Raman spectroscopy of combinatory anticancer drug release from gold nanoparticles inside a single leukemia cell

Combinatory anticancer drug release from gold nanoparticles (AuNPs) in K562 human myeloid leukemia cells was performed using Raman spectroscopy. We fabricated the anticancer drug of imatinib as a BCR‐ABL tyrosine kinase inhibitor on AuNP surfaces along with a transferrin (Tf)‐targeting moiety to treat the leukemia cells. DNA topoisomerase I inhibitor topotecan was also assembled to monitor its fluorescence onto AuNPs. The linker group of 4‐carboxylic benzoic acid was used to conjugate to targeting the Tf protein. Our Raman data indicated that the drug molecules were not detached in the cell culture media but released after treatment with glutathione (2 mM). Intracellular distribution and release of the anticancer drug–AuNP conjugates in K562 cells were examined by both fluorescence microscopy and dark‐field microscopy with surface‐enhanced Raman scattering. Copyright © 2013 John Wiley & Sons, Ltd.     

The Effect of ζ‐Potential and Hydrodynamic Size on Nanoparticle Interactions in Hydrogels

The ζ‐potential and hydrodynamic size (d_h) of nanoparticles (NPs) are systematically controlled by capping gold NPs (AuNPs) with polymers having different charges and treating them in NaCl solutions of diverse concentrations. Interactions between AuNPs in hydrogel are caused by chemical reactions induced by 1,4‐dithiothreitol. The effect of ζ‐potential is clear, as negatively charged AuNPs can be aggregated in neutral agarose gel, but the amount of aggregation is significantly affected by the magnitude of the negative surface charge on the AuNPs. However, all positively charged AuNPs show negligible aggregation in agarose gel with slightly negative polarity. The effect of d_h on AuNP aggregation is different from that of ζ‐potential. Although AuNPs with small d_h generally show more aggregation than those with large d_h, the amount of AuNP capping layer is critical. Thus, the amount of polymer present on NP surface needs to be considered to investigate the effect of d_h on AuNP aggregation. Through extended Derjaguin, Landau, Verwey, Overbeek (XDLVO) theory, it is shown that the charges of the AuNPs and the hydrogel, as well as the d_h of the NPs, are related to electrostatic repulsion and steric hindrance, which affect AuNP aggregation in hydrogel.     

Display of Potassium Channel–Blocking Tertiapin‐Q Peptides on Gold Nanoparticles Enhances Depolarization of Cellular Membrane Potential

The use of nanoparticle (NP) systems to control cellular physiology, including membrane potential, can facilitate furthered understanding of many disparate cellular processes ranging from cellular proliferation to tissue regeneration. A gold NP (AuNP) bioconjugate system based on the honeybee venom peptide, tertiapin‐Q (AuNP‐TPN‐Q), that depolarizes membrane potential by targeting inward rectifier potassium channels (Kir), is developed. The conjugate elicits, in a peptide concentration–dependent manner, a greater and more rapid depolarization response compared to the free peptide alone. The specificity of the interaction of the AuNP‐TPN‐Q conjugate with the Kir channel using immunocytochemistry and competition binding assays is confirmed. It is further shown that membrane depolarization is photothermally reversible via the laser‐induced plasmonic heating of the AuNP, providing a level of control over Kir channels not afforded by currently available drugs. The functional nanobioconjugate described herein provides a new research tool for understanding the intricacies of ion channel activity and the modulation of cellular membrane potential.     

The Competitive Dynamic Binding of Some Blood Proteins Adsorbed on Gold Nanoparticles

Nanoparticle (NP) surfaces are modified immediately by the adsorption of proteins when injected into human blood, leading to the formation of a protein corona. The protein‐coated NPs may be recognized by living cells. Furthermore, the adsorption of serum proteins is a continuous competitive dynamic process that is the key to exploring the bioapplication and biosafety of NPs. In this study, the competitive dynamic adsorption of some serum proteins on gold nanoparticles (AuNPs) is investigated by fluorescence emission, dynamic light scattering, and sodium dodecyl sulfate‐polyacrylamide gel electrophoresis. Serum proteins with different AuNPs binding affinities are used to address the competitive dynamic process of protein‐AuNP interactions in vitro. The results show that more abundant serum proteins, such as human serum albumin, adsorb on AuNPs first, and then the higher binding affinity and lower concentration serum proteins, such as fibrinogen (FIB), replace the abundant and lower binding affinity serum proteins. However, the lower binding affinity serum proteins, such as hemoglobin, do not replace the higher binding affinity proteins from the protein‐AuNP conjugates. During the dynamic exchange process, the larger the binding affinities difference between two proteins, the faster the exchange rate. This dynamic exchange process usually takes longer in inner protein‐AuNP conjugates (hard corona) than the external surface of protein‐AuNP conjugates (soft corona).     

