Advances in Understanding Mechanisms of Perovskites and Pyrochlores as Electrocatalysts using In-Situ X-ray Absorption Spectroscopy

Metal oxides are some of the most promising candidates as electrocatalysts for electrical-energy-storage (EES) systems. Particularly, perovskite and pyrochlore oxides have been intensively investigated as bifunctional electrocatalysts because of their superior catalytic activities during the oxygen-reduction and -evolution reactions. However, the origin of the outstanding catalytic activities and structural changes of the materials are not clear, in part due to the difficulty in identification during electrocatalysis. In this Minireview, we present a critical overview of recent progress in understanding catalytic mechanisms of perovskite and pyrochlore oxides, highlighting the innovative in-situ X-ray absorption spectroscopy (XAS) analysis for electrochemical tests.     

非催化瞬态铱脱溶一筛选铱基钙钛矿析氧催化剂时不可忽视的实验现象

传统化石燃料的过度开采、消耗在推动各国工业化进程的同时,也导致了能源枯竭、环境污染和气候恶化等问题2为应对全球环境治理等难题,推进能源变革,构建脱碳化的能源体系势在必行2质子交换膜电解槽(PEMWE)能够在高电流密度下运行,其体积小,效率高,具有更高的灵活性,更有利于反应进行,能够克服可再生能源(太阳能、风能和水电等)...     

Molecular Mixed‐Metal Manganese Oxido Cubanes as Precursors to Heterogeneous Oxygen Evolution Catalysts

Well‐defined mixed‐metal [CoMn₃O₄] and [NiMn₃O₄] cubane complexes were synthesized and used as precursors for heterogeneous oxygen evolution reaction (OER) electrocatalysts. The discrete clusters were dropcasted onto glassy carbon (GC) and indium tin oxide (ITO) electrodes, and the OER activities of the resulting films were evaluated. The catalytic surfaces were analyzed by various techniques to gain insight into the structure‐function relationships of the electrocatalysts’ heterometallic composition. Depending on preparation conditions, the Co‐Mn oxide was found to change metal composition during catalysis, while the Ni–Mn oxides maintained the NiMn₃ ratio. XAS studies provided structural insights indicating that the electrocatalysts are different from the molecular precursors, but that the original NiMn₃O₄ cubane‐like geometry was maintained in the absence of thermal treatment ( 2‐Ni ). In contrast, the thermally generated 3‐Ni develops an oxide‐like extended structure. Both 2‐Ni and 3‐Ni undergo structural changes upon electrolysis, but they do not convert into the same material. The observed structural motifs in these heterogeneous electrocatalysts are reminiscent of the biological oxygen‐evolving complex in Photosystem II, including the MMn₃O₄ cubane moiety. The reported studies demonstrate the use of discrete heterometallic oxide clusters as precursors for heterogeneous water oxidation catalysts of novel composition and the distinct behavior of two sets of mixed metal oxides.     

A review of transition metal‐based bifunctional oxygen electrocatalysts

Electrochemical energy storage and conversion devices play a key role in the development of clean, sustainable, and efficient energy systems to meet the sustainable growth of our society. However, challenging issues including the sluggish kinetics of oxygen electrode reactions involving the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are present, limiting the implementation of devices such as metal‐air batteries, water electrolyzers, and regenerative fuel cells. In this review, various monometallic and bimetallic transition metal oxides (TMOs) and hydroxides are summarized in terms of their application for ORR/OER, in which the merits and demerits of various precious metal and carbon‐based metal oxide materials are discussed, with requirements for better electrocatalysts and catalyst support being introduced as well. Following this, different approaches to improve catalytic activity such as the introduction of doping and defects, the manipulation of crystal facets, and the engineering of supports, compositions, and morphologies are summarized in which TMOs with improved ORR/OER catalytic activities can be synthesized, further improving the speed, stability, and polarization of electrochemical energy storage and conversion devices. Finally, perspectives into the improvement of performance and the better understanding of ORR/OER mechanisms for bifunctional electrocatalysts using in situ spectroscopic techniques and density functional theory calculations are also discussed.     

