Direct Synthesis of Gold Nanoparticle‐Over‐Nanosheet for Sensitive SERS Detection

A simple ethanol sol‐based method for the synthesis of gold nanosheets (AuNSs) and gold nanoparticle‐over‐nanosheet (AuNP/NS) is developed. Gold nanoparticles (AuNPs) with average sizes of ≈8 nm are grown in situ on the surface of the AuNS, which forms a NP/NS structure that obtains strong, significantly improved, surface‐enhanced Raman spectroscopy activity with the magnitude ≈2 and ≈6 orders higher than the simplex AuNP and AuNS, respectively. This performance is mainly attributed to uniform AuNPs that are closely packed over AuNS and coupled with NP–NS and NP–NP interactions. The NP–NS–GP (the gap between NP–NS) is narrower than NP–NP–GP in which much stronger and steadier plasmon resonance is obtained that can significantly enhance the Raman signal. The results show that single‐crystalline AuNS is an ideal substrate, which can be further coated with other metallic NPs to form a new flexible, high‐activity and AuNS‐based nanocomposite for a wide variety of applications.     

The Effect of ζ‐Potential and Hydrodynamic Size on Nanoparticle Interactions in Hydrogels

The ζ‐potential and hydrodynamic size (d_h) of nanoparticles (NPs) are systematically controlled by capping gold NPs (AuNPs) with polymers having different charges and treating them in NaCl solutions of diverse concentrations. Interactions between AuNPs in hydrogel are caused by chemical reactions induced by 1,4‐dithiothreitol. The effect of ζ‐potential is clear, as negatively charged AuNPs can be aggregated in neutral agarose gel, but the amount of aggregation is significantly affected by the magnitude of the negative surface charge on the AuNPs. However, all positively charged AuNPs show negligible aggregation in agarose gel with slightly negative polarity. The effect of d_h on AuNP aggregation is different from that of ζ‐potential. Although AuNPs with small d_h generally show more aggregation than those with large d_h, the amount of AuNP capping layer is critical. Thus, the amount of polymer present on NP surface needs to be considered to investigate the effect of d_h on AuNP aggregation. Through extended Derjaguin, Landau, Verwey, Overbeek (XDLVO) theory, it is shown that the charges of the AuNPs and the hydrogel, as well as the d_h of the NPs, are related to electrostatic repulsion and steric hindrance, which affect AuNP aggregation in hydrogel.     

Destabilization of Thiolated Gold Clusters for the Growth of Single‐Crystalline Gold Nanoparticles and Their Self‐Assembly for SERS Detection

Thiolate‐protected gold nanoclusters with high chemical stability are exploited extensively for fundamental research and utility in chosen applications. Here for the first time, the controlled destabilization of extraordinarily stable thiolated gold clusters for the growth of single‐crystalline gold nanoparticles (AuNPs) is demonstrated, which was achieved simply via the oxidation of surface‐protecting thiolates into disulfides by hydrogen peroxide under basic condition. By combining with our experimental observations over the entire destabilization and growth process, the new growth mechanism from clusters to AuNPs is revealed by density functional theory (DFT) calculations. It is found that the size of AuNPs decreases with the increase of hydrogen peroxide concentration due to the generation of more nuclei at the higher hydrogen peroxide concentrations. In addition, the preparation of AuNPs is tuned by changing the concentration of hydrogen peroxide, and they are self‐assembled into microspheres via an evaporation‐mediated process, which can induce strong plasmonic coupling between adjacent AuNPs for ultrasensitive surface‐enhanced Raman scattering detection. The present work demonstrates a facile route to functionalize and engineer AuNPs via controlling the reaction conditions and the ratio of precursors, and thus bring new possibilities for using more clusters as precursors to construct novel nano/microstructures for various applications.     

PEGylated Luminescent Gold Nanoclusters: Synthesis,Characterization, Bioconjugation,and Application to One‐ and Two‐Photon Cellular Imaging

Biocompatible, near‐infrared luminescent gold nanoclusters (AuNCs) are synthesized directly in water using poly(ethylene glycol)‐dithiolane ligands terminating in either a carboxyl, amine, azide, or methoxy group. The ≈1.5 nm diameter AuNCs fluoresce at ≈820 nm with quantum yields that range from 4–8%, depending on the terminal functional group present, and display average luminescence lifetimes approaching 1.5 μs. The two‐photon absorption (TPA) cross‐section and two‐photon excited fluorescence (TPEF) properties are also measured. Long‐term testing shows the poly(ethylene glycol) stabilized AuNCs maintain colloidal stability in a variety of media ranging from saline to tissue culture growth medium along with tolerating storage of up to 2 years. DNA and dye‐conjugation reactions confirm that the carboxyl, amine, and azide groups can be utilized on the AuNCs for carbodiimide, succinimidyl ester, and Cu^I‐assisted cycloaddition chemistry, respectively. High signal‐to‐noise one‐ and two‐photon cellular imaging is demonstrated. The AuNCs exhibit outstanding photophysical stability during continuous‐extended imaging. Concomitant cellular viability testing shows that the AuNCs also elicit minimal cytotoxicity. Further biological applications for these luminescent nanoclustered materials are discussed.     

