The role of nucleation field of media in heat-assisted magnetic probe recording

We characterize a method of heat-assisted magnetic probe recording on perpendicular media. Heating source is field emission current from a scanning tunneling microscope (STM) tip. Recording media are three kinds of magnetic films, Co/Pt, CoNi/Pt, and Co/Pd multilayers with different nucleation fields. Pulses with amplitude of 5 V were applied between the STM tip and the recording medium. Experiments show that magnetic marks with an average size of 180 nm were formed on both Co/Pt and CoNi/Pt films whose nucleation fields are greater than their saturation magnetization. No marks were observed on the Co/Pd film whose nucleation field is smaller than its saturation magnetization. A model is built to simulate the dynamic process of domain formation in probe-based magnetic recording system. Simulation results agree with experiments and it explains the effect of the nucleation field of medium in perpendicular recording.     

Colloidal Flower‐Shaped Iron Oxide Nanoparticles: Synthesis Strategies and Coatings

The assembly of magnetic cores into regular structures may notably influence the properties displayed by a magnetic colloid. Here, key synthesis parameters driving the self‐assembly process capable of organizing colloidal magnetic cores into highly regular and reproducible multi‐core nanoparticles are determined. In addition, a self‐consistent picture that explains the collective magnetic properties exhibited by these complex assemblies is achieved through structural, colloidal, and magnetic means. For this purpose, different strategies to obtain flower‐shaped iron oxide assemblies in the size range 25–100 nm are examined. The routes are based on the partial oxidation of Fe(OH)₂, polyol‐mediated synthesis or the reduction of iron acetylacetonate. The nanoparticles are functionalized either with dextran, citric acid, or alternatively embedded in polystyrene and their long‐term stability is assessed. The core size is measured, calculated, and modeled using both structural and magnetic means, while the Debye model and multi‐core extended model are used to study interparticle interactions. This is the first step toward standardized protocols of synthesis and characterization of flower‐shaped nanoparticles.     

Functionalized Magnetite Nanoparticles—Synthesis,Properties, and Bio-Applications

Nanotechnology has generated tremendous hopes in recent years toward the design of advanced functional materials, especially in the bio-medical field. Nano-sized-materials such as magnetite nanoparticles display indeed fascinating physico-chemical properties that, if tuned properly, can be exploited to design new bio-diagnostic and therapeutic strategies as well as innovative biotechnology methodologies. Owing to their biocompatibility and excellent magnetic properties, magnetite nanocrystals have been the object of a tremendous amount of research in the last decade and numerous (bio)applications have been reported. Importantly, advances in the synthesis of magnetite nanoparticles enable excellent control over their size, shape, and composition. Despite these remarkable progresses, many issues remain to be overcome for these nanotechnology products to revolution the medical practice. The fine control and application of colloidal nanostructures such as magnetite nanoparticles in complex biological systems remains especially challenging. This article attempts to review the current status of magnetite nanoparticles preparation and use, with a special emphasis on bio-medical applications, but also to outline the promises and challenges associated to this emerging technology.     

Janus Multicolored Photonic Crystal Beads for Real‐Time Magnetic Responsive Patterns

Photonic Janus particles that can change colors in different stimuli have shown great promise in various applications, such as optical probes, catalyst supports, sensors, and display materials. However, it remains a challenge to produce Janus structural colored particles with a simple method. Inspired from ecsenius bicolors, a facile preparation of Janus structural colored beads (JSCBs) using sub‐micrometer‐sized colloidal particles and magnetic nanoparticles composed of Fe₃O₄ is established. A mixed emulsion is prepared by monodispersed colloidal particles and magnetic nanoparticles and initiator of PDMS precursor. Subsequent self‐assembly of the emulsion in the room temperature environment provides two different structural colors, thanks to the gravity deposition of colloidal particles and Fe₃O₄ nanoparticles. The photonic bandgap of JSCBs can be precisely controlled with varying size of monodispersed colloidal nanoparticles, and the high optical quality and mechanical strength of the structural colored face are attributed to the existence of PDMS. In the presence of a magnet, the JSCBs can change their orientation simultaneously between two different structural colors. Moreover, the JSCBs are capable of encoding and angle‐independent displaying, which are crucial to their applications in anticounterfeiting, information coding, and pattern display.     