Assembly of Gold Nanoparticles on Gold Nanorods Using Functionalized Poly(N‐isopropylacrylamide) as Polymeric “Glue”

A telechelic thermoresponsive polymer, α‐amino‐ω‐thiol‐poly(N‐isopropylacrylamide) (H₂N‐PNiPAM‐SH), is used as the polymeric glue to assemble gold nanoparticles (AuNPs) around gold nanorods (AuNRs) into a satellite structure. Prepared by reversible addition‐fragmentation chain transfer polymerization followed by hydrazinolysis, H₂N‐PNiPAM‐SH is able to interlink the two types of the gold building blocks with the thiol‐end grafting on AuNRs and the amine‐end coordinating on the AuNP surface. The density of the grafted AuNPs on AuNRs can be tuned by adjusting the molar ratio between AuNPs and AuNRs in the feed. The resulted satellite‐like assembly exhibits unique optical property that was responsive to temperature change.     

SERS detection of polychlorinated biphenyls using β‐cyclodextrin functionalized gold nanoparticles on agriculture land soil

A highly sensitive surface‐enhanced Raman scattering (SERS) platform for the selective trace analysis of persistent organic pollutant (POP) such as polychlorinated biphenyl (PCBs) was reported based on β‐CD modified gold nanoparticles (AuNPs) with the real environmental sample of polluted soil. The synthesized gold nanoparticles were characterized using UV–vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) and transmission electron microscopy (TEM). In polluted soil the presentation of PCB is confirmed by using GC‐MS. It is further verified and confirmed by using SERS. When the contaminated soil was added to the system, the binding of soil with β‐CD resulted in the aggregation of AuNPs, and excellent Raman signal was obtained which can reflect the isomers of polychlorinated biphenyls. Copyright © 2015 John Wiley & Sons, Ltd.     

Shape Matters: A Gold Nanoparticle Enabled Shape Memory Polymer Triggered by Laser Irradiation

With incorporation of gold nanoparticles, i.e., nanorods (AuNR) and nanospheres (AuNS), into a polyurethane‐based shape‐memory polymer (SMP) EG‐72D matrix, SMP nanocomposite films capable of being remotely triggered by low‐power laser are fabricated and characterized using UV‐vis‐NIR spectroscopy, X‐ray scattering, and dynamic mechanical analysis (DMA). It is demonstrated that, with incorporation of very low concentration of gold nanorods (≈0.1 wt%), the mechanically programmed EG‐72D/AuNR nanocomposite presents rapid response to low power laser irradiation (785 nm, ≈10 mW). Comparative studies on the laser irradiation response of EG‐72D/AuNS and EG‐72D/AuNR nanocomposite films suggest that AuNRs have significantly higher photothermal conversion efficiency than AuNS and on‐resonance laser irradiation, matching the wavelength of the incident laser with the longitudinal plasmon resonance of AuNR, is necessary to induce the fast response of gold nanoparticle enabled SMP nanocomposites.     

High–Yield Production of Uniform Gold Nanoparticles with Sizes from 31 to 577 nm via One‐Pot Seeded Growth and Size‐Dependent SERS Property

In this work, uniform, quasi‐spherical gold nanoparticles (Au NPs) with sizes of 31–577 nm are prepared via one‐pot seeded growth with the aid of tris‐base (TB). Distinct from the seeded growth methods available in literature, the present method can be simply implemented by subsequently adding the aqueous dispersion of the 17 nm Au‐NP seeds and the aqueous solution of HAuCl₄ into the boiling aqueous TB solution. It is found that at the optimal pH range, the sizes of the final Au NPs and their concentrations are simply controlled by either the particle number of the Au seed dispersion or the concentration of the HAuCl₄ solution, while the latter enables us to produce large Au NPs at very high concentration. Moreover, as‐prepared Au NPs of various sizes are coated on glass substrates to test their surface‐enhanced Raman scattering (SERS) activities by using 4‐aminothiophenol (4‐ATP) molecules as probes, which exhibit “volcano type” dependence on the Au NP sizes at fixed excitation wavelength. Furthermore, the Au NPs with sizes of ≈97 and 408 nm exhibit the largest SERS enhancement at the excitation wavelength of 633 and 785 nm, respectively.     

