膦化聚2,6—二甲基1,4—苯醚负载钯催化剂的表征及其催化性能

报道了四种不同P/Pd摩尔比的膦化聚2,6-二甲基1,4-苯醚负载把催化剂的加氢和异构化性能;通过XPS、电镜和远红外对催化剂进行了表征;并考察了溶剂和温度对催化剂活性的影响.     

A Facile and In-situ Methanol-mediated Fabrication of Low Pd Loading,High-efficiency and Size-selectivity Pd@ZIF-8 Hydrogenation Catalyst

In-situ encapsulation of tiny and well-dispersed Pd nanoparticles (Pd NPs) in zeolitic imidazolate frameworks (ZIFs) was firstly achieved using a one-pot and facile methanol-mediated growth approach, in which methanol served as both solvent and a mild reductant. The microstructure, morphology, crystallinity, porosity as well as evolution process of the catalysts were determined by TEM, XRD, N₂ adsorption and UV-vis spectra. Due to the complete encapsulation of such Pd NPs combined with ultrahigh surface area and uniform microporous structure of ZIF-8, the resulting Pd@ZIF-8-60 min nanocomposite exhibited more superior catalytic activity for olefins hydrogenation with TOF of 7436 h⁻¹ and excellent size selectivity than previously reported catalysts. Furthermore, the catalyst displays excellent recyclability for 1-octene hydrogenation and without any loss of the Pd active species.     

Selective hydrogenation of styrene/1-octene mixtures over a monolithic Pd catalyst

Mixtures of styrene and 1-octene in toluene were hydrogenated over a monolithic Pd catalyst in the three-phase regime. Styrene was preferably hydrogenated to ethylbenzene, while a major part of the initial quantity of 1-octene was isomerized to internal olefins. Formation of alkylcyclohexanes was negligible. Observed rates of styrene hydrogenation were high compared to the values listed in literature.     

Specific features of the catalytic behavior of supported palladium nanoparticles in heterogeneous catalytic reactions

Specific features of the catalytic behavior of supported palladium nanoparticles were analyzed in terms of both the size of the particles and their interaction with the support. The influence of these factors on the activity and selectivity of palladium nanoparticles in carbon-carbon bond hydrogenolysis, hydrogenation of aromatic compounds, olefins, and acetylenes, hydrodechlorination, as well as complete oxidation of organic compounds was discussed. It was shown that the optimal nanoparticle size depends on the type of the reaction and also such factors as the nature of interaction between the nanoparticles and support, absorptivity of the substrates and catalytic reaction products, and electronic and crystal structure of the nanoparticles.     

New processes for the selective production of 1-octene

Linear α-olefins, especially 1-hexene and 1-octene, are key components for the production of LLDPE and the demand for 1-hexene and 1-octene increased enormously in recent years. To meet this demand several processes were developed in the last decade to produce 1-hexene and 1-octene selectively. Here we review the new processes for 1-octene production based on homogeneous catalysts.Sasol's coal-based high temperature Fischer–Tropsch technology produces an Anderson–Schulz–Flory distribution of hydrocarbons with high α-olefin content and the desired alkenes, including 1-heptene and 1-octene, are separated by distillation. In this case, as in the SHOP process, 1-octene constitutes only a minor part of the total yield.Nowadays other technologies are being applied or considered for on-purpose 1-octene production: hydroformylation of 1-heptene, the telomerization of 1,3-butadiene, and ethene tetramerization.1-Heptene can be converted in three steps to 1-octene: (1) hydroformylation of 1-heptene to octanal, (2) hydrogenation of octanal to 1-octanol, and (3) dehydration of 1-octanol to 1-octene. This process was commercialized by Sasol.Dow commercialized a process based on butadiene. Telomerization of butadiene with methanol in the presence of a palladium catalyst yields 1-methoxy-2,7-octadiene, which is fully hydrogenated to 1-methoxyoctane in the next step. Subsequent cracking of 1-methoxyoctane gives 1-octene and methanol for recycle. Recently highly active and stable phosphine based systems were reported that show particularly good performance for the industrially attractive feedstock, the C₄ cut of the paraffin cracker.1-Hexene can be obtained by ethene trimerization by a family of catalysts based mainly on Cr. High selectivity to 1-hexene can be achieved thanks the propensity of the chromium based catalyst to form 7-membered ring metallacycles. Sasol has found catalyst systems that allow the formation of a 9-membered metallacycle in large proportion relative to 7-membered ring formation, yielding 1-octene.     

Palladium nanoparticles stabilized by alkylated polyethyleneimine as aqueous biphasic catalysts for the chemoselective stereocontrolled hydrogenation of alkenes

Palladium nanoparticles were prepared, stabilized, and dispersed in water by alkylated branched polyethyleneimine. The palladium nanoparticles were effective aqueous biphasic catalysts for the chemoselective hydrogenation of alkenes with preferential reduction of less hindered double bonds, such as reduction of 3-methylcyclohexene in the presence of 1-methylcyclohexene and 1-octene in the presence of 2-methyl-2-heptene. [structure: see text].     

