Thermische Lactonisierung von Estern γ-Brom-α, β-ungesättigter Carbonsäuren zu Δα-Butenoliden. Direkte γ-Bromierung von α, β-ungesättigten Säuren

By heating with iron powder at 120–150° some γ-bromo-α, β-unsaturated carboxylic methyl esters, and, less smothly, the corresponding acids, were lactonized to Δ^7alpha;-butenolides with elimination of methyl bromide. The following conversions have thus been made: methyl γ-bromocrotonate ( 1c ) and the corresponding acid ( 1d ) to Δ^α-butenolide ( 8a ), methyl γ-bromotiglate ( 3c ) and the corresponding acid ( 3d ) to α-methyl-Δ^α-butenolide ( 8b ), a mixture of methyl trans- and cis-γ-bromosenecioate ( 7c and 7e ) and a mixture of the corresponding acids ( 7d and 7f ) to β-methyl-Δ^α-butenolide ( 8c ). The procedure did not work with methyl trans-γ-bromo-Δ^α-pentenoate ( 5c ) nor with its acid ( 5d ). Most of the γ-bromo-α, β-unsaturated carboxylic esters ( 1c, 7c, 7e and 5c ) are available by direct N-bromosuccinimide bromination of the α, β-unsaturated esters 1a, 7a and 5a ; methyl γ-bromotiglate ( 3c ) is obtained from both methyl tiglate ( 3a ) and methyl angelate ( 4a ), but has to be separated from a structural isomer. The γ-bromo-α, β-unsaturated esters are shown by NMR. to have the indicated configurations which are independent of the configuration of the α, β-unsaturated esters used; the bromination always leads to the more stable configuration, usually the one with the bromine-carrying carbon anti to the carboxylic ester group; an exception is methyl γ-bromo-senecioate, for which the two isomers (cis, 7e , and trans, 7d ) have about the same stability. The N-bromosuccinimide bromination of the α,β-unsaturated carboxylic acids 1b , 3b , 4b , 5b and 7b is shown to give results entirely analogous to those with the corresponding esters. In this way γ-bromocrotonic acid ( 1 d ), γ-bromotiglic acid ( 3 d ), trans- and cis-γ-bromosenecioic acid ( 7d and 7f ) as well as trans-γ-bromo-Δ^α-pentenoic acid ( 5d ) have been prepared. Iron powder seems to catalyze the lactonization by facilitating both the elimination of methyl bromide (or, less smoothly, hydrogen bromide) and the rotation about the double bond. α-Methyl-Δ^α-butenolide ( 8b ) was converted to 1-benzyl-( 9a ), 1-cyclohexyl-( 9b ), and 1-(4′-picoly1)-3-methyl-Δ^α-pyrrolin-2-one ( 9 c ) by heating at 180° with benzylamine, cyclohexylamine, and 4-picolylamine. The butenolide 8b showed cytostatic and even cytocidal activity; in preliminary tests, no carcinogenicity was observed. Both 8b and 9c exhibited little toxicity.     

The Crystal and Molecular Structure of 3-Oxo-17β-acetoxy-Δ4-14α-methyl-8α, 9β, 10α, 13α-estrene

The crystal and molecular structure of 3-oxo-17β-acetoxy-Δ⁴-14α-methyl-8α, 9β, 10α, 13α-estrene, C₂₁H₃₀O₃, has been determined by X-ray diffraction analysis. The crystals belong to the orthorhombic space group P2₁2₁2₁, with the cell dimensions a = 12.093 Å, b = 19.667 Å, c = 7.746 Å; Z = 4. Intensity data were collected at room temperature with an automatic four-circle diffractometer. The structure was solved by direct methods and the parameters were refined by least-squares analysis. All the hydrogen atoms were included in the refinement. The final R value was 0.038 for 1413 observed reflections. The conformation of ring A is intermediate between a half-chair and a 1, 2-diplanar form. The hydrogens at C(9) and C(10) are anti, the B/C ring junction is trans, and rings B and C adopt chair conformations. Ring D is cis fused and is halfway between C₂ and C_s forms.     