Activating Inert,Nonprecious Perovskites with Iridium Dopants for Efficient Oxygen Evolution Reaction under Acidic Conditions

Simultaneous realization of improved activity, enhanced stability, and reduced cost remains a desirable yet challenging goal in the search of oxygen evolution electrocatalysts in acid. Herein we report iridium‐containing strontium titanates (Ir‐STO) as active and stable, low‐iridium perovskite electrocatalysts for the oxygen evolution reaction (OER) in acid. The Ir‐STO contains 57 wt % less iridium relative to the benchmark catalyst IrO₂, but it exhibits more than 10 times higher catalytic activity for OER. It is shown to be among the most efficient iridium‐based oxide electrocatalysts for OER in acid. Theoretical results reveal that the incorporation of iridium dopants in the STO matrix activates the intrinsically inert titanium sites, strengthening the surface oxygen adsorption on titanium sites and thereby giving nonprecious titanium catalytic sites that have activities close to or even better than iridium sites.     

Activating Inert,Nonprecious Perovskites with Iridium Dopants for Efficient Oxygen Evolution Reaction under Acidic Conditions

Simultaneous realization of improved activity, enhanced stability, and reduced cost remains a desirable yet challenging goal in the search of oxygen evolution electrocatalysts in acid. Herein we report iridium‐containing strontium titanates (Ir‐STO) as active and stable, low‐iridium perovskite electrocatalysts for the oxygen evolution reaction (OER) in acid. The Ir‐STO contains 57 wt % less iridium relative to the benchmark catalyst IrO₂, but it exhibits more than 10 times higher catalytic activity for OER. It is shown to be among the most efficient iridium‐based oxide electrocatalysts for OER in acid. Theoretical results reveal that the incorporation of iridium dopants in the STO matrix activates the intrinsically inert titanium sites, strengthening the surface oxygen adsorption on titanium sites and thereby giving nonprecious titanium catalytic sites that have activities close to or even better than iridium sites.     

Amorphous Oxide Nanostructures for Advanced Electrocatalysis

Amorphous oxides have attracted special attention as advanced electrocatalysts owing to their unique local structural flexibility and attractive electrocatalytic properties. With abundant randomly oriented bonds and surface-exposed defects (e.g., oxygen vacancies) as active catalytic sites, the adsorption/desorption of reactants can be optimized, leading to superior catalytic activities. Amorphous oxide materials have found wide electrocatalytic applications ranging from hydrogen evolution and oxygen evolution to oxygen reduction, CO₂ electroreduction and nitrogen electroreduction. The amorphous oxide electrocatalysts even outperform their crystalline counterparts in terms of electrocatalytic activity and stability. Despite of the merits and achievements for amorphous oxide electrocatalysts, there are still issues and challenges existing for amorphous oxide electrocatalysts. There are rarely reviews specifically focusing on amorphous oxide electrocatalysts and therefore it is imperative to have a comprehensive overview of the research progress and to better understand the achievements and issues with amorphous oxide electrocatalysts. In this minireview, several general preparation methods for amorphous oxides are first introduced. Then, the achievements in amorphous oxides for several important electrocatalytic reactions are summarized. Finally, the challenges and perspectives for the development of amorphous oxide electrocatalysts are outlined.     

Cobalt‐Doped Perovskite‐Type Oxide LaMnO3 as Bifunctional Oxygen Catalysts for Hybrid Lithium–Oxygen Batteries

Perovskite‐type oxides based on rare‐earth metals containing lanthanum manganate are promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline electrolyte. Perovskite‐type LaMnO₃ shows excellent ORR performance, but poor OER activity. To improve the OER performance of LaMnO₃, the element cobalt is doped into perovskite‐type LaMnO₃ through a sol–gel method followed by a calcination process. To assess electrocatalytic activities for the ORR and OER, a series of LaMn_1?xCo_xO₃ (x=0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) perovskite oxides were synthesized. The results indicate that the amount of doped cobalt has a significant effect on the catalytic performance of LaMn_1?xCo_xO₃. If x=0.3, LaMn_0.7Co_0.3O₃ not only shows a tolerable electrocatalytic activity for the ORR, but also exhibits a great improvement (>200 mV) on the catalytic activity for the OER; this indicates that the doping of cobalt is an effective approach to improve the OER performance of LaMnO₃. Furthermore, the results demonstrate that LaMn_0.7Co_0.3O₃ is a promising cost‐effective bifunctional catalyst with high performance in the ORR and OER for application in hybrid Li?O₂ batteries.     