Ultrahigh‐Density Plasmonic‐Nanoparticle‐Sensitized Semiconductor Photocatalysts Profit from Cooperative Light Harvesting and Charge Separation Processes: Experiments,Simulations, and Multifunctional Plasmonics

Here, a controlled synthesis of remarkable 3D photocatalysts is presented that is composed of ultrahigh‐density unaggregated plasmonic Au nanoparticles (AuNPs) chemically bound to vertically aligned ZnO nanorod arrays (ZNA) through bifunctional molecular linkers. Experimental probes and electromagnetic simulations of electron transfer and localized plasmonic coupling processes are exploited to gain insight into the underlying light‐irradiation‐induced interactions in the 3D ZNA–AuNPs photocatalysts. Highly dense AuNPs on ZNA surfaces act as sinks for the storage of UV‐generated electrons, which promote the separation of charge carriers and create numerous photocatalytic reaction centers. Furthermore, 3D finite‐difference time domain simulation indicates that significant visible light confinement and enhancement around the ZNA–AuNPs interfacial plasmon “hot spots” contribute to efficient conversion of light energy to electron‐hole pairs. Significantly, in comparison with the bare ZNA, the 10‐nm‐sized AuNPs‐decorated ZNA exhibits 10.6‐fold enhanced photoreaction rate in the entire UV–vis region. Moreover, various novel hybrid structures based on the plasmonic AuNPs and diverse nanostructures (films, powdered nanorods, mesoporous, and nanotubes) or functional materials (multiferroic BiFeO₃, CuInGaSe₂ absorber layers, and photoactive TiO₂) are successfully constructed using the present synthesis methodology. It may stimulate the progress in materials science toward the synthesis of multifunctional plasmonic heterostructures or devices.     

Novel Synthesis and Characterization of Doxycycline‐Loaded Gold Nanoparticles: The Golden Doxycycline for Antibacterial Applications

Doxycycline (DOXY) is a tetracycline antibiotic with a potent antibacterial activity against a wide variety of bacteria. One potential strategy to enhance the penetration and the antibacterial activity of antibiotics is the use of nanotechnology. In this work, an innovative synthesis of stable PEGylated‐gold nanoparticles (PEG‐AuNPs) loaded with DOXY is reported. As far as it is known, this is the first report on the combination of DOXY with AuNPs as polymeric complex. The obtained nanoparticles are fully characterized by transmission electron microscopy, dynamic light scattering, zeta‐potential, and UV–vis and Raman spectroscopy. The stability and sustained activity of the drug in nanoparticles is determined on a panel of Gram‐positive and Gram‐negative bacteria in comparison with the native form of the drug. This combined therapeutic agent restores the susceptibility of DOXY and shows an antibacterial activity against major human pathogens.     

Efficiency Improvement in Polymer Light‐Emitting Diodes by “Far‐Field” Effect of Gold Nanoparticles

The “far‐field” effect of metal nanoparticles (NPs), when chromophores localized nearby metal NPs (typically the distance >λ/10), is an important optical effect to enhance emission in photoluminescence. The far‐field effect originates mainly from the interaction between origin emission and mirror‐reflected emission, resulting in the increased irradiative rate of chromophores on the mirror‐type substrate. Here, the far‐field effect is used to improve emission efficiency of polymer light‐emitting diodes (PLEDs). A universal performance improvement is achieved for the full visible light (red, green, blue) PLEDs, utilizing gold (Au) NPs to modify the indium tin oxide (ITO) substrates; this is shown by experimental and theoretical simulation to mainly come from the far‐field effect. The optimized distance, between the NPs and chromophores with visible light emission ranging from 400 to 700 nm, is 80–120 nm. Thus the scope of the far‐field may overlap the light‐emitting profile very well to enhance the efficiency of optoelectronic devices. The 30–40% enhancement is obtained for different color‐emitting materials through distance optimization. The far‐field effect is demonstrated to enhance device performance for materials in the full‐visible spectral range, which extends the optoelectric applications of Au NPs.     

