Highly Enhanced Emission of Visible Light from Core–Dual‐Shell‐Type Hybridized Nanoparticles

Core–dual‐shell‐type hybridized nanoparticles (NPs) having Au‐core/dye‐doped silica inner shell/Au outer shell are successfully fabricated by developing a biphasic process that is a kind of so‐called “one‐pot” method. The resulting hybridized NPs exhibit evidently about 20‐fold enhancement of fluorescence intensity, increase in fluorescence quantum yield, and decrease in fluorescence lifetime. These effects depend on the metal nanostructure being optimized, compared with the reference hybridized NPs with neither a Au‐core nor a Au outer shell, due to the gap‐mode effect induced by localized surface plasmon resonance in the core–dual‐shell‐type MIM‐like nanostructure. More detailed elucidation concerning the enhancement mechanism will provide the possibility of photonic device application, for example as a high‐performance point light source, nanolaser, or sensor for bioimaging in the visible region in the near future.     

Dual plasmonic‐enhanced bulk‐heterojunction solar cell incorporating gold nanoparticles into solution‐processed anode buffer layer and active layer

A dual plasmonic resonance effect on the performance of poly(3‐hexylthiophene) (P3HT):phenyl C61‐butyricacid methyl ester (PC61BM) based polymer solar cells (PSCs) has been demonstrated by selectively incorporating 25 nm colloidal gold nanoparticles (Au NPs) in a solution‐processed molybdenum oxide (MoO₃) anode buffer layer and 5 nm colloidal Au NPs in the active P3HT:PCBM layer. The devices exhibit up to ～20% improvement in power conversion efficiency which is attributed to the dual effect of localized surface plasmon resonance (LSPR) of Au NPs with enhanced light absorption and exciton generation. Our report shows a guideline on the usage of dual LSPR effect for the solution‐processed polymer solar cells to achieve high efficiencies. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Dual Responsive Poly(N‐vinylcaprolactam) Based Degradable Microgels for Drug Delivery

Poly(N‐vinylcaprolactam)‐based biodegradable microgels are prepared for drug delivery application via precipitation polymerization using diacetone acrylamide (DAAM) and dimethyl itaconate (IADME) as comonomers. The microgel particles are subsequently crosslinked by addition of adipic acid dihydrazide, which reacts with the ketone groups of DAAM. Itaconic acid (IA) groups are generated by the hydrolysis of IADME units inside the microgels resulting into both pH and temperature sensitive microgel particles. Volume phase transition temperature of the obtained microgels is influenced by both IA content and pH of the surrounding medium. Due to the incorporation of hydrazone linkages, the microgels show degradation under acidic conditions. These microgels can effectively encapsulate doxorubicin (DOX) as a model drug and show low DOX leakage under physiological conditions while rapid DOX release is observed at low pH. The results of the cytotoxicity assay further display that the DOX‐loaded microgels exhibit effective antitumor activity against HeLa cells demonstrating their great potential as drug delivery carriers for cancer therapy.     

Gold Nanoparticles Stabilized by Single Tripodal Ligands

In order to coat the entire surface of gold nanoparticles (AuNPs) by a single ligand, tripodal macromolecules comprising benzylic thioethers coordinating to the AuNP surface are synthesized and their abilities to stabilize AuNPs are investigated. Out of the five studied ligands 1 – 5 , the tetraphenylmethane‐based oligomers 4 and 5 display excellent AuNP coating features. Both ligand structures are able to control the dimensions of the AuNPs by stabilizing particles of narrow size distributions during their syntheses (1.05 ± 0.28 nm for Au‐4 , and 1.15 ± 0.34 nm for Au‐5 ). Closer inspection of these AuNPs by transmission electron microscopy and thermogravimetric analyses suggests that single ligands 4 and 5 are able to stabilize entire AuNPs. These particles Au‐4 and Au‐5 are obtained in good yields and display promising thermal stabilities (110 °C for Au‐4 , and 95 °C for Au‐5 ), making them interesting nanoscale inorganic–organic building blocks for further functionalization/processing by wet chemistry.     

