 MPa tensile strength, ～550% elongation, ～80 Shore A hardness, and ～137 °C flow temperature. Other amino alcohols, i.e., amino ethanol, ‐propanol, and ‐hexanol, were less effective co‐CEs. ¹H‐NMR and FT‐IR spectroscopies indicate the presence of bifurcated H bonds in PIB‐PUUs prepared with CE/co‐CE combinations. Characterization by differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical thermal analysis, and creep experiments also suggest bifurcated H bonds in PIB‐PUU. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2361–2369     

Green Polymer Chemistry: II. Enzymatic Synthesis of Methacrylate‐Terminated Polyisobutylenes

Methacrylate‐terminated polyisobutylenes (PIB‐MAs) were synthesized by transesterification of vinyl methacrylate by hydroxyl‐terminated polyisobutylenes (PIB‐OH) using Candida antarctica lipase B (Novozyme 435) catalyst in hexane at 50 °C. PIB CH₂ CH₂ CH₂ OH and Glissopal OH, synthesized by anti‐Markovnikov hydrobromination of allyl‐terminated PIB and Glissopal®2300 followed by hydrolysis, were quantitatively converted into the corresponding PIB‐MAs. ¹H and ¹³C NMR spectroscopy verified the formation of the expected structures. This “green” chemistry is a very promising methodology for polymer functionalization in general, and biomaterial synthesis in particular.

     

Poly(styrene‐b‐isobutylene) multiarm star‐block copolymers

Multiarm star‐branched polymers based on poly(styrene‐b‐isobutylene) (PS‐PIB) block copolymer arms were synthesized under controlled/living cationic polymerization conditions using the 2‐chloro‐2‐propylbenzene (CCl)/TiCl₄/pyridine (Py) initiating system and divinylbenzene (DVB) as gel‐core‐forming comonomer. To optimize the timing of isobutylene (IB) addition to living PS⊕, the kinetics of styrene (St) polymerization at −80°C were measured in both 60 : 40 (v : v) methyl cyclohexane (MCHx) : MeCl and 60 : 40 hexane : MeCl cosolvents. For either cosolvent system, it was found that the polymerizations followed first‐order kinetics with respect to the monomer and the number of actively growing chains remained invariant. The rate of polymerization was slower in MCHx : MeCl (k_app = 2.5 × 10⁻³ s⁻¹) compared with hexane : MeCl (k_app = 5.6 × 10⁻³ s⁻¹) ([CCl]_o = [TiCl₄]/15 = 3.64 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M). Intermolecular alkylation reactions were observed at [St]_o = 0.93M but could be suppressed by avoiding very high St conversion and by setting [St]_o ≤ 0.35M. For St polymerization, k_app = 1.1 × 10⁻³ s⁻¹ ([CCl]_o = [TiCl₄]/15 = 1.82 × 10⁻³M; [Py] = 4 × 10⁻³M; [St]_o = 0.35M); this was significantly higher than that observed for IB polymerization (k_app = 3.0 × 10⁻⁴ s⁻¹; [CCl]_o = [Py] = [TiCl₄]/15 = 1.86 × 10⁻³M; [IB]_o = 1.0M). Blocking efficiencies were higher in hexane : MeCl compared with MCHx : MeCl cosolvent system. Star formation was faster with PS‐PIB arms compared with PIB homopolymer arms under similar conditions. Using [DVB] = 5.6 × 10⁻²M = 10 times chain end concentration, 92% of PS‐PIB arms (M_n,PS = 2600 and M_n,PIB = 13,400 g/mol) were linked within 1 h at −80°C with negligible star–star coupling. It was difficult to achieve complete linking of all the arms prior to the onset of star–star coupling. Apparently, the presence of the St block allows the PS‐PIB block copolymer arms to be incorporated into growing star polymers by an additional mechanism, namely, electrophilic aromatic substitution (EAS), which leads to increased rates of star formation and greater tendency toward star–star coupling. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1629–1641, 1999     

Construction of PIB‐b‐PDEAEMA well‐defined amphiphilic diblock copolymers via sequential living carbocationic and RAFT polymerization

