SYNTHESIS AND CHARACTERIZATION OF HETEROAROMATIC POLYMERS CONTAINING PYRIDINE MOIETIES

1. INTRODUCTION The new kinds of heteroaromatic polymers have been important topics in polymer science fields since they were developed at 1960s in order to meet demands for heat-resistant plastics for space and military applications. Because heteroaromatic polymers exhibit excellent thermal and chemical stability, outstanding electrical and mechanical properties, good solvent resistance, and dimensional stability, these polymers have found usage as adhesives, coatings, matrix resins, film…     

Soluble blue light emitting pyridine-containing polymers prepared by oxidative-coupling copolymerization

Novel polymers containing pyridine moieties in main chains have been prepared by facile oxidative-coupling co-polymerization of pyridine N-oxide with N-alkyl carbazole and fluorene as the precursor polymers, which were reduced to the pyridine-containing polymers respectively. The polymers were characterized by FT-IR, ¹H NMR, UV-Vis, X-ray, thermo-gravimetric analysis, and fluorescence spectroscopy. The pyridine-containing polymers good solubility in convenient organic solvents, high thermal stability with the onset decomposition temperature above 310 °C. The electrochemical behaviors of the polymers were investigated by cyclic voltammetry; the HOMO and LUMO energy level of the polymers were estimated from the electrochemistry and UV-Vis spectroscopy. The fluorescence spectra of the pyridine-containing polymers display blue light emitting properties in both solution and solid-state film.     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.     

主链含吡啶环的聚合物

介绍了国内外有关主链含吡啶环聚酰胺、聚酰亚胺、聚苯并咪唑、聚吡咙、聚酯以及聚氨酯等芳杂环或杂链高分子的研究，特别着重于含吡啶环的二元酚、二元酸、二元胺、四元胺类单体以及主链含吡啶环聚合物的分子设计、合成反应、结构与性能表征等。     

Cobalt(III)-catalyzed cycloaddition polymerization of diynes with nitriles: Synthesis of polymers containing pyridine moieties in the main chain

The synthesis of pyridine-containing polymers was carried out by the cycloaddition of diynes with nitriles in the presence of organocobalt complexes as catalysts. As a model experiment, the pyridine-formation reaction of monofunctional acetylenes with nitriles was reexamined in detail in the presence of organocobalt catalysts, from which the combination of terminal aliphatic acetylenes and aromatic nitriles was proved to be suitable for the specific pyridine-formation process. On the basis of this result, the polymerization of terminal aliphatic diynes with aromatic nitriles was carried out in the presence of the cobalt catalyst (10 mol %) to give polymers containing substituted pyridine moieties in the main chain in high yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1979–1986, 1999     

Gas transport properties of novel poly(arylene ether ketone)s containing dibenzoylbiphenyl and benzonaphthone moieties

In this work we present the results from studies on novel poly(arylene ether ketone)s, including gas permeability, wide-angle x-ray diffraction (WAXD), and dynamic mechanical analysis (DMA). Poly(arylene ether ketone)s containing 2,2′- and 3,3′-dibenzoylbiphenyl (DBBP) moieties were characterized to study the effect of biphenyl substitution on gas transport properties. Gas permeabilities of naphthalene-containing poly(arylene ether ketone)s were also measured. Higher permeabilities were observed for polymers prepared with 6F-BPA, compared to 9,9-bis(4-hydroxyphenyl)fluorene (HPF). The naphthalene-containing polymers exhibited higher permeabilities than the DBBP polymers, except for a polymer having the 2,2′-DBBP and tetramethylbiphenyl moieties. Based on our work, and results reported in the literature, the 3,3′-DBBP polymers showed the lowest permeabilities for DBBP-containing poly-(arylene ether ketone)s. The low permeabilities are due to more efficiently packed chains brought on by greater flexibility of the backbone, compared to the other polymers studied. DMA studies confirmed the higher barriers to rotation which are believed to be responsible for 2,2′-DBBP polymers having similar selectivities compared to 3,3′-DBBP polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 425–431, 1998     

Synthesis and properties of poly(thioether amide)s from 2,6-bis(acrylamido)pyridine and dithiols