Palladium(II) mediated aziridination of olefins with bromamine-T as the nitrogen source: scope and mechanism

The palladium(II)-promoted reaction of a variety of olefins and bromamine-T provided N-tosyl-2-substituted aziridines under mild conditions. Olefins bearing chiral appendages gave only a poor to modest diastereoselectivity. Appropriate deuterated olefins were selected to study the stereochemistry of the reaction. A Pd(IV) intermediate is proposed as the aziridinating species.     

锰配合物催化加氢反应的研究进展

过渡金属催化不饱和有机化合物的加氢反应具有原子经济性高、绿色环保等优点,一直是有机化学研究的重点和难点.当前加氢反应中最常用的催化剂主要是铑、钌、铱、钯等贵金属,以储量丰富的金属锰作为催化剂更符合可持续发展的要求,在过去的几年中,锰催化的醛、酮、酯、腈、酰胺等不饱和化合物的氢化反应得以实现.我们系统地总结了锰配合物在加...     

Characterization of a Polymer-Bound Palladium Acetate Catalyst and Studies on the Selective Hydrogenation of Dienes and Alkynes

Abstract

Palladium(II) acetate has been anchored onto a copolymer support containing pyridyl and carboxyl groups. XPS studies showed the Pd 3d binding energies for the recovered catalyst to be less by 1 eV after being used in hydrogenation studies. However, x-ray studies and a chemical test based on KCN treatment failed to reveal any palladium oxide or palladium metal formation in the recovered catalyst. It is presumed that an acetate ligand is lost during hydrogenation, which could be the reason for the lowering of the palladium 3d binding energies in the recovered catalyst. Results of investigations of the hydrogenation of olefins and selectivity of the catalyst toward the hydrogenation of dienes and alkynes are presented. The loss of palladium due to leaching under the reaction conditions employed was found to be very low (<1%/cycle).     

聚苯乙烯苄基(8-氨基喹啉)负载鈀催化剂的催化加氢性能

本文在带有8-氨基喹啉螯合基团的树脂上负载了二氯化钯,再经甲醇-水还原合成混合价态钯催化剂。考察并比较了两类催化剂的加氢活性及选择性,发现混合价态钯催化剂具有活性高、选择性强、金属不易流失的特点。     

Alkene hydrogenation over palladium supported on a carbon–silica material

Palladium catalysts supported on a carbon–silica material were synthesized. Hydrogenation by molecular hydrogen was studied in the presence of straight-chain and cyclic olefins. As distinct from what is observed for olefins having a phenyl substituent, for aliphatic alkenes the reaction rate decreases with an increasing conversion due to the accumulation of hydrogenation products. The synthesized palladium catalysts show a higher hydrogenation activity than Pd/C.     

含氨基酸侧链的有机硅高分子催化剂——Ⅸ.聚γ-(甘-色二肽基)丙基硅氧烷钯催化剂的合成、加氢活性及结构表征

本文报道了不同N/Pd摩尔比的聚γ-(甘-色二肽基)丙基硅氧烷钯催化剂的合成及对烯烃和硝基苯的加氢活性.催化剂的结构表征说明,其活性中心的组成可能是氨基酸配体的羧基与PdCl_2的络合.这种催化剂对丙烯腈和苯乙烯有较高的加氢活性,而对硝基苯的氢化没有催化活性.并研究了溶剂和温度对加氢活性的影响.     

The properties of Pd/Au bimetallic colloidal catalysts stabilized by chitosan and prepared by simultaneous and stepwise chemical reduction of the precursor ions

Bimetallic Pd/Au nanoparticle catalysts were prepared with chitosan as a stabilizer. The preparation procedure included mixing or stepwise adding palladium and gold ions in various molar ratios followed by simultaneous or stepwise reduction using either methanol or sodium borohydride (nb) as reducing agents. TEM and UV-Vis characterization showed that the particle size of bimetallic Chi-Pd/Au prepared by simultaneous reduction was smaller than that of the samples prepared by stepwise reduction methods. The particle size varied in the 1 to 24 nm range at all Pd/Au molar ratios of bimetallic compositions. Sodium borohydride was the most effective reducing agent for the preparation of bimetallic Chi-Pd_coreA_ushell by the stepwise reduction. The catalytic activities of Chi-Pd/Au prepared by either simultaneous or stepwise reductions were generally higher than those of the respective monometallic systems whereas the most active catalysts were prepared by the simultaneous reduction. Shielding the palladium metal colloid with gold sol led to the decrease in catalytic activity. The turnover frequencies (TOFs) for Chi-Pd/Au-me in catalytic hydrogenation of 1-octene were as high as 20.855 and 89.336 for monometallic and bimetallic catalysts respectively. TOFs for Chi-Pd/Au-nb were in the region between 2.978 and 87.429. The core-shell and alloy formation of the bimetallic Chi-Pd/Au were inferred from the particle size measurements and evaluation of catalytic activity.     