A series of well‐defined amphiphilic diblock copolymers consisting of hydrophobic polyisobutylene (PIB) and hydrophilic poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) segments was synthesized via the combination of living carbocationic polymerization and reversible addition fragmentation chain transfer (RAFT) polymerization. Living carbocationic polymerization of isobutylene followed by end‐capping with 1,3‐butadiene was first performed at ?70 °C to give a well‐defined allyl‐Cl‐terminated PIB with a low polydispersity (M_w/M_n =1.29). This end‐functionalized PIB was further converted to a macromolecular chain transfer agent for mediating RAFT block copolymerization of 2‐(diethylamino)ethyl methacrylate at 60 °C in tetrahydrofuran to afford the target well‐defined PIB‐b‐PDEAEMA diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.22). The self‐assembly behavior of these amphiphilic diblock copolymers in aqueous media was investigated by fluorescence spectroscopy and transmission electron microscope, and furthermore, their pH‐responsive behavior was studied by UV‐vis and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1478–1486     

Synthesis of polyisobutylene with arylamino terminal group by combination of cationic polymerization with alkylation

The controlled cationic polymerization of isobutylene (IB) initiated by H₂O as initiator and TiCl₄ as coinitiator was carried out in n‐Hexane/CH₂Cl₂ (60/40, v/v) mixture at −40 °C in the presence of N,N‐dimethylacetamide (DMA). Polyisobutylene (PIB) with nearly theoretical molecular weight (M_n = 1.0 × 10⁴ g/mol), polydispersity (M_w/M_n) of 1.5 and high content (87.3%) of reactive end groups (tert‐Chlorine and α‐double bond) was obtained. The Friedel‐Crafts alkylation of triphenylamine (TPA) with the above reactive PIB was further conducted at different reactions, such as [TPA]/[PIB], solvent polarity, alkylation temperature, and time. The resultant PIBs with arylamino terminal group were characterized by ¹H NMR, UV, and GPC with RI/UV dual detectors. The experimental results indicate that alkylation efficiency (A_eff) increased with increases in [TPA]/[PIB], reaction temperature, and reaction time and with a decrease in solvent polarity. The alkylation efficiency could reach 81.0% at 60/40(v/v) mixture of n‐Hex/CH₂Cl₂ with [TPA]/[PIB] of 4.49 at 50 °C for 54 h. Interestingly, the synthesis of PIB with arylamino terminal group could also be achieved in one pot by combination of the cationic polymerization of IB initiated by H₂O/TiCl₄/DMA system with the successive alkylation by further introduction of TPA. Mono‐, di‐ or tri‐alkylation occurred experimentally with different molar ratio of [TPA]/[PIB]. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 936–946, 2008     

Novel substituted epoxide initiators for the carbocationic polymerization of isobutylene

This article presents the first detailed account of the discovery that substituted epoxides can initiate the carbocationic polymerization of isobutylene. α‐Methylstyrene epoxide (MSE), 2,4,4‐trimethyl‐pentyl‐epoxide‐1,2 (TMPO‐1), 2,4,4‐trimethyl‐pentyl‐epoxide‐2,3 (TMPO‐2), and hexaepoxi squalene (HES) initiated isobutylene polymerization in conjunction with TiCl₄. MSE, TMPO‐2, and HES initiated living polymerizations. A competitive reaction mechanism is proposed for the initiation and propagation. According to the proposed mechanism, initiator efficiency is defined by the competition between the S_N1 and S_N2 reaction paths. A controlled initiation with external epoxides such as MSE should yield a primary hydroxyl head group and a tert‐chloride end‐group. The presence of tert‐chloride end‐groups was verified by NMR spectroscopy, whereas the presence of primary hydroxyl groups was implied by model experiments. Multiple initiation by HES was verified by diphenyl ethylene end‐capping and NMR analysis; the resulting star polymer had an average of 5.2 arms per molecule. A detailed investigation of the reaction mechanism and the characterization of the polymers are in progress. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 444–452, 2000     

Low cost bifunctional initiators for bidirectional living cationic polymerization of olefins. I. isobutylene

