Synthesis of thiol functionalized poly(meth)acrylates through enzymatic catalysis and a subsequent one pot reaction process

The synthesis and modification of thiol functionalized poly(meth)acrylates using a straightforward reaction concept that consists of an enzymatically catalyzed monomer synthesis, free radical polymerization and post-polymerization modification is presented. The well-known enzymatic transacylation of methyl acrylate and methyl methacrylate that runs under mild and environmentally friendly conditions was used to synthesize thiol protected acrylic and methacrylic monomers. Upon free radical polymerization and subsequent removal of protection groups, polymers with pendant thiol groups are obtained, which, in turn, can react in situ with Michael acceptors to form thiol-ene reaction products. The exceptional advantage of the proposed method is that upon removal of the enzyme from the monomer mixture, the polymerization, deprotection of thiols and subsequent Thio-Michael-type addition reaction can be conducted in one pot without purification of the intermediate products. Furthermore, the different reactivities of acetyl and benzoyl protection groups in lipase catalyzed reactions are discussed.     

Synthesis of S-glycosyl amino acids and S-glycopeptides via photoinduced click thiol-ene coupling

We report on the photoinduced addition of glycosyl thiols to alkenyl glycines (thiol-ene coupling) to give S-glycosyl amino acids in high yields (53-90%). One of the amino acids thus prepared was used in the construction of a tripeptide via solution phase chemistry. Moreover, a one-pot two-step approach to an S-glycopeptide was developed using glutathione (GSH) as model starting material. This approach involved GSH S-alkenylation followed by photoinduced hydrothiolation by a glycosyl thiol.     

Effects of thiol monomers on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Nucleophile-initiated thiol-ene click reaction is a highly novel and efficient method of preparing polymer-dispersed liquid crystal (PDLC) films. The effects of thiol monomers on the electro-optical properties of PDLC films prepared by nucleophile-initiated thiol-ene click reaction were investigated in this work. The thiol monomers were dithiol, trithiol, tetrathiol or their mixture. It was found that the increase of functionality could lead to the increase of threshold voltage and saturation voltage and the decrease of off-state transmittance. The influence of reaction temperature was also investigated. The results indicated that functionality and reaction temperature had combined effects on the electro-optical properties of PDLC films.     

Effects of thiol-ene click reaction on morphology and electro-optical properties of polyhedral oligomeric silsesquioxane nanostructure-based polymer dispersed liquid crystal film

Polymer dispersed liquid crystals (PDLCs) have lit a flash of interest due to the distinctive property of electrically controlled switching. However, too high-driving voltage associated with porous polymer networks always limit their wider range of applications. Herein, we reported a PDLC system containing LCs, 2,2′-(Ethylenedioxy)diethanethiol (DET) with thiol groups, cage-like nanostructure acrylic polyhedral oligomeric silsesquioxane (KH570-POSS) and KH570-SiO₂ nanoparticle modified by acrylic groups. The cage-like KH570-POSS microstructure was injected to the polymer matrix when KH570-POSS reacted with DET via thiol-ene click reaction. The morphological results demonstrated that the droplet size increased with the higher content of DET due to the decrease of the crosslink between the acrylic groups in KH570-POSS, which results in a less dense of polymer network and thus make the LC droplets easier to be driven in the electric filed. Then, a silica-based nanoparticle KH570-SiO₂ modified by acrylic groups was introduced into the system. The results indicated that KH570-SiO₂ could replace partial KH570-POSS to form the polymer network via thiol-ene click reaction, which increased the compatible ability of SiO₂ nanoparticles in the as-made film. The contrast ratio was increased to 165 when there was nearly 5 wt% content of KH570-SiO₂. Besides, the driving voltage was reduced by almost 60% and the sample could be fully driven by 30 V which is lower than the safe voltage (36 V). This study opens a route for the preparation of commercial PDLC films by thiol-ene click reaction, enabling the creation of low-voltage-driven smart windows.     

