Helix-sense-selective polymerization of phenyl[bis(2-pyridyl)]methyl methacrylate and chiral recognition ability of the polymer

A novel monomer, phenyl[bis(2-pyridyl)]methyl methacrylate (PB2PyMA), was synthesized. The solvolysis rate of PB2PyMA measured in CDCl₃–CD₃ OD [1/1 (v/v)] by ¹H-NMR spectroscopy at 35°C was much smaller than those of triphenylmethyl methacrylate (TrMA) and diphenyl-2-pyridylmethyl methacrylate (D2PyMA). PB2PyMA was anionically polymerized with the complexes of organolithiums with (?)-sparteine (Sp), (S,S)-(+)-and (R,R)?(-)-2,3-dimethoxy-1,4-bis(dimethylamino)butanes[(+)-and (?) -DDB], and (S)-(+)-1-(2-pyrrolidinylmethyl) pyrrolidine (PMP) in toluene at low temperature. The polymers obtained with Sp and DDB complexes showed low optical activity. PMP complexes, particularly that with N,N′-diphenylethylenediamine monolithium amide, were effective in synthesizing a polymer of high optical rotation ([α]²⁵₃₆₅ ～ +1350°) which was comparable to those of poly(TrMA) and poly(D2PyMA) with one-handed helical structure. The optical rotation of poly(PB2PyMA) in a mixture of CHCl₃ and 2,2,2-trifluoroethanol (9/1, v/v) slowly decreased with time. Optically active poly(PB2PyMA) coated on macroporous silica gel was able to resolve racemic compounds as a chiral stationary phase for high-performance liquid chromatography. © 1993 John Wiley & Sons, Inc.     

Helix-sense-selective copolymerization of phenyl[bis(2-pyridyl)]methyl methacrylate,diphenyl(2-pyridyl)methyl methacrylate and triphenylmethyl methacrylate with chiral anionic initiators

Optically active poly[triphenylmethyl methacrylate-co-phenyl[bis(2-pyridyl)]methyl methacrylate] (poly[TrMA-co-PB2PyMA], poly[diphenyl(2-pyridyl)methyl methacrylate-co-phenyl[bis(2-pyridyl)]methyl methacrylate] (poly[D2PyMA-co-PB2PyMA]), and poly[triphenylmethyl methacrylate-co-diphenyl(2-pyridyl)-methyl methacrylate] (poly[TrMA-co-D2PyMA]) were prepared by helix-sense-selective copolymerization with complexes of organolithium with (−)-sparteine [(−)Sp],(S, S)-(+)- and (R, R)-(−)-2,3-dimethoxy-1,4-bis(dimethylamino)butane [(+)- and (−)DDB], and (S)-(+)-2-(1-pyrrolidinylmethyl)pyridine [(+)PMP] as anionic initiators in toluene at low temperature. The copolymers obtained with (−)Sp and (+)DDB or (−)DDB complexes of organolithium showed low optical activity, but to [(+)PMP] complex with N,N′-diphenyleneamine monolithium amide [(+)PMP–DPEDA–Li)] was effective in synthesizing copolymers of high optical rotation ([α] about +320 to + 370°) which were comparable to those of corresponding homopolymers with one-handed helical structure. The optical rotations of poly[TrMA-co-PB2PyMA] and poly[TrMA-co-D2PyMA] were much more stable than that of poly(D2PyMA) or poly(PB2PyMA) in a solution of CHCl₃–2,2,2-trifluoroethanol (10 : 1, v/v) at 25°C, but optical rotation of poly[D2PyMA-co-PB2PyMA] slowly decreased with time in the same conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2127–2133, 1998     

Synthesis of a novel liquid crystal rod–coil star block copolymer consisting of poly(methyl methacrylate) and poly{2,5‐bis[(4‐methoxy‐phenyl)oxycarbonyl] styrene} via atom transfer radical polymerization