Noble Metal Clusters: Applications in Energy,Environment, and Biology

Sub‐nanometer‐sized metal clusters, having dimensions between metal atoms and nanoparticles, have attracted tremendous attention in the recent past due to their unique physical and chemical properties. As properties of such materials depend strongly on size, development of synthetic routes that allows precise tuning of the cluster cores with high monodispersity and purity is an area of intense research. Such materials are also interesting owing to their wide variety of applications. Novel sensing strategies based on these materials are emerging. Owing to their extremely small size, low toxicity, and biocompatibility, they are widely studied for biomedical applications. Primary focus of this review is to provide an account of the recent advances in their applications in areas such as environment, energy, and biology. With further experimental and theoretical advances aimed at understanding their novel properties and solving challenges in their synthesis, an almost unlimited field of applications can be foreseen.     

HoF3 and DyF3 Nanoparticles as Contrast Agents for High‐Field Magnetic Resonance Imaging

Clinical contrast agents (CAs) currently used in magnetic resonance imaging (MRI) at low fields are less effective at high magnetic fields. The development of new CAs is mandatory to improve diagnostic capabilities of the new generation of high field MRI scanners. The purpose of this study is to synthesize uniform, water dispersible LnF₃ (Ln = Ho, Dy) nanoparticles (NPs) and to evaluate their relaxivity at high magnetic field (9.4 T) as a function of size and composition. Two different types of HoF₃ NPs are obtained by homogeneous precipitation in ethylene glycol at 120 °C. The use of holmium acetate as holmium precursor leads to rhombus‐like nanoparticles, while smaller, ellipsoid‐like nanoparticles are obtained when nitrate is used as the holmium salt. To explain this behavior, the mechanism of formation of both kinds of particles is analyzed in detail. Likewise, rhombus‐like DyF₃ nanoparticles are prepared following the same method as for the rhombus‐like HoF₃ nanoparticles. We have found, to the best of knowledge, the highest transverse relaxivity values at 9.4 T described in the literature for this kind of CAs. Finally, the LnF₃ NPs have shown negligible cytotoxicity for C6 rat glioma cells for concentrations up to 0.1 mg mL^?1.     

Enhanced Fluorescence Emission and Magnetic Alignment Control of Biphasic Functionalized Composite Janus Particles

Janus particles, particles that have two distinct aspects on their surface or interiors, have attracted much attention due to their potential for application. For the application of Janus particles to high‐resolution displays, and as light sources for optical circuits and fluorescent probes, the Janus particles should be nanosize to ensure high‐resolution display and analysis, responsive to external stimuli, and highly fluorescent. However, it is still a challenging issue to develop such highly fluorescent nanoscale Janus particles and control their alignment. Magnetoresponsive Janus particles, of which the orientation can be controlled by an external magnetic field, are prepared by the simple introduction of polymer‐coated magnetic nanoparticles (NPs) into the hemispheres of Janus particles. If these magnetoresponsive Janus particles can be combined with a strong fluorescence system, then they could be ideal candidates as components of the previously mentioned applications. In the present study, Janus particles are prepared with a fluorescent dye and gold nanoparticles (Au NPs) on one side. The optical properties of the resulting particles are assessed and discussed. Furthermore, the response of composite Janus particles containing dyes, Au NPs, and iron oxide NPs to an external magnetic field is discussed.     

Internal Structure and Magnetic Properties in Cobalt Ferrite Nanoparticles: Influence of the Synthesis Method

The design of novel nanostructured magnetic materials requires a good understanding of the variation in the magnetic properties due to different synthesis conditions. In this work, four different procedures for fabricating Co‐ferrite nanoparticles with similar sizes between 7 and 10 nm are compared by studying their structural and magnetic properties. Non‐aqueous methods based on the thermal decomposition of metal acetylacetonates at high temperatures, either with or without surfactants, provide highly crystalline nanoparticles with large saturation magnetization values and a coherent reversal of the magnetic moment. However, variations in the density of defects and in the shape of the nanocrystals determine the distribution of switching fields and the effective magnetic anisotropy, which reaches up to ≈1 × 10⁷ erg cm^?3 for oleic acid‐capped 9 nm nanoparticles. It is shown that the saturation magnetization values for nanoparticles produced by different methods are in the range between 49 and 95 emu g^?1 due to differences in the stoichiometry, in the cation occupancy, in the magnetic disorder and in the spin canting of the magnetic sub‐lattices, the latter evaluated by in‐field Mössbauer spectroscopy.     

