Novel Flower‐Like Ag‐SiO2‐MgO‐Al2O3 Material: Preparation,Characterization and Catalytic Application in Methanol Dehydrogenation

Catalytic direct dehydrogenation of methanol to formaldehyde was carried out over Ag‐SiO₂‐MgO‐Al₂O₃ catalysts prepared by sol‐gel method. The optimal preparation mass fractions were determined as 8.3% MgO, 16.5% Al₂O₃ and 20% silver loading. Using this optimum catalyst, excellent activity and selectivity were obtained. The conversion of methanol and the selectivity to formaldehyde both reached 100%, which were much higher than other previously reported silver supported catalysts. Based on combined characterizations, such as X‐ray diffraction (XRD), scanning electronic microscopy (SEM), diffuse reflectance ultraviolet‐visible spectroscopy (UV‐Vis, DRS), nitrogen adsorption at low temperature, temperature programmed desorption of ammonia (NH₃‐TPD), desorption of CO₂ (CO₂‐TPD), etc., the correlation of the catalytic performance to the structural properties of the Ag‐SiO₂‐ MgO‐Al₂O₃ catalyst was discussed in detail. This perfect catalytic performance in the direct dehydrogenation of methanol to formaldehyde without any side‐products is attributed to its unique flower‐like structure with a surface area less than 1 m²/g, and the strong interactions between neutralized support and the nano‐sized Ag particles as active centers.     

Vapor‐Phase Aldolization of n‐Butyraldehyde to 2‐Ethyl‐2‐Hexenal over Solid‐Base Catalysts

Vapor‐phase aldol condensation of n‐butyraldehyde to 2‐ethyl‐2‐hexenal was studied at 1 atm and 150～ 300°C in a fixed‐bed, integral‐flow reactor by using NaX, KX, γ‐Al₂O₃ and Na/NaOH/γ‐Al₂CO₃ catalysts. Ion exchange of NaX zeolite with potassium acetate solution results in a decrease of crystallinity and apparent lowering of surface area, whereas the basic strength is enhanced. Treatment of γ‐Al₂O₃ with NaOH and Na causes a large decrease of the surface area but strong enhancement of the catalyst basicity. The catalytic activity on the basis of unit surface area is in the order Na/NaOH/γ‐Al₂O₃ < KXU < KXW < NaX >γ‐Al₂O₃, in accordance with the relative catalyst basic strength. The molar ratio of trimeric to dimeric products increases with increasing the reaction temperature and the catalyst basic strength except for Na/NaOH/γ‐Al₂O₃. Very high selectivity of 2‐ethyl‐2‐hexenal (>98.5%) was observed for reactions over NaX zeolite at 150°C. Based on the FT‐IR and the catalytic results, the reaction paths are proposed as follows: self‐aldol condensation of n‐butyraldehyde, followed by dehydration produces 2‐ethyl‐2‐hexenal, which then reacts with n‐butyraldehyde and successively dehydrates to 2,4‐diethyl‐2,4‐octadienal and 1,3,5‐triethylbenzene. For the reaction over NaX, the calculated Arrhenius frequency factor and activation energy are 314 mol/g·h and 32.6 kJ/mol, respectively.     

Continuous Dehydrogenation of n‐Pentanol over a Cr Modified Cu/γ‐Al2O3‐La2O3 Catalyst

The oxidant‐free dehydrogenation of n‐pentanol over copper based catalysts was investigated in this paper. The effect of metal modification on the activity and stability of the copper catalyst supported on γ‐Al₂O₃ and La₂O₃ (Cu/γ‐Al₂O₃‐La₂O₃) was clarified and a Cr modified Cu/Al₂O₃‐La₂O₃ (Cu‐Cr/γ‐Al₂O₃‐La₂O₃) showed the best catalytic performance. The conversion of n‐pentanol was 70.0% and the selectivity for n‐pentanal increased to 97.1% over Cu‐Cr/γ‐Al₂O₃‐La₂O₃. X‐ray diffraction and temperature programmed reduction of H₂ indicated that the addition of Cr favors the formation and reduction of the copper oxide, and the dispersion of the active Cu⁰ species, accounting for the good activity and stability of this catalyst. Furthermore, the lower amount of acidic sites in Cu‐Cr/γ‐Al₂O₃‐La₂O₃ is suggested to suppress the dehydration in oxidant‐free dehydrogenation of n‐pentanol, accounting for the higher selectivity for n‐pentanal.     