A bromine capped star‐shaped poly(methyl methacrylate) (S‐PMMA‐Br) was synthesized with CuBr/sparteine/PT‐Br as a catalyst and initiator to polymerize methyl methacrylate (MMA) according to atom transfer radical polymerization (ATRP). Then, with S‐PMMA‐Br as a macroinitiator, a series of new liquid crystal rod–coil star block copolymers with different molecular weights and low polydispersity were obtained by this method. The block architecture {coil‐conformation of the MMA segment and rigid‐rod conformation of 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl] styrene segment} of the four‐armed rod–coil star block copolymers were characterized by ¹H NMR. The liquid‐crystalline behavior of these copolymers was studied by differential scanning calorimetry and polarized optical microscopy. We found that the liquid‐crystalline behavior depends on the molecular weight of the rigid segment; only the four‐armed rod–coil star block copolymers with each arm's M_n,_GPC of the rigid block beyond 0.91 × 10⁴ g/mol could form liquid‐crystalline phases above the glass‐transition temperature of the rigid block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 733–741, 2005     

Reactive polymers incorporating silyl enol ether groups. I. synthesis by radical polymerization of 2-(trimethylsiloxy)-butadiene and 2-(tert)-butyldimethylsiloxy butadiene

2-(Trimethylsiloxy)butadiene (TMSBD) and 2-(tert-butyldimethylsiloxy)butadiene (TBMSBD) were copolymerized with styrene (St) and methyl methacrylate (MMA) under free-radical conditions. The obtained polymers were found to contain reactive silyl enol ether groups in a ratio identical to the TMSBD or TBMSBD molar fraction in the copolymer. All investigated samples displayed only 1,4- and 3,4-microstructures. The influence of several experimental factors on the yields, rates of polymerization, microstructures, and copolymer compositions were examined. Monomer reactivity ratios r₁ and r₂ at 60°C were determined from copolymer composition curves at low conversions. The homopolymerization of TBMSBD was also investigated and results were compared with those previously obtained for TMSBD. A slight increase in rates was observed and was rationalized on the basis of the higher viscosity resulting from the structural change in the monomer. Thermal stabilities of the synthesized polymers were investigated by TGA and their glass transition temperatures were determined by DSC. All measurements are compatible with a possible use of TMSBD and TBMSBD copolymers as reactive polymers. © 1996 John Wiley & Sons, Inc.     

Atom Transfer Radical Polymerization of Methyl Methacrylate Using Telechelic Tribromo Terminated Polyurethane Macroinitiator

Novel telechelic tribromo terminated polyurethane (Br₃-PU-Br₃) was used as a macroinitiator in atom transfer radical polymerization (ATRP) of methyl methacrylate using CuBr as a catalyst and NN,N',N”,N”-pentamethyldiethylenetriamine (PMDETA) as a ligand. During the course of polymerization, poly(methyl methacrylate)-b-polyurethane-b-poly(methyl methacrylate) (PMMA-b-PU-b-PMMA) tri-block copolymers were formed. The resulting tri-block copolymers were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy. Molecular weight of the tri-block copolymers increases with increasing conversion. This result shows Br₃-PU-Br₃/CuBr/PMDETA initiating system polymerized methyl methacrylate through ATRP mechanism. NMR spectroscopy results revealed that apart from bromine atom transfer from Br₃-PU-Br₃ to PMDETA-CuBr complex, bromine atom transfer from the initially formed tri-block copolymer to PMDETA-CuBr complex also takes place, and, as a result, double bond terminated copolymer formed. Mole ratio of polyurethane and poly(methyl methacrylate) present in the PMMA-b-PU-b-PMMA tri-block copolymers was calculated using ¹H-NMR spectroscopy and it was found to be comparable with the mole ratio calculated through GPC results. Differential scanning calorimetric results confirmed the presence of two different phases in the tri-block copolymers.     

Synthesis, spectral and thermal properties of homo- and copolymers of 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate with styrene and methyl methacrylate and determination of monomer reactivity ratios

The methacrylate monomer, 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate (IAOEMA), was synthesized by reacting 2-chloro-N-(5-methylisoxazol)acetamide dissolved in acetonitrile with sodium methacrylate in the presence of triethylbenzylammoniumchloride (TEBAC). The free-radical-initiated copolymerization of IAOEMA, with styrene (ST) and methyl methacrylate (MMA) was carried out in dimethylsulphoxide (DMSO) solution at 65 °C using 2,2^′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomer (IAOEMA) and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer composition was evaluated by nitrogen content in polymers led to the determination of reactivity ratios. The reactivity ratios of the monomers were determined by the application of Fineman-Ross and Kelen-Tüdös methods. The analysis of reactivity ratios revealed that ST and MMA are more reactive than IAOEMA, and copolymers formed are statisticalle in nature. The molecular weights (M_w and M_n) and polydispersity index of the polymers were determined using gel permeation chromagtography. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of IAOEMA in the copolymers. The apparent thermal decomposition activation energies (E_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance.     