Au/TiO2 nanorod‐based Schottky‐type UV photodetectors

TiO₂ nanorods (NRs) were synthesized on fluorine‐doped tin oxide (FTO) pre‐coated glass substrates using hydrothermal growth technique. Scanning electron microscopy studies have revealed the formation of vertically‐aligned TiO₂ NRs with length of ～2 µm and diameter of 110–128 nm, homogenously distributed over the substrate surface. 130 nm thick Au contacts using thermal evaporation were deposited on the n‐type TiO₂ NRs at room temperature for the fabrication of NR‐based Schottky‐type UV photodetectors. The fabricated Schottky devices functioned as highly sensitive UV photodetectors with a peak responsivity of 134.8 A/W (λ = 350 nm) measured under 3 V reverse bias. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Copolymer Particles with Incorporated Gold and Silver Nanoparticles to Absorb Short‐Wavelength Scattering in Full‐Color Photonic Glasses

Photonic glasses (PGs) have fascinated researchers because the structural colors that are reflected from PGs are angle independent. However, low color saturation, especially for colors at longer wavelengths, is an obstacle for realizing full‐color PGs. It is reported that the form‐factor‐(FF)‐derived reflections that degrade the color saturation of PGs can be removed by embedding Ag and Au nanoparticles (NPs) into copolymers. Styrene and 4‐vinylpyridne copolymer particles are prepared and used as nanotemplates to synthesize AgNPs and AuNPs. The wavelength of the FF‐derived reflections in relation to the diameter of the particles is estimated. NPs with an absorption spectrum corresponding to the calculated values are then selectively embedded in the copolymer particles. PGs fabricated with AgNP‐ and AuNP‐embedded copolymer particles exhibit fewer FF‐derived reflections owing to the surface‐plasmon‐resonance‐induced absorption of the embedded NPs. Using these FF‐reduced PGs, angle‐independent full‐color PG pigments are realized.     

Photonic‐on‐a‐chip: a thermal actuated Mach‐Zehnder interferometer and a molecular thermometer based on a single di‐ureasil organic‐inorganic hybrid

An integrated photonic‐on‐a‐chip device based on a single organic‐inorganic di‐ureasil hybrid was fabricated for optical waveguide and temperature sensing. The device is composed by a thermal actuated Mach‐Zehnder (MZ) interferometer operating with a switching power of 0.011 W and a maximum temperature difference between branches of 0.89 ºC. The MZ interferometer is covered by a Eu³⁺/Tb³⁺ co‐doped di‐ureasil luminescent molecular thermometer with a temperature uncertainty of 0.1ºC and a spatial resolution of 13 µm. This is an uncommon example in which the same material (an organic‐inorganic hybrid) that is used to fabricate a particular device (a thermal‐actuated MZ interferometer) is also used to measure one of the device intrinsic properties (the operating temperature). The photonic‐on‐a‐chip example discussed here can be applied to sense temperature gradients with high resolution (10⁻³ ºC·µm⁻¹) in chip‐scale heat engines or refrigerators, magnetic nanocontacts and energy‐harvesting machines.     

The Effect of ζ‐Potential and Hydrodynamic Size on Nanoparticle Interactions in Hydrogels

The ζ‐potential and hydrodynamic size (d_h) of nanoparticles (NPs) are systematically controlled by capping gold NPs (AuNPs) with polymers having different charges and treating them in NaCl solutions of diverse concentrations. Interactions between AuNPs in hydrogel are caused by chemical reactions induced by 1,4‐dithiothreitol. The effect of ζ‐potential is clear, as negatively charged AuNPs can be aggregated in neutral agarose gel, but the amount of aggregation is significantly affected by the magnitude of the negative surface charge on the AuNPs. However, all positively charged AuNPs show negligible aggregation in agarose gel with slightly negative polarity. The effect of d_h on AuNP aggregation is different from that of ζ‐potential. Although AuNPs with small d_h generally show more aggregation than those with large d_h, the amount of AuNP capping layer is critical. Thus, the amount of polymer present on NP surface needs to be considered to investigate the effect of d_h on AuNP aggregation. Through extended Derjaguin, Landau, Verwey, Overbeek (XDLVO) theory, it is shown that the charges of the AuNPs and the hydrogel, as well as the d_h of the NPs, are related to electrostatic repulsion and steric hindrance, which affect AuNP aggregation in hydrogel.     

Ultrahigh‐Density Plasmonic‐Nanoparticle‐Sensitized Semiconductor Photocatalysts Profit from Cooperative Light Harvesting and Charge Separation Processes: Experiments,Simulations, and Multifunctional Plasmonics