State‐of‐the‐Art and Trends in Synthesis,Properties, and Application of Quantum Dots‐Based Nanomaterials

Quantum dots (QDs) with a nanoscale size range have attracted significant attention in various areas of nanotechnology due to their unique properties. Different strategies for the synthesis of QD nanoparticles are reported in which various factors, such as size, impurities, shape, and crystallinity, affect the QDs fundamental properties. Consequently, to obtain QDs with appropriate physical properties, it is required to select a synthesis method which allows enough control over the surface chemistry of QDs through fine‐tuning of the synthesis parameters. Moreover, QDs nanocrystals are recently used in multidisciplinary research integrated with biological interfaces. The state‐of‐the‐art methods for synthesizing QDs and bioconjugation strategies to provide insight into various applications of these nanomaterials are discussed herein.     

Synthesis,characterization and a.c. magnetic analysis of magnetite nanoparticles

In the last years, the study of Fe-based magnetic nanoparticles (MNP) has attracted increasing interest either for the physical properties shown by nanosized materials (electric and magnetic properties are strongly affected by dimension and surface effects) either for the different technological applications of these materials (catalysis, drug delivery, magnetic resonance imaging, contaminants removal from groundwater, new exchange coupled magnets, soft nanomagnets for high frequency applications, etc.). In this article, the results obtained in the synthesis and characterization of the Fe₃O₄ MNP is reported. The magnetite nanoparticles were synthesized by a modified Massart method. Structural characterization was performed using X-ray diffraction analysis and a complete morphological and dimensional study was carried out by means of Transmission Electron Microscopy, and a.c. magnetic susceptibility measured as a function of the frequency of the applied magnetic field. Diameters of the superparamagnetic Fe₃O₄ nanoparticles are ranging from 2 to 10 nm, as evidenced by all the techniques employed. The size distribution of the hydrated aggregates in solution has been obtained by quantitative analysis of the frequency dependence of the a.c. susceptibility. The mathematical approach adopted will be described and all the obtained results will be compared and discussed.     

Amphiphilic Core–Shell Nanocomposite Particles for Enhanced Magnetic Resonance Imaging

A scalable synthesis of magnetic core–shell nanocomposite particles, acting as a novel class of magnetic resonance (MR) contrast agents, has been developed. Each nanocomposite particle consists of a biocompatible chitosan shell and a poly(methyl methacrylate) (PMMA) core where multiple aggregated γ‐Fe₂O₃ nanoparticles are confined within the hydrophobic core. Properties of the nanocomposite particles including their chemical structure, particle size, size distribution, and morphology, as well as crystallinity of the magnetic nanoparticles and magnetic properties were systematically characterized. Their potential application as an MR contrast agent has been evaluated. Results show that the nanocomposite particles have good stability in biological media and very low cytotoxicity in both L929 mouse fibroblasts (normal cells) and HeLa cells (cervical cancer cells). They also exhibited excellent MR imaging performance with a T₂ relaxivity of up to 364 mM_Fe^?1 s^?1. An in vivo MR test performed on a naked mouse bearing breast tumor indicates that the nanocomposite particles can localize in both normal liver and tumor tissues. These results suggest that the magnetic core–shell nanocomposite particles are an efficient, inexpensive and safe T₂‐weighted MR contrast agent for both liver and tumor MR imaging in cancer therapy.     

Second harmonic magnetoacoustic responses of magnetic nanoparticles in magnetoacoustic tomography with magnetic induction

Due to the unique magnetic, mechanical and thermal properties, magnetic nanoparticles(MNPs) have comprehensive applications as the contrast and therapeutic agents in biomedical imaging and magnetic hyperthermia. The linear and nonlinear magnetoacoustic responses determined by the magnetic properties of MNPs have attracted more and more attention in biomedical engineering. By considering the relaxation time of MNPs, we derive the formulae of second harmonic magnetoacoustic responses(2H-MARs) for a cylindrical MNP solution model based on the mechanical oscillations of MNPs in magnetoacoustic tomography with magnetic induction(MAT-MI). It is proved that only the second harmonic magnetoacoustic oscillations can be generated by MNPs under an alternating magnetic excitation. The acoustic pressure of the 2H-MAR is proportional to the square of the magnetic field intensity and exhibits a linear increase with the concentration of MNPs. Numerical simulations of the 2H-MAR are confirmed by the experimental measurements for various magnetic field intensities and solution concentrations using a laser vibrometer. The favorable results demonstrate the feasibility of the harmonic measurements without the fundamental interference of the electromagnetic excitation, and suggest a new harmonic imaging strategy of MAT-MI for MNPs with enhanced spatial resolution and improved signal-to-noise ratio in biomedical applications.     

