Influence of oxidized interlayers on magnetic properties of multilayer films based on amorphous ferromagnet–dielectric nanocomposites

Films of composites (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x, (Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x, (Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x and multilayer heterogeneous composite–composite structures {[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x]/[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x + N₂]}_n, {[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x]/[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x + O₂]}_n, {[(Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x]/[(Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x + O₂]}_n, and {[(Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x]/[(Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x + O₂]}_n have been deposited using the ionbeam sputtering method with a cyclic supply of reaction gases during deposition. The structure and magnetic properties of the films have been studied. It has been shown that the introduction of an oxidized interlayer makes it possible to suppress the perpendicular magnetic anisotropy in the (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x composite with the metallic phase concentration higher than the percolation threshold.     

Conductivity and anomalous Hall effect in film magnetic nanocomposites based on nonstoichiometric oxides

The transport properties of film nanocomposites (Co₄₀Fe₄₀B₂₀) _x (AlO _y )_{100 ? x} and (Co₈₄Nb₁₄Ta₂) _x (AlO _y )_{100 ? x} based on AlO _y oxide (y ~ 1), containing a ferromagnetic metal, are studied in the region of the metal–insulator transition (57 > x > 47 at %). It is found that at x > 49 at %, the conductivity of nanocomposites is well described by a logarithmic law of σ(T) = a + b ln T, which can be explained by the peculiarities of the Coulomb interaction in nanogranular systems with metallic conductivity near the metal—insulator transition. It is shown that parameter b is determined by the characteristic size of the percolation cluster cell, which in nanocomposites of both types happen to be the same (~8 nm) and correlates well with the results of electron microscopy studies. The temperature dependence of the anomalous Hall effect at the logarithmic dependence of conductivity is studied for the first time. In the immediate vicinity of the transition, a power-law scaling between the anomalous Hall resistance and longitudinal resistance ρ _H ^a ∝ ρ^0.4, is detected, which can be explained by the suppression of its own mechanism of the anomalous Hall effect under the strong scattering of charge carriers.     

Spin canting in ferrite nanoparticles

Recently, an easily scalable process for the production of small (3 ?7 nm) monodisperse superparamagnetic ferrite nanoparticles MeFe₂O₄ (Me = Zn, Mn, Co) from iron metal and octanoic acid has been reported (Salih et al., Chem. Mater. 25 1430–1435 2013). Here we present a Mössbauer spectroscopic study of these ferrite nanoparticles in external magnetic fields of up to B = 5 T at liquid helium temperatures. Our analysis shows that all three systems show a comparable inversion degree and the cationic distribution for the tetrahedral A and the octahedral B sites has been determined to (Zn_0.19Fe_0.81) ^A [Zn_0.81Fe_1.19] ^B O₄, (Mn_0.15Fe_0.85) ^A [Mn_0.85Fe_1.15] ^B O₄ and (Co_0.27Fe_0.73) ^A [Co_0.73Fe_1.27] ^B O₄. Spin canting occurs presumably in the B-sites and spin canting angles of 33°, 51° and 59° have been determined for the zinc, the manganese, and the cobalt ferrite nanoparticles.     

Inverse magnetoresistance in (FeCoB)-(Al<Subscript>2</Subscript>O<Subscript>3</Subscript>) magnetic granular composites

The magnetoresistance, magnetization, and microstructure of granular composites with the general formula (Fe₄₀Co₄₀B₂₀)_x(Al₂O₃)_100?x were studied for contents of the amorphous metallic component both above and below the percolation threshold (x≈43). The low-temperature transverse magnetoresistance of the composites is negative at x=41 and practically zero for x=49. For metal contents below the percolation threshold (x=31), a noticeable (7–8%) positive magnetoresistance, reached in magnetic fields of about 17 kOe, was observed. Possible mechanisms of the generation of inverse (positive) magnetoresistance are discussed.     