Catalytic activity of a supported palladium–benzimidazole complex toward alkene hydrogenation

A polymer anchored palladium complex was synthesized by sequential attachment of benzimidazole and palladium chloride to chloromethylated polystyrene divinyl benzene co-polymer with 6.5 % cross-linking. The product was characterized by XPS, UV–vis. spectrophotometry, FTIR and TGA. Various physico-chemical properties such as bulk density, surface area and swelling behavior in different solvents were also measured. The polymer anchored complex was tested as a catalyst for reduction of olefins. The kinetics of hydrogenation of 1-hexene was studied by varying the temperature, catalyst concentration and substrate concentration. The energy and entropy of activation were evaluated from the kinetic data. The catalyst could be recycled a number of times and no leaching of metal from the catalyst surface was observed.     

Hydrogenation of olefins in supercritical CO(2) catalyzed by palladium nanoparticles in a water-in-CO(2) microemulsion

Nanometer-sized metallic palladium particles can be synthesized by hydrogen reduction of Pd2+ ions dissolved in the water core of a water-in-CO2 microemulsion. The Pd nanoparticles, stabilized by the micromeulsion and uniformly dispersed in the supercritical fluid phase, are effective catalysts for hydrogenation of olefins. Examples of rapid and efficient hydrogenation of water-soluble and CO2-soluble olefins catalyzed by the Pd nanoparticles in supercritical CO2 are given.     

New supramolecular transition metal catalysts

The covalent connection of a catalytically active transition metal center with a water-soluble receptor (host molecule) generates a new type of supramolecular catalyst in which the features of molecular recognition, phase transfer catalysis and transition metal catalysis are combined in a single system. The first examples of this principle make use of commercially available β-cyclodextrin (β-CD) as the receptor and rhodium complexes of diphosphanes as the catalytically active center, these being covalently connected to one another via a spacer. In competitive hydrogenation of certain olefins, unusual degrees of substrate selectivity based on molecular recognition are observed, not possible by conventional transition metal catalysts. The two-phase (water/organic) hydrogenation of nitro-aromatics also is a smooth process catalyzed by these supramolecular complexes. They also constitute an unusually active catalyst system for the selective hydroformylation of higher olefins such as 1-octene in a two-phase system. Dendrimers having diphosphane moieties on the surface provide ligands for transition metals, the corresponding metal complexes (e.g., Pd) functioning as efficient catalysts which can be recycled due to their nanoscopic properties.     

Modular Bidentate Hybrid NHC‐Thioether Ligands for the Stabilization of Palladium Nanoparticles in Various Solvents

The synthesis of four different bidentate hybrid NHC‐thioether ligands is presented. The corresponding palladium nanoparticles are stable in various solvents, depending on the ligand used, and show high chemoselectivity in the hydrogenation of olefins. The solubility of the nanoparticles can be switched multiple times depending on the pH value of the solvent. XPS analysis (which shows a subtle shift in the binding energy) was identified as a convenient tool to establish the binding mode of NHC ligands.     

聚N—乙烯基吡咯烷酮分散钯催化剂加氢性能的研究

制备了聚N-乙烯基吡咯烷酮分散钯催化剂,考察了它对不同底物的加氢活性和在不同介质中对丙烯酸甲酯的加氢活性。结果表明,不同底物的加氢活性和反应级数都有很大的差别,且反应介质对丙烯酸甲酯的加氢速率也有很大影响。还得到了丙烯酸甲酯加氢反应的速率方程。     

Asymmetric Hydrogenations (Nobel Lecture)

The start of the development of catalysts for asymmetric hydrogenation was the concept of replacing the triphenylphosphane ligand of the Wilkinson catalyst with a chiral ligand. With the new catalysts, it should be possible to hydrogenate prochiral olefins. Knowles and his co‐workers were convinced that the phosphorus atom played a central role in this selectivity, as only chiral phosphorus ligands such as (R,R)‐DIPAMP, whose stereogenic center lies directly on the phosphorus atom, lead to high enantiomeric excesses when used as catalysts in asymmetric hydrogenation reactions. This hypothesis was disproven by the development of ligands with chiral carbon backbones. Although the exact mechanism of action of the phosphane ligands is not incontrovertibly determined to this day, they provide a simple entry to a large number of chiral compounds.     

The irreversible formation of palladium carbide during hydrogenation of 1-pentyne over silica-supported palladium nanoparticles: in situ Pd K and L3 edge XAS

The catalytically active phase of silica-supported palladium catalysts in the selective and non-selective hydrogenation of 1-pentyne was determined using in situ X-ray absorption spectroscopy at the Pd K and L(3) edges. Upon exposure to alkyne, a palladium carbide-like phase rapidly forms, which prevents hydrogen to diffuse into the bulk of the nano-sized particles. Both selective and non-selective hydrogenation occur over carbided particles. The palladium carbide-like phase is stable under reaction conditions and only partially decomposes under high hydrogen partial pressure. Non-selective hydrogenation to pentane is not indicative of hydride formation. The palladium carbide phase was detected in the EXAFS analysis and the K edge XANES showed representative features.