Synthesis of poly(methyl methacrylate-co-styrene)-block-polysulfide-block-poly(methyl methacrylate-co-styrene) copolymers by free radical polymerization combined with oxidative coupling

Poly(methyl methacrylate-co-styrene)-block-polysulfide-block-poly(methyl methacrylate-co-styrene) triblock copolymers were synthesized for the first time by the free radical copolymerization of methyl methacrylate (MMA) and styrene (St) in the presence of a thiocol oligomer as a chain transfer agent, followed by chemical oxidation of the remaining SH-end groups. The apparent chain transfer constant of the thiocol SH groups in the copolymerization reaction was estimated from the rate of consumption of the thiol groups versus the overall rate of consumption of the monomers (C_T = 1.28). Based on this value, the chain transfer constant of the thiocol SH groups in St polymerization was calculated . The triblock copolymers synthesized were characterized by SEC and ¹H NMR measurements.     

Thiol-Ene Cationic and Radical Reactions: Cyclization,Step-Growth,and Concurrent Polymerizations for Thioacetal and Thioether Units

Thiol-ene cationic and radical reactions were conducted for 1:1 addition between a thiol and vinyl ether, and also for cyclization and step-growth polymerization between a dithiol and divinyl ether. p-Toluenesulfonic acid (PTSA) induced a cationic thiol-ene reaction to generate a thioacetal in high yield, whereas 2,2′-azobisisobutyronitrile resulted in a radical thiol-ene reaction to give a thioether, also in high yield. The cationic and radical addition reactions between a dithiol and divinyl ether with oxyethylene units yielded amorphous poly(thioacetal)s and crystalline poly(thioether)s, respectively. Under high-dilution conditions, the cationic and radical reactions resulted in 16- and 18-membered cyclic thioacetal and thioether products, respectively. Furthermore, concurrent cationic and radical step-growth polymerizations were realized using PTSA under UV irradiation to produce polymers having both thioacetal and thioether linkages in the main chain.     

Vinyl functionalized silica hybrid monolith-based trypsin microreactor for on line digestion and separation via thiol-ene "click" strategy

A novel thiol-ene "click" strategy for the preparation of monolithic trypsin microreactor was proposed. The hybrid organic-inorganic monolithic capillary column with ene-functionality was fabricated by sol-gel process using tetramethoxysilane (TMOS) and γ-methacryloxypropyltrimethoxysilane (γ-MAPS) as precursors. The disulfide bonds of trypsin were reduced to form free thiol groups. Then the trypsin containing free thiol groups was attached on the γ-MAPS hybrid monolithic column with ene-functionality via thiol-ene click chemistry to form a trypsin microreactor. The activity of the trypsin microreactor was characterized by detecting the substrate (Nα-p-tosyl-L-arginine methyl ester hydrochloride, TAME) and the product (Nα-p-tosyl-L-arginine, TA) with on-line capillary zone electrophoresis. After investigating various synthesizing conditions, it was found that the microreactor with poly(N,N'-methylenebisacrylamide) as spacer can deliver the highest activity, yielding a rapid reaction rate. After repeatedly sampling and analyzing for 100 times, the monolithic trypsin microreactor still remained 87.5% of its initial activity. It was demonstrated that thiol-ene "click" strategy for the construction of enzyme microreactor is a promising method for the highly selective immobilization of proteins under mild conditions, especially enzymes with free thiol radicals.     

Synthesis and nanoimprinting of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry

This work demonstrates the UV nanoimprinting lithography (UV-NIL) of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry. Herein, 9,9-bis(3-mercaptopropylphenylether)fluorene (BMPF) is designed as a new thiol monomer with a high refractive index, high transparency, and good processability for UV-NIL. Colorless polythioethers are synthesized from BMPF and ene monomers under mild thiol-ene click reaction conditions. Excellent transmittance (96%) of 400 nm light is observed in all the polymer films and high refractive index values of 1.5972–1.6382 are attained. UV-NIL using thiol-ene photopolymerization affords polymer nanoimprinting patterns with various features on the order of 100–500 nm without any fractures. To the best of our knowledge, this is the first report on UV-NIL of high refractive index and highly transparent polymers. Through proper monomer and polymer design, novel polythioethers with suitable glass transition temperature (T _g) values are developed with high refractive index, high transparency, and good UV-NIL processability. Furthermore, UV-NIL based on thiol-ene click chemistry is accomplished at the nanoscale. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2175–2182     