Microwave and electrical properties of Co-Ti substituted M-type Ba hexagonal ferrite

The microwave characteristics of Co²⁺ and Ti⁴⁺ ions substituted, BaCo _x Ti _x Fe_(12?2x)O₁₉ (x = 0.1, 0.3, 0.5, 0.7, 0.9) ferrite have been studied as a function of thickness, frequency and substitution. The results depict reflection loss of ? 31.94 dB at 10.47 GHz in x = 0.9. The highest static electrical current is observed at lower substitution. The model accompanying microwave absorption is used to evaluate microwave absorption characteristics. The electromagnetic and static electrical characteristics are improved with the substitution of Co²⁺ and Ti⁴⁺ ions. The compositions for possible electromagnetic applications are also explored.     

XANES study of interatomic interactions in (CoFeZr)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> (SiO<Subscript>2</Subscript>)<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript> nanocomposites

Analysis of the X-ray absorption near-edge structure of (Co₄₅Fe₄₅Zr₁₀)x(SiO₂)_1–x nanocomposites has shown the presence of interaction between atoms of the metallic and dielectric components in the nanocomposite. In this process, d-metal ions (Fe³⁺, Fe²⁺, Co²⁺) play the most active role. They interact with oxygen ions of the dielectric component and form not only Fe₂O₃ × CoO nanoferrites but also silicates of d metals.     

Single-crystalline M-type Sr Hexaferrites studied by <Superscript>57</Superscript>Fe Mössbauer spectroscopy

The ⁵⁷Fe Mössbauer spectra of the single crystalline and the finely ground Sr_1?x La _x Fe_12?y Co _y O₁₉ (x = 0 : y = 0, x = 0.192 : y = 0.152 and x = 0.456 : y = 0.225) samples have been measured to investigate the La-Co substitution effects. All observed spectra at 150 K were well fitted using the five subspectra which correspond to the five crystallographical nonequivalent Fe sites in the M-type hexaferrite, indicating that the valence changes to Fe²⁺ ions in the Fe³⁺ ions were not observed in our Sr_1?x La _x Fe_12?y Co _y O₁₉ samples. In SrFe₁₂O₁₉, the relative absorption intensities in the five subspectra show the large anisotropies in the recoilless fractions at the five Fe sites whereas these anisotropies were not observed in Sr_0.544La_0.456Fe_11.775Co_0.225O₁₉. These results indicate the chemical compositional dependence on the anisotropies of the recoilless fractions at the five Fe sites. The substitution of a Co²⁺ ion for the Fe³⁺ ion changes the center shifts of the Fe³⁺ ions near the Co²⁺ ion by the perturbation of the Fe-O-Co hybridizations. Therefore, the Co²⁺ ions occupy the 4f ₁ and the 4f ₂ sites due to the chemical compositional dependences of the refined magnetic hyperfine field and center shifts of the Fe³⁺ ions.     

AC and DC properties of M-type SrCo<Subscript>x</Subscript>Ti<Subscript>x</Subscript>Fe<Subscript>(12−2x)</Subscript>O<Subscript>19</Subscript> hexagonal ferrite

Microwave characterization of SrCo _x Ti _x Fe_(12?2x)O₁₉ (x = 0.0, 0.2, 0.3, 0.5, 0.6, 0.7, 1.0) ferrites has been studied as a function of frequency, substitution and thickness, and static electrical current density-electric field characteristics have been investigated as a function of substitution. Microwave characteristics have been measured using power meter in the rectangular slotted waveguide and current density is measured using electrometer. The microwave absorption is evaluated using the standard available model. The results depict ?11.57 dB reflection loss at 10.38 GHz in composition x = 0.6. The electrical current density decreases at lower substitution and increases at higher substitution. The substitution of Co²⁺ and Ti⁴⁺ ions causes enhancement of electromagnetic and static electrical properties.     

Simulation of the structural,electronic, and magnetic properties of Fe<Subscript>3</Subscript>C<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>B<Subscript>x</Subscript> borocementites

The structural, electronic, and magnetic properties and the enthalpy of formation of iron borocementites Fe₃C_1?x B_x (x= 0, 0.25, 0.50, 0.75, 1.00) are analyzed using ab initio calculations in the framework of the electron density functional theory. It is found that the unit cell parameter a of the orthorhombic lattice increases linearly and the parameters b and c decrease as the boron concentration increases. The density of states at the Fermi level changes only slightly, and the main variations in the band structure occur in the region of the bottom of the valence bands. The magnetic moment of the iron atoms and the total magnetization and stability of the Fe₃C_1?x B_x phases increase linearly with an increase in the boron concentration.     