优化磁共振纳米医学中磁性纳米粒子的热疗效率

磁共振热疗(magnetic resonance hyperthermia)是近年来新兴的一种纳米医学治疗方法,由磁共振的硬件架构产生特定交变磁场,有效地加热磁性纳米粒子,以直接或间接地杀死癌细胞,体现诊疗一体化。提高磁性纳米粒子的加热效率是当前磁共振热疗领域亟待解决的难题之一。磁性纳米粒子的加热效率不仅与粒子本身的大小、性质以及尺寸分布有关,还和聚集状态有关。该研究利用3D Metropolis蒙特卡罗模拟方法,模拟了不同温度下磁性纳米粒子的磁共振热动力学行为及其团聚与分离现象;并通过修正过的郎之万方程,建立了相变临界温度与外加磁场频率的函数关系。模拟结果显示,磁性纳米粒子悬浮液中多聚体的相对含量随着温度的升高而降低,达到临界温度后,多聚体完全分离成单体;而提高交变磁场频率可以显著降低临界温度,且存在临界频率,高于此临界频率后临界温度不再受外加磁场频率影响,达到稳定。因而在临界频率下预热磁性纳米粒子悬浮液,使得多聚体分离成单体,可优化磁性纳米粒子的热疗效率。     

Synthesis and Reactivity of Magnetically Diverse Au@Ni Core–Shell Nanostructures

Core–shell bimetallic Au@Ni nanoparticles, with gold cores and thin nickel shells with overall size less than 10 nm, are synthesized and stabilized in pure cubic (fcc) and hexagonal (hcp) phase. Due to their unique crystal, electronic, and geometric structure, they show interesting magnetic and chemical properties. The Au@Ni_fcc is magnetic, whereas Au@Ni_hcp is non‐magnetic. Both the bimetallic nanostructures are stable to surface oxidation until 150 °C and show excellent catalytic activity for p‐nitrophenol reduction reaction.     

Structural,magnetic and XPS studies of Sn0.95Co0.05O2-0.05 and Sn0.95Fe0.05O2-0.05 nanoparticles

Structural, microstructural, X-ray photoemission spectra (XPS) and magnetic properties of transition metal ion [5 mol% of Co (SC5) and Fe (SF5)]-doped SnO₂ nanoparticles have been studied. The SC5 and SF5 nanoparticles were synthesized by a chemical route using polyvinyl alcohol as surfactant. The doped SnO₂ crystallites were found to exhibit a tetragonal rutile structure and the average grains size was measured by the Scherer relation of X-ray diffraction. Transmission electron micrographs showed that the average grain size of SC5 is smaller than SF5. SC5 nanoparticles showed strong ferromagnetic behaviour but SF5 exhibited an F-centre exchange (FCE) mechanism. Temperature-dependent magnetization showed the values of phase transition temperature. XPS confirmed the presence of Sn–O–Co and Sn–O–Fe bonds in these SC5 and SF5 nanoparticles. The oxidation states of Sn, Co and Fe were found to be +4, +2 and +2, respectively, while the core level XPS peaks of Sn 3d, O 1s, Co 2p and Fe 2p were analyzed.     

多层膜磁性微泡的非线性声振动特性

超顺磁性氧化铁纳米粒子与造影剂微泡结合形成磁性微泡,用于产生多模态造影剂,以增强医学超声和磁共振成像.将装载有纳米磁性颗粒的微泡包膜层看作由磁流体膜与磷脂膜组合而成的双层膜结构,同时考虑磁性纳米颗粒体积分数a对膜密度及黏度的影响,从气泡动力学基本理论出发,构建多层膜结构磁性微泡非线性动力学方程.数值分析了驱动声压和频率等声场参数、颗粒体积分数、膜层厚度以及表面张力等膜壳参数对微泡声动力学行为的影响.结果表明,当磁性颗粒体积分数较小且a≤0.1时,磁性微泡声响应特性与普通包膜微泡相似,微泡的声频响应与其初始尺寸和驱动压有关;当驱动声场频率f为磁性微泡共振频率f0的2倍(f=2f0)时,微泡振动失稳临界声压最低;磁性颗粒的存在抑制了泡的膨胀和收缩但抑制效果非常有限;磁性微泡外膜层材料的表面张力参数K及膜层厚度d也会影响微泡的振动,当表面张力参数及膜厚取值分别为0.2—0.4 N/m及50—150 nm时,可观察到气泡存在不稳定振动响应区.     