Preparation and Absolute Configuration of (−)-(E)-α-trans-Bergamotenone

The synthesis, absolute configuration, and olfactive evaluation of (?)-(E)-α-trans-bergamotenone (= (?)-(1′S,6′R,E)-5-(2′,6′-dimethylbicyclo[3.1.1]hept-2′-en-6′-yl)pent-3-en-2-one; (?)- 1 ), as well as its homologue (?)- 19 are reperted. The previously arbitrarily attributed absolute configuration of 1 and of (?)-α-trans-bergamotene (= (?)-(1 S,6R)-2,6-dimethyl-6-(4-methylpent-3-enyl)bicyclo[3.1. 1]hept-2-ene; (?)- 2 ), together with those of the structurally related aldehydes (?)- 3a,b and alcohols (?)- 4a,b , have been rigorously assigned.     

Stereospecific polymerization of benzyl α-(alkoxymethyl) acrylates

α-(Alkoxymethyl) acrylates, such as methyl α-(phenoxymethyl) acrylate, benzyl α-(methoxymethyl)acrylate (BMMA), benzyl α-(benzyloxymethyl)acrylate, and benzyl α-(tert-butoxymethyl)acrylate, were synthesized, and their polymerizability and the stereoregularity of the polymers obtained by radical and anionic methods were investigated. The radically obtained polymers were found to be atactic by ¹³C- and ¹H-NMR analyses, but the polymers obtained with lithium reagents in toluene at −78°C were highly isotactic. Further, it is noteworthy that isotactic polymers were also produced with lithium reagents even in tetrahydrofuran. Effects of polymerization temperature and counter cation on stereoregularity were clearly observed in the polymerization of BMMA, and a potassium reagent afforded an almost atactic polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 721–726, 1997     

Synthesis of Enantiomerically Pure D- and L-(Heteroaryl)alanines by asymmetric hydrogenation of (Z)-α-amino-αβ-didehydro esters

Homogeneous asymmetric hydrogenation of a wide range of methyl and tert-butyl (Z)-2-(acylamino)-3-(heteroaryl)acrylates (see 1a–f and 2a–d, f, g , resp.) catalyzed by diphosphinerhodium catalysts was studied for the synthesis of enantiomerically pure 3-furyl-, 3-thienyl-, and 3-pyrrolylalanines (see 3a–f , and 4a–d, g ; Scheme 1). The precursors, the (Z)-α-amino-α,β-didehydro esters 1a–f and 2a–d, f, g were prepared in high yields using the phosphorylglycine-ester method (Scheme 1). Isomerically pure (Z)-α-amino-α,β-didehydro esters were required to obtain the highest enantiomeric excesses (ee's) in the asymmetric hydrogenation, and the tert-butyl-ester strategy was beneficial in terms of both getting pure (Z)-α-amino-α,β-didehydro esters and obtaining high ee's in the hydrogenation. Finally, in contrast to the methyl-ester series, deprotection of the tert-butyl esters 4a–d, g was easily performed using CF₃CO₂H without any racemization.     

α-Alkylation of Amino Acids without Racemization. Preparation of Either (S)- or (R)-α-Methyldopa from (S)-Alanine

Enantiomerically pure cis- and trans-5-alkyl-1-benzoyl-2-(tert-butyl)-3-methylimidazolidin-4-ones ( 1, 2, 11, 15, 16 ) and trans-2-(tert-butyl)-3-methyl-5-phenylimidazolidin-4-one ( 20 ), readily available from (S)-alanine, (S)-valine, (S)-methionine, and (R)-phenylglycine are deprotonated to chiral enolates (cf. 3, 4, 12, 21 ). Diastereoselective alkylation of these enolates to 5,5-dialkyl- or 5-alkyl-5-arylimidazolidinones ( 5, 6, 9, 10, 13a-d, 17, 18, 22 ) and hydrolysis give α-alkyl-α-amino acids such as (R)- and (S)-α-methyldopa ( 7 and 8a , resp.), (S)-α-methylvaline ( 14 ), and (R)-α-methyl-methionine ( 19 ). The configuration of the products is proved by chemical correlation and by NOE ¹H-NMR measurements (see 23, 24 ). In the overall process, a simple, enantiomerically pure α-amino acid can be α-alkylated with retention or with inversion of configuration through pivaladehyde acetal derivatives. Since no chiral auxiliary is required, the process is coined ‘self-reproduction of a center of chirality’. The method is compared with other α-alkylations of amino acids occurring without racemization. The importance of enantiomerically pure, α-branched α-amino acids as synthetic intermediates and for the preparation of biologically active compounds is discussed.     