Magnetorefractive effect in (Co<Subscript>50</Subscript>Fe<Subscript>50</Subscript>)<Subscript>x</Subscript>(Al<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> granular films

The reflectivity spectra and the magnetorefractive effect (MRE) of (Co₅₀Fe₅₀)_x(Al₂O₃)_1?x metal-dielectric granular films (0.07<x<0.52) are analyzed in the IR spectral range λ=2.5–25 µm. It is revealed that the specific features observed in the spectra at λ≈8.5 and 20 µm are associated with the excitation of phonon modes in the dielectric matrix. The magnetorefractive effect in the films is observed below the percolation thresh-old only in p-polarized light and above the percolation threshold for both the p and s polarizations. It is demonstrated that the optical properties of (Co₅₀Fe₅₀)_x(Al₂O₃)_1?x films in the IR spectral range, to a first approximation, can be interpreted in the framework of the effective-medium theory and the magnetorefractive effect can be explained in terms of the modified Hagen-Rubens relation.     

Dependence of the coercive force on the magnetic field sweep rate in (PrDy)(FeCo)B alloys

The dependence between the coercive force and the average hysteresis loop record time was revealed in sintered (Pr_{1 – x} Dy _x )₁₃(Fe_{1 – y} Co _y )₇₉B₈ magnets. The coercive force was established to grow by 22% with an increase in the average hysteresis loop sweep rate within a range of 1.1 × 10²–3 × 10⁵ Oe/min, obeying a logarithmic dependence on the loop passage velocity with saturation at low rates. Some domain structure transformations produced by a magnetic field in the process of magnetization were established by magnetic force microscopy.     

Electrical conductivity and thermopower in Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Mn<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript> S sulfides

This paper reports on the results of investigations into the structural, electrical, and thermoelectrical properties of sulfides Co _x Mn_{1 ? x} S (0 ≤ x ≤ 0.4) in the temperature range 80–950 K. It is established that the thermopower coefficient α decreases significantly with an increase in the cobalt concentration in the lattice of the α-MnS compound. The Co _x Mn_{1 ? x} S compounds with cobalt concentrations in the range 0 ≤ x ≤ 0.3 are semiconductors with hole conduction (α > 0), whereas the compound with x = 0.4 exhibits metallic conduction (α < 0). It is found that the band gap E _g of the compounds under investigation varies in the range from 1.46 eV for α-MnS (x = 0) to 0.26 eV for Co _x Mn_{1 ? x} S (x = 0.4).     

Magnetothermopower of nanocomposites in the vicinity of the percolation threshold

The field dependences of the thermopower of composites with Co and Co₄₅Fe₄₅Zr₁₀ nanoparticles in the Al₂O _n insulator matrix are studied in magnetic fields up to 10 kOe at room temperature with compositions up to the percolation threshold (i.e., in the region where tunnel conductivity takes place). In composites obtained in argon, negative magnetothermopower (i.e., a decrease in the thermopower in strong magnetic fields) is observed, while positive magnetothermopower is observed in composites obtained in the atmosphere of argon and oxygen. It is shown that the theory developed for tunnel magnetothermopower in nanocomposites makes it possible to explain the results on a qualitative level in the case when the local density of electron states at the surface of nanoparticles depends on the sputtering conditions. Nanocomposites CoFeZr _x (Al₂O _n )_100?x ) obtained in argon and nitrogen display a strong asymmetry of magnetothermopower relative to the magnetic field direction; this anisotropy is associated with anisotropy of these nanostructures.     