Here, a controlled synthesis of remarkable 3D photocatalysts is presented that is composed of ultrahigh‐density unaggregated plasmonic Au nanoparticles (AuNPs) chemically bound to vertically aligned ZnO nanorod arrays (ZNA) through bifunctional molecular linkers. Experimental probes and electromagnetic simulations of electron transfer and localized plasmonic coupling processes are exploited to gain insight into the underlying light‐irradiation‐induced interactions in the 3D ZNA–AuNPs photocatalysts. Highly dense AuNPs on ZNA surfaces act as sinks for the storage of UV‐generated electrons, which promote the separation of charge carriers and create numerous photocatalytic reaction centers. Furthermore, 3D finite‐difference time domain simulation indicates that significant visible light confinement and enhancement around the ZNA–AuNPs interfacial plasmon “hot spots” contribute to efficient conversion of light energy to electron‐hole pairs. Significantly, in comparison with the bare ZNA, the 10‐nm‐sized AuNPs‐decorated ZNA exhibits 10.6‐fold enhanced photoreaction rate in the entire UV–vis region. Moreover, various novel hybrid structures based on the plasmonic AuNPs and diverse nanostructures (films, powdered nanorods, mesoporous, and nanotubes) or functional materials (multiferroic BiFeO₃, CuInGaSe₂ absorber layers, and photoactive TiO₂) are successfully constructed using the present synthesis methodology. It may stimulate the progress in materials science toward the synthesis of multifunctional plasmonic heterostructures or devices.     

Assembly of Gold Nanoparticles on Gold Nanorods Using Functionalized Poly(N‐isopropylacrylamide) as Polymeric “Glue”

A telechelic thermoresponsive polymer, α‐amino‐ω‐thiol‐poly(N‐isopropylacrylamide) (H₂N‐PNiPAM‐SH), is used as the polymeric glue to assemble gold nanoparticles (AuNPs) around gold nanorods (AuNRs) into a satellite structure. Prepared by reversible addition‐fragmentation chain transfer polymerization followed by hydrazinolysis, H₂N‐PNiPAM‐SH is able to interlink the two types of the gold building blocks with the thiol‐end grafting on AuNRs and the amine‐end coordinating on the AuNP surface. The density of the grafted AuNPs on AuNRs can be tuned by adjusting the molar ratio between AuNPs and AuNRs in the feed. The resulted satellite‐like assembly exhibits unique optical property that was responsive to temperature change.     

A localized surface plasmon resonance and light confinement‐enhanced near‐infrared light photodetector

Light manipulation is paramountly important to the fabrication of high‐performance optoelectronic devices such as solar cells and photodetectors. In this study, a high‐performance near‐infrared light nanophotodetector (NIRPD) was fabricated based on a germanium nanoneedles array (GeNNs array) with strong light confining capability, and single‐layer graphene (SLG) modified with heavily doped indium tin oxide nanoparticles (ITONPs), which were capable of inducing localized surface plasmon resonance (LSPR) under NIR irradiation. An optoelectronic study shows that after modification with ITONPs the device performance including photocurrent, responsivity and detectivity was considerably improved. In addition, the ITONPs@SLG/GeNNs array NIRPD was able to monitor fast‐switching optical signals, the frequency was as high as 1 MHz, with very fast response rates. Theoretical simulations based on finite‐element method (FEM) revealed that the observed high performance was not only due to the strong light‐confining capability of the GeNNs array, but also due to the plasmonic ITONPs‐induced hot electron injection. The above results suggest that the present NIRPD will have great potential in future optoelectronic devices application.

     

Supramolecules‐Guided Synthesis of Brightly Near‐Infrared Au22 Nanoclusters with Aggregation‐Induced Emission for Bioimaging

Protein‐protected gold nanoclusters with emission in the near‐infrared wavelength range have been widely considered for applications in biomedical fields. However, their quantum yield (QY) remains low, thus limiting their practical applications. Herein, a novel strategy to synthesize bovine serum albumin–encapsulated gold nanoclusters (BSA‐AuNCs) with QY of 23% is developed. Assembled coordination polymers (supramolecules) of Au(I)‐BSA complexes are initially formed because of the intermolecular forces between BSA ligands. The forces are easily controlled by pH level during the reaction, leading to significant change in the photoluminescence of BSA‐AuNCs. By regulating the pH and reaction temperature, Au(0)@Au(I) core‐shell structured BSA‐AuNCs are fabricated in 2 h. Importantly, such AuNCs are in a rigidified state with high Au(I) content in the shell, offering an explanation for their high luminescence character. Further increasing QY to 29% is achieved by confining BSA‐AuNCs into a cationic polymer, poly(allylamine) hydrochloride (AuNCs@PAH). Enhanced cellular uptake and improved sensitivity of AuNCs@PAH to glutathione compared to BSA‐AuNCs is demonstrated. These findings may give insights into the synergistic effect of pH level and reaction temperature on the properties of protein‐encapsulated AuNCs and provide a possible way for up‐scaled fabrication of brighter AuNCs protected by other protein templates.     

