Aminopyrene functionalized mesoporous silica for the selective determination of resorcinol

Aminopyrene was convalently anchored onto the surface of mesoporous MCM-41 silica by post-grafting. This organic-inorganic hybrid has been applied as sensing material to phenols determination. Experimental results reveal that the functionalized material presents good sensitivity and selectivity towards resorcinol and can be used for resorcinol determination in water at pH 6.0. The fluorescence intensity of aminopyrene functionalized mesoporous silica decreases proportionally to the logarithm of resorcinol concentration in water. The linear range for resorcinol detection lies in 4.79-163 μM with a detection limit of 2.86 μM (S/N = 3).     

NSAID naproxen in mesoporous matrix MCM-41: drug uptake and release properties

Hexagonally ordered mesoporous silica material MCM-41 (S_BET?=?1090?m²/g, pore size?=?31.2 ?) was synthesized and modified by 3-aminopropyl ligands. The differences in an uptake and subsequent release of anti-inflammatory drug naproxen from unmodified and amino modified MCM-41 samples were studied. The prepared materials were characterized by high resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM), nitrogen adsorption/desorption, Fourier-Transform Infrared Spectroscopy (FT-IR), Small-angle X-ray scattering (SAXS), thermoanalytical methods (TG/DTA) and elemental analysis. The amount of the drug released was monitored with thin layer chromatography (TLC) with densitometric detection in defined time intervals. The amounts of the released naproxen from mesoporous silica MCM-41/napro and amine-modified silica sample A-MCM-41/napro were 95 and 90% of naproxen after 72?h. In this study we compare the differences of release profiles from mesoporous silica MCM-41 and mesoporous silica SBA-15.     

Rare earth (Eu, Tb) mesoporous hybrids with calix[4]arene derivative covalently linking MCM-41: Physical characterization and photoluminescence property

MCM-41 mesoporous silica has been functionalized with two kinds of macrocylic calixarene derivatives Calix[4] and Calix[4]Br (Calix[4]=P-tert-butylcalix[4]arene, Calix[4]Br=5.11,17.23-tetra-tert-butyl-25.27-bihydroxy-26.28-bibromopropoxycalix[4]arene) through condensation approach of tetraethoxysilane (TEOS) in the presence of the cetyltrimethylammonium bromide (CTAB) surfactant as a template. Novel organic-inorganic mesoporous luminescent hybrid containing RE³⁺ (Eu³⁺, Tb³⁺) complexes covalently attached to the functionalized ordered mesoporous MCM-41, which are designated as RE-Calix[4]-MCM-41 and RE-Calix[4]Br-MCM-41, respectively, are obtained by sol-gel process. It is found that they all have high surface area, uniform in the mesostructure and good crystallinity. Measurement of the photoluminescence properties show the mesoporous material covalently bonded Tb³⁺ complexes (Tb-Calix[4]-MCM-41 and Tb-Calix[4]Br-MCM-41) exhibit the stronger characteristic emission of Tb³⁺ and longer lifetime than the corresponding Eu-containing materials Eu-Calix[4]-MCM-41 and Eu-Calix[4]Br-MCM-41 due to the triplet state energy of modified organic ligands Calix[4]-Si and Calix[4]Br-Si match with the emissive energy level of Tb³⁺ very well.     

Preparation and synergetic catalytic effects of amino-functionalized MCM-41 catalysts

Four amine functionalized mesoporous catalysts were synthesized by grafting primary, dualistic and two secondary amines onto the channel walls of mesoporous silica, MCM-41. We examined the effects of organoamine loading amount on the acid-base synergism of the catalysts in the self-condensation reaction of n-butanal, a Knoevenagel condensation and a Henry reaction. We observed the balance of the amine and residual silanol amounts is crucial to the catalytic performances of the functionalized mesoporous catalysts. An optimum organoamine loading amount exists, which is dependent on the organoamine type. There is little difference in the optimum organoamine loading amount between different reactions. The secondary organoamine functionalized MCM-41 exhibits the best catalytic performance in the experimental range.     

Mesostructured chitosan-silica hybrid as a biodegradable carrier for a pH-responsive drug delivery system

A biodegradable mesoporous chitosan-silica hybrid has been synthesized by self-assembly of non-toxic F127 Pluronic non-ionic surfactant, biodegradable chitosan and silica source through a real liquid-crystal templating route. On the basis of these biodegradable hybrids, we developed a facile one-pot pH-responsive drug delivery system relying on the coordinate bonding of a "host-metal-guest" architecture. Here, the "host", "metal" and "guest" represent amino groups of chitosan units, metal ions and drug molecules, respectively. Here, daunorubicin (DNR) was chosen as a typical anti-cancer drug molecule, the release of which can be achieved through the cleavage of the coordination bonds that are sensitive to variations in external pH at weak acidic conditions. The successful release of DNR has been observed at pH 5-6, while negligible release has been observed under physiological conditions. The existence of chitosan in the mesoporous silica enhanced both the biodegradability and the strength of the "host-metal-guest" coordination bond.     