Destabilization of Thiolated Gold Clusters for the Growth of Single‐Crystalline Gold Nanoparticles and Their Self‐Assembly for SERS Detection

Thiolate‐protected gold nanoclusters with high chemical stability are exploited extensively for fundamental research and utility in chosen applications. Here for the first time, the controlled destabilization of extraordinarily stable thiolated gold clusters for the growth of single‐crystalline gold nanoparticles (AuNPs) is demonstrated, which was achieved simply via the oxidation of surface‐protecting thiolates into disulfides by hydrogen peroxide under basic condition. By combining with our experimental observations over the entire destabilization and growth process, the new growth mechanism from clusters to AuNPs is revealed by density functional theory (DFT) calculations. It is found that the size of AuNPs decreases with the increase of hydrogen peroxide concentration due to the generation of more nuclei at the higher hydrogen peroxide concentrations. In addition, the preparation of AuNPs is tuned by changing the concentration of hydrogen peroxide, and they are self‐assembled into microspheres via an evaporation‐mediated process, which can induce strong plasmonic coupling between adjacent AuNPs for ultrasensitive surface‐enhanced Raman scattering detection. The present work demonstrates a facile route to functionalize and engineer AuNPs via controlling the reaction conditions and the ratio of precursors, and thus bring new possibilities for using more clusters as precursors to construct novel nano/microstructures for various applications.     

A Paper‐Based Platform for Long‐Term Deposition of Nanoparticles with Exceptional Redispersibility,Stability, and Functionality

Although nanoparticles (NPs) can be carefully engineered to have maximal stability and functionality desirable for use in diverse applications, they are generally not suitable for long‐term storage in solution. It is also difficult to store NPs in a dry state because dried NPs generally become aggregated and cannot easily be redispersed. Thus, a new strategy allowing long‐term storage of NPs with high stability, redispersibility, and functionality is highly demanded. By passivating the 13 nm gold nanoparticle (AuNP) surface with stabilizing agents and treating a paper substrate with both bovine serum albumin and sucrose after coating with a hydrophobic polyvinyl butyral layer, it is possible to fully redisperse (≈100%) dried AuNPs with colloidal stability comparable to that of as‐prepared AuNPs. Furthermore, AuNPs physically stabilized with polyvinylpyrrolidone can react with thiol‐containing compounds, such as 1,4‐dithiothreitol (DTT). Taking advantage of the oxidation reaction of hypochlorous acid with DTT, it is possible to demonstrate a paper‐based colorimetric sensor for detection of residual chlorine in water. Since this strategy is applicable to large‐sized AuNPs (30–90 nm), silver NPs, oleic acid‐capped magnetic NPs, and cetrimonium bromide‐passivated gold nanorods, it can be used for diverse NPs requiring long‐term storage for many applications.     

Steric hindrance in cationic and neutral rhodamine 6 G molecules adsorbed on Au nanoparticles

The adsorption of cationic and neutral R6G molecules on Au nanoparticles was elucidated by surface enhanced Raman scattering (SERS). The steric hindrance at hydroethyl amino (‐N(H)Et) groups in R6G was evidenced by the observation that R6G⁺ adsorb on as‐prepared gold nanoparticles (AuNPs) only with electrostatic forces, in contrast to the electrostatic and chemical adsorption of R123⁺ with dihydro amino (‐NH₂) groups on as‐prepared AuNPs. Large steric hindrance at the amino groups in R6G yielded saturated coverage of 700 molecules/AuNP for R6G⁺ significantly fewer than 1000 molecules/AuNP for R123⁺. In addition, neutral R6G⁰ on AuNPs showed markedly enhanced peaks at 1200–1600 cm⁻¹, which were not observed in Raman spectra of R6G⁰ in bulk solution, and also in SERS of R6G⁺ on AuNPs. These bands are attributed to vibrational modes of an outer phenyl ring and ethyl amino groups, which are vertical to a xanthene plane, on the basis of theoretical analysis of molecular vibrations. Thus, Raman scattering of these bands is enhanced under an inclined orientation of R6G⁰ molecules chemisorbed on AuNPs via lone pair electrons at amino groups. Copyright © 2013 John Wiley & Sons, Ltd.     

