A New Comparative Potentiometric Method for Analysis of Omarigliptin Using Three Different Sensors

This work represents first attempt for potentiometric determination of the most recent antidiabetic; omarigliptin. Three sensors, employing potassium tetrakis (p-chlorophenyl) borate as a lipophilic cation exchanger, were developed and compared. One liquid contact ion-selective electrode and two carbon paste-based solid contact ones, plain one and another one modified with polyaniline nanoparticles, were employed. Performances of fabricated sensors were assessed as per IUPAC recommendations. Incorporation of hydrophobic polyaniline nanoparticles as ion-to-electron transducer layer at solid contact/ion-sensitive membrane interface enhanced sensitivity and stability of the third sensor showing LOD of 2.5×10⁻⁷ mol L⁻¹ and slope of 58.57 mV decade⁻¹. The three sensors were applied for omarigliptin determination in presence of its degradation products, in dosage form and spiked human plasma.     

Ternary Hybrid Perovskite Solid Solution Single Crystals: Growth,Composition Determination and Phase Stability in Highly Moist Atmosphere

Ternary hybrid perovskite solid solutions have shown superior optoelectronic properties and better stability than their ABX₃ simple perovskite counterparts under ambient conditions. However, crystal growth and identification of the accurate composition of these complex crystalline compounds remain challenging, and their stability under extreme conditions such as in highly moist atmosphere is unknown. Herein, large-size (up to 2 cm) single crystals of ternary perovskite 0.80FAPbI₃ ⋅ x′FAPbBr₃ ⋅ y′CsPbI₃ (x′+y′=0.20) are grown. An elemental analysis method based on wavelength dispersive X-ray fluorescence is proposed to determine their accurate compositions. Among these single crystals, the composition with y′=0.12 shows the best moisture stability at 90 % relative humidity for 15 days. Other components with richer or poorer Cs⁺ ions undergo different phase segregation behaviours. The performance and stability of photodetectors based on these single crystals are tested. This work offers a deeper insight into phase stability of ternary hybrid perovskite solid solution crystals in highly moist atmosphere.     

Stability-Indicating HPLC Method for the Determination of Cefcapene Pivoxil

The stability-indicating LC assay method was developed and validated for quantitative determination of cefcapene pivoxil in the presence of degradation products formed during forced degradation studies. An isocratic RP-HPLC method was developed with a Lichrospher RP-18 (250 mm × 4.6 mm, 5 μm) column and the mobile phase composed of 45 volumes of acetonitrile and 55 volumes of mixture composed of citric acid 10 mmol L^?1 and potassium chloride 18 mmol L^?1. The flow rate of the mobile phase was 1 mL min^?1. Detection wavelength was 270 nm and temperature was 30 °C. Cefcapene pivoxil, similar to other cephalosporins, was subjected to stress conditions of degradation in aqueous solutions including hydrolysis, oxidation, and thermal degradation. The method was validated with regard to linearity, accuracy, precision, selectivity, and robustness. The method was applied successfully for the determination of cefcapene pivoxil during kinetic studies in aqueous solutions (pH and thermal degradation) and in solid state (oxidative, thermal, and radiolytic degradation).     

Stability study of α-bromophenylacetic acid: Does it represent an appropriate model analyte for chiral separations?

The stability of α-bromophenylacetic acid (BPAA) in 50% aqueous methanol solution has been tested. CE in different running buffers was used to separate BPAA from the decomposition reaction products α-hydroxyphenylacetic (mandelic) acid and α-methoxyphenylacetic acid. Suitable CE separation of all three compounds and other product, bromide, was achieved in 60 mmol/L formate buffer (pH 3.0) at −30 kV in 50 μm (i.d.) poly(vinyl alcohol)-coated fused silica capillary (30 cm/24.5 cm) with UV detection at 200 nm. The CE method was applied to determine the reaction order of the decomposition of BPAA (0.47 mmol/L) via nucleophilic substitution in 50% aqueous methanol. The first-order reaction kinetics was confirmed by linear and non-linear regression, giving the rate constants 1.52 × 10⁻⁴ ± 2.76 × 10⁻⁵ s⁻¹ and 7.89 × 10⁻⁵ ± 5.02 × 10⁻⁶ s⁻¹, respectively. Additionally, the degradation products were identified by CE coupled to mass spectrometric (MS) detection. The CE–MS experiments carried out in 60 mmol/L formate buffer (pH 3.0) and in 60 mmol/L acetate buffer (pH 5.0) confirmed the results obtained by CE–UV. Furthermore, the stability of BPAA in polar solvents was tested by ¹H NMR experiments. Our results provide strong evidence of the instability and fast degradation of BPAA in 50% aqueous methanol indicating that BPAA is not suitable as the model analyte for chiral separations.     