Maghemite nanocrystal impregnation by hydrophobic surface modification of mesoporous silica

Here, we report the design of a hybrid inorganic/organic mesoporous material through simultaneous pore engineering and hydrophobic surface modification of the intramesochannels to improve the uptake of superparamagnetic maghemite nanocrystals via impregnation techniques. The mesoporous material of the SBA-15 type was functionalized in situ with thiol organo-siloxane groups. Restricting the addition of the thiol organo-siloxane to 2 mol % yielded an inorganic/organic hybrid material characterized by large pores and a well-ordered hexagonal p6mm mesophase. The hydrophobic surface modification promoted the incorporation of 7.5 nm maghemite (gamma-Fe2O3) nanocrystals, prepared through temperature-controlled decomposition of iron pentacarbonyl in organic solvents. The hydrophobic, oleic acid capped superparamagnetic maghemite nanocrystals were incorporated into the porous network via wet impregnation from organic suspensions. Combining diffraction, microscopy, and adsorption data confirmed the uptake of the nanocrystals within the intramesochannels of the silica host. Magnetization dependencies on magnetic field at different temperatures show a constriction in the loop around the origin, which indicates immobilization of maghemite nanocrystals inside the thiol-functionalized silica host.     

Functionalized bimodal mesoporous silicas as carriers for controlled aspirin delivery

The bimodal mesoporous silica modified with 3-aminopropyltriethoxysilane was performed as the aspirin carrier. The samples’ structure, drug loading and release profiles were characterized with X-ray diffraction, scanning electron microscopy, N₂ adsorption and desorption, Fourier transform infrared spectroscopy, TG analysis, elemental analysis and UV-spectrophotometer. For further exploring the effects of the bimodal mesopores on the drug delivery behavior, the unimodal mesoporous material MCM-41 was also modified as the aspirin carrier. Meantime, Korsmeyer-Peppas equation f_t=ktⁿ was employed to analyze the dissolution data in details. It is indicated that the bimodal mesopores are beneficial for unrestricted drug molecules diffusing and therefore lead to a higher loading and faster releasing than that of MCM-41. The results show that the aspirin delivery properties are influenced considerably by the mesoporous matrix, whereas the large pore of bimodal mesoporous silica is the key point for the improved controlled-release properties.     

新型无机-有机杂化中孔发光材料(phen)_2Eu/MCM-41的合成与表征

合成出了担载稀土有机配合物的无机 -有机杂化中孔发光材料 ( phen) 2 Eu/MCM-4 1 ,用 X射线衍射、红外光谱、荧光光谱和紫外 -可见漫反射光谱对所得样品进行了表征 ,并与相应的纯稀土配合物进行了比较 .结果表明 ,所得杂化材料具有典型的中孔材料 MCM-4 1的结构 ,且经组装后孔结构保持不变 ,在紫外光照射下 ,发出稀土离子的特征谱线 ,但与纯稀土配合物相比 ,其激发光谱发生蓝移 ,稀土 Eu3 所处的格位对称性降低 ,荧光寿命延长 .另外 ,对光谱性质进行了讨论 .     

One pot synthesis of ordered mesoporous organosilica particles bearing propyl-, octyl- and hexadecyl-chains

New hybrid organic–inorganic materials exhibiting ordered mesoporous structures have been synthesized by co-condensation of tetraethoxysilane and various alkyltrimethoxysilanes with increasing length of the hydrocarbon chain (propyl, octyl, hexadecyl), in water–ethanol solution containing ammonia, in the presence of a cationic surfactant (cetyltrimethylammonium bromide) as templating agent. The obtained hybrid materials were characterized by using several physico-chemical techniques, such as X-ray diffraction, N₂ adsorption, ²⁹Si MAS NMR, SEM and elemental analysis. It was shown that the direct synthesis procedure allows obtaining ordered hybrid mesoporous silica with various contents of organic functions, from 5 to 20 %. Moreover, increasing the chain length of the organic group, from propyl to octyl and hexadecyl leads to a change of the pore structure from hexagonal p6mm MCM-41 type architecture to cubic Ia3d MCM-48 type mesostructure.     

Base-functionalized MCM-41 as catalysts for the synthesis of monoglycerides

The mesoporous molecular sieves of the M41S family have little intrinsic catalytic activity. However, it is possible to functionalize the material by grafting organic side chains on the walls. These organic–inorganic hybrid materials maintain the advantages of the inorganic support, notably a high surface area and structural stability at elevated temperature and pressure. Catalysts based on MCM-41 functionalized with either hindered amine bases or free primary amino groups have been evaluated for the facile synthesis of monoglycerides from fatty acids and glycidol. Yields as high as 95% in 8 h have been achieved. The catalysts can be reused several times with little loss of activity.     