We describe the discovery of novel low cost bifunctional initiators 2,4,7,9‐tetramethyl‐tricyclo[6.2.0.0³⁶]deca‐1(8),2,6‐triene‐4,9‐diol (bBCB‐diOH) and 4,9‐dichloro,2,4,7,9‐tetramethyl‐tricyclo[6.2.0.0³⁶]deca‐1(8),2,6‐triene (bBCB‐diCl), for living cationic bidirectional polymerization of olefins, for example, isobutylene. bBCB‐diOH was quantitatively synthesized in one step by UV radiation of commercially available diacetyl durene (DAD) and bBCB‐diCl by hydrochlorination of bBCB‐diOH. These molecules, in conjunction with TiCl₄ coinitiator, initiate the living polymerization of isobutylene. Livingness was demonstrated by linear conversion versus molecular weight (MW) plots and narrow MW distributions. Polymerizations are slower than those initiated by the universally used “hindered” bifunctional initiator 5‐tert‐butyl‐1,3‐bis(1‐chloro‐1‐methyl)benzene and are suitable for rate studies. Herein, we report the synthesis, by the use of bBCB‐diCl, of relatively low MW (M _n < 3000 g mol^?1) allyl‐telechelic polyisobutylene (PIB) used for the synthesis of PIB‐based polyurethanes and that of relatively high MW (M _n > 30,000) living PIB telechelics for the synthesis of thermoplastic elastomers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3716–3724     

Poly(acrylate‐b‐styrene‐b‐isobutylene‐b‐styrene‐b‐acrylate) Block Copolymers via Carbocationic and Atom Transfer Radical Polymerizations

A series of polyacrylate‐polystyrene‐polyisobutylene‐polystyrene‐polyacrylate (X‐PS‐PIB‐PS‐X) pentablock terpolymers (X=poly(methyl acrylate) (PMA), poly(butyl acrylate) (PBA), or poly(methyl methacrylate) (PMMA)) was prepared from poly (styrene‐b‐isobutylene‐b‐styrene) (PS‐PIB‐PS) block copolymers (BCPs) using either a Cu(I)Cl/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) or Cu(I)Cl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) catalyst system. The PS‐PIB‐PS BCPs were prepared by quasiliving carbocationic polymerization of isobutylene using a difunctional initiator, followed by the sequential addition of styrene, and were used as macroinitiators for the atom transfer radical polymerization (ATRP) of methyl acrylate (MA), n‐butyl acrylate (BA), or methyl methacrylate (MMA). The ATRP of MA and BA proceeded in a controlled fashion using either a Cu(I)Cl/PMDETA or Cu(I)Cl/Me₆TREN catalyst system, as evidenced by a linear increase in molecular weight with conversion and low PDIs. The polymerization of MMA was less controlled. ¹H‐NMR spectroscopy was used to elucidate pentablock copolymer structure and composition. The thermal stabilities of the pentablock copolymers were slightly less than the PS‐PIB‐PS macroinitiators due to the presence of polyacrylate or polymethacrylate outer block segments. DSC analysis of the pentablock copolymers showed a plurality of glass transition temperatures, indicating a phase separated material.     

Novel block ionomers II. Synthesis and characterization of polyisobutylene‐based block cationomers

Various novel block cationomers consisting of polyisobutylene (PIB) and poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) segments were synthesized and characterized. The specific targets were various molecular weight diblocks (PIB‐b‐PDMAEMA⁺) and triblocks (PDMAEMA⁺‐b‐PIB‐b‐PDMAEMA⁺), with the PIB blocks in the DP_n = 50–200 range (number‐average molecular weight = 3,000–9000 g/mol) connected to blocks of PDMAEMA⁺ cations in the DP_n = 5–20 range (where DP is the number‐average degree of polymerization). The overall synthetic strategy for the preparation of these block cationomers had four steps: (1) synthesis by living cationic polymerization of mono‐ and diallyltelechelic polyisobutylenes, (2) end‐group transformation to obtain PIBs fitted with termini capable of mediating the atom transfer radical polymerization (ATRP) of DMAEMA, (3) ATRP of DMAEMA, and (4) quaternization of PDMAEMA to PDMAEMA ⁺I^? by CH₃I. Scheme 1 shows the microarchitecture and outlines the synthesis route. Kinetic and model experiments provided guidance for developing convenient synthesis methods. The microarchitecture of PIB–PDMAEMA di‐ and triblocks and the corresponding block cationomers were confirmed by ¹H NMR and FTIR spectroscopy and solubility studies. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3679–3691, 2002     