Engineering Non‐sintered,Metal‐Terminated Tungsten Carbide Nanoparticles for Catalysis

Transition‐metal carbides (TMCs) exhibit catalytic activities similar to platinum group metals (PGMs), yet TMCs are orders of magnitude more abundant and less expensive. However, current TMC synthesis methods lead to sintering, support degradation, and surface impurity deposition, ultimately precluding their wide‐scale use as catalysts. A method is presented for the production of metal‐terminated TMC nanoparticles in the 1–4 nm range with tunable size, composition, and crystal phase. Carbon‐supported tungsten carbide (WC) and molybdenum tungsten carbide (Mo_xW_1−xC) nanoparticles are highly active and stable electrocatalysts. Specifically, activities and capacitances about 100‐fold higher than commercial WC and within an order of magnitude of platinum‐based catalysts are achieved for the hydrogen evolution and methanol electrooxidation reactions. This method opens an attractive avenue to replace PGMs in high energy density applications such as fuel cells and electrolyzers.     

Engineering Non‐sintered,Metal‐Terminated Tungsten Carbide Nanoparticles for Catalysis

Transition‐metal carbides (TMCs) exhibit catalytic activities similar to platinum group metals (PGMs), yet TMCs are orders of magnitude more abundant and less expensive. However, current TMC synthesis methods lead to sintering, support degradation, and surface impurity deposition, ultimately precluding their wide‐scale use as catalysts. A method is presented for the production of metal‐terminated TMC nanoparticles in the 1–4 nm range with tunable size, composition, and crystal phase. Carbon‐supported tungsten carbide (WC) and molybdenum tungsten carbide (Mo_xW_1?xC) nanoparticles are highly active and stable electrocatalysts. Specifically, activities and capacitances about 100‐fold higher than commercial WC and within an order of magnitude of platinum‐based catalysts are achieved for the hydrogen evolution and methanol electrooxidation reactions. This method opens an attractive avenue to replace PGMs in high energy density applications such as fuel cells and electrolyzers.     

Copper‐Modified Covalent Triazine Frameworks as Non‐Noble‐Metal Electrocatalysts for Oxygen Reduction

The electrochemical oxygen reduction reaction (ORR) is an important cathode reaction of various types of fuel cells. The development of electrocatalysts composed only of abundant elements is a key goal because currently only platinum is a suitable catalyst for ORR. Herein, we synthesized copper‐modified covalent triazine frameworks (CTF) hybridized with carbon nanoparticles (Cu‐CTF/CPs) as efficient electrocatalysts for the ORR in neutral solutions. The ORR onset potential of the synthesized Cu‐CTF/CP was 810 mV versus the reversible hydrogen electrode (RHE; pH 7), the highest reported value at neutral pH for synthetic Cu‐based electrocatalysts. Cu‐CTF/CP also displayed higher stability than a Cu‐based molecular complex at neutral pH during the ORR, a property that was likely as a result of the covalently cross‐linked structure of CTF. This work may provide a new platform for the synthesis of durable non‐noble‐metal electrocatalysts for various target reactions.     

High‐Rate Oxygen Electroreduction over Graphitic‐N Species Exposed on 3D Hierarchically Porous Nitrogen‐Doped Carbons

Nitrogen‐doped species (NDs) are theoretically accepted as a determinant of the catalytic activity of metal‐free N‐doped carbon (NC) catalysts for oxygen reduction reaction (ORR). However, direct relationships between ND type and ORR activity have been difficult to extract because the complexity of carbon matrix impairs efforts to expose specific NDs. Herein, we demonstrate the fabrication of a 3D hierarchically porous NC catalyst with micro‐, meso‐, and macroporosity in one structure, in which sufficient exposure and availability of inner‐pore catalytic sites can be achieved due to its super‐high surface area (2191 cm² g^?1) and interconnected pore system. More importantly, in‐situ formation of graphitic‐N species (GNs) on the surface of NC stimulated by KOH activation enables us to experimentally reveal the catalytic nature of GNs for ORR, which is of great significance for the design and development of advanced metal‐free NC electrocatalysts.     