Development and validation of a stability‐indicating assay including the isolation and characterization of degradation products of metaxalone by LC‐MS

A stability‐indicating reverse‐phase high‐performance liquid chromatography–mass spectrometric method was developed and validated for the assay of metaxalone through forced degradation under acidic, alkaline, photo, oxidative and peroxide stress conditions. Separation of degradation products was accomplished on a reverse‐phase Phenomenex C₁₈ (250 × 4.6 mm, 5 µm) column thermostated at 25°C using 10 mM aqueous ammonium acetate: methanol (35:65 v/v) as mobile phase in an isocratic mode of elution. The eluents were detected at 275 nm by photo diode array detector and mass detectors connected in series. Two unknown base hydrolysis products of metaxalone were identified and characterized as (a) methyl 3‐(3,5‐dimethylphenoxy)‐2‐hydroxypropylcarbamate and (b) 1‐(3,5‐dimethylphenoxy)‐3‐aminopropan‐2‐ol by MS, ¹H NMR and FTIR spectroscopy. The method was validated as per International Conference on Harmonization guidelines and metaxalone was selectively determined in presence of its degradation impurities, demonstrating its stability‐indicating nature. Copyright © 2013 John Wiley & Sons, Ltd.     

An efficient and easily retrievable dip catalyst based on silver nanoparticles/chitosan-coated cellulose filter paper

Re-use of a catalyst is an important task, which is usually achieved by loading it on easily separable supports such as magnetic substrates. However, we demonstrate here the process of easy and fast catalyst separation from a reaction medium by loading it onto an economically feasible and microscopically high surface substrate of filter paper (FP) made up of cellulose microfibers as catalyst support. To achieve the goal, we coated chitosan (CH) on filter paper (CH-FP) to impart a high affinity of the substrate for metal ion absorption. AgNO₃ dissolved in water with a 0.1 M concentration was used as the Ag ion carrier solution, and CH-FP strips with known rectangular dimensions were submerged into it for the metal ion absorption. The metal ion-laden CH-FP strips were dip treated with sodium borohydride (NaBH₄) aqueous solution to prepare Ag-nanoparticle loaded CH-FP (Ag/CH-FP). X-ray diffraction and energy dispersive X-ray spectroscopy confirmed the formation of the Ag/CH-FP hybrid. Ag/CH-FP morphology was examined through scanning electron microscopy analysis, which showed the presence of Ag nanoparticles attached to the cellulose microfibers. The prepared Ag/CH-FP was employed as a dip catalyst for the degradation of nitroarene compounds of 2-nitophenol (2-NP) and 4-nitrophenol (4-NP) by NaBH₄. Remarkably, the rate constants for 4-NP and 2-NP were 3.9 × 10^?3 and 1.7 × 10^?3 s^?1, respectively. In addition, we discussed the ease of the catalyst retrievability from the reaction mixture and its re-usability.     

Enhanced mass transfer during solid–liquid extraction of gamma-irradiated red beetroot

The exposure to gamma-irradiation pretreatment increases cell wall permeabilization, resulting in loss of turgor pressure, which led to the increase of extractability of betanin from red beetroot. The degree of extraction of betanin was investigated using gamma irradiation as a pretreatment prior to the solid–liquid extraction process and compared with control beetroot samples. The beetroot subjected to different doses of gamma irradiation (2.5, 5.0, 7.5, 10.0 kGy) and control was dipped in an acetic acid medium (1% v/v) to extract the betanin. The diffusion coefficients for betanin as well as ionic component were estimated considering Fickian diffusion. The results indicated an increase in the diffusion coefficient of betanin (0.302×10⁻⁹–0.463×10⁻⁹ m²/s) and ionic component (0.248×10⁻⁹–0.453×10⁻⁹ m²/s) as the dose rate increased (from 2.5 to 10.0 kGy). The degradation constant was found to increase (0.050–0.079 min⁻¹) with an increase gamma-irradiation doses (2.5–10.0 kGy), indicating lower stability of the betanin as compared to control sample at 65 °C.     

