Effect of the spectral distribution of a chirped pulse on the interaction of the high-power laser radiation with matter

The interaction of high-power picosecond laser radiation with solid targets is experimentally studied for the first time at various spectral distributions of a chirped laser pulse. The interaction of the high-power laser radiation with the target is studied at four regimes of the experimental setup: (i) at a relatively high contrast (10³) in the picosecond (Δt ～ 25 ps) range, (ii) at a relatively low contrast (3 × 10¹) in the picosecond (Δt ～ 25 ps) range, (iii) with spectral distortions of the chirped pulse, and (iv) with a strongly modulated spectrum of the chirped pulse. The results obtained reveal a strong dependence of the atomic and nuclear processes in the laser picosecond plasma on the spectral distribution of the chirped laser pulse. The prospects for the application of the spectral interferometry of chirped pulses for the online control of the parameters of the high-power laser radiation are demonstrated.     

Laser ablation of dental materials using a microsecond Nd:YAG laser

The action of microsecond laser pulses with a wavelength of 1064 nm on dental tissues (enamel and dentin) and various dental materials used for tooth replacement and filling (ceramics, metal alloys, and composites) is studied. It is demonstrated that the ablation thresholds of all of the dental materials are significantly lower than the threshold laser fluences for the dental tissue (E _thr = 200–300 J/cm²). At the laser fluences that do not allow ablation and damage of the dental tissues, the dental materials are effectively removed at a rate of no greater than 40 μm per pulse. It is shown that the laser ablation of the materials under study involves two processes (evaporation and volume explosion) depending on the optical density. The results obtained indicate that the laser radiation with a wavelength of 1064 nm and the microsecond pulse duration is promising for dental applications, since it allows effective cleaning of the tooth surface from various dental materials in the absence of the damages of dental tissues.     

Tunable,sub-nanosecond KrF-Raman laser in the ultraviolet

A 0.5 cm^–1 bandwidth injection-locked KrF laser pumps a rare-gas Brillouin cell to produce a reflected pulse with a leading edge risetime of 1 ns, tunable from 248.1 to 248.7 nm. Consistent with Lamb theory of laser amplifiers, subsequent excimer amplification of this pulse produces an intense 500 ps spike on the pulse leading edge. Stimulated Raman scattering then separates the spike from the parent pulse, yielding a tunable short pulse at the first Stokes (S ₁) wavelength. Varying the Raman cell length results in a variable Raman threshold and an adjustable short pulse duration: 250 ps pulses at energies of 3–4 mJ at 268 nm with a 50 cm methane cell and 350 ps, 5 mJ pulses from a 100 cm cell are measured with a streak camera. First pass Raman conversion of the spike toS ₁ followed by second pass backward Raman amplification, where the parent 248 nm pulse serves as the pump beam for the reflectedS ₁ pulse, yields simultaneousS ₁ pulses of 20–25 mJ in the 800 ps range andS ₂ pulses of 550 ps at 5–6 mJ near 290 nm. This laser will avoid collision effects during laser excitation and enable quantitative, single pulse imaging of OH radicals in turbulent combustion because of its high pulse energy.     

Microdroplet evolution induced by a laser pulse

Interaction between high-power ultrashort laser pulse and giant clusters (microdroplets) consisting of 10⁹ to 10¹⁰ atoms is considered. The microdroplet size is comparable to the laser wavelength. A model of the evolution of a microdroplet plasma induced by a high-power laser pulse is developed, and the processes taking place after interaction with the pulse are analyzed. It is shown theoretically that the plasma is superheated: its temperature is approximately equal to the ionization potential of an ion having a typical charge. The microdroplet plasma parameters are independent of the pulse shape and duration. The theoretical conclusions are supported by experimental studies of x-ray spectra conducted at JAERI, where a 100-terawatt Ti-sapphire laser system was used to irradiate krypton and xenon microdroplets by laser pulses with pulse widths of 30 to 500 fs and intensities of 6×10¹⁶ to 2×10¹⁹W/cm².     