Kinetics of the reactions of cyclopropane derivatives. V. The gas-phase unimolecular reactions of 1 α-chloro-2α,3α-dimethylcyclopropane and 1α-chloro-2α,3β-dimethylcyclopropane

Thermolysis of the “all-cis” compound 1α-chloro-2α,3α-dimethylcyclopropane (A) at 550–607 K and 6–115 torr is a first-order homogeneous non-radical-chain process giving penta-1,3-diene (PD) and HCl as products. The Arrhenius parameters are log₁₀A(sec^?1) = 13.92 ± 0.08 and E = 199.6 ± 0.9 kJ/mol. The isomer with trans-methyl groups, 1α-chloro-2α,3β-dimethylcyclopropane (B) reacts by two parallel first-order processes giving as observed products trans-4-chloropent-2-ene (4CP) and PD + HCl, with log₁₀A(sec^?1) = 14.6 and 13.8, respectively, and E = 199.5 and 190.2 kJ/mol, respectively. The 4CP undergoes secondary decomposition to PD + HCl (as investigated previously). Comparison of the results for compounds (A) and (B) with those for other gas-phase and solution reactions leads to the conclusion that the gas-phase thermolyses proceed by rate-determining ring opening to form olefins which may decompose further by thermal or chemically activated reactions, and that the ring opening is a semiionic electrocyclic reaction in which alkyl groups in the 2,3-positions trans to the migrating chlorine semianion move apart, with appropriate consequences for the rate of reaction and the stereochemistry of the products.     

cis‐trans Peptide‐Bond Isomerization in α‐Methylproline Derivatives

α‐Methyl‐L ‐proline is an α‐substituted analog of proline that has been previously employed to constrain prolyl peptide bonds in a trans conformation. Here, we revisit the cis‐trans prolyl peptide bond equilibrium in derivatives of α‐methyl‐L ‐proline, such as N‐Boc‐protected α‐methyl‐L ‐proline and the hexapeptide H‐Ala‐Tyr‐αMePro‐Tyr‐Asp‐Val‐OH. In Boc‐α‐methyl‐L ‐proline, we found that both cis and trans conformers were populated, whereas, in the short peptide, only the trans conformer was detected. The energy barrier for the cis‐trans isomerization in Boc‐α‐methyl‐L ‐proline was determined by line‐shape analysis of NMR spectra obtained at different temperatures and found to be 1.24 kcal/mol (at 298 K) higher than the corresponding value for Boc‐L ‐proline. These findings further illuminate the conformationally constraining properties of α‐methyl‐L ‐proline.     

2,4‐Bis(α,α‐di­methyl­benzyl)­phenol

The structure of the title compound, 2,4‐bis(1‐methyl‐1‐phenylethyl)phenol, C₂₄H₂₆O, was found to have a torsion angle of 129.95 (13)° for the C—C bond that connects the benzyl carbon to the phenol ring ortho to the OH group. A value of ～50° was expected from molecular mechanics calculations. Intermolecular interactions, in particular O—H?O and edge–face π bonding, may contribute to this discrepancy. Intramolecular O—H?π bonding is also observed.     

Methyl 4‐O‐β‐d‐galacto­pyran­osyl α‐d‐gluco­pyran­oside (methyl α‐lactoside)

Methyl α‐lactoside, C₁₃H₂₄O₁₁, (I), is described by glycosidic torsion angles ϕ (O5_gal—C1_gal—O1_gal—C4_glc) and ψ (C1_gal—O1_gal—C4_glc—C5_glc), which have values of −93.52 (13) and −144.83 (11)°, respectively, where the ring atom numbering conforms to the convention in which C1 is the anomeric C atom and C6 is the exocyclic hydroxy­methyl (–CH₂OH) C atom in both residues. The linkage geometry is similar to that observed in methyl β‐lactoside methanol solvate, (II), in which ϕ is −88.4 (4)° and ψ is −161.3 (4)°. As in (II), an inter­molecular O3_glc—H⋯O5_gal hydrogen bond is observed in (I). The hydroxy­methyl group conformation in both residues is gauche–trans, with torsion angles ω_gal (O5_gal—C5_gal—C6_gal—O6_gal) and ω_glc (O5_glc—C5_glc—C6_glc—O6_glc) of 69.15 (13) and 72.55 (14)°, respectively. The latter torsion angle differs substantially from that found for (II) [−54.6 (2)°; gauche–gauche]. Cocrystallization of methanol, which is hydrogen bonded to O6_glc in the crystal structure of (II), presumably affects the hydroxy­methyl conformation in the Glc residue in (II).     