Synthesis,characterization and catalytic performance of core‐shell structure magnetic Fe3O4/P(GMA‐EGDMA)‐NH2/HPG‐COOH‐Pd catalyst

A strategy has been developed for the synthesis, characterization and catalysis of magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd core‐shell structure supported catalyst. The P(GMA‐EGDMA) polymer layer was coated on the surface of hollow magnetic Fe₃O₄ microspheres through the effect of KH570. The core‐shell magnetic Fe₃O₄/P(GMA‐EGDMA) modified by ‐NH₂ could be grafted with HPG. Then, the hyperbranched glycidyl (HPG) with terminal ‐OH were modified by ‐COOH and adsorbed Pd nanoparticles. The hyperbranched polymer layer not only protected the Fe₃O₄ magnetic core from acid–base substrate corrosion, but also provided a number of functional groups as binding sites for Pd nanoparticles. The prepared catalyst was characterized by UV–vis, TEM, SEM, FTIR, TGA, ICP‐OES, BET, XRD, DLS and VSM. The catalytic tests showed that the magnetic Fe₃O₄/P(GMA‐EGDMA)‐NH₂/HPG‐COOH‐Pd catalyst had excellent catalytic performance and retained 86% catalytic efficiency after 8 consecutive cycles.     

Characterization and Activity of Cu‐MnOx/γ‐Al2O3 Catalyst for Hydrogenation of Carbon Dioxide

The effect of manganese on the dispersion, reduction behavior and active states of surface of supported copper oxide catalysts have been investigated by XRD, temperature‐programmed reduction and XPS. The activity of methanol synthesis from CO₂/H₂ was also investigated. The catalytic activity over CuO‐MnO_x/γ‐Al₂O₃ catalyst for CO₂ hydrogenation is higher than that of CuO/γ‐Al₂O₃. The adding of manganese is beneficial in enhancing the dispersion of the supported copper oxide and make the TPR peak of the CuO‐MnK_x/γ‐Al₂O₃ catalyst different from the individual supported copper and manganese oxide catalysts, which indicates that there exists strong interaction between the copper and manganese oxide. For the CuO/γ‐Al₂O₃ catalyst there are two reducible copper oxide species; α and β peaks are attributed to the reduction of highly dispersed copper oxide species and bulk CuO species, respectively. For the CuO‐MnO_x/γ‐Al₂O₃ catalyst, four reduction peaks are observed, α peak is attributed to the dispersed copper oxide species; β peak is ascribed to the bulk CuO; γ peak is attributed to the reduction of high dispersed CuO interacting with manganese; δ peak may be the reduction of the manganese oxide interacting with copper oxide. XPS results show that Cu⁺ mostly existed on the working surface of the Cu‐Mn/γ‐Al₂O₃ catalysts. The activity was promoted by Cu with positive charge which was formed by means of long path exchange function between Cu? O? Mn. These results indicate that there is synergistic interaction between the copper and manganese oxide, which is responsible for the high activity of CO₂ hydrogenation.     