Pulsed laser damage of proustite

Pulsed laser damage thresholds have been measured for proustite (Ag₃ As S₃) as the wavelengths 0.694, 1.065, 1.32 and 10.6 μm. The damage thresholds have been found to vary with both the wavelength and duration of the irradiating pulse. At 1.065 μm damage thresholds are 0.38 J/cm² for pulses of duration <50 ns whilst for durations >50 ns a value of 7 MW/cm² is appropriate. The results suggest that damage is initiated by absorbing inclusions approximately 0.6 μm in diameter embedded within the crystals. These inclusions are heated by an incident pulse to cause catastrophic damage of both the surface and interior of an irradiated sample. A model has been developed to enable a study of the thermal behaviour of inclusions irradiated by laser pulses with Gaussian time-dependence to be made.     

The effects of process parameters on spatter deposition in laser percussion drilling

This paper reports on the characterisation and analysis of spatter deposition during laser drilling in Nimonic 263 alloy for various laser processing parameters using a fibre-optic delivered 400 W Nd:YAG laser. The principal findings are a large proportion of the spatter (approx. > 70%) was deposited due to the initial laser pulses (before beam breakthrough) required to drill a through-hole. Short pulse widths, low peak powers and high pulse frequencies generated smaller spatter deposition areas. At high pulse frequencies, the spatter distribution/thickness can be altered as a result of laser-ejected material interaction. Focal plane positions between −0.5 and +1.5 mm produced relatively similar spatter areas of about 14 mm². As a result of the reduction in the material removed per pulse, a longer focal length of 160 mm generated smaller areas of spatter deposition in comparison to a shorter focal length of 120 mm. In addition, a generic relationship between the spatter area and d_entrance/d_exit with increasing total laser energy has been established.     

Linear photogalvanic current excited in sillenite crystals by femtosecond laser pulses

We observe electric pulses generated in sillenite crystals (Bi₁₂SiO₂₀ and Bi₁₂TiO₂₀) by 100-fs laser pulses at the wavelength of 400 nm (below the band gaps of both crystals). The peak value of the current pulses scales linearly with the intensity of laser pulses up to ∼45 GW/cm². The direction of the induced current depends on the polarization state of the laser pulse. This polarization dependence and features of the current detection via charge accumulation at the sample electrodes allow us to conclude that the electric pulses are generated due to the linear photogalvanic effect.     

Photodestructive effect of IR laser radiation on the cornea

A mathematical model of the photodestructive effect of high-power IR laser radiation on cornea tissues is presented. The threshold energy exposure is calculated as a function of the wavelength and the laser pulse duration in the range 10^?5–10^?1 s under the assumption that the irreversible primary changes in the structure of tissues have a thermochemical nature. The adequacy of the model is supported by comparison of the results of calculations with a great body of experimental data available in the literature. The model is oriented for use in designing medical equipment (for example, for the refraction correction by the thermal keratoplasty method) and in refining the operating laser safety standards.     

Entropy generation rate during laser pulse heating: Effect of laser pulse parameters on entropy generation rate

Laser pulse heating of solid surface and entropy generation during the heating process are considered. Time exponentially decaying pulse is accommodated in the analysis and the laser pulse parameter (β₁/β₂) resulting in minimum entropy generation rate is computed. Analytical solutions for temperature rise are presented and volumetric entropy generation rate is formulated. Two laser pulses resulting in low volumetric entropy generation rate are examined in detail and volumetric entropy generation rate is associated with the laser pulse parameter (β₁/β₂). It is found that volumetric entropy generation rate attains high values in the early heating period due to large (1/T²). Moreover, the laser pulse with high-peak intensity results in lower volumetric entropy generation rate than that corresponding to the low-intensity laser pulse with the same energy content.     

Laser pulses designed in time by adaptive hydrodynamic modeling for optimizing ultra-fast laser–metal interactions

Determining optimal temporal pulse shapes is an essential aspect for controlling the nature and the energetic characteristics of the ablation products following laser irradiation of materials on ultra-fast scales. In this respect, adaptive feedback loops based on temporal pulse manipulation have been inserted into a hydrodynamic code. The procedure enables us to reach the theoretical maximal temperature at a certain energy input. Several regimes have been considered with fluences ranging from the ablation threshold (F _th=0.34 J/cm²) up to 10 J/cm², proposing an optimal coupling for laser–solid and laser–plasma interactions in these fluence regimes. We determine shapes of optimal pulses on ultra-short and short scales (up to 42 ps) and forecast optimized interaction scenarios with fundamental control factors difficult to access experimentally. Simulations performed on aluminum reveal that ultra-short pulses are the natural better solution for localizing energy in space and time for F～F _th. For higher fluences, pulses spread over tens of picoseconds and ended by a final peak enable a better impulsive coupling with the nascent plasma, optimizing its maximal temperature.     