A new molecularly imprinted polymer for selective extraction and pre‐concentration of guaifenesin in different samples: Adsorption studies and kinetic modeling

This paper describes the synthesis of a molecularly imprinted polymer by chemical oxidation of pyrrole as the functional monomer, and at the presence of guaifenesin as the template. The prepared polymer was used as adsorbent in molecularly imprinted solid‐phase extraction followed by spectrophotometric determination. Different parameters in the solid‐phase extraction including sample pH, adsorbent weight, washing solution, and elution solvent were studied to determine optimum conditions for isolation and enrichment of guaifenesin. The results showed guaifenesin was quantitatively adsorbed on the molecularly imprinted polymer at pH 6.0 and completely eluted with an ethanol–water solution (50% v/v). An enrichment factor of four with satisfactory recoveries (87.0–95.0%) was obtained. The solid‐phase extraction columns could be used for up to six consecutive elution‐loading cycles without significant decreases in the analyte recoveries. The method had a dynamic range of 3.0 × 10^?6–1.5 × 10^?4 mol/L with a limit of detection and limit of quantification of 1.4×10^?6 and 4.5×10^?6 mol/L, respectively. The proposed procedure was used for the extraction and determination of guaifenesin in different pharmaceutical formulations, with satisfying results being achieved.     

Dissipation of chlortetracycline in the aquatic environment: Characterization in terms of a generalized multiphase pseudo–zero-order rate law

The kinetics of the dissipation of chlortetracycline in the aquatic environment was studied over a period of 90 days using microcosm experiments and distilled water controls. The distilled water control experiments, carried out under dark conditions as well as exposed to natural sunlight, exhibited biphasic linear rates of dissipation. The microcosm experiments exhibited triphasic linear rates of degradation both in the water phase (2.7 × 10⁻², 7 × 10⁻³, 1.3 × 10⁻³ μg g⁻¹ day^–1) and the sediment phase (3.4 × 10⁻², 6 × 10⁻³, 1 × 10⁻³ μg g⁻¹ day^–1). The initial slow rate of dissipation in the dark control (3 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation and hydrolysis, whereas the subsequent fast rate (1.8 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation, hydrolysis, and microbial degradation. For the sunlight-exposed control, the initial slow rate of dissipation (1.5 × 10⁻³ μg g⁻¹ day^–1) was attributed to a combination of evaporation, hydrolysis, and photolysis, whereas the subsequent fast rate was attributed to a combination of evaporation, hydrolysis, photolysis, and microbial degradation (5.1 × 10⁻³ μg g⁻¹ day^–1). The initial fast rate of dissipation in the water phase of the microcosm experiment is attributed to a combination of evaporation, hydrolysis, photolysis, and microbial degradation, whereas all subsequent slow rates in the water phase and all rates of degradation in the sediment phase are attributed to microbial degradation of the colloidal and sediment particle adsorbed antibiotic. A multiphase zero-order kinetic model is presented that takes into account (a) dissipation of the antibiotic via evaporation, hydrolysis, photolysis, microbial degradation, and adsorption by colloidal and sediment particles and (b) the dependence of the dissipation rate on the concentration of the antibiotic, type and count of microorganisms, and type and concentration of colloidal particles and sediment particle adsorption sites within a given aquatic environment.     

LC Stability Studies of Voriconazole and Structural Elucidation of Its Major Degradation Product

Voriconazole is a broad spectrum agent used to treat serious fungal infections. Stability studies conducted so far refer to the stability of the injectable formulation in different solvents, packaging materials and on storage but studies on the inherent chemical stability of the drug are not available. The purpose of this study was to evaluate the stability of the drug under stress conditions, in solution and in the solid state; isolate and elucidate the structure of the major degradation product and evaluate the antifungal activity of the degradation products. The quantification of the drug after exposure to degradation conditions was studied by a validated LC method. Among the conditions tested, it was found that the drug is more rapidly degraded in an alkaline medium, exposure to UVC radiation (254 nm) and elevated temperatures (60 °C). Degradation was greater under the first two conditions and in solution. Tablets exposed to UVC radiation for 14 days remained chemically and physically stable. For the isolation of the major degradation product, semi-preparative LC was employed and for the structural elucidation, spectroscopic techniques (¹H and ¹³C NMR spectroscopy, IR spectroscopy and mass spectrometry) were used, and the major degradation product identified as 1-(2,4-difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)-1-ethanone. The degraded samples were evaluated through microbiological assay and found to have no antifungal activity.     