Analogues of α‐Campholenal (= (1R)‐2,2,3‐Trimethylcyclopent‐3‐ene‐1‐acetaldehyde) as Building Blocks for (+)‐β‐Necrodol (= (1S,3S)‐2,2,3‐Trimethyl‐4‐methylenecyclopentanemethanol) and Sandalwood‐like Alcohols

To complete our panorama in structure–activity relationships (SARs) of sandalwood‐like alcohols derived from analogues of α‐campholenal (= (1R)‐2,2,3‐trimethylcyclopent‐3‐ene‐1‐acetaldehyde), we isomerized the epoxy‐isopropyl‐apopinene (?)‐ 2d to the corresponding unreported α‐campholenal analogue (+)‐ 4d (Scheme 1). Derived from the known 3‐demethyl‐α‐campholenal (+)‐ 4a , we prepared the saturated analogue (+)‐ 5a by hydrogenation, while the heterocyclic aldehyde (+)‐ 5b was obtained via a Bayer‐Villiger reaction from the known methyl ketone (+)‐ 6 . Oxidative hydroboration of the known α‐campholenal acetal (?)‐ 8b allowed, after subsequent oxidation of alcohol (+)‐ 9b to ketone (+)‐ 10 , and appropriate alkyl Grignard reaction, access to the 3,4‐disubstituted analogues (+)‐ 4f,g following dehydration and deprotection. (Scheme 2). Epoxidation of either (+)‐ 4b or its methyl ketone (+)‐ 4h , afforded stereoselectively the trans‐epoxy derivatives 11a,b , while the minor cis‐stereoisomer (+)‐ 12a was isolated by chromatography (trans/cis of the epoxy moiety relative to the C₂ or C₃ side chain). Alternatively, the corresponding trans‐epoxy alcohol or acetate 13a,b was obtained either by reduction/esterification from trans‐epoxy aldehyde (+)‐ 11a or by stereoselective epoxidation of the α‐campholenol (+)‐ 15a or of its acetate (?)‐ 15b , respectively. Their cis‐analogues were prepared starting from (+)‐ 12a . Either (+)‐ 4h or (?)‐ 11b , was submitted to a Bayer‐Villiger oxidation to afford acetate (?)‐ 16a . Since isomerizations of (?)‐ 16 lead preferentially to β‐campholene isomers, we followed a known procedure for the isomerization of (?)‐epoxyverbenone (?)‐ 2e to the norcampholenal analogue (+)‐ 19a . Reduction and subsequent protection afforded the silyl ether (?)‐ 19c , which was stereoselectively hydroborated under oxidative condition to afford the secondary alcohol (+)‐ 20c . Further oxidation and epimerization furnished the trans‐ketone (?)‐ 17a , a known intermediate of either (+)‐β‐necrodol (= (+)‐(1S,3S)‐2,2,3‐trimethyl‐4‐methylenecyclopentanemethanol; 17c ) or (+)‐(Z)‐lancifolol (= (1S,3R,4Z)‐2,2,3‐trimethyl‐4‐(4‐methylpent‐3‐enylidene)cyclopentanemethanol). Finally, hydrogenation of (+)‐ 4b gave the saturated cis‐aldehyde (+)‐ 21 , readily reduced to its corresponding alcohol (+)‐ 22a . Similarly, hydrogenation of β‐campholenol (= 2,3,3‐trimethylcyclopent‐1‐ene‐1‐ethanol) gave access via the cis‐alcohol rac‐ 23a , to the cis‐aldehyde rac‐ 24 .     

a,a,a,b-ZnT(o-BocThr)APP对咪唑衍生物和氨基酸酯的分子识别研究

Molecular Recognition of α,α,α,β-ZnT（o-BocThr）APP （1） toward a series of imidazole derivatives and amino acid esters was investigated. Association constants were determined in chloroform by means of UV-Vis titration method. The association constants of 1 with imidazole derivatives are larger than those of 1 with amino acid esters. 1H NMR spectra were investigated to describe the binding mode of the recognition system, showing that all the protons of the guests were shifted to upfield. The circular dichroism spectra of 1-L-/D-ValOMe showed a split cotton effect in Soret region, while those of 1-L-/D-PheOMe showed no split cotton effect. Molecular modeling was performed to understand chiral recognition on a molecular level. Quantum chemical calculation was carried out based on the stable conformations of these recognition systems, which gave a reasonable explanation for the behavior of molecular recognition. The results indicated that the conformation of 1-D-ValOMe was more stable than that of 1-L-ValOMe.     