Polymerization of acrylates and bulky methacrylates with the use of zirconocene precursors: Block copolymers with methyl methacrylate

The polymerization behavior of cyclohexyl methacrylate and trimethylsilyloxyethyl methacrylate with the catalytic system Cp₂ZrMe₂/B(C₆F₅)₃/ZnEt₂ was examined. Block copolymers of these bulky methacrylates with methyl methacrylate (MMA), having high molecular weights and relatively narrow molecular weight distributions, were prepared. n‐Butyl acrylate and tert‐butyl acrylate were polymerized with various catalytic systems based on zirconocene complexes. These polymerizations seemed to proceed to a nonquantitative yield, producing polymers with high molecular weights and relatively low polydispersities. This behavior indicated the presence of termination reactions in the initiation step, which appeared to be faster than the propagation step. Block copolymers of these acrylates with MMA were synthesized with the catalytic system rac‐Et(Ind)₂ZrMe₂/[B(C₆F₅)₄]⁻[Me₂NHPh]⁺/ZnEt₂, starting from the polymerization of MMA. The block copolymers produced were well defined in most cases, as indicated by size exclusion chromatography, NMR, and differential scanning calorimetry measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3337–3348, 2005     

Syntheses,characterizations, crystal structures,and in vitro antitumor activities of chiral triorganotin(IV) complexes containing (S)-(+)-2-(4-isobutyl-phenyl)propionic and (R)-(+)-2-(4-hydroxyphenoxy)propionic acid ligands

Four new chiral triorganotin(IV) carboxylates, [(R₃Sn)(O₂C₁₃H₁₇)] _n (R?=?Me 1, Ph 2), [(R₃Sn)(O₂C₁₃H₁₇)] (R?=?n-Bu 3), and [(R₃Sn)(O₄C₉H₉)] _n (R?=?Me 4), have been synthesized by reaction of (S)-(+)-2-(4-isobutyl-phenyl)propionic acid and (R)-(+)-2-(4hydroxyphenoxy)propionic acid with triorganotin(IV) chloride in the presence of sodium ethoxide. The complexes have been characterized by elemental analyses, FT-IR, NMR (¹H, ¹³C, and ¹¹⁹Sn) spectra, and X-ray crystallography diffraction analyses. Structural analyses show that 1 has a 1-D infinite chiral zigzag chain structure. Complexes 2 and 4 have a 1-D spring-like chiral helical chain with a channel, while 3 is a monomer. Antitumor activities of 1–4 have been studied.     

有机锂试剂对二茂铁亚胺的不对称加成反应

研究了利用(－)-sparteine辅助的有机锂试剂对非手性二茂铁亚胺的对映选择性加成和对衍生于廉价的苯乙胺的手性二茂铁亚胺的非对映选择性加成反应. 对亚胺结构和实验条件对反应的影响进行了深入研究. 在有机锂试剂对非手性二茂铁亚胺的对映异构体选择性加成中得到了中等的对映选择性, 对衍生于(R)-苯乙胺的手性二茂铁亚胺的非对映选择性加成反应, 路易斯酸BF3•OEt2的添加对反应非常有利, 得到了非常好的非对映选择性.     

Synthesis,stereochemistry, and spectroscopic characterization of [Rh(η4-cod){(R)-2-(X-benzaldimine)-2-phenylethanol-κ 2 N,O}](acetate) (X = H; 2,4-dimethoxy)

Condensation of X-benzaldehyde with (R)-2-amino-2-phenylethanol gives the enantiopure Schiff bases (R)-2-(X-benzaldimine)-2-phenylethanol (X?=?H, HL1; 2,4-dimethoxy, HL2). The Schiff bases coordinate with dinuclear [Rh(η⁴-cod)(µ-O₂CCH₃)]₂ to afford the cationic complexes [Rh(η⁴-cod){(R)-2-(benzaldimine)-2-phenylethanol-κ ² N,O}](acetate), [Rh(η⁴-cod)(HL1)](ac) (1) and [Rh(η⁴-cod){(R)-2-(2,4-dimethoxy-benzaldimine)-2-phenylethanol-κ ² N,O}](acetate), [Rh(η⁴-cod)(HL2)](ac) (2), respectively. The Schiff bases and complexes are isolated as solids in good yields and characterized by elemental analysis, IR, UV-Vis, ¹H/¹³C-NMR, mass spectroscopy, and polarimetry.     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Preparation and characterization of optically active polymers containing pendent and terminal chiral units via atom transfer radical polymerization