Effect of Two‐Dimensional Crystal Orbitals on Fermi Surfaces and Electron Transport in Three‐Dimensional Perovskite Oxides

Perovskite oxides are candidate materials in catalysis, fuel cells, thermoelectrics, and electronics, where electronic transport is vital to their use. While the fundamental transport properties of these materials have been heavily studied, there are still key features that are not well understood, including the temperature‐squared behavior of their resistivities. Standard transport models fail to account for this atypical property because Fermi surfaces of many perovskite oxides are low‐dimensional and distinct from traditional semiconductors. In this work, the low‐dimensional Fermi surfaces of perovskite oxides are chemically interpreted in terms of two‐dimensional crystal orbitals that form the conduction bands. Using SrTiO₃ as a case study, the d/p‐hybridization that creates these low‐dimensional electronic structures is reviewed and connected to its fundamentally different electronic properties. A low‐dimensional band model explains several experimental transport properties, including the temperature and carrier‐density dependence of the effective mass, the carrier‐density dependence of scattering, and the temperature dependence of resistivity. This work highlights how chemical bonding influences semiconductor transport.     

Electrochemical Phase Evolution of Metal‐Based Pre‐Catalysts for High‐Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li‐S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal‐based pre‐catalysts (Co₄N) in working Li‐S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single‐crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all‐phase polysulfide‐involving reactions. Consequently, Co₄N enables stable operation of high‐rate (10 C, 16.7 mA cm^?2) and electrolyte‐starved (4.7 μL mg_S^?1) Li‐S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low‐valence metal compounds.     

Coupling Mo2C with Nitrogen‐Rich Nanocarbon Leads to Efficient Hydrogen‐Evolution Electrocatalytic Sites

In our efforts to obtain electrocatalysts with improved activity for water splitting, meticulous design and synthesis of the active sites of the electrocatalysts and deciphering how exactly they catalyze the reaction are vitally necessary. Herein, we report a one‐step facile synthesis of a novel precious‐metal‐free hydrogen‐evolution nanoelectrocatalyst, dubbed Mo₂C@NC that is composed of ultrasmall molybdenum carbide (Mo₂C) nanoparticles embedded within nitrogen‐rich carbon (NC) nanolayers. The Mo₂C@NC hybrid nanoelectrocatalyst shows remarkable catalytic activity, has great durability, and gives about 100 % Faradaic yield toward the hydrogen‐evolution reaction (HER) over a wide pH range (pH 0–14). Theoretical calculations show that the Mo₂C and N dopants in the material synergistically co‐activate adjacent C atoms on the carbon nanolayers, creating superactive nonmetallic catalytic sites for HER that are more active than those in the constituents.     

Hydrothermal Synthesis and Phase‐, Morphology‐Evolution Mechanism of Lead Titanate Nanostructures Assisted with Tetramethylammonium Hydroxide

Lead titanate nanostructures with different phases and morphologies, layered hexagonal PbTiO₂(CO₃)_0.3‐ (NO₃)_0.35(OH) nanosheets, pyrochlore Pb₂Ti₂O₆ nanodendites, pre‐perovskite PbTiO₃ nanofibres and perovskite PbTiO₃ nanoplates, have been synthesized via a conventional hydrothermal route assisted with different concentrations of tetramethylammonium hydroxide (TMAH). X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high‐resolution TEM (HRTEM) were employed to characterize the phase, morphology and growth behavior of the synthesized samples. The results reveal that at low TMAH concentration the obtained samples are mainly of PbTiO₂(CO₃)_0.3(NO₃)_0.35(OH) nanosheets. With the TMAH concentration increasing, the obtained samples change to pyrochlore Pb₂Ti₂O₆ nanodendites, pre‐perovskite PbTiO₃ nanofibres and perovskite PbTiO₃ nanoplates in turn. With the basis of the experimental results, the phase‐ and morphology‐evolution mechanism of the lead titanate nanostructures is discussed by combining the analysis of the lattice structure feature and the properties of TMAH.     