Preparation of novel palladium nanoparticles supported on magnetic iron oxide and their catalytic application in the synthesis of 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols

Novel Pd nanoparticles were prepared in five successive stages: 1) preparation of the Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs), 2) coating of Fe₃O₄ MNPs with SiO₂ (Fe₃O₄@SiO₂), 3) functionalization of Fe₃O₄@SiO₂ with 3‐chloropropyltrimethoxy‐ silane (CPTMS) ligand (Fe₃O₄@SiO₂@CPTMS), 4) further functionalization with 3,5‐diamino‐1,2,4‐triazole (DAT) ligand (Fe₃O₄@SiO₂@CPTMS @DAT), and 5) the complexation of Fe₃O₄@SiO₂@CPTMS@DAT with PdCl₂ (Fe₃O₄@SiO₂@CPTMS@ DAT@Pd). Then, the obtained Pd nano‐catalyst characterized by different methods such as the elemental analysis (CHN), FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA and VSM. Finally, the Pd catalyst was applied for the synthesis of various 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols.     

Production of 5‐Hydroxymethylfurfural from Fructose in Ionic Liquid Efficiently Catalyzed by Cr(III)‐Al2O3 Catalyst

A series of metal‐Al₂O₃ catalysts were prepared simply by the conventional impregnation with Al₂O₃ and metal chlorides, which were applied to the dehydration of fructose to 5‐hydroxymethylfurfural (HMF). An agreeable HMF yield of 93.1% was achieved from fructose at mild conditions (100°C and 40 min) when employing Cr(III)‐Al₂O₃ as catalyst in 1‐butyl‐3‐methylimidazolium chloride ([Bmim]Cl). The Cr(III)‐Al₂O₃ catalyst was characterized via XRD, DRS and Raman spectra and the results clarified the interaction between the Cr(III) and the alumina support. Meanwhile, the reaction solvents ([Bmim]Cl) collected after 1^st reaction run and 5^th reaction run were analyzed by ICP‐OES and LC‐ITMS and the results confirmed that no Cr(III) ion was dropped off from the alumina support during the fructose dehydration. Notably, Cr(III)‐Al₂O₃ catalyst had an excellent catalytic performance for glucose and sucrose and the HMF yields were reached to 73.7% and 84.1% at 120°C for 60 min, respectively. Furthermore, the system of Cr(III)‐Al₂O₃ and [Bmim]Cl exhibited a constant stability and activity at 100°C for 40 min and a favorable HMF yield was maintained after ten recycles.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

A new nano‐Fe3O4‐supported organocatalyst based on 3,4‐dihydroxypyridine: an efficient heterogeneous nanocatalyst for one‐pot synthesis of pyrazolo[3,4‐b]pyridines and pyrano[2,3‐d]pyrimidines

A simple and practical strategy for the synthesis of a novel nano‐Fe₃O₄‐supported organocatalyst system based on 3,4‐dihydroxypyridine (Fe₃O₄/Py) has been developed. The prepared catalyst was characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, X‐ray diffraction, vibrating sample magnetometry and energy‐dispersive X‐ray analysis. Accordingly, the Fe₃O₄/Py nanoparticles show a superparamagnetic property with a saturation magnetization of 61 emu g^?1, indicating potential application in magnetic separation technology. Our experimental results reveal that the pyridine‐functionalized Fe₃O₄ nanoparticles are an efficient base catalyst for the domino condensation of various aromatic aldehydes, Meldrum's acid and 5‐methylpyrazol‐3‐amine under very mild reaction condition and in the presence of ethanol solvent. Moreover, the synthesized catalyst was used for one‐pot, three‐component condensation of aromatic aldehydes with barbituric acid and malononitrile to produce 7‐amino‐2,4‐dioxo‐5‐phenyl‐2,3,4,5‐tetrahydro‐1H‐pyrano[2,3‐d]pyrimidine‐6‐carbonitriles. All reactions are completed in short times and all products are obtained in good to excellent yields. Also, notably, the catalyst was reused five times without significant degradation in catalytic activity and performance. Copyright © 2016 John Wiley & Sons, Ltd.     