Graphene Quantum Dots

Graphene quantum dots (GQDs) are nanometer‐sized fragments of graphene that show unique properties, which makes them interesting candidates for a whole range of new applications. This review article gives an overview of the synthesis, properties and applications of GQDs. Synthesis methods discussed include top‐down and bottom‐up approaches. Properties such as luminescence up‐ and down‐conversion have been used in applications ranging from energy conversion to bio‐analytics. This article provides an overview of the state‐of‐the‐art and highlights promising findings as well as potential future directions of the research field.     

Imaging the Magnetic Reversal of Isolated and Organized Molecular‐Based Nanoparticles using Magnetic Force Microscopy

In the race towards miniaturization in nanoelectronics, magnetic nanoparticles (MNPs) have emerged as potential candidates for their integration in ultrahigh‐density recording media. Molecular‐based materials open the possibility to design new tailor‐made MNPs with variable composition and sizes, which benefit from the intrinsic properties of these materials. Before their implementation in real devices is reached, a precise organization on surfaces and a reliable characterization and manipulation of their individual magnetic behavior are required. In this paper, it is demonstrated how molecular‐based MNPs are accurately organized on surfaces and how the magnetic properties of the individual MNPs are detected and tuned by means of low‐temperature magnetic force microscopy (LT‐MFM) with variable magnetic field. The magnetization reversal on isolated and organized MNPs is investigated; in addition, the temperature dependence of their magnetic response is evaluated.     

Magnetic behavior of nanocrystalline CoFe2O4

Magnetic nanoparticles of CoFe₂O₄ have been synthesized under an applied magnetic field through a co-precipitation method followed by thermal treatments at different temperatures, producing nanoparticles of varying size. The magnetic behavior of these nanoparticles was investigated. As-grown nanoparticles demonstrate superparamagnetism above the blocking temperature, which is dependent on the particle size. One of the nanoparticles demonstrated a constricted magnetic hysteresis loop with no or small coercivity and remanence at low magnetic field. However, the loop opens up at high magnetic field. This magnetic behavior is attributed to the preferred Co ions and vacancies arrangements when the CoFe₂O₄ nanoparticles were synthesized under an applied magnetic field. Furthermore, this magnetic property is strongly dependent on the high temperature heat treatments that produce Co ions and vacancies disorder.     

Dextran‐Coated Antiferromagnetic MnO Nanoparticles for a T1‐MRI Contrast Agent with High Colloidal Stability

A simple approach to synthesize carboxymethyl dextran‐coated MnO nanoparticles (CMDex‐MnONPs) with high colloidal stability in physiological saline solutions is described here for potential applications as a magnetic resonance imaging (MRI) T₁ contrast agent. The thermal decomposition methodology is used to produce uniform MnONPs with an average size of around 20 nm, and its hydrophobic surface is modified with CMDex molecules, conferring hydrophilic properties. After CMDex coating, the nanoparticle presents high colloidal stability in concentrations ranging from 10 to 50 μg mL^?1, average hydrodynamic size (Z‐average) of 130 nm, polydispersity degree of ≈12%, and negative surface charge in both simulated body fluid solutions and pure water with zeta‐potential of –20 and –40 mV, respectively. The CMDex‐MnONPs with 20 nm show antiferromagnetic behavior at room temperature, and the magnetic properties are found to be strongly dependent of the nanoparticle size, increasing the contribution of the ferromagnetic Mn₃O₄ phase with decreasing size for nanoparticles about 3 nm. Cytotoxicity evaluation in cancerous and noncancerous cells in the range of 5.0–50.0 μg mL^?1 shows low toxicity for cancerous cells and lack of the same for healthy cells lines. Related to the magnetic properties, CMDex‐MnONP presents significant r₁ relaxivity and low r₂/r₁ relaxivity ratio. The results suggest that these nanoparticles display characteristics for potential applications as an MRI T₁ contrast agent.