Poly(thioether amide)s containing pyridine moieties in their backbone were obtained by the polyaddition of 2,6-bis(acrylamido)pyridine (2,6-BAAP), derived from 2,6-diaminopyridine and acryloyl chloride, with an aromatic or aliphatic dithiol. The influence of various reaction conditions on the polyaddition was investigated in comparison with the polyaddition of 1,3-bis (acrylamido)benzene (1,3-BAAB). 2,6-BAAP gave the polymer even in the absence of any initiator at lower temperatures while 1,3-BAAB did not, which was attributable principally to intramolecular base catalysis of the pyridine moieties. Basic additives effectively promoted the reaction rate and increased the chain length. Those facts and NMR of the resulting polymers indicated Michael-type polyaddition. The polymers from 2,6-BAAP were amorphous and gave transparent and tough films having a high refractive index exceeding 1.7. GPC and DSC characterizations were also made. © 1993 John Wiley & Sons, Inc.     

含二氦杂萘酮结构全芳香杂环聚合物的研究进展

高性能高分子材料在高温下仍保持优异的综合性能,是航空航天、电子电气、高速轨道交通等重要高技术领域不可或缺的材料。在不牺牲耐热性能的前提下改善高性能聚合物的加工性能一直是国内外研究的热点。含二氮杂萘酮结构高性能聚合物是高性能高分子材料的新成员。本文主要综述了含二氮杂萘酮结构的聚芳醚（包括聚芳醚砜酮系列、聚芳醚腈砜酮系列、...     

Synthesis of a new aromatic diacid containing pyridine ring and related polybenzimidazole

<正>A new aromatic diacid monomer containing pyridine unit,4-phenyl-2,6-bis[4-(4-carboxyphenoxy) phenyl]pyridine 3,was successfully synthesized in three steps,starting from 4-hydroxyacetophenone.The corresponding pyridine-containing polybenzimidazole was prepared via polycondensation of 3 with tetraaminodiphenyl ether(TADE) in poly(phosphoric acid)(PPA).The resulting polybenzimidazole exhibits excellent solubility,good thermal stabilities and high thermal resistance.     

Bandgap Engineering through Controlled Oxidation of Polythiophenes

The use of Rozen’s reagent (HOF?CH₃CN) to convert polythiophenes to polymers containing thiophene‐1,1‐dioxide (TDO) is described. The oxidation of polythiophenes can be controlled with this potent, yet orthogonal reagent under mild conditions. The oxidation of poly(3‐alkylthiophenes) proceeds at room temperature in a matter of minutes, introducing up to 60 % TDO moieties in the polymer backbone. The resulting polymers have a markedly low‐lying lowest unoccupied molecular orbital (LUMO), consequently exhibiting a small bandgap. This approach demonstrates that modulating the backbone electronic structure of well‐defined polymers, rather than varying the monomers, is an efficient means of tuning the electronic properties of conjugated polymers.     

新型氯取代含杂萘联苯结构可溶性聚芳酰胺的合成、表征和性能

以类双酚单体4-(3-氯-4-羟基-苯基)-2H-二氮杂萘-1-酮(DHPZ-OC)和对氯苯腈为原料进行亲核取代反应合成二腈化合物4-[3-氯-4-(4-氰基苯氧基)苯基]-2-(4-氰基苯基)二氮杂萘-1-酮(),然后在碱性(KOH)条件下进行水解制得了一种新型的含氯取代杂萘联苯结构的芳香二酸,4-[3-氯-4-(4-羧基苯氧基)苯基]-2-(4-羧基苯基)二氮杂萘-1-酮().用新二酸与各种芳香二胺进行直接缩合聚合制得了一系列新型氯取代含杂萘联苯结构的聚芳酰胺,特性粘度可达1.23dL/g.用FTIR和¹HNMR研究了新型二酸单体及聚合物的结构.该类聚芳酰胺均可溶解于NMP,DMAc和DMSO等极性有机溶剂中,并且可浇铸成透明韧性膜,其玻璃化转变温度在291～332℃之间,10%的热失重温度在460℃以上.     