A Sensitive Flow Injection Fluorimetry for the Determination of Carbamazepine in Human Plasma

Abstract

A simple, sensitive, and specific flow injection fluorimetric method has been developed for the determination of carbamazepine (CBZ). The proposed method is based on use of a solid‐phase reactor containing lead dioxide for on‐line oxidization of CBZ into a strongly fluorescent compound in a medium of phosphoric acid. The product has a green‐yellow fluorescence at a maximum excitation wavelength of 355 nm and an emission wavelength of 478 nm. Under the optimum conditions, the fluorescence intensity is proportional to the concentration of CBZ ranging from 0.0005 to 4.000 µg mL^?1. The detection limit is 5.7×10^?5 µg mL^?1 (2.4×10^?10 mol L^?1) and the relative standard deviation is 1.4% at the sampling rate of 45 h^?1. The proposed method has been applied to clinical estimation of CBZ in real patients' plasma samples with the results compared with those obtained by HPLC method.     

Redox Mediated Synthesis of Ag-CuO Hybrid Nanoparticles – DNA/BSA Binding Studies and in vitro Evaluation of Anti-cancer Activity on MCF-7 Cancer Cell Line

We herein report a nanoparticle-directed therapeutic approach to breast cancer using Ag-CuO hybrid nanoparticles. The nanoparticles were synthesized through redox-mediated process involving reduction of silver ion on the surface of Cu₂O nanostructures. Structural, microstructural and optical characterization were carried out and the hybrid nanoparticles were found to be phase pure with crystallite size between 100–200 nm and the absorption due to surface plasmon resonance from silver was observed around 460 nm. The binding affinities of the hybrid nanoparticles with the plasma protein BSA and calf thymus DNA were studied and the respective binding constants were found to be 5.1 × 10⁴ and 1.12 × 10⁵ M⁻¹ showing appreciable binding affinity of the substrate. The cytotoxicity of the as-synthesized hybrid nanoparticles induced in breast cancer cells was evaluated in vitro and the obtained results demonstrates the potential anti-cancer activity of the Ag-CuO hybrid nanoparticles against the MCF-7 breast cancer cell line.     

Enhancing dielectric and mechanical behaviors of hybrid polymer nanocomposites based on polystyrene,polyaniline and carbon nanotubes coated with polyaniline

The dielectric and mechanical properties of hybrid polymer nanocomposites of polystyrene/polyaniline/carbon nanotubes coated with polyaniline(PCNTs) have been investigated using impedance analyzer and extensometer. The blends of PS/PANI formed the heterogeneous phase separated morphology in which PCNTs are dispersed uniformly. The incorporation of a small amount of PCNTs into the blend of PS/PANI has remarkably increased the dielectric properties. Similarly, the AC conductivity of PS/PANI is also increased five orders of magnitude from 1.6 × 10~(-10) to 2.0 × 10~(-5) S·cm~(-1) in the hybrid nanocomposites. Such behavior of hybrid nanocomposites is owing to the interfacial polarization occurring due to the presence of multicomponent domains with varying conductivity character of the phases from insulative PS to poor conductor PANI to highly conductive CNTs. Meanwhile, the tensile modulus and tensile strength are also enhanced significantly up to 55% and 160%, respectively, without much loss of ductility for three phase hybrid nanocomposites as compared to the neat PS. Thereby, the hybrid nanocomposites of PS/PANI/_P CNTs become stiffer, stronger and tougher as compared to the neat systems.     

Development of selective comprehensive two-dimensional liquid chromatography with parallel first-dimension sampling and second-dimension separation—application to the quantitative analysis of furanocoumarins in apiaceous vegetables

Various implementations of two-dimensional high-performance liquid chromatography are increasingly being developed and applied to the analysis of complex materials, including those encountered in the analysis of foods, beverages, and nutraceuticals. Previously, we introduced the concept of selective comprehensive two-dimensional liquid chromatography (sLC?×?LC) as a hybrid between the more conventional, but extreme opposite sampling modes of heartcutting (LC–LC) and fully comprehensive (LC?×?LC) 2D separation. The sLC?×?LC approach breaks the link between first dimension (¹D) sampling time and second dimension (²D) analysis time that is faced in LC?×?LC and allows very rapid (as low as 1 s) sampling of highly efficient ¹D separations, while at the same time allowing efficient ²D separations on the timescale of tens of seconds. In this paper, we improve upon our previous sLC?×?LC work by demonstrating the ability to perform the processes of ¹D sampling and ²D separation in parallel. This significantly improves the flexibility of the technique and allows targeted analysis of analytes that elute close together in time in the ¹D separation. To demonstrate the value of this added capability, we have developed a sLC?×?LC method using multi-wavelength ultraviolet absorbance detection for the quantitative analysis of six target furanocoumarin compounds in extracts of celery, parsley, and parsnips. We show that ²D separations of ¹D effluent containing the target compounds of interest reveal the presence of unanticipated interferent peaks that would otherwise compromise the quantitative accuracy of the method. We also demonstrate the application of the chemometric method iterative key set factor analysis with alternating least-squares to sLC?×?LC to mathematically resolve target compounds that are only slightly separated chromatographically but not sufficiently resolved for accurate quantitation.     