Gold Nanoparticles Stabilized by Single Tripodal Ligands

In order to coat the entire surface of gold nanoparticles (AuNPs) by a single ligand, tripodal macromolecules comprising benzylic thioethers coordinating to the AuNP surface are synthesized and their abilities to stabilize AuNPs are investigated. Out of the five studied ligands 1 – 5 , the tetraphenylmethane‐based oligomers 4 and 5 display excellent AuNP coating features. Both ligand structures are able to control the dimensions of the AuNPs by stabilizing particles of narrow size distributions during their syntheses (1.05 ± 0.28 nm for Au‐4 , and 1.15 ± 0.34 nm for Au‐5 ). Closer inspection of these AuNPs by transmission electron microscopy and thermogravimetric analyses suggests that single ligands 4 and 5 are able to stabilize entire AuNPs. These particles Au‐4 and Au‐5 are obtained in good yields and display promising thermal stabilities (110 °C for Au‐4 , and 95 °C for Au‐5 ), making them interesting nanoscale inorganic–organic building blocks for further functionalization/processing by wet chemistry.     

Detection of the potential tumor marker of AFP using surface‐enhanced Raman scattering‐based immunoassay

The development of rapid, highly sensitive detection methods for α‐fetoprotein (AFP) is very important. As hepatocellular carcinoma is closely related to the level of AFP in the blood, it is necessary to maintain an AFP concentration below the safety limit. In this paper, we propose a universal, rapid, sensitive, and highly specific immunoassay system utilizing gold nanoparticles (AuNPs) and surface‐enhanced Raman scattering (SERS). This new system features a sandwich structure combining mercaptobenzoic acid‐labeled immunogold nanoparticles with the antigen and the antibody atop a pre‐designed substrate made of a glass slide modified with AuNPs. This SERS‐based immunoassay can detect AFP concentrations as low as 100 pg/ml, which is a significant improvement on the capabilities of the enzyme‐linked immunosorbent assay method. A good linear relationship between the SERS peak intensity and the logarithm of antigen concentrations (from 1 ng/ml to 100 ng/ml) was observed. This technique provides an effective model for the detection of biomarkers in medical diagnostics, criminal investigation, and other fields. Copyright © 2013 John Wiley & Sons, Ltd.     

Unravelling Malaria Antigen Binding to Antibody‐Gold Nanoparticle Conjugates

Conjugates formed by antibody adsorption to gold nanoparticles (AuNP) have found extensive utilization in immunoassays due to the high surface area and interesting optical and electronic properties of the nanomaterials. Nevertheless, the mechanism of formation of antibody‐AuNP conjugates and their antigen binding characteristics have not been sufficiently explored in terms of specificity and consequent clinical applicability. Dynamic light scattering and related techniques have been successfully employed to detect antigen binding to antibody‐AuNP complexes. Here, a range of different techniques from the bionanotechnology realm have been applied to obtain a detailed picture of a competitive immunoassay for malaria antigen detection, based on fluorescence‐quenching by AuNPs. Both agarose gel electrophoresis and differential centrifugal sedimentation (DCS) analyses provide binding constants in the same order of magnitude, for antibody binding to AuNP and for antigen binding to antibody‐AuNP conjugates. Both techniques are also able to reveal inhibition of antigen binding in the presence of a major blood plasma protein, transferrin (via competitive binding). DCS is further used to show inhibition of the binding of the antigen in the presence of human plasma, a realistic testing condition, of high relevance to the implementation of immunoassays at the clinical level.     

Portable smart films for ultrasensitive detection and chemical analysis using SERS and SERRS

Metallic nanostructures, much smaller than the wavelength of visible light, which support localized surface plasmon resonances, are central to the giant signal enhancement achieved in surface‐enhanced Raman scattering (SERS) and surface‐enhanced resonance Raman scattering (SERRS). Plasmonic driven SERS and SERRS is a powerful analytical tool for ultrasensitive detection down to single molecule detection. For all practical SERS applications a key issue is the development of reproducible and portable SERS‐active substrates, where the most widely used metals for nanostructure fabrication are silver and gold. Here, we report the fabrication of a ‘smart film’, containing gold nanoparticles (AuNPs), produced by in situ reduction of gold chloride III (Au⁺³) in natural rubber (NR) membranes for SERS and SERRS applications. The composite films (NR/AuNP membranes) show characteristic plasmon absorption of Au nanostructures, which notably do not influence the mechanical properties of the NR membranes. The term ‘smart film’ has to do with the fact that the SERS substrate (smart film) is flexible and standalone, which allows one to take it anywhere and to dip it into solutions containing the analyte to be characterized by SERS or SERRS technique. Besides, the synthesis of the AuNPs at the surface of NR films is much simpler than making an Au colloid and cast it onto a substrate surface or preparing an Au evaporated film. Copyright © 2012 John Wiley & Sons, Ltd.     