Optically active homopolymers and copolymers, bearing chiral units at the side chain and end chain, were prepared via atom transfer radical polymerization (ATRP) techniques. The well‐defined optically active polymers were obtained via the ATRP of pregnenolone methacrylate (PR‐MA), β‐cholestanol acrylate (CH‐A), and 20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one acrylate (HPD‐A) with ethyl 2‐bromopropionate as the initiator and CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalytic system. The experimental results showed that the polymerizations of PR‐MA, CH‐A, and HPD‐A proceeded in a living fashion, providing pendent chiral group polymers with low molecular weight distributions and predetermined molecular weights that increased linearly with the monomer conversion. Furthermore, the copolymers poly(pregnenolone methacrylate)‐b‐poly[(dimethylamino)ethyl methacrylate] and poly(pregnenolone methacrylate‐co‐methyl methacrylate) were synthesized and characterized with ¹H NMR, transmission electron microscopy, and polarimetric analysis. In addition, when optically active initiators estrone 2‐bromopropionate and 20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one 2‐bromopropionate were used for ATRPs of methyl methacrylate and styrene, terminal optically active poly(methyl methacrylate) and polystyrene were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1502–1513, 2006     

Synthesis,Antimicrobial Activity and Semi-conducting Properties of Novel 2-(4-Chloro-1-Naphtyloxy)-2-Oxoethyl Methacrylate with 2-(Diethylamino)Ethyl Methacrylate Copolymers

The free-radical initiated copolymerization of 2-(4-chloro-1-naphtyloxy)-2-oxoethyl methacrylate (ClNOEMA) with 2-(diethylamino) ethyl methacrylate (DEAEMA) was carried out in 1,4-dioxane solution at 70 ± 1°C using 2,2′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios (ranging from 0.15 to 0.85) in the feed. The copolymer composition obtained by elemental analysis led to the determination of reactivity ratios employing Fineman-Ross (F-R) and Kelen-Tüdös (KT) linearization methods. These parameters were also estimated using a non-linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The prepared homo and copolymers were tested for their antimicrobial activity against bacteria and yeast. These copolymers have been converted into novel salts by reaction with the iodemethane (CH₃I). The copolymers and the corresponding salts have been characterized fully by a range of spectroscopic analysis techniques. The electrical conductivity dependence of temperature of the polymers were measured and the polymers exhibit the semi-conducting behavior, confirming that the electrical conductivity increases with increasing temperature. The poly(CINOEMA-co-DEAEMA) polymer doped by CH₃I for 15 min shows the highest conductivity. The optical band gap, activation energy and room temperature conductivity values of these polymers were obtained. These electronic parameters suggest that the poly(CINOEMA-co-DEAEMA)s doped by CH₃I for 15 min is an organic semiconductor with the thermally activated conduction mechanism.     

Copolymers of methyl methacrylate and fluoroalkyl methacrylates: Effects of fluoroalkyl groups on the thermal and optical properties of the copolymers

Fluoroalkyl methacrylates, 2,2,2‐trifluoroethyl methacrylate ( 1 ), hexafluoroisopropyl methacrylate ( 2 ), 1,1,1,3,3,3‐hexafluoro‐2‐methyl‐2‐propyl methacrylate ( 3 ), and perfluoro t‐butyl methacrylate ( 4 ) were synthesized. Homopolymers and copolymers of these fluoroalkyl methacrylates with methyl methacrylate (MMA) were prepared and characterized. With the exception of the copolymers of MMA and 2,2,2‐trifluoroethyl methacrylate ( 1 ), the glass transition temperatures (T_gs) of the copolymers were found to deviate positively from the Gordon‐Taylor equation. The positive deviation from the Gordon‐Taylor equation could be accounted for by the dipole–dipole intrachain interaction between the methyl ester group and the fluoroalkyl ester group of the monomer units. These T_g values of the copolymers were found to fit with the Schneider equation. The fitting parameters in the Schneider equation were calculated, and R² values, the coefficients of determination, were almost 1.0. The refractive indices of the copolymers, measured at 532, 633, and 839 nm wavelengths, were lower than that of PMMA and showed a linear relationship with monomer composition in the copolymers. 2 and MMA have a tendency to polymerize in an alternating uniform monomer composition, resulting in less light scattering. This result suggests that the copolymer prepared with an equal molar ratio of 2 and MMA may have useful properties with applications in optical devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4748–4755, 2008     