Stability‐indicating ultra‐performance liquid chromatography method for the estimation of thymoquinone and its application in biopharmaceutical studies

Thymoquinone (THQ) is known for its neuroprotective and anti‐convulsant properties in preclinical studies. We herewith describe a simple, rapid, selective, sensitive and stability‐indicating UPLC method for the estimation of THQ and its application to biopharmaceutical studies such as in vitro release from nanoparticulate system and in vivo pharmacokinetic study. The method employed gradient elution using a Waters Acquity HSS‐T3 C₁₈ (100 × 2.1 mm, 1.8 µm) UPLC column. The mobile phase consisted of water and acetonitrile, pumped at a flow rate of 0.5 mL/min. The injection volume was 5 µL and THQ was monitored at 294 nm wavelength with a total run time of 6 min. In solution as well as in plasma, the method was found to be linear (r ≥ 0.998), precise (CV ≤ 2.45%) and accurate (recovery ≥ 84.8%) in the selected concentration range of 0.1–0.8 µg/mL. Forced degradation studies revealed that THQ undergoes degradation under acidic, basic, oxidation and UV light stress conditions. However, the developed UPLC method could effectively resolve degradation product peaks from THQ. Further, no interference was found at the retention time of THQ from any plasma components, indicating selectivity of the developed method. For solutions, the limits of detection and quantitation of the method were found to be 0.001 and 0.0033 µg/mL, respectively; while in plasma they were 0.006 and 0.02 µg/mL, respectively. The validated method was successfully applied to quantify THQ in dissolution medium as well as oral in vivo pharmacokinetic study of THQ suspension and THQ‐ solid lipid nanoparticle (THQ‐SLN) formulation. A 2‐fold increase in the relative bioavailability was observed with the THQ‐SLN compared with THQ. The results indicate that the SLN significantly increased plasma concentrations and retention within the systemic circulation. Copyright © 2010 John Wiley & Sons, Ltd.     

Spectrophotometric Determination of Gold in Water and Ore with 2‐Carboxyl‐1‐Naphthalthiorhodanine

Abstract

This paper reports on the synthesis of a new chromogenic reagent, 2‐carboxyl‐1‐naphthalthiorhodanine (CNTR). A high sensitive, selective, and rapid method for the determination of gold based on the rapid reaction of gold with CNTR and the solid phase extraction of the colored chelate with a reversed phase polymer‐based C₁₈ cartridge was developed. In the presence of 0.05–0.5 mol L^?1 of phosphoric acid solution and emulsifier‐OP medium, CNTR reacts with gold to form a red chelate of a molar ratio 1∶3 (gold to CNTR). This chelate was enriched by the solid phase extraction with a polymer‐based C₁₈ cartridge and the retained chelate was eluted from the cartridge with dimethyl formamide (DMF). The enrichment factor of 100 was achieved. In the DMF medium, the molar absorptivity of the chelate is 1.35×10⁵ L · mol^?1 · cm^?1 at 540 nm. Beer's law is obeyed in the range of 0.01～2 µg mL^?1 in the measured solution. The relative standard deviation for 11 replicates sample of 0.5 µg L^?1 level is 2.05%. The detection limit, based on three times the standard deviation is 0.02 µg L^?1 in the original sample. This method was applied to the determination of gold in water and ore with good results.     