Sm(OTf)3 as a highly efficient catalyst for the synthesis of 2,3-unsaturated O- and S-pyranosides from glycals and the temperature-dependent formation of 4-O-acetyl-6-deoxy-2,3-unsaturated S-pyranosides and 4-O-acetyl-6-deoxy-3-alkylthio glycals

By using Sm(OTf)₃ as the catalyst, synthesis of 2,3-unsaturated-glycosides has been performed. A series of 2,3-unsaturated glycosides were obtained from 3,4,6-tri-O-acetyl–d-glucal or 3,4-di-O-acetyl-l-rhamnal under mild reaction conditions in good yield and high anomeric selectivity. It was found that under certain conditions, reaction of 3,4-di-O-acetyl-l-rhamnal with thiol leads to temperature-dependent formation of C-1-S and C-3-S product. A temperature-dependent profile of the yield of these two products is given.     

Photothermal degradation of copolymers of methyl methacrylate and n-butyl acrylate

The photothermal degradation of copolymers of methyl methacrylate (MMA) and n-butyl acrylate (n-BuA) covering the whole composition range has been studied at 165°.The gaseous products, which are relatively minor, are hydrogen, carbon monoxide and methane. The liquid products are predominantly MMA, with n-BuA, n-butanol and n-butyraldehyde as minor products. Infra-red spectral changes in the residue were attributed to lactone formation and associated with butanol formation as in the purely thermal reaction The “cold ring” or chain fragment fraction becomes increasingly more abundant as the n-BuA content of the copolymer is increased.All the products and principal features of the reaction are explained in terms of a radical process which is initiated by scission of pendant acrylate units and is propagated by a combination of depropagation and intra- and intermolecular transfer processes, the relative importance of which depends upon copolymer composition. Differences from the thermal reaction and the corresponding reaction in copolymers of methyl methacrylate and methyl acrylate are discussed.     

Synthesis, characterization and thermal properties of small R2R2NX-type quaternary ammonium halides

Twenty-one R₂R^′₂N⁺X⁻ -type (R=methyl or ethyl, R^′=alkyl, X=Br or I) quaternary ammonium (QA) halides have been prepared by using a novel one-pot synthetic route in which a formamide (dimethyl-, diethylformamide, etc.) is treated with alkyl halide in the presence of sodium or potassium carbonate. The formation of QA halides was verified with ¹H-NMR, ¹³C-NMR, MS and elemental analysis. The crystal structures of four QA halides (two bromide and two iodide) were determined using X-ray single crystal diffraction, and the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. The thermal properties of all compounds were studied using TG/DTA and DSC methods. The smallest compounds decomposed during or before melting. The decreasing trend of melting points was observed when the alkyl chain length was increased. The liquid ranges of 120-180 °C were observed for compounds with 5-6 carbon atoms in the alkyl chain. The low melting points and wide liquid ranges suggest potential applicability of these compounds for example as ionic liquids precursors.     

Hydrated ferric sulfate catalyzed synthesis of 3-[(alkyl/arylthio)(aryl)methyl]-1H-indole derivatives through one-pot reaction

A wide variety of 3-[(alkyl/arylthio)(aryl)methyl]-1H-indole derivatives (4a–z) were synthesized through a one-pot three-component reaction from indoles, aromatic aldehydes, and thiols at room temperature using hydrated ferric sulfate as a Lewis acid catalyst. The key features of the present protocol are mild and simple reaction procedure, moderate to good yields, requirement of inexpensive and reusable catalyst, no formation of dithioacetals derivatives from the corresponding aldehydes as well as bis-(indolyl) methane derivatives.     