Ab initio calculations of the stability and structural defects of the <Emphasis Type="Italic">B</Emphasis>2 Cu<Subscript>x</Subscript>Fe<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Al phases

The stability of the B2 Cu_xFe_1?x Al phases and the energy of defect formation are studied using ab initio band calculations. For B2 Cu_xFe_1?x Al alloys, vacancies in the 3d-metal sublattice and configurations with the minimum number of Fe-Cu bonds in the first coordination shell (including Fe antisite defects, which have a high local magnetic moment) are most stable. Complicated defect complexes with vacancies and displaced atoms, which are close to the atomic configurations of vacancy-ordered AlCu phases, can exist near the composition Cu_0.875Fe_0.125Al.     

Structural and magnetic phase transformations in the diluted laves phases Pr(Fe<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Al<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)<Subscript>2</Subscript>

The Pr(Fe_{1 ? x} Al _x )₂ alloys with concentrations x = 0–1 have been synthesized under a high pressure. The phase composition and lattice parameters (a and c) have been determined as a function of x. The magnetic and Mössbauer measurements have been performed at T = 90–400 K. It has been established that the Curie temperatures of alloys linearly depend on their composition.     

Magnetic and electrical properties of crystalline materials based on indium and copper chalcogenides in a wide range of temperatures and pressures

The effect of temperatures (2–300 K) and high pressures (to 50 GPa) on the electrical and magnetic properties of crystalline materials based on copper and indium chalcogenides with the general formula (InB)_1?x (CuAB ₂)_x, where A = As, Sb; and B = S, Se, and also crystalline CuInSe₂ and CuInS₂, has been studied.     

Ferrimagnetic nanoparticles for self-controlled magnetic hyperthermia

Based on the Heisenberg model including single-site uniaxial anisotropy and using aGreen’s function technique we studied the influence of size and composition effects on theCurie temperature T _C , saturationmagnetization M _S and coercivityH _C of spherical nanoparticles with astructural formulaM e _1?x Zn _x Fe₂O₄,Me = Ni, Cu, Co, Mn. It is shown that for x = 0.4–0.5and d = 10–20 nm these nanoparticles have aT _C  = 315 K and are suitable for aself-controlled magnetic hyperthermia.     

Magnetic properties of Fe<Subscript>3</Subscript>C ferromagnetic nanoparticles encapsulated in carbon nanotubes

The low-temperature dependences of magnetic characteristics (namely, the coercive force H _c , the remanent magnetization M _r , local magnetic anisotropy fields H _a, and the saturation magnetization M _s ) determined from the irreversible and reversible parts of the magnetization curves for Fe₃C ferromagnetic nanoparticles encapsulated in carbon nanotubes are investigated experimentally. The behavior of the temperature dependences of the coercive force H _c (T) and the remanent magnetization M _r (T) indicates a single-domain structure of the particles under study and makes it possible to estimate their blocking temperature T _B = 420–450 K. It is found that the saturation magnetization M _s and the local magnetic anisotropy field H _a vary with temperature as ～T ^5/2.     

Magnetic and structural properties of Fe–Co nanowires fabricated by matrix synthesis in the pores of track membranes

Fe_1-x Co _x nanowires are obtained by electrochemical deposition into the pores of track-etched membranes. The characteristics of the growth process that allow controlling the length and aspect ratio of the nanowires are established. The elemental composition and magnetic properties of the nanowires depend on the diameter of the track-etched pores, which varies from 30 to 200 nm, and the electrochemical potential U (650–850 mV), which determines the nanowire growth rate. According to the results of elemental analysis and the Mössbauer spectroscopy data, the Co content in Fe_1-x Co _x lies in the range of x=0.20?0.25. It is found that the orientation of the magnetic moment of Fe–Co nanoparticles in the wires depends both on the track pore size d and on the nanowire growth rate. Thus, the magnetic moments in nanowires grown in 50-nm-diameter pores are oriented within 0°–40° with respect to the nanowire axis. The magnetic properties of the nanowires are explained in the framework of a theoretical model describing the magnetic dynamics of nanocomposites, which was extended to include the relaxation of the magnetization vector and to take into account interaction between the particles. The key physical parameters important for the technological applications of the nanowires are determined, their dependence on the nanowire growth conditions is traced, and the possibility of controlling them is established.