Picosecond laser ablation of thin copper films

The ablation process of thin copper films on fused silica by picosecond laser pulses is investigated. The ablation area is characterized using optical and scanning electron microscopy. The single-shot ablation threshold fluence for 40 ps laser pulses at 1053 nm has been determinated toF _thres = 172 mJ/cm². The ablation rate per pulse is measured as a function of intensity in the range of 5 × 10⁹ to 2 × 10¹¹ W/cm² and changes from 80 to 250 nm with increasing intensity. The experimental ablation rate per pulse is compared to heat-flow calculations based on the two-temperature model for ultrafast laser heating. Possible applications of picosecond laser radiation for microstructuring of different materials are discussed.     

高能电子与超强激光束作用产生的阿秒脉冲列

利用非线性汤姆孙散射的理论，从理论和数值模拟上研究了单电子在横向穿越高斯激光束束 腰时所辐射的x射线阿秒脉冲列的性质. 主要分析了电子以初始能量γ₀=1M eV—100M eV横向穿越激光振幅参数为a₀=1—10的高斯光束束腰获得的阿秒辐射脉冲的 时间 和空间性质. 计算表明，辐射呈现脉冲列的形式. 脉冲列的包络宽度取决于激光强度、束腰 的宽度以及入射电子能量. 电子的初始能量比激光强度对电子辐射脉冲的影响更大. 辐射脉 宽、脉冲间隔和脉冲包络宽度都正比于1/γ²₀，辐射功率正比于 γ⁶₀，辐射能 量正比于γ⁴₀. 当改变激光振幅a₀时，辐射功率正比 于a²₀、辐射包络中单 个脉冲脉宽正比于1/a₀、脉冲之间的间隔正比于a₀. 当保持激光强 度不变，而改变光束 束腰半径w₀时，辐射的脉冲数量、包络和辐射能量正比于w₀. 当 激光功率保 持不变时而改变激光强度和束腰半径时，脉冲包络宽度和最大辐射能量都基本不变. 当激光 振幅参数a₀=1，电子初始能量为10MeV时，激光束腰为两个激光波长时，电子 辐 射脉冲包络宽度只有14×10^-3τ₀（τ₀为入 射激光周期），达到几个阿秒的量级. 关键词： 阿秒脉冲 非线性汤姆孙散射 高斯激光光束     

Thermonuclear fusion in a strong laser field

Thermonuclear fusion induced by the irradiation of solid deuterated cluster targets and foils with fields of strong femtosecond and picosecond laser pulses is discussed. The thermonuclear-fusion process D(d, n)³He in a collision of two deuterons at an energy of 50 to 100 keV in a deuterium cluster target irradiated with a strong laser pulse is discussed. A theory of thermonuclear fusion proceeding upon the irradiation of clusters formed by deuterium iodide (DI) molecules with the field of a superintense femtosecond laser pulse is developed. This theory is based on an above-barrier process in which the sequential multiple inner ionization of atomic ions within a cluster is accompanied by field-induced outer ionization. The yield of neutrons from thermonuclear fusion in a deuteron-deuteron collision after the completion of a laser pulse is calculated. The yield of neutrons is determined for the thermonuclear-fusion reaction proceeding in the interaction of an intense picosecond laser pulse with thin TiD₂ foils. A multiple ionization of titanium atoms at the front edge of the laser pulse is considered. The heating of free electron occurs in induced inverse bremsstrahlung in the process of electron scattering on multiply charged titanium ions. The yield of alpha particles in the thermonuclear-fusion reaction involving protons and ¹¹B nuclei that is induced in microdrops by a strong laser field is determined. Experimental data on laser-induced thermonuclear fusion are discussed.     

Optical and ultrasonic monitoring of femtosecond laser filamentation in fused silica

Millimeter-long filaments and accompanying luminous plasma and defect channels created in fused silica (FS) by single focused femtosecond laser pulses with supercritical powers were probed in situ using optical imaging and contact ultrasonic techniques. Above the threshold pulse energy E_opt = 5 μJ corresponding to a few megawatt power levels pulses collapse due to self-focusing, producing channels filled by electron-hole plasma and luminescent defects, and exhibits predominantly compressive pressure transients. Analysis of the optical and ultrasonic response versus the laser pulse energy suggests that filamentary pulse propagation in the channels occurs with considerable dissipation of about ∼10 cm⁻¹. The predominant ionization mechanism is most likely associated with avalanche ionization, while the main mechanism of optical absorption is free-carrier absorption via inverse Bremsstrahlung interaction with the polar lattice.     