Self‐Assembled Fluorescent and Antibacterial GHK‐Cu Nanoparticles for Wound Healing Applications

GHK‐Cu is demonstrated with the abilities to improve wound healing, accelerate anti‐inflammatory activity, and repair DNA damage. However, the instability of the GHK‐Cu in biological fluids is always a big challenge for its long‐term and efficient function at the target site. Therefore, the self‐assembled GHK‐Cu nanoparticles (GHK‐Cu NPs) are investigated in this work to solve the instability issue. The crystalline nanostructure within the GHK‐Cu nanoparticles offers them visible and near‐infrared fluorescent properties. With the excellent self‐assembly performance, the antibacterial properties of GHK‐Cu NPs are demonstrated using E. coli and S. aureus. The L929 dermal fibroblast cells are utilized to prove the good biocompatibility and enhanced wound healing applications of GHK‐Cu NPs. This study could pave the way for the design and elaboration of a new class of fluorescent peptides with various biological functions in biomedical applications.     

Nuclear Uptake of Gold Nanoparticles Deduced Using Dual‐Angle X‐Ray Fluorescence Mapping

Studies into the cell nucleus' incorporation of gold nanoparticles (AuNPs) are often limited by ambiguities arising from conventional imaging techniques. Indeed, it is suggested that to date there is no unambiguous imaging evidence for such uptake in whole cells, particularly at the single nanoparticle level. This shortcoming in understanding exists despite the nucleus being the most important subcellular compartment in eukaryotes and gold being the most commonly used metal nanoparticle in medical applications. Here, dual‐angle X‐ray flouresence is used to show individually resolved nanoparticles within the cell nucleus, finding them to be well separated and 79% of the intranuclear population to be monodispersed. These findings have important implications for nanomedicine, illustrated here through a specific exemplar of the predicted enhancement of radiation effects arising from the observed AuNPs, finding intranuclear dose enhancements spanning nearly five orders of magnitude.     

Negative‐Imaging of Citrate Layers on Gold Nanoparticles by Ligand‐Templated Metal Deposition: Revealing Surface Heterogeneity

Surface heterogeneity of a metal nanoparticle is typically regarded as boundary defects and various crystalline facets. While organic capping ligands of a single type are assumed to be homogeneously distributed on the nanoparticle surface, heterogeneous surface coverage of citrate molecules on individual facets of gold nanoparticles (AuNPs) is revealed. Pt metallic clusters with 2 nm in diameter, epitaxially grown on the surface of AuNPs by chemical reaction and imaged by high‐resolution transmission electron microscopy, are utilized as negative‐imaging probes for densely packed adlayers where the underneath gold surface may not be accessible for Pt deposition. At pH > 5.0, citrate anions form only a loosely packed layer. At pH 4.5, citrates and citric acids form both loosely packed and densely packed layers that appear phase separated, and the densely packed domain as small as 5 nm × 5 nm is likely composed of fully protonated citric acids. IR spectra indicate that citric acid binds to a surface Au adatom through the oxygen atom of the central hydroxyl group, and similarly, citrate anions bind to Au adatoms through the carboxylate oxygen atom. This study also reveals the role of Au adatom in the adsorption of citrate species on the metallic surface of AuNPs.     

Towards Excellent Anodes for Li‐Ion Batteries with High Capacity and Super Long Lifespan: Confining Ultrasmall Sn Particles into N‐Rich Graphene‐Based Nanosheets

Sn is regarded as a promising anode material for Li‐ion batteries due to high capacity and cost effectiveness. Hitherto large‐scale fabrication of Sn‐based materials while achieving both high capacity and long cycle life remains challenging, but it is highly required for its realization in practical applications. Furthermore, low melting point always casts shadow over the morphology‐controllable preparation, and leads to multistep or high‐cost processes. Here, a facile and scalable method is devised for a 2D hybrid structure of Sn@graphene‐based nanosheets incorporating of optimized nitrogen species (≈13 wt%). Distinct from conventional Sn–C composites, the fairly N‐rich carbon nanosheets liberate limited potential of low N doping, induce massive extra Li‐storage sites, and encourage a high capacity significantly. In addition, these abundantly anchored heteroatoms also promote the homogeneous dispersion and robust confinement of ultrasmall Sn nanoparticles into the flexible graphene‐based nanosheets. This elastic encapsulation towards Sn nanoparticles admirably maintains structural integrity through effective remission of volume expansion, demonstrating a super long‐term cyclic stability for 1000 cycles. This structural and componential engineering offers a significant implication for rational design of materials in extended areas of energy conversion and storage.     