Precise synthesis of thermo-responsive and water-soluble star-branched polymers and star block copolymers by living anionic polymerization

A series of thermo-responsive and water-soluble 4- and 8-arm star-branched poly(2-(2′-methoxyethoxy)ethyl methacrylate) (poly(1)) with well-defined structures were synthesized by living anionic polymerization of 1, followed by a linking reaction with a core compound substituted with either four or eight benzyl bromide moieties. Furthermore, two kinds of sequentially different 4-arm star block copolymers composed of poly(1)-block-poly ((2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate) (poly(4)) were also synthesized by the same linking reaction of the corresponding AB or BA diblock copolymer anion with a core compound substituted with four benzyl bromide moieties. Thus, both well-defined 4-arm (AB)₄ and (BA)₄ star-block copolymers, whose A and B are poly(1) and poly(4) segments, were successfully synthesized. These star-block copolymers were quantitatively converted to the corresponding 4-arm (AC)₄ and (CA)₄ star-block copolymers with the same compositions by hydrolytic acetal cleavage of the poly(4) segment to poly(2,3-dihydroxypropyl methacrylate) (C segment). Poly(1) segments have LCST values and, on the other hand, both water-insoluble poly(4)s and water-soluble poly(2,3-dihydroxypropyl methacrylate)s are non-thermo-responsive segments. The thermo-responsive behavior of the resulting 4- and 8-arm star-branched poly(1) as well as the 4-arm (AB)₄, (BA)₄, (AC)₄, and (CA)₄ star-branched block copolymers has been extensively studied in terms of molecular weight, arm number, composition, and block sequence. As expected, such variables were observed to affect their LCST values. Interestingly, the thermo-responsive behavior of the 4-arm (AC)₄ and (CA)₄ stars was different from that of the block copolymers used as arm segments.     

Polymerization behavior of 2,2,6,6-tetramethylpiperidinyl methacrylate: A monomer carrying a hindered amine group

Copolymers of 2,2,6,6-tetramethylpiperidinyl methacrylate (TPMA) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–TPMA copolymers from feed ranging from 0.10–0.80 mole fractions TPMA and MMA-TPMA copolymers from feed of 0.04–0.85 mole fractions TPMA were used in the determination of monomer reactivity ratios r₁, r₂. Four different methods were employed in the calculations of r₁ and r₂ and all calculated results were in good agreement with each other. The structure of S–TPMA copolymers was inferred to be of an alternating nature while that of MMA–TPMA copolymers was random. Both copolymers are potential hindered amine light stabilizers (HALS) and are expected to be less extractable from, and more compatible with, polystyrene and poly(methyl methacrylate) base polymers.     

Synthesis and Characterization of New 1-Methyl-4-(Methylamino)Piperidine and Decahydroquinoline Platinum(II) Complexes Containing Disubstituted Sulfide as a Leaving Group

A series of cationic platinum(II) complexes of the type [Pt(mmap)R'R"S)Cl](NO₃) and [Pt(dhq)₂(R'R"S)Cl]-(NO₃) (where mmap=1-methyl-4-(methylamino)piperidine; dhq=decahydroquinoline; and R'R"S=dimethylsulfide, diethylsulfide, diisopropylsulfide, diphenylsulfide, dibenzylsulfide, methylphenylsulfide or methyl-p-tolylsulfide) has been synthesized and characterized by elemental analysis, infrared, ¹H and ¹⁹⁵Pt nuclear magnetic resonance spectroscopic techniques.     

Side group functionalized liquid crystalline polymers and blends VIII. Nematic and SmAre phase formation in hydrogen-bonded blends of smectic side group LC polymers and a low molar mass dopant

Hydrogen-bonded blends based on smectic side group functionalized LC copolymers containing 4-alkyloxybenzoic acid fragments (proton donor) and a non-mesogenic low molecular mass dopant 4-cyanophenyl pyridine-4-carboxylate or 4-methoxyphenyl-d₄ pyridine-4-carboxylate (proton acceptor) were obtained. The blends containing 10-35 mol % of low molecular weight dopant form nematic (I-N-SmA) or re-entrant SmA phases (I-SmA-N-SmAre). The temperature dependence of the order parameter S, the birefringence Δn, and the splay K ₁ and bend K ₃ elastic constants of the nematic phase were studied by ²H NMR spectroscopy and the Fréedericksz method of threshold transitions in a magnetic field. A mechanism for the destruction of the SmA phase and the formation of the nematic phase in the hydrogen-bonded blends is suggested.     