Temperature–Light Dual‐Responsive Au@PNIPAm Core‐Shell Microgel‐Based Optical Devices

Au nanoparticle (AuNP) core particles coated with a poly(N‐isopropylacrylamide) (pNIPAm) shell (Au@pNIPAm) are synthesized by seed mediated free radical polymerization. Subsequently, a temperature–light‐responsive photonic device is fabricated by sandwiching the Au@pNIPAm particles between two thin layers of Au. The optical device exhibits visual color and characteristic multipeak reflectance spectra, where peak position is primarily determined by the distance between two Au layers. Dual responsivities of the photonic device are achieved by combining the photothermal effect of AuNPs core (localized surface plasmon resonance (LSPR) effect) and the temperature responsivity of the pNIPAm shell. That is, the pNIPAm shell collapses as the temperature is increased above pNIPAm's lower critical solution temperature, either by direct heat input or heat generated by AuNPs' LSPR effect. To investigate the effect of AuNPs distribution in the microgels on the devices' photothermal responsivity, the Au@pNIPAm microgel‐based etalon devices are compared with that fabricated by AuNP‐doped pNIPAm‐based microgels; in terms of response kinetics and optical spectrum homogeneity. The uniform Au@pNIPAm microgel‐based devices show a fast response and exhibit a comparatively homogeneous spectrum over the whole slide. These materials can potentially find use in drug delivery systems, active optics, and soft robotics.     

Nanoparticle Probes for Quantifying Supramolecular Determinants of Biosurface Affinity

Interactions between macromolecular systems and biosurfaces are complicated by the complexity of these multivalent interactions and challenges in quantifying affinities. In this study, a library of gold nanoparticles (AuNPs) with different functional head groups as multivalent probes to quantify biosurface affinity, using hair as a model targeted substrate, is used. The adhesion of the AuNPs is quantified by inductively coupled plasma mass spectrometry. Using this method it is demonstrated that multiple supramolecular forces affect affinity. As expected, electrostatic interaction is a strong driving force for adhesion of the nanoparticle tags onto hair in aqueous solution, evidenced by a much higher level of gold adsorption for cationic AuNPs compared to anionic or neutral AuNPs. Functionalized cationic AuNPs are synthesized with systematically varied terminal groups and are screened for deposition onto hair. AuNP adhesion onto hair in water generally decreases as a function of increasing hydrophobicity; however, electron‐rich aromatic rings provide significantly enhanced attachment. Although the intact, healthy hair cuticle is considered negatively charged and hydrophobic, the findings indicate that hydrophobic interactions are not as critical to deposition of AuNPs onto hair as the electrostatic component from the presence and accessibility of the cationic moieties, which are the greatest drivers for deposition onto hair.     

Design of Gold Nanoparticles in Dendritic Cell‐Based Vaccines

The design of effective cancer vaccines must be able to activate dendritic cells (DCs) of the innate immune system in order to induce immunity to pathogens and cancer. DCs patrol the body and once they encounter antigens, they orchestrate a complex mechanism of events and signals that can alert the adaptive immune system to action. However, DC‐based vaccines remain a challenge in part because the source and quality of antigens, the DC targeting molecule, type of adjuvant, and delivery vehicle must be optimized to induce a robust immune response. Gold nanoparticles (AuNPs) have now entered clinical trials as carriers due to their ease of functionalization with antigens, adjuvants, and targeting molecules. This progress report discusses how AuNPs can influence DC activation and maturation, as well as their potential impact on T helper (Th) differentiation. Ultimately, successful AuNP‐based DC vaccines are able to induce phagocytosis, activation/maturation, migration, T cell costimulation, and cytokine secretion, which is named AuNP‐induced DC tuning (AuNP‐DC tuning). Although at its infancy, understanding the processes of AuNP‐DC tuning will give a better understanding of how best to engineer AuNPs and will redefine the next generation of DC‐based vaccines.     

A high‐throughput method for controlled hot‐spot fabrication in SERS‐active gold nanoparticle dimer arrays

We present a high‐throughput method for fabricating large arrays of surface‐enhanced Raman scattering (SERS) active gold dimers. Using a large‐area/low‐cost nanopatterning method in conjunction with a meniscus force deposition technique, we were able to create large arrays of uniformly spaced nanoclusters comprising two 60‐nm gold nanospheres. Raman measurements of a thiophenol monolayer deposited on smaller scale arrays of aligned dimers yielded enhancement factors as high as 10⁹. Polarization‐controlled measurements show spectral peak heights to be 10–100 times smaller when the incident beam is polarized perpendicularly to the dimer axis, confirming that the measured enhancements arise from the ‘hot spots’ between the two nanospheres. Copyright © 2009 John Wiley & Sons, Ltd.