Effects of electron relaxation on multiple harmonic generation from metal surfaces with femtosecond laser pulses

Calculations are presented for the first four (odd and even) harmonics of an 800 nm laser from a gold surface, with pulse widths ranging from 100 down to 14 fs. For peak laser intensities above 1 GW/cm² the harmonics are enhanced because of a partial depletion of the initial electron states. At 10¹¹ W/cm² of peak laser intensity the calculated conversion efficiency for 2nd-harmonic generation is 3 × 10⁻⁹, while for the 5th-harmonic it is 10⁻¹⁰. The generated harmonic pulses are broadened and delayed relative to the laser pulse because of the finite relaxation times of the excited electronic states. The finite electron relaxation times cause also the broadening of the autocorrelations of the laser pulses obtained from surface harmonic generation by two time-delayed identical pulses. Comparison with recent experimental results shows that the response time of an autocorrelator using nonlinear optical processes in a gold surface is shorter than the electron relaxation times. This seems to indicate that for laser pulses shorter than ∼30 fs, the fast nonresonant channel for multiphoton excitation via continuum-continuum transitions in metals becomes important as the resonant channel becomes slow (relative to the laser pulse) and less efficient.     

Experimental study and computer simulations of the implantation of laser plasma ions in pulsed electric fields

Results are presented from experimental studies of pulsed plasma flows generated by nanosecond laser pulses with an intensity of 7 × 10⁸ W/cm² from a solid-state target in a strong electric field. The current pulses through the laser target and the depth distributions of the iron ions implanted in a silicon substrate to which a negative high-voltage pulse was applied are measured. The physical processes occurring in laser plasma with an initial iron ion density of 6 × 10¹⁰ cm⁻³ are simulated numerically by the particle-in-cell method for different delay times and different shapes of the accelerating high-voltage pulse. The model developed allows one to calculate the ion flows onto the processed substrate, the electron flows onto the target, and the energy spectra of the implanted ions. The results from computer simulations are found to be in good agreement the experimental data.     

Excitation of X rays by electrons accelerated in air in the wake wave of a laser pulse

The characteristics of X rays of a laser plasma generated in the interaction of a femtosecond pulse with solid targets in an air atmosphere have been investigated. It has been shown that the mechanism for the generation of X rays in the interaction of short intense laser pulses with solid targets in a gas atmosphere is attributed to the generation of fast electrons in the region of the filamentation of a laser pulse. It has been proven experimentally that under such conditions, the solid target irradiated by laser radiation of even a low density of about 10¹⁵ W/cm² very efficiently emits ∼10-keV photons. It has been shown theoretically that the maximum energy of accelerated electrons can reach ɛ_max ∼ 100–200 keV under these conditions. This means that the proposed method can provide characteristic radiation with the energy of photons much higher than 10 keV.     

Photoionization of helium with ultrashort XUV laser pulses

Coupled-channel calculations for multiphoton ionization probabilities of helium through interaction with intensive short laser pulses are presented. Besides Slater-like orbitals we use regular Coulomb wavepackets in our configurational interaction basis to describe the continuum. Linearly polarized laser pulses of 3.8 fs duration and 2.96 x 10¹⁴ Wcm^-2 peak intensity have been used for frequencies between 0.2-1.2 a.u. The results are compared with other ab initio calculations.Received: 8 April 2003, Published online: 9 September 2003PACS: 32.80.Fb Photoionization of atoms and ions - 32.80.Wr Other multiphoton processes     

Angular distributions of CH3I fragment ions under the irradiation of single pulse and trains of ultrashort laser pulses

The angular distribution of CH₃I is investigated experimentally using a single Fourier transform-limited laser pulse and a pulse train, where a 90-fs 800-nm linearly polarized laser field with a moderate intensity of 2.8×10¹³ W/cm² is used. The dynamic alignment is demonstrated in a single pulse experiment. Moreover, a pulse train is used to optimize the molecular alignment, and the alignment degree is almost identical to that with the single pulse. The results are analysed by using chirped femtosecond laser pulses, and it demonstrates that the structure of pulse train rather than its effective duration is crucial to the molecular alignment.