Influence of charge on anion receptivity in amide-based macrocycles

Binding and structural aspects of anions with tetraamido/diquaternized diamino macrocyclic receptors containing m-xylyl, pyridine, and thiophene spacers are reported. (1)H NMR studies indicate that the quaternized receptors display higher affinities for anions compared to corresponding neutral macrocycles. The macrocycles containing pyridine spacers consistently display higher affinity for a given anion compared to those with either m-xylyl or thiophene spacers. The m-xylyl- and pyridine-containing receptors exhibit high selectivity for H(2)PO(4)(-) in DMSO-d(6) with association constants, K(a) = 1.09 × 10(4) and >10(5) M(-1), respectively, and moderate selectivity for Cl(-) with K(a) = 1.70 × 10(3) and 5.62 × 10(4) M(-1), respectively. Crystallographic studies for the Cl(-) and HSO(4)(-) complexes indicate that the m-xylyl-containing ligand is relatively elliptical in shape, with the two charges at ends of the major axis of the ellipse. The anions are hydrogen bonded with the macrocycle but are outside the ligand cavity. In the solid state, an unusual low-barrier hydrogen bond (LBHB) was discovered between two of the macrocycle's carbonyl oxygen atoms in the HSO(4)(-) complex. The pyridine-containing macrocycle folds so that the two pyridine units are face-to-face. The two I(-) ions are chelated to the two amides adjacent to a given pyridine. In the structure of the thiophene containing macrocycle with two BPh(4)(-) counterions, virtually no interaction was observed crystallographically between the macrocycle and the bulky anions.     

Novel heterocyclic poly(pyridine‐imide)s with unsymmetric carbazole substituent and noncoplanar structure: High thermal,mechanical and optical transparency,electrochemical, and electrochromic properties

A diamine containing heterocyclic pyridine and unsymmetrical carbazole substituents, 4‐(9‐ethyl‐3‐carbazole)‐2,6‐bis(4‐aminophenyl)pyridine ( CBAPP ), was prepared for use in the synthesis of poly(pyridine‐imide)s PI‐1–8 by direct polycondensation with dianhydrides in N,N‐dimethylacetamide (DMAc). The poly(pyridine‐imide)s derived from the diamine are highly soluble in solvents such as N‐Methyl‐2‐pyrrolidone (NMP) and DMAc at room temperature. Noncoplanar polyimide (PI‐1) showed excellent solubility, high transparency, and high‐performance mechanical properties. These polymers had relatively high glass transition temperatures and exhibited good thermal stability in both nitrogen (T_d10 > 470 °C) and air (T_d10 > 450 °C). The PI‐3～5 cannot form flexible and tough films due to the unsymmetrical carbazole moiety, rigid structure, and polar–polar interaction. However, through copolymerization technique these polymers (PI‐6～8) could be enhanced through the solubility, mechanical, and thermal properties. The optical properties included a strong orange fluorescence (540 nm) after protonation with acid. When the HCl concentration was increased, a new absorption band at approximately 350 nm appeared, and the intensity of the fluorescent peak at 380 nm observed in the neutral polymer solution decreased, along with the appearance of the new fluorescent peak at 540 nm. The poly(pyridine‐imide)s presented here showed only slight fluorescence quenching in the presence of methanol. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 405–412     

主链含邻位取代单元及吡啶环聚酰亚胺的合成与性能

以o-羟基苯乙酮、对氯硝基苯和苯甲醛为原料,通过亲核取代反应、改进的Chichibabin反应以及水合肼催化还原合成了一种新型含邻位取代单元及吡啶环的芳香二胺4-苯基-2,6-双[3-(4-氨基苯氧基)苯基]吡啶(o,p-PAPP).以N,N-二甲基甲酰胺(DMF)为溶剂,将o,p-PAPP分别与3,3',4,4'-二苯醚四羧酸二酐(ODPA)、2,2-双[4-(3,4-二羧基苯氧基)苯基]丙烷二酐(BPADA)、3,3',4,4'-二苯酮四甲酸二酐(BTDA)及均苯四甲酸二酐(PMDA)通过常规的两步法,合成了4种聚酰亚胺.用FTIR、DSC、TGA、XRD、溶解性测试、UV-Vis和荧光光谱对聚合物的结构和性能进行了表征.FTIR结果表明,所得的聚合物在1780,1720和1380cm-1左右出现了聚酰亚胺的特征吸收峰.实验所得的PI能很好地溶解于常见有机溶剂(如DMF,DMAC,DMSO,NMP,THF,CHCl3),在氮气氛中,PI的10%失重温度(T10)为444.2～467.5℃,800℃时的残余质量(Rw)为49.6%～58.3%.同时PI分子主链中的吡啶环结构使其具有良好的紫外光吸收性能,经HCl质子化后,在460 nm附近出现非常强的荧光发射峰.     