Unusual Acid-Catalyzed Rearrangement of Two α,α′-Diimino-oximes

2-[2-(Alkylimino)-2-phenylethylidene]pyrrolidines (vinamidines, 3 – 6 ) were obtained either via activation of the corresponding vinologous amide 1 with Meerwein salt and subsequent treatment of the intermediate 2 with an amine, or more directly by acid-catalyzed condensation of the Schiff bases derived from acetophenone with 2-ethoxy-1-pyrroline. Nitrosation of these vinamidines led to α,α′-diimino-oximes. In two cases ( 10 , 11 ), these oximes underwent acid-catalyzed rearrangement with formation of a 5,6,7,8-tetrahydroimidazo[1,2-a]pyridine ring system ( 12 , 13 ). X-Ray analysis of one of these products ( 13 ) and also of one of the vinamidine salts ( 6 ) are presented.     

Synthesis,structural and conformational study of 4-α-(or β)-p-chlorobenzoyloxy-1-azaadamantane hydrochloride

4-α-(or β)-p-Chlorobenzoyloxy-1-azaadamantane hydrochloride have been synthesized and studied by ¹H and ¹³C nmr spectroscopy, and the crystal structure of the α-epimer has been determined by X-ray diffraction. Each ring of the adamantane cage system is a nearly perfect chair, the substituted cyclohexane and piperidine rings, in endo and exo position respectively, having the biggest deviation. From the ¹H and ¹³C nmr data, several stereoelectronic effects have been deduced.     

Carbon-proton coupling constants in α-chlorostyrene-α-13C

The two stereochemically distinct two-bond carbon-13- hydrogen coupling constants J(¹³C? CH), for α-chlorostyrene-α-¹³C have been shown to be of similar magnitude but opposite sign (?6.3 and +5.6 Hz). A simple additivity relationship which adequately reproduces all the reported J(¹³C? CH) values for chloroethylenes has been found.     

Ketalizations of aryl ω-(2-imidazolyl)alkyl ketones by glycerol and 3-mercapto-1,2-propanediol. synthesis and characterization of cis- and trans-{2-aryl-2-[ω-(2-imidazolyl)alkyl](1,3-dioxolan-4-yl and 1,3-oxathiolan-5-yl)}methanols

Aryl 2-[(2-imidazolyl)ethyl or 3-(2-imidazolyl)propyl]ketones were ketalized by glycerol or 3-mercapto-1,2-propanediol in boiling benzene in the presence of 4-toluenesulfonic acid to provide the title compounds. The aryl substituents are 4-chloro-, 4-bromo-, 4-fluoro-, or 2,4-dichlorophenyl. While aryl (2-imidazolyl)methyl ketones condensed with glycerol to form cis- and trans-{2-aryl-2-[(2-imidazolyl)methyl]-4-(hydroxymethyl)}-1,3-dioxolanes, related condensations with 3-mercapto-1,2-propanediol, under similar, or even more stringent reaction conditions, produced no 1,3-oxathiolane analogs, with the starting ketones being recovered. Separation and structure determination of these racemic cis and trans isomeric products are described. The structure of these stereoisomers was established by means of ¹H and ¹³C nmr correlation and nOe experiments. Selective methylation of the N-unsubstituted 2-imidazolyl alcohols with one equivalent sodium hydride and methyl iodide provided the corresponding N-methyl alcohols in excellent yields. With excess benzoyl chloride, N-unsubstituted 2-imidazolyl alcohols were initially converted to O, N-dibenzoates from which the N-benzoyl group was easily cleaved by ammonium hydroxide in ethanol to provide benzoate esters.     