Caesium carbonate supported on hydroxyapatite‐encapsulated Ni0.5Zn0.5Fe2O4 nanocrystallites as a novel magnetically basic catalyst for the one‐pot synthesis of pyrazolo[1,2‐b]phthalazine‐5,10‐diones

A novel nanomagnetic basic catalyst of caesium carbonate supported on hydroxyapatite‐coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles (Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃) was prepared. This new catalyst was fully characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X‐ray diffraction and vibrating sample magnetometry techniques, and then the catalytic activity of this catalyst was investigated in the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives. Also, Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃ could be reused at least five times without significant loss of activity and could be recovered easily by applying an external magnet. Thus, the developed nanomagnetic catalyst is potentially useful for the green and economic production of organic compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Efficient conversion of fructose to 5‐hydroxymethylfurfural by functionalized γ‐Al2O3 beads

Millimeter size γ‐Al₂O₃ beads were prepared by alginate assisted sol–gel method and grafting organic groups with propyl sulfonic acid and alkyl groups as functionalized γ‐Al₂O₃ bead catalysts for fructose dehydration to 5‐hydroxymethylfurfural (5‐HMF). Experiment results showed that the porous structure of γ‐Al₂O₃ beads was favorable to the loading and dispersion of active components, and had an obvious effect on the properties of the catalyst. The lower calcination temperature of γ‐Al₂O₃ beads increased the specific surface area, the hydrophobicity and the activity of catalysts. Competition between the reaction of alkyl groups and ‐SH groups with surface hydroxyl during the preparation process of the catalyst influenced greatly the acid site densities, hydrophobic properties and activity of the catalyst. With an increase in the alkyl group chain, the hydrophobicity of catalysts increased obviously and the activity of the catalyst was enhanced. The most hydrophobic catalyst C₁₆‐SO₃H‐γ‐Al₂O₃–650°C exhibited the highest yield of 5‐HMF (84%) under the following reaction conditions: reaction medium of dimethylsulfoxide/H₂O (V/V, 4:1), catalyst amount of 30 mg, temperature of 110°C and reaction time of 4 hr.     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.     

Facile fabrication of magnetic MoO2–Salen‐modified graphene‐based catalyst for epoxidation of alkenes

A facile, green and efficient method for the immobilization of MoO₂–Salen onto graphene hybridized with glucose‐coated magnetic Fe₃O₄ nanoparticles is proposed to fabricate a magnetic organic–inorganic hybrid heterogeneous RGO/Fe₃O₄@C‐Salen‐MoO₂ catalyst for the epoxidation of cyclooctene and geraniol using tert ‐butyl hydroperoxide or H₂O₂ as oxidant. Carbon‐coated Fe₃O₄ can improve the stability and add functional ─OH groups on the surface of Fe₃O₄. The fabricated composite exhibited good performance due to good dispersion of MoO₂–Salen active sites. The catalyst can be easily separated from the reaction system using a permanent magnet and used three times without significantly losing its catalytic activity and selectivity.     

Supramolecular Fe3O4@PEG/−diaza crown ether@Ni: a novel magnetically reusable nano catalyst for the clean synthesis of 2‐aryl‐2,3‐dihydroquinazolin‐4(1H)‐ones

Ni@diaza crown ether complex supported on magnetic nanoparticle was provided by grafting technique. The catalytic activity of Fe₃O₄@diaza crown ether@Ni was explored through one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and it was used as an efficient and recoverably constant nanocatalyst. FT‐IR, SEM, TEM, XRD, BET, ICP, EDS, and TGA techniques were employed to specify the nanocatalyst. This heterogeneous catalyst demonstrated acceptable recyclability and could be used again several times with no considerable loss of its catalytic activity.     

One‐Step Production of 1,3‐Butadiene from 2,3‐Butanediol Dehydration

We report the direct production of 1,3‐butadiene from the dehydration of 2,3‐butandiol by using alumina as catalyst. Under optimized kinetic reaction conditions, the production of methyl ethyl ketone and isobutyraldehyde, formed via the pinacol–pinacolone rearrangement, was markedly reduced and almost 80 % selectivity to 1,3‐butadiene and 1,3‐butadiene could be achieved. The presence of water plays a critical role in the inhibition of oligomerization. The amphoteric nature of γ‐Al₂O₃ was identified as important and this contributed to the improved catalytic selectivity when compared with other acidic catalysts.     