Synthesis of a new pyridine-containing diamine and related polyimide

<正>A new kind of aromatic diamine monomer containing pyridine unit,2,6-bis[4-(4-aminophenoxy)phenoxy]pyridine(BAPP),was synthesized in three steps,using hydroquinone as starting material.A novel pyridine-containing polyimide was prepared from the resulting diamine BAPP with 4,4'-oxydiphthalic anhydride(ODPA) via a conventional two-step thermal imidization method.The resulting polyimide exhibits excellent solubility,film-forming capability and high thermal resistance.     

Synthesis,characterization, and properties of regioregular conjugated polymers containing quaterthiophene and an acceptor repeating units

Novel donor–acceptor type polymers consisting of alternating quaterthiophene and an electron withdrawing moiety, pyrazinyl or pyridinyl, have been prepared using Stille coupling approach with moderate yields. The polymers were highly soluble in common organic solvents such as tetrahydrofuran and chloroform. The structure and optical properties of the polymers were characterized by NMR, UV‐vis and fluorescence spectroscopy, and cyclic voltammetry, respectively. The polymer having pyrazine unit exhibited a red‐shift in both absorption and emission in comparison with those analogs containing pyridine because of strong electron withdrawing character of the pyrazinyl group. The polymer containing pyrazinyl as acceptor units also depicted decrease in its optical and electrochemical bandgap relative to those polymers containing 2,5‐ or 2,6‐pyridine moieties. The electrochemical behavior showed facile n‐doping and p‐doping properties of those polymers consisting of alternating quaterthiophene and the acceptor moiety. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2163–2171, 2009     

Synthesis and characterization of novel germanium‐containing poly(p‐phenylenevinylene) derivatives

Novel blue‐emitting germanium‐containing poly(p‐phenylenevinylene) (PPV) derivatives with well‐defined conjugation lengths were synthesized via Wittig‐condensation polymerizations. The polymers can be color‐tuned by the introduction of various chromophores into the PPV‐based polymer backbones. The photoluminescence (PL) spectra of the polymers, GePVK (containing carbazole moieties), GeMEH (containing dialkoxybenzene moieties), and GePTH (containing phenothiazine moieties), were found to exhibit blue, greenish blue, and green emissions, respectively. GePTH produces more red‐shifted emission than GeMEH and GEPVK, resulting in green emission, and the solution and solid state PL spectra of GePVK consist of almost blue emission. The electroluminescence spectra of GeMEH and GePTH contain yellowy green and yellow colors, respectively. Interestingly, GePVK exhibits white emission with CIE coordinates of (0.33, 0.37) due to electroplex emission in the light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 979–988, 2008     

Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of new poly(arylene ether)s containing heterocyclic units. II.

A series of new poly(arylene ether)s, containing naphthalene, pyridine, and quinoline units have been prepared by solution condensation polymerization. The synthesis involves nucleophilic displacement of aromatic dihalides with aromatic potassium bisphenates in an anhydrous dipolar aprotic solvent at elevated temperatures. The polymers, having inherent viscosity from 0.24 to 1.32 dL/g, were obtained in quantitative yield, have excellent thermal stability as shown by 10% weight loss temperatures in nitrogen and air (above 450 and 430°C, respectively) and high glass transition temperatures (in the range of 150–220°C). The introduction of quinoline moieties in the polymer backbone positively influences the thermal properties, such as high T_g/T_m ratios. © 1995 John Wiley & Sons, Inc.     

Synthesis of poly(ether-ketone-amide)s by palladium-catalyzed polycondensation of aromatic dibromides containing ether ketone structure,aromatic diamines,and carbon monoxide

Aromatic poly(ether-ketone-amide)s were prepared by the palladium-catalyzed polycondensation of aromatic dibromides containing ether ketone units, aromatic diamines, and carbon monoxide. Polymerizations were carried out in N,N-dimethylacetamide (DMAc) in the presence of palladium catalyst, triphenylphosphine, and 1,8-diazabicyclo [5,4,0]-7-undecene (DBU), and resulted in poly(ether-ketone-amide)s with inherent viscosities up to 0.82 dL/g under mild conditions. The polymers were quite soluble in strong acid, dipolar aprotic solvents, and pyridine. Thermogravimetry of the polymers showed excellent thermal stability, indicating that 10% weight losses of the polymers were observed in the range above 400°C in nitrogen atmosphere. The glass transition temperatures of the polymers were about 200°C, which are higher than those of poly(ether-ketone) analogues. These polymers also showed good tensile strength and tensile modulus. © 1994 John Wiley & Sons, Inc.