An Approach to Transfer Methods from HPLC to UHPLC Techniques in Some Carbapenems

Stability-indicating LC methods were developed and validated for the quantitative determination of doripenem, meropenem and tebipenem in the presence of their degradation products formed during forced degradation studies. Isocratic HPLC and UHPLC separations were performed with a core–shell Kinetex 1.7, 2.6 and 5 µm, all C18, 100A, 100 × 2.1 mm columns and the mobile phase composed of acetonitrile and 12 mmol L⁻¹ ammonium acetate in different ratios. The flow rates of the mobile phase were: 0.5 mL min⁻¹ for 1.7 µm column, and 1.0 mL min⁻¹ for 2.6 and 5 µm ones. Detection wavelength was 298 nm and temperature was set at 30 °C. All analysed drugs were exposed to stress conditions which caused their hydrolysis and thermal degradation. The methods were validated by evaluation of linearity, accuracy, precision, selectivity and robustness. Proposed methods were successfully applied for the determination of investigated antibiotics during kinetic studies in aqueous solutions and in the solid state. The advantages of chromatographic procedures which are based on the use of C18 stationary phases with different particle sizes in the analysis of selected carbapenems were discussed.

     

Simultaneous Determination of Impurities in Ropinirole Tablets by an Improved HPLC Method Coupled with Diode Array Detection

A gradient HPLC method coupled with diode array detection was developed and fully validated for the analysis of impurities in ropinirole using a Kromasil^® C8 100 Å (250 × 4.6 mm, 5 μm) column with a flow rate 1.0 mL min^?1 and detection at 250 nm. The mobile phase component A consisted of a mixture of 19.6 mM aqueous potassium dihydrogen phosphate–acetonitrile (98:2 v/v), pH adjusted to 7.0 with triethylamine and the mobile phase component B consisted of acetonitrile. The method was validated in terms of linearity, sensitivity, precision, accuracy and stability. The calibration curves for ropinirole and its five impurities showed good linearity (r > 0.998) within the calibration ranges tested. The intra- and inter-day RSD values were <3.9 %, while the relative percentage error E _r was <5.8 % for all compounds. Accelerated stability studies performed under various stress conditions including oxidation, hydrolysis and UV light irradiation at 254 nm proved the selectivity of the procedure. Long-term stability studies performed on blistered tablets and under various conditions of heat and humidity indicate the presence of four of the studied impurities in less than 0.07 %. The method was applied successfully to the detection and determination of ropinirole impurities in pharmaceutical formulations.     

Development and validation of a reversed‐phase high‐performance liquid chromatographic method with solid‐phase extraction for the quantification of hydrochlorothiazide in ex vivo permeation studies

Hydrochlorothiazide (HCT) is a diuretic used to treat hypertension. In order to study its intestinal permeation behavior applying an ex vivo methodology, a rapid, sensitive and selective reversed‐phase liquid chromatography (RP‐HPLC) method coupled with UV detection (RP‐HPLC UV) was developed for the analysis of HCT in TC199 culture medium used as mucosal and serosal solutions in the everted rat intestinal sac model. Also, analytical procedures for the quantification of HCT by RP‐HPLC with UV detection required a sample preparation step by solid‐phase extraction. The method was validated in the concentration range of 8.05 × 10⁻⁷ to 3.22 × 10⁻⁵ m for HCT. Chromatographic parameters, namely carry‐over, lower limit of quantification (1.4491 × 10⁻⁷ m ), limit of detection (3.8325 × 10⁻⁸ m ), selectivity, inter‐ and intraday precision and extraction recovery, were determined and found to be adequate for the intended purposes. The validated method was successfully used for permeability assays across rat intestinal epithelium applying the ex vivo everted rat gut sac methodology to study the permeation behavior of HCT.     

Transport of U(VI) from sulphuric acid medium across supported liquid membrane (SLM) containing di-(2-ethylhexyl) phosphoric acid (D2EHPA)/n-dodecane as a carrier

This paper reports on the supported liquid membrane (SLM) based transport studies of U(VI) from sulphate medium using di-(2-ethylhexyl) phosphoric acid/n-dodecane as carrier. Polytetrafluoroethylene membrane was used as solid support and H₂SO₄ as receiver phase. The effects of various parameters such as receiver phase concentration, feed acidity, carrier concentration, U(VI) concentration, membrane thickness and membrane pore size on U(VI) transport had been investigated. With increase in H₂SO₄ concentrations and pH of feed solution there is an increase in U(VI) transport across the SLM. Similarly with increase in membrane thickness the U(VI) transport decrease whereas in case of pore size variation reverse results are obtained. The membrane thickness variation results showed that the U(VI) transport across the SLM is entirely diffusion controlled and the diffusion coefficient the D _(o) was calculated as 1.36 × 10^?7 cm² s^?1. Based on optimized condition, a scheme had been tested for selective recovery of U(VI) from ore leach solution containing a large number of other metal ions.