Addition of thiol-ended polystyrene to acrylates

Polystyrene containing end thiol groups has been prepared via the aminolysis or alcoholysis of its trithioester under conditions established previously for the model reaction of bis(1-phenylethyl) trithiocarbonate. The aminolysis of polystyrene with M _n = 8.2 × 10³ by n-hexylamine at 100°C in toluene led to the formation of a polymer with M _n = 4 × 10³ and a polydispersity coefficient of 1.13. The unimodal molecular-mass distribution of the polymer and its narrow polydispersity that is nearly equal to the initial polydispersity suggest that all trithiocarbonate groups of the starting polystyrene are involved in hydrolysis. The addition of 1-phenylethylthiol and thiol-ended polystyrene to methyl acrylate and methyl methacrylate via the Michael hydrolysis has been studied, and it has been demonstrated that the addition proceeds quantitatively at room temperature. The addition may be directly implemented with the use of dithioesters in the presence of the catalytic amount of a base; therefore, the stage of thiol synthesis can be eliminated. For the quantitative addition to acrylates, the preliminary hydrolysis of the polymer is however preferable.     

One-pot synthesis of hyperbranched poly(amido amine) clicked with a sugar shell via Michael addition polymerization and thiol click reaction

This paper reports the production of glycopolymers via a simple and flexible method. A novel glycopolymer with a hyperbranched poly(amido amine) core and a sugar shell (HPAA-GLc) was synthesized by using thiol-ene click reaction via facile one-pot method. Hyperbranched poly(amido amine) with vinyl terminals was first synthesized by Michael addition polymerization of N,N′-methylene bisacrylamide (MBA) with 1-(2-aminoethyl) piperazine (AEPZ). Subsequently, thiol-ene click reaction between vinyl units of hyperbranched poly(amido amine) and thio-glucose was performed in situ. Based on the NMR result, all the vinyl groups reacted with thiol-glucose in 120 min. Strong photoluminescence emission was observed from the aqueous solution of HPAA-GLc.     

cis/trans-Isochromanones. DMAP induced cycloaddition of homophthalic anhydride and aldehydes

Homophthalic anhydride (1) reacts with wide variety of aromatic aldehydes, in the presence of chloroform and DMAP (N,N-dimethyl-4-amino-pyridine) at room temperature, to give in high yields cis- and trans-1-oxo-isochroman-4-carboxylic acids. Under these conditions, the trans-isomer is predominant and formation of Perkin-type products was not observed in contrast to the reaction carried out in the presence of pyridine. The unexpected trans-6-oxo-11-thiophen-2-yl-11,12-dihydro-6H-dibenzo[c,h]chromene-12-carboxylic acid methyl ester (8) was isolated when the reaction between 1 and thiophene-2-carbaldehyde was carried out in pyridine.     

Photoinitiated Thiol-ene Reactions of Enoses: A Powerful Tool for Stereoselective Synthesis of Glycomimetics with Challenging Glycosidic Linkages

Thioglycosides and C-glycosides represent pharmacologically useful classes of glycomimetics that possess a high degree of biological stability. One emerging tool for the stereoselective synthesis of thioglycosides is the photoinitiated addition of thiols to unsaturated sugars. Moreover, thiyl radical-mediated reactions of exo-glycals and 1-substituted endo-glycals offer facile routes to β-C-glycosidic structures. This Concept article summarizes the thiol-ene coupling strategies developed recently by our group and Somsák's group for the synthesis of several kinds of glycomimetics which are difficult to synthesize by conventional methods. One unusual characteristic of the thiol-ene reactions of endo-glycals is that heating inhibits, whereas cooling promotes the reaction. This unique temperature dependence as well as the effects of the enose structures and thiol configurations on the efficacy and stereoselectivity of the reactions are also discussed.     

Chemistry of odorants: stereoselective synthesis of octahydronaphthalene-based perfumery Georgywood, (+,−)-1-[(1R,2S)-1,2,3,4,5,6,7,8-octahydro-1,2,8,8-tetramethylnaphthalen-2-yl]ethan-1-one

A straightforward synthesis of octahydronaphthalene-based fragrance, such as Georgywood, is described. The Lewis acid tin (IV) chloride catalyzed efficiently an original one-pot sequential cycloaddition-clyclization process by reaction of myrcene with 3-bromo-but-3-en-2-one, leading directly to the octahydronaphthalene skeleton in very good yields (85%). Then, dehydrohalogenation with DBU gave the key 2,4-dienone intermediate in excellent yield (85%). Regioselective Michael addition gave rise to the formation of the addition product as a trans/cis diastereoisomeric mixture, by reaction either with CH₃Cu·BF₃ (6:1 ratio, 70%) or (CH₃)₂CuLi/TMSCl reagents (3:1 ratio, 80%). The generation of thermodynamically more stable enolate by treatment of the diastereoisomeric mixture with sodium hydride in tetrahydrofuran in the presence of an excess of methyl iodide, allowed stereoselective introduction of the methyl group at C2, leading to the formation of Georgywood in good yield (60%), as the only diastereoisomer, with a trans stereochemistry of the two methyl groups as demonstrated by NMR experiments.     