Design of Gold Nanoparticles in Dendritic Cell‐Based Vaccines

The design of effective cancer vaccines must be able to activate dendritic cells (DCs) of the innate immune system in order to induce immunity to pathogens and cancer. DCs patrol the body and once they encounter antigens, they orchestrate a complex mechanism of events and signals that can alert the adaptive immune system to action. However, DC‐based vaccines remain a challenge in part because the source and quality of antigens, the DC targeting molecule, type of adjuvant, and delivery vehicle must be optimized to induce a robust immune response. Gold nanoparticles (AuNPs) have now entered clinical trials as carriers due to their ease of functionalization with antigens, adjuvants, and targeting molecules. This progress report discusses how AuNPs can influence DC activation and maturation, as well as their potential impact on T helper (Th) differentiation. Ultimately, successful AuNP‐based DC vaccines are able to induce phagocytosis, activation/maturation, migration, T cell costimulation, and cytokine secretion, which is named AuNP‐induced DC tuning (AuNP‐DC tuning). Although at its infancy, understanding the processes of AuNP‐DC tuning will give a better understanding of how best to engineer AuNPs and will redefine the next generation of DC‐based vaccines.     

Negative‐Imaging of Citrate Layers on Gold Nanoparticles by Ligand‐Templated Metal Deposition: Revealing Surface Heterogeneity

Surface heterogeneity of a metal nanoparticle is typically regarded as boundary defects and various crystalline facets. While organic capping ligands of a single type are assumed to be homogeneously distributed on the nanoparticle surface, heterogeneous surface coverage of citrate molecules on individual facets of gold nanoparticles (AuNPs) is revealed. Pt metallic clusters with 2 nm in diameter, epitaxially grown on the surface of AuNPs by chemical reaction and imaged by high‐resolution transmission electron microscopy, are utilized as negative‐imaging probes for densely packed adlayers where the underneath gold surface may not be accessible for Pt deposition. At pH > 5.0, citrate anions form only a loosely packed layer. At pH 4.5, citrates and citric acids form both loosely packed and densely packed layers that appear phase separated, and the densely packed domain as small as 5 nm × 5 nm is likely composed of fully protonated citric acids. IR spectra indicate that citric acid binds to a surface Au adatom through the oxygen atom of the central hydroxyl group, and similarly, citrate anions bind to Au adatoms through the carboxylate oxygen atom. This study also reveals the role of Au adatom in the adsorption of citrate species on the metallic surface of AuNPs.     

Raman spectroscopy of combinatory anticancer drug release from gold nanoparticles inside a single leukemia cell

Combinatory anticancer drug release from gold nanoparticles (AuNPs) in K562 human myeloid leukemia cells was performed using Raman spectroscopy. We fabricated the anticancer drug of imatinib as a BCR‐ABL tyrosine kinase inhibitor on AuNP surfaces along with a transferrin (Tf)‐targeting moiety to treat the leukemia cells. DNA topoisomerase I inhibitor topotecan was also assembled to monitor its fluorescence onto AuNPs. The linker group of 4‐carboxylic benzoic acid was used to conjugate to targeting the Tf protein. Our Raman data indicated that the drug molecules were not detached in the cell culture media but released after treatment with glutathione (2 mM). Intracellular distribution and release of the anticancer drug–AuNP conjugates in K562 cells were examined by both fluorescence microscopy and dark‐field microscopy with surface‐enhanced Raman scattering. Copyright © 2013 John Wiley & Sons, Ltd.     

Steric hindrance in cationic and neutral rhodamine 6 G molecules adsorbed on Au nanoparticles

The adsorption of cationic and neutral R6G molecules on Au nanoparticles was elucidated by surface enhanced Raman scattering (SERS). The steric hindrance at hydroethyl amino (‐N(H)Et) groups in R6G was evidenced by the observation that R6G⁺ adsorb on as‐prepared gold nanoparticles (AuNPs) only with electrostatic forces, in contrast to the electrostatic and chemical adsorption of R123⁺ with dihydro amino (‐NH₂) groups on as‐prepared AuNPs. Large steric hindrance at the amino groups in R6G yielded saturated coverage of 700 molecules/AuNP for R6G⁺ significantly fewer than 1000 molecules/AuNP for R123⁺. In addition, neutral R6G⁰ on AuNPs showed markedly enhanced peaks at 1200–1600 cm⁻¹, which were not observed in Raman spectra of R6G⁰ in bulk solution, and also in SERS of R6G⁺ on AuNPs. These bands are attributed to vibrational modes of an outer phenyl ring and ethyl amino groups, which are vertical to a xanthene plane, on the basis of theoretical analysis of molecular vibrations. Thus, Raman scattering of these bands is enhanced under an inclined orientation of R6G⁰ molecules chemisorbed on AuNPs via lone pair electrons at amino groups. Copyright © 2013 John Wiley & Sons, Ltd.     