Structure‐Making Effects of Metal Nanoparticles in Amyloid Peptide Fibrillation

There is growing concern that nanoparticles (NPs) may accelerate amyloid protein aggregation and thus cause amyloid‐related diseases. Here, the potential of silver and gold NPs is explored (diameter 20 nm) on the aggregation of the amyloid peptide sequences NNFGAIL from human islet amyloid polypeptide and the yeast prion protein sequence GNNQQNY, which are both the sequences of the full systems, which are able to aggregate into characteristic amyloid cross‐beta sheet fibrillar structures. Here, it is shown that silver and gold NPs in physiological aqueous solution at ambient temperatures accelerate the aggregation kinetics of both peptides significantly (in vitro). Scanning electron microscopy and X‐ray diffraction provide solid evidence for a “structure‐making” effect of the NPs. In particular, we are able to image the initial peptide corona and measure its structural reorganization in time‐resolved kinetic experiments. After a conversion time Δt, the coated NPs appear to act as templates or seeds for rapid fibrillation. Interestingly, cross‐fibrillation experiments with different peptide‐coated NPs (pcNPs) reveal that they can efficiently induce aggregation of similar peptides once the pcNPs are structurally converted. It is discussed that these structurally converted pcNPs may display similar kinetic features as toxic and aggregation inducing oligomers/protofibrils in normal amyloid aggregation, without being transient and very low‐concentration species. Finally, we suggest and discuss a simple mechanistic picture with the biomolecule corona of NPs being central to the function of the coated NPs in amyloid fibrillation.     

Human‐Serum‐Albumin‐Coated Prussian Blue Nanoparticles as pH‐/Thermotriggered Drug‐Delivery Vehicles for Cancer Thermochemotherapy

Constructing novel multimodal antitumor therapeutic nanoagents has attracted tremendous recent attention. In this work, a new drug‐delivery vehicle based on human‐serum‐albumin (HSA)‐coated Prussian blue nanoparticles (PB NPs) is synthesized. It is demonstrated that doxorubicin (DOX)/HSA is successfully loaded after in situ polymerization of dopamine onto PB NPs, and the PB@PDA/DOX/HSA NPs are highly compatible and stable in various physiological solutions. The NPs possess strong near‐infrared (NIR) absorbance, and excellent capability and stability of photothermal conversion for highly efficient photothermal therapy applications. Furthermore, a bimodal on‐demand drug release sensitively triggered by pH or NIR irradiation has been realized, resulting in a significant chemotherapeutic effect due to the preferential uptake and internalization of the NPs by cancer cells. Importantly, the thermochemotherapy efficacy of the NPs has been examined by a cell viability assay, revealing a remarkably superior synergistic anticancer effect over either monotherapy. Such multifunctional drug‐delivery systems composed of approved materials may have promising biomedical applications for antitumor therapy.     

Dual plasmonic‐enhanced bulk‐heterojunction solar cell incorporating gold nanoparticles into solution‐processed anode buffer layer and active layer

A dual plasmonic resonance effect on the performance of poly(3‐hexylthiophene) (P3HT):phenyl C61‐butyricacid methyl ester (PC61BM) based polymer solar cells (PSCs) has been demonstrated by selectively incorporating 25 nm colloidal gold nanoparticles (Au NPs) in a solution‐processed molybdenum oxide (MoO₃) anode buffer layer and 5 nm colloidal Au NPs in the active P3HT:PCBM layer. The devices exhibit up to ～20% improvement in power conversion efficiency which is attributed to the dual effect of localized surface plasmon resonance (LSPR) of Au NPs with enhanced light absorption and exciton generation. Our report shows a guideline on the usage of dual LSPR effect for the solution‐processed polymer solar cells to achieve high efficiencies. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Efficient and Rapid Synthesis of Radioactive Gold Nanoparticles by Dielectric Barrier Discharge

A compact bench‐top system based on a dielectric barrier plasma discharge (DBD), enables the rapid, automatable, and continuous‐flow synthesis of gold nanoparticles (AuNPs) and radioactive gold nanoparticles (¹⁹⁸AuNPs). AuNPs are used as radiosensitizers in oncology, and ¹⁹⁸AuNPs (half‐life: 2.7 d) have been suggested as potential cancer brachytherapy sources. Plasma applied at the surface of a liquid containing gold ions (AuCl₄^?) and dextran induces the production of AuNPs directly in water. This synthesis is monitored in real time by UV–visible spectrometry: the change of absorbance of the solution provides new insights on the growth dynamics of AuNPs by plasma synthesis. By balancing gold ions and surfactant molecules, particles with a diameter lying in the optimal range for radiosensitizing applications (28 ± 9 nm) are produced. The method yields a reduction of more than 99% of the gold ions within only 30 min of plasma treatment. A postsynthesis ripening of the AuNPs is revealed, monitored by UV–visible spectrometry, and quantified within the first few hours following plasma treatment. Radioactive ¹⁹⁸AuNPs are also produced by DBD synthesis and characterized by electron microscopy and single‐photon emission computed tomography imaging. The results confirm the efficiency of DBD reactors for AuNPs synthesis in oncology applications.     