Scaled‐Up Synthesis of Amorphous NiFeMo Oxides and Their Rapid Surface Reconstruction for Superior Oxygen Evolution Catalysis

The anode oxygen evolution reaction (OER) is known to largely limit the efficiency of electrolyzers owing to its sluggish kinetics. While crystalline metal oxides are promising as OER catalysts, their amorphous phases also show high activities. Efforts to produce amorphous metal oxides have progressed slowly, and how an amorphous structure benefits the catalytic performances remains elusive. Now the first scalable synthesis of amorphous NiFeMo oxide (up to 515 g in one batch) is presented with homogeneous elemental distribution via a facile supersaturated co‐precipitation method. In contrast to its crystalline counterpart, amorphous NiFeMo oxide undergoes a faster surface self‐reconstruction process during OER, forming a metal oxy(hydroxide) active layer with rich oxygen vacancies, leading to superior OER activity (280 mV overpotential at 10 mA cm^?2 in 0.1 m KOH). This opens up the potential of fast, facile, and scale‐up production of amorphous metal oxides for high‐performance OER catalysts.     

Perovskite Oxide Based Electrodes for High‐Performance Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is an attractive strategy for the large‐scale production of renewable hydrogen from water. Developing cost‐effective, active and stable semiconducting photoelectrodes is extremely important for achieving PEC water splitting with high solar‐to‐hydrogen efficiency. Perovskite oxides as a large family of semiconducting metal oxides are extensively investigated as electrodes in PEC water splitting owing to their abundance, high (photo)electrochemical stability, compositional and structural flexibility allowing the achievement of high electrocatalytic activity, superior sunlight absorption capability and precise control and tuning of band gaps and band edges. In this review, the research progress in the design, development, and application of perovskite oxides in PEC water splitting is summarized, with a special emphasis placed on understanding the relationship between the composition/structure and (photo)electrochemical activity.     

Boosting ORR Catalytic Activity by Integrating Pyridine‐N Dopants,a High Degree of Graphitization,and Hierarchical Pores into a MOF‐Derived N‐Doped Carbon in a Tandem Synthesis

N‐doped carbon materials represent promising metal‐free electrocatalysts for the oxygen reduction reaction (ORR), the cathode reaction in fuel cells, metal–air batteries, and so on. A challenge for optimizing the ORR catalytic activities of these electrocatalysts is to tune their local structures and chemical compositions in a rational and controlled way that can achieve the synergistic function of each factor. Herein, we report a tandem synthetic strategy that integrates multiple contributing factors into an N‐doped carbon. With an N‐containing MOF (ZIF‐8) as the precursor, carbonization at higher temperatures leads to a higher degree of graphitization. Subsequent NH₃ etching of this highly graphitic carbon enabled the introduction of a higher content of pyridine‐N sites and higher porosity. By optimizing these three factors, the resultant carbon materials displayed ORR activity that was far superior to that of carbon derived from a one‐step pyrolysis. The onset potential of 0.955 V versus a reversible hydrogen electrode (RHE) and the half‐wave potential of 0.835 V versus RHE are among the top ranks of metal‐free ORR catalysts and are comparable to commercial Pt/C (20 wt %) catalysts. Kinetic studies revealed lower H₂O₂ yields, higher electron‐transfer numbers, and lower Tafel slopes for these carbon materials compared with that derived from a one‐step carbonization. These findings verify the effectiveness of this tandem synthetic strategy to enhance the ORR activity of N‐doped carbon materials.     

The Direct Electron Transfer of Iron‐containing Metal Organic Frameworks (Mil‐100) and Its Catalysis for the Oxygen Reduction Reaction in Room‐Temperature Alkaline Media on a Glass Carbon Electrode

The most common electrocatalysts for the oxygen reduction reaction (ORR) are platinum‐based ones. This work demonstrates the performance of iron‐containing metal organic frameworks (MOFs) as non‐platinum‐based nano‐electrocatalysts for ORR in an alkaline medium. As a new non‐platinum catalyst to achieve the active sites for the ORR, Mil‐100 (Fe) nanoparticles were used in aqueous KOH by the rotating‐disk electrode method. The main objectives of this study are the investigations on the electron transfer number (n ), Tafel slope, and catalytic performance. The particles size of the obtained powders is in the nanoscale range (approximately 25 nm). The electron transfer number for the ORR on the surface of iron‐containing catalyst is approximately 4, and the Tafel slope of diffusion‐corrected kinetic current density is ~50.7 mV per decade at low overpotential. This work might extend a new non‐precious‐metal catalyst structure for ORR for use in low‐temperature fuel cells.