Fabrication of three‐dimensional photonic crystals in quantum‐dot‐based materials

Controlling spontaneous emission (SE) is of fundamental importance to a diverse range of photonic applications including but not limited to quantum optics, low power displays, solar energy harvesting and optical communications. Characterized by photonic bandgap (PBG) property, three‐dimensional (3D) photonic crystals (PCs) have emerged as a promising synthetic material, which can manipulate photons in much the same way as a semiconductor does to electrons. Emission tunable nanocrystal quantum dots (QDs) are ideal point sources to be embedded into 3D PCs towards active devices. The challenge however lies in the combination of QDs with 3D PCs without degradation of their emission properties. Polymer materials stand out for this purpose due to their flexibility of incorporating active materials. Combining the versatile multi‐photon 3D micro‐fabrication techniques, active 3D PCs have been fabricated in polymer‐QD composites with demonstrated control of SE from QDs. With this milestone novel miniaturized photonic devices can thus be envisaged.     

Direct Synthesis of Gold Nanoparticle‐Over‐Nanosheet for Sensitive SERS Detection

A simple ethanol sol‐based method for the synthesis of gold nanosheets (AuNSs) and gold nanoparticle‐over‐nanosheet (AuNP/NS) is developed. Gold nanoparticles (AuNPs) with average sizes of ≈8 nm are grown in situ on the surface of the AuNS, which forms a NP/NS structure that obtains strong, significantly improved, surface‐enhanced Raman spectroscopy activity with the magnitude ≈2 and ≈6 orders higher than the simplex AuNP and AuNS, respectively. This performance is mainly attributed to uniform AuNPs that are closely packed over AuNS and coupled with NP–NS and NP–NP interactions. The NP–NS–GP (the gap between NP–NS) is narrower than NP–NP–GP in which much stronger and steadier plasmon resonance is obtained that can significantly enhance the Raman signal. The results show that single‐crystalline AuNS is an ideal substrate, which can be further coated with other metallic NPs to form a new flexible, high‐activity and AuNS‐based nanocomposite for a wide variety of applications.     

Comparing the Contribution of Visible‐Light Irradiation,Gold Nanoparticles,and Titania Supports in Photocatalytic Nitroaromatic Coupling and Aromatic Alcohol Oxidation

Under visible‐light irradiation, gold nanoparticles (Au NPs) supported by titania (TiO₂) nanofibers show excellent activity and high selectivity for both reductive coupling of nitroaromatics to corresponding azobenzene or azoxylbenzene and selective oxidation of aromatic alcohols to corresponding aldehydes. The Au NPs act as active centers mainly due to their localized surface plasmon resonance (LSPR) effect. They can effectively couple the photonic energy and thermal energy to enhance reaction efficiency. Visible‐light irradiation has more influence on the reduction than on the oxidation, lowering the activation energy by 24.7 kJ mol^?1 and increasing the conversion rate by 88% for the reductive coupling, compared to merely 8.7 kJ mol^?1 and 46% for the oxidation. Furthermore, it is found that the conversion of nitroaromatics significantly depends on the particle size and specific surface area of supported Au NPs; and the catalyst on TiO₂(B) support outperforms that on anatase phase with preferable ability to activate oxygen. In contrast, for the selective oxidation, the effect of surface area is less prominent and Au NPs on anatase exhibit higher photo‐catalytic activity than other TiO₂ phases. The catalysts can be recovered efficiently because the Au NPs stably attach to TiO₂ supports by forming a well‐matched coherent interface observed via high‐resolution TEM.     

金银三层纳米管局域表面等离激元共振特性研究

相对于单一金属纳米材料,二金属复合纳米材料具有更大的潜在应用价值.基于时域有限差分方法,研究了SiO₂-Ag-Au和SiO₂-Au-Ag二金属三层纳米管的消光光谱,并对其局域表面等离激元共振(Localized Surface Plasmon Resonance,LSPR)特性进行了分析.研究发现,内核尺寸变大将导致上述两种金属纳米管LSPR峰红移;内层金属及外层金属壳层厚度增大均会导致其LSPR峰蓝移.银壳厚度变化对纳米管LSPR的调制作用大于金壳厚度变化造成的影响.上述现象可以利用等离激元杂化理论及自由电子和振荡电子变化的竞争机制进行分析.