Lock‐In Thermography to Analyze Plasmonic Nanoparticle Dispersions

The physicochemical properties of nanoparticles (NPs) strongly rely on their colloidal stability, and any given dispersion can display remarkably different features, depending on whether it contains single particles or clusters. Thus, developing efficient experimental methods that are able to provide accurate and reproducible measures of the NP properties is a considerable challenge for both research and industrial development. By analyzing different NPs, through size and concentration, it is demonstrated that lock‐in thermography, based on light absorption and heat generation, is able to detect and differentiate the distinct aggregation and re‐dispersion behavior of plasmonic NPs, e.g., gold and silver. Most importantly, the approach is nonintrusive and potentially highly cost‐effective compared to standard analytical techniques.     

Enhanced Physiological Stability and Long‐Term Toxicity/Biodegradation In Vitro/In Vivo of Monodispersed Glycerolphosphate‐Functionalized Bioactive Glass Nanoparticles

Monodispersed bioactive glass nanoparticles (BGNs) have received much attention in various biomedical applications such as tissue regeneration, drug/gene delivery, bioimaging, and cancer therapy. However, the poor dispersion stability of BGNs in a physiological environment has limited their wide biomedical applications. The long‐term in vitro/in vivo toxicity and biodegradation of BGNs are also not clear. Monodispersed glycerolphosphate‐functionalized BGNs (GP‐BGN) are synthesized and their stability under physiological environment in vitro, and long‐term biodegradation behavior in vitro and in vivo are investigated herein. GP‐BGN shows significantly enhanced particles stability in physiological environment, good hemocompatibility and cellular biocompatibility, as well as high cellular uptake ability. GP‐BGN also exhibits long‐term biodegradation behavior in vitro/in vivo and negligible biotoxicity (tissue and blood toxicity). This study demonstrates that monodispersed surface‐functionalized BGNs could be used as biocompatible and biodegradable nanomaterials for long‐term safe bioimaging and disease therapy.     

Ageing of Alkylthiol‐Stabilized Gold Nanoparticles

The ageing of spherical gold nanoparticles having 6‐nm‐diameter cores and a ligand shell of dodecanethiol is investigated under different storage conditions. Losses caused by agglomeration and changes in optical particle properties are quantified. Changes in colloidal stability are probed by analytical centrifugation in a polar solvent mixture. Chemical changes are detected by elementary analysis of particles and solvent. Fractionation occurs under all storage conditions. Ageing is not uniform but broadens the property distributions of the particles. Small‐number statistics in the ligand shell density and the morphological heterogeneity of particles are possible explanations. Washing steps exacerbate ageing, a process that could not be fully reversed by excess ligands. Dry storage is not preferable to storage in solvent. Storage under inert argon atmosphere reduces losses more than all other conditions but could not prevent it entirely.     

Investigation of Abnormal Long‐Wavelength Fluorescence Emissions Occurring in Binary Organic Nanoparticle Films

In some fluorophores with planar groups, a long‐wavelength emission band different from their native one can sometimes be observed. The main cause of this long‐wavelength band is excimer formation. It is generally accepted that once condensed in the solid state, whether fluorophores can exhibit excimer emission or not depends only on their molecular structure and packing. However, here it is shown that there are exceptions when fluorophores are present in nanoparticles (NPs), where excimer emission can be affected by the environment surrounding the NPs, even in the solid state. It is found that in some binary NP films consisting of fluorophore NPs and other NPs, unusual long‐wavelength bands ascribed to excimer emission can be activated, even though these bands are absent from the photoluminescence spectra of the pure fluorophore NP films. This finding is beneficial to better understand and control excimer emissions. In addition, such a binary NP system provides an ideal platform to investigate the interplay between two fluorophores, because it keeps them effectively separated while maintaining suitable spatial distances for exciton migration and dipole–dipole interactions. This work also provides evidence for the long‐debated origin of the green emission band (g‐band) of fluorene‐based fluorophores.