Biobased Polymers via Radical Homopolymerization and Copolymerization of a Series of Terpenoid-Derived Conjugated Dienes with exo-Methylene and 6-Membered Ring

A series of exo-methylene 6-membered ring conjugated dienes, which are directly or indirectly obtained from terpenoids, such as β-phellandrene, carvone, piperitone, and verbenone, were radically polymerized. Although their radical homopolymerizations were very slow, radical copolymerizations proceeded well with various common vinyl monomers, such as methyl acrylate (MA), acrylonitrile (AN), methyl methacrylate (MMA), and styrene (St), resulting in copolymers with comparable incorporation ratios of bio-based cyclic conjugated monomer units ranging from 40 to 60 mol% at a 1:1 feed ratio. The monomer reactivity ratios when using AN as a comonomer were close to 0, whereas those with St were approximately 0.5 to 1, indicating that these diene monomers can be considered electron-rich monomers. Reversible addition fragmentation chain-transfer (RAFT) copolymerizations with MA, AN, MMA, and St were all successful when using S-cumyl-S’-butyl trithiocarbonate (CBTC) as the RAFT agent resulting in copolymers with controlled molecular weights. The copolymers obtained with AN, MMA, or St showed glass transition temperatures (T_g) similar to those of common vinyl polymers (T_g ~ 100 °C), indicating that biobased cyclic structures were successfully incorporated into commodity polymers without losing good thermal properties.     

Keratinolytic enzyme-mediated biodegradation of recalcitrant feather by a newly isolated Xanthomonas sp. P5

We isolated and characterized a novel feather-degrading Xanthomonas sp. P5 with keratinolytic activity. In improved medium containing 0.1% (w/v) feather, maximal keratinolytic activity was observed at 5 days (69.0 ± 0.6 U/mL). This value was 7.1-fold higher than the yield in basal feather medium. The strain P5 degraded feather completely after 7 days. Feather degradation resulted in free thiol group, soluble protein and amino acids formation, indicating that sulfitolysis and proteolysis may be responsible for feather degradation by the strain P5. Total free amino acid concentration in the cell-free supernatant was around 188.6 μM. Asparagine, methionine, histidine and threonine were the major amino acids released in the culture. Xanthomonas sp. P5 exhibited multiple plant growth-promoting attributes such as siderophore, indoleacetic acid, ammonia, hydrolytic enzyme and antifungal activity. Our results indicate that Xanthomonas sp. P5 could be not only used to upgrade the nutritional value of recalcitrant feather waste but is also a potential candidate for the development of biofertilizer or biocontrol agent applicable to crop plant soil.     

Bismuth triflate-catalyzed rearrangement of acetates of the Baylis-Hillman adducts into (E)-trisubstituted alkenes

In the presence of a catalytic amount of bismuth triflate, methyl 3-acetoxy-3-aryl-2-methylenepropanoates and 3-acetoxy-3-aryl-2-methylenepropanitriles were smoothly converted into methyl (2E)-2-(acetoxymethyl)-3-arylprop-2-enoates and (2E)-2-(acetoxymethyl)-3-arylprop-2-enenitriles, respectively. A remarkable reversal in stereochemical directions from ester to nitrile was observed. 3-Aryl-3-hydroxy-2-methylenepropanoates and 3-aryl-3-hydroxy-2-methylenepropanitriles could be easily obtained as Baylis-Hillman adducts from methyl acrylate and acrylonitrile, respectively. The overall process is an efficient isomerization of the Baylis-Hillman adducts to the corresponding cinnamyl derivatives. The isomerization reaction proceeded rapidly and afforded smoothly the cinnamyl acetates in moderate to very good yields using catalytic amounts of Bi(OTf)₃·4H₂O (10 mol %).