Synthesis and radiation degradation of vinyl polymers with fluorine: Search for improved lithographic resists

Homopolymers of methyl α-fluoroacrylate (MFA), trifluoroethyl methacrylate (TFEM), and hexafluoroisopropyl methacrylate (HFIM) were prepared, as were their methyl methacrylate (MMA) copolymers. Copolymers of vinylidene fluoride (VDF) and chlorotrifluoroethylene (CTFE) with MMA were also prepared. The radiation susceptibilities of these polymers were measured by the ⁶⁰Co γ-irradiation method, in which molecular weights were measured by membrane osmometry and gel permeation chromatography (GPC). All the copolymers degraded by predominant chain scission except poly(methyl α-fluoroacrylate), (PMFA), which crosslinks even at low doses (ca. 1 Mrad). The G_s - G_x and G_s values of the chain scissioning polymers and copolymers are higher than those of poly(methyl methacrylate) PMMA reference. The high susceptibility of PMFA homopolymer to crosslinking is in contrast to that of poly(methyl α-chloroacrylate), as we reported earlier. This effect is interpreted as resulting from extensive hydrogen fluoride and polyenlyl radical formation, which leads to facile crosslinking. However, incorporation of the MFA monomer unit causes the (22/78) MFA/MMA copolymer to degrade with a larger value of G_s that PMMA. Apparently a second-order process leads to crosslinking in PMFA and this is retarded in the copolymer. In the hehomopolymers of HFIM and TFEM and in the HFIM-MMA and TFEM-MMA copolymers the HFIM and TFEM components facilitate degradation with negligible crosslinking. The increased degradation susceptibility of VDF and CTFE copolymers with MMA over that of PMMA is attributed to processes at the VDF or CTFE components present in smaller concentrations (3-5 mole %) than the threshold levels (25-50% necessary for significant crosslinking).     

Zinc (II), palladium (II) and cadmium (II) complexes containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline derivatives: Synthesis,characterization and methyl methacrylate polymerization

A series of Zn (II), Pd (II) and Cd (II) complexes, [(L) _n MX ₂ ] _m (L = L‐a–L‐c; M = Zn, Pd; X = Cl; M = Cd; X = Br; n, m = 1 or 2), containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline ( L‐a ), 4‐methoxy‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐b ) and 4‐methoxy‐N‐methyl‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐c ) have been synthesized and characterized. The X‐ray crystal structures of Pd (II) complexes [L ₁ PdCl ₂ ] (L = L‐b and L‐c) revealed distorted square planar geometries obtained via coordinative interaction of the nitrogen atoms of pyridine and amine moieties and two chloro ligands. The geometry around Zn (II) center in [(L‐a)ZnCl ₂ ] and [(L‐c)ZnCl ₂ ] can be best described as distorted tetrahedral, whereas [(L‐b) ₂ ZnCl ₂ ] and [(L‐b) ₂ CdBr ₂ ] achieved 6‐coordinated octahedral geometries around Zn and Cd centers through 2‐equivalent ligands, respectively. In addition, a dimeric [(L‐c)Cd(μ ‐ Br)Br] ₂ complex exhibited typical 5‐coordinated trigonal bipyramidal geometry around Cd center. The polymerization of methyl methacrylate in the presence of modified methylaluminoxane was evaluated by all the synthesized complexes at 60°C. Among these complexes, [(L‐b)PdCl ₂ ] showed the highest catalytic activity [3.80 × 10⁴ g poly (methyl methacrylate) (PMMA)/mol Pd hr^?1], yielding high molecular weight (9.12 × 10⁵ g mol^?1) PMMA. Syndio‐enriched PMMA (characterized using ¹H‐NMR spectroscopy) of about 0.68 was obtained with T_g in the range 120–128°C. Unlike imine and amine moieties, the introduction of N‐methyl moiety has an adverse effect on the catalytic activity, but the syndiotacticity remained unaffected.