Enzyme-Mediated Preparation of (+)- and (–)-cis-α-Irone and (+)- and (–)-trans-α-Irone

The preparation of (−)- and (+)-trans-α-irone ( 1a and 1b , resp.) and of (+)- and (−)-cis-α-irone ( 1c and 1d , resp.) from commercially available Irone alpha ^® is reported. The relevant step in the synthetic sequence is the initial chromatographic separation of crystalline (±)-4,5-epoxy-4,5-dihydro-cis-α-irone ((±)- 5 ) from oily (±)-4,5-epoxy-4,5-dihydro-trans-α-irone ((±)- 4 ). The latter was subsequently converted, after NaBH₄ reduction, into the crystalline 3,5-dinitrobenzoate ester (±)- 8 , thus allowing a complete separation of the two corresponding diastereoisomeric alcohol derivatives. Suitable enantiomerically pure precursors of the desired products 1a – d were obtained by kinetic resolution of the racemic allylic alcohols derived from (±)- 5 and (±)- 8 , mediated by lipase PS (Amano). The last steps consisted of MnO₂ oxidation and removal of the epoxy moiety with Me₃SiCl/NaI in MeCN. External panel olfactory evaluation showed that (−)-cis-α-irone ( 1d ) has the finest and most distinct `orris butter' character.     

Ring-opening polymerization of α,β-disubstituted oxiranes by α-methoxyphenylmethylium hexachloroantimonate

α-Methoxyphenylmethylium hexachloroantimonate was used as a novel initiator for the polymerization of α,β-disubstituted oxiranes such as cyclohexene oxide (CHO) and 2-butene oxide (trans and cis) (2-BO) at ?78°C with dichloromethane or dichloromethane-toluene mixtures as solvents. The CHO polymerization mixture became turbid and the polymer precipitated in dichloromethane. The CHO polymerization proceed quantitatively in dichloromethane–toluene mixtures. The molecular weight distribution of polyCHO obtained was bimodal regardless of the solvent used. The polymerization of trans-2-BO was heterogeneous in both dichloromethane and dichloromethane–toluene mixture. The polymerization mixtures of cis-2-BO were transparent but reached a limit yield which was less than the polymer yield of trans-2-BO. Furthermore, the microstructure of the poly2-BOs were analyzed by Vandenberg's method and the results confirmed Vandenberg's finding that inversion of configuration occurs in the propagation step.     

Furopyridines. VIII. Molecular structure and two-dimensional NMR spectral assignment of 2,14-dimethyl-8aβ-hydroxy-7,10-dioxo-5β,6β-(propano)-6α,8α-(ethanoimino)-trans-perhydroisoquinoline

This paper reports the two-dimensional nmr spectral assignment and the X-ray structural determination of 2,14-dimethyl-8β-hydroxy-7,10-dioxo-5β,6β-(propano)-6α,8α-(ethanoimino)-trans-perhydroisoquinoline V which was obtained from 7,10-dimethyl-2β-hydroxy-14-oxo-2,3-(methanoiminoethano)-3β,4β-(propano)-3,4,5,6,7,8-hexahydro-2H-pyrano[2,3-c]pyridine IV by isomerization with hydrochloric acid. Both the compounds IV and V afforded the same dimethiodide IV -2MeI, while the configurational isomer 2,14-dimethyl-8aβ-hydroxy-7,10-dioxo-5α,6β-(propano)-6α,8α-(ethanoimino)-trans-perhydroisoquinoline III gave monomethiodide III -Mel. The structures of these methiodides were also confirmed by X-ray analysis.     

Diastereoface Selectivity During Pthalimidonitrene Additions to (E)-and (Z)-configurated α, β-unsaturated esters,induced by a chiral center in the γ-position

In-situ-generated phthalimidonitrene was added to five α, β-unsaturated esters containing a chiral secondary O-function at C(γ). The additions were fully suprafacial, inasmuch as the (E)-isomers 1 afforded only the trans-aziridines 2 and 3 (J(β, γ) = 4.8?5.1 Hz) and the (Z)-isomers 4 only the cis-aziridines 5 and 6 (8.2?8.5 Hz). The products 2 , 3 , 5 , and 6 where shown to possess the arabino-, xylo-, ribo-, and lyxo- configuration, respectively, by X-ray structure analysis of 2b , 2d , and 6a . The diastereoface selectivity of the nitrene additions, induced by the chiral substructure around C(γ), resulted in more 2 than 3 from 1 , but more 6 than 5 from 4 , which means that the preference of attack at the double bond switches from one side to the other depending on the C=C configuration. The preferences were higher at lower temperature. The aziridines 2a , 2d , and 3d exhibit ¹H-NMR-visible isomerism at the ring N-atom; the major (78?95 %)invertomer A is always the one with the phthalimido group in trans-position to the (larger) substructure around C(γ). The other aziridines only show ¹H-NMR signals of one invertomer, which – by steric reasoning - ought to be A ; this is confirmed by a ¹H-NMR argument for 3a , 5a , 6a , 5c , and 6c .