Preparation of magnetic Fe3O4/P (GMA‐DVB)‐PEI/Pd highly efficient catalyst with core‐shell structure

In this paper, a simple route for palladium (Pd) nanoparticles attached to the surface of hollow magnetic Fe₃O₄/P (GMA‐DVB)‐polyethyleneimine (PEI) microspheres was established. Due to the large amount of imidogen groups and tertiary amine groups presenting in the PEI, Pd²⁺ ions could be anchored to the support by complexation with a polyfunctional organic ligand. Thereafter, a magnetic Pd catalyst having a high loading amount and good dispersibility was obtained by reducing Pd²⁺ ions. Afterwards, the prepared catalyst was characterized by TEM, SEM, FTIR, XRD, TGA, VSM, and UV–vis in detail. Ultimately, their catalytic activity was evaluated using the reduction of 4‐nitrophenol (4‐NP). Research showed that the Fe₃O₄/P (GMA‐DVB)‐PEI/Pd catalyst possessed high catalytic performances for the reduction of 4‐NP with a conversion rate of 98.43% within 540 s. Furthermore, the catalyst could be easily recovered and reused at least for nine successive cycles.     

Fe3O4@SiO2@sulfated boric acid as superparamagnetic and recyclable nanocatalyst‐assisted,one‐pot,pseudo four‐component synthesis of 5‐amino‐2‐aryl‐3H‐chromeno[4,3,2‐de][1,6]naphthyridine‐4‐carbonitrile derivatives

The catalytic performance of the superparamagnetic nanocatalyst Fe₃O₄@SiO₂@Sulfated boric acid as a green, recyclable, and acidic solid catalyst in the synthesis of chromeno[4,3,2‐de][1,6]naphthyridine derivatives has been studied. Chromeno[4,3,2‐de][1,6]naphthyridine derivatives via a pseudo four‐component reaction from aromatic aldehydes (1 mmol), malononitrile (2 mmol), and 2′‐hydroxyacetophenone in the presence of Fe₃O₄@SiO₂@Sulfated boric acid (0.004 g) as a nanocatalyst in 3 mL of water as a green solvent at 80°C has been synthesized. The advantages of this method are higher product yields in shorter reaction times, easy recyclability and reusability of the catalyst, and easy work‐up procedures. The nanocatalyst was reused at least six times. The nanocatalyst retained its stability in the reaction, and after reusability, it was separated easily from the reaction by an external magnet.     

Catalytic Performance of Modified HMCM‐22 Catalysts in Xylene Isomerization

HMCM‐22 catalysts modified with La₂O₃ (5% La) and MgO (≈0.87% Mg) were prepared respectively by impregnation method, and were characterized by scanning electron microscopy, X‐ray diffraction, N₂ physical adsorption‐desorption and temperature‐programmed desorption of NH₃. The effect of supported metallic oxides (La₂O₃, MgO) on catalytic performance in xylene isomerization of C8 aromatics (ethylbenzene, m‐xylene and o‐xylene) was investigated in detail. The experimental results showed that 5% La/HMCM‐22 catalyst had higher isomerization activity and stronger shape‐selectivity than 0.87% Mg/HMCM‐22 catalyst, owing to its more acid sites and smaller pore size. And the loading amount of La was optimized to be about 7%. Moreover, supporting metal over 7% La/HMCM‐22, respectively with 0.3% Pt, 3% Ni and 3% Mo, was carried out to prepare bifunctional isomerization catalysts. In comparison, 3% Mo/7% La/HMCM‐22 showed the best catalytic performance with both high activity and high selectivity, with the low hydrocracking of m‐xylene and o‐xylene. Besides, the optimal reaction conditions were found: 340°C, 1.5 MPa H₂, WHSV 4 h^?1 and H₂/C8 4 mol/mol. Under the above conditions, ethylbenzene conversion was up to 20%, para‐selectivity was over 23% with low xylene loss of 2.9%.