Nuclear spin relaxation dynamics of 13CO2 sorbed in polyisobutene rubber

Recently we presented the dynamics of ¹³CO₂ molecules sorbed in silicone rubber (PDMS) ascertained from spin relaxation experiments. Results of a similar investigation for ¹³CO₂ sorbed in polyisobutene (PIB) are presented in this report. The spin-lattice and spin-spin relaxation times as well as nuclear Overhauser enhancements (NOE) were determined as a function of temperature and Larmor frequency. The relaxation mechanisms found to be important for ¹³CO₂/PIB system are intermolecular dipole-dipole relaxation and chemical shift anisotropy with a minor contribution from spin rotation relaxation. We have determined the parameters which characterize correlation times for ¹³CO₂ collisional motion, rotational motion, and translational motions in the PIB. The self-diffusion coefficient of 5.15 × 10^?8 cm²/s obtained from the nuclear magnetic resonance (NMR) data is close to the literature value of the mutual diffusion coefficient of CO₂ in PIB at 300 K obtained from permeability measurements. In contrast to the case of CO₂/PDMS in which a broad distribution (characterized by a fractional exponential correlation function of the Williams-Watts type with α = 0.58) is observed, a sharp distribution with a fractional exponent, α, of 0.99 is found for the CO₂/PIB system. Instead of assuming an Arrhenius type temperature dependence, we used a Williams-Landel-Ferry type temperature dependence and found it to be better suited to describe the behavior of this system. PIB is a densely packed “strong” chain polymer which responds gradually to the temperature variation and gas sorption. In contrast PDMS is a relatively loosely packed “fragile” polymer with a propensity to exhibit rapid dynamic responses to the temperature change and gas sorption. © 1993 John Wiley & Sons, Inc.     

Low cost bifunctional initiators for bidirectional living cationic polymerization of olefins. II. hyperbranched styrene–isobutylene–styrene triblocks with superior combination of properties

Both bifunctional initiators, the new low cost bBCB‐diCl [4,9‐dichloro,2,4,7,9‐tetramethyl‐tricyclo[6.2.0.0³⁶]deca‐1(8),2,6‐triene] and the universally used “hindered” HDCCl [1‐(tert‐butyl)‐3,5‐bis(2‐chloropropan‐2‐yl)benzene] induce the living bidirectional block copolymerization of isobutylene (IB) followed by styrene (St), and produce PSt‐b‐PIB‐b‐PSt (SIBS) triblocks. We discovered that the molecular weights of triblocks kept significantly increasing long after St conversion reached completion during syntheses. Results were explained by the formation of blends consisting of the expected linear SIBS plus hyperbranched SIBS, HB(SIBS)_n. The structure of high molecular weight (>10⁶ g/mol) HB(SIBS)_n was characterized by various techniques, and key properties of SIBS/HB(SIBS)_n blends were investigated. The mechanism of HB(SIBS)_n formation and the synthesis of SIBS/HB(SIBS)_n blends was elucidated. The properties of SIBS/HB(SIBS)_n blends are superior to those of SIBS. Thus, whereas SIBS exhibits ∼25 MPa tensile strength and ∼450% elongation, SIBS/HB(SIBS)_n blends exhibit 25–27 MPa tensile strength and >400% elongation; deformation under constant load of SIBS is ∼12%, whereas that of SIBS/HB(SIBS)_n is <1%; permanent set of SIBS is 1.3% whereas that of SIBS/HB(SIBS)_n is <0.5%. SIBS/HB(SIBS)_n blends also exhibit higher yield, yield strength, and toughness than SIBS. The microstructure/property relationship of HB(SIBS)_n is discussed and the reasons for enhanced properties of SIBS/HB(SIBS)_n blends are analyzed. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 705–713