Morphology of nanostructured platinum in mesoporous materials-effect of solvent and intrachannel surface

An intrachannel surface of host silica was functionalized through the reaction of surface silanol groups with silanes to generate a monolayer of positively charged groups, and together with the strongly adsorbed and negatively charged PtCl6(2-), resulting in nanostructured platinum-mesoporous silica composites. The highly dispersed Pt nanoparticles and nanonetworks are fabricated from (CH3O)3Si(CH2)3N(CH3)3+Cl- functionalized mesoporous silica MCM-48 with H2PtCl6 in ethanol and water solvent, and characterized by PXRD, XAS, TEM, and N2 adsorption. The solvent of H2PtCl6 solution is found to affect the mobility of Pt precursors and the resulting morphology of nanostructured metallic Pt. The effect of the intrachannel surface properties on the incorporation and the morphology of nanostructured Pt on the deposition of Pt(NH3)4Cl2 and H2PtCl6 on Al-doped or C-coated mesoporous silica MCM-41 is also studied relative to that on pure silica MCM-41.     

Silver Chloride Loaded Mesoporous Silica Particles and Their Application in the Antibacterial Coatings on Denture Base

Thiol-functionalized MCM-41 type mesoporous silica particles（MSPs） were prepared and loaded with silver chloride to act as antibacterial agents. The antibacterial activity of the silver chloride loaded MSPs（AgCI-MSPs） was evaluated by the minimum bactericidal concentration（MBC） against Candida albieans（ATCC 10231）. The AgC1-MSPs with the highest antibacterial activity were then dispersed in hybrid coatings with different mass ratios to fabricate antibacterial coatings. The antibacterial activity of the coatings was tested against Candida albicans{ATCC 10231） and Streptococcus mutans（ATCC 25175）. The resulting antibacterial coatings exhibited high antibacterial activity, good adhesion to the substrate and high hardness.     

Anchoring of 1,8-naphthalimide derivative into mesoporous MCM-41 molecular sieves

The fluorescent dye molecules, 4-piperidine-1,8-naphthalimide, were successfully fixed into the amino modified pore channel of mesoporous MCM-41 type materials by in situ reaction of 4-piperidinyl-1,8-naphthalic anhydride with the amino group. The formation of amide bonds on the pore surface was verified by infrared spectra. The maximum fluorescence emission peak of this hybrid material has a red shift of 13 nm compared to that of a naphthalimide derivative in ethanol solution. Moreover, the fluorescence intensity of dye molecules grafted into Ce-doped MCM-41 is higher than that in pure silica MCM-41. This phenomenon is attributed to the inhibited internal electron transfer from piperidine to naphthalimide groups by Ce⁴⁺, thus improving the fluorescence intensity of the naphthalimide group. The unique fluorescence behavior of the 1,8-naphthalimide derivative doped hybrid mesoporous material makes it a good candidate for the metal ions microdetection.     

Immobilization of Keggin and Preyssler tungsten heteropolyacids on various functionalized silica

The Keggin and Preyssler tungsten heteropolyacids, H3PW12O40 and H15P5W30O110, have been immobilized on the inner surface of mesoporous MCM-41, fume silica and silica-gel by means of chemical bonding to aminosilane groups. The materials were characterized by FT-IR spectroscopy, low-angle XRD and BET surface area analysis. The tendencies of heteropolyacids adsorption in solution on functionalized silicas have been investigated by UV-vis. Among the functionalized silica materials, MCM-41 showed the largest amine to silica and the least heteropolyacid to silica ratios. The BET surface area revealed that in all three cases the surface area decreased after grafting amine group and anchoring of the HPAs clusters. Low-angle XRD analysis showed that by introducing HPA into functionalized MCM-41 the intensity of the main reflection decreased significantly.     

Synthesis and characterization of Co (II) and Fe (III) Schiff base complexes grafted onto mesoporous MCM-41: A heterogeneous and recyclable nanocatalysts for the selective oxidation of sulfides and oxidative coupling of thiols

Novel organic–inorganic hybrid heterogeneous catalysts containing cobalt(II) and iron(III) Schiff base complexes, grafted on the internal surface of MCM-41 pores were prepared by introducing a metal salt into a mesoporous silica functionalized with a Schiff base ligand. The chemical and physical properties of the catalysts were investigated by BET, TGA, XRD, FT-IR, and TEM techniques. These complexes were found to be efficient, selective catalysts for the oxidation of various sulfides to sulfoxides and oxidative coupling of thiols to their corresponding disulfides with urea hydrogen peroxide in excellent yield at room temperature. The designed catalytic system prevents effectively the overoxidation of sulfides and thiols to sulfoxides and sulfones, respectively. Also the heterogeneous catalysts can be recovered easily and reused many times without significant loss of activity and selectivity.     

Amine decorated 2d hexagonal and 3d cubic mesoporous silica nanoparticles: A comprehensive dissolution kinetic study in simulated and biorelevant media

Highly ordered Bexarotene (BXR) encapsulated mesoporous silica nanoparticles in particular bare and amine functionalized MCM-41 and MCM-48 were designed employing a novel impregnation solvent evaporation strategy. The outcomes unveiled successful synthesis of mesoporous assembly having 2?D hexagonal and 3?D cubic framework for MCM-41 and MCM-48 respectively withholding large surface area, optimum pore size, pore volume along with uniform particle size distribution. Additionally, SXRD and TEM findings divulged retention of characteristic mesoporous features regardless of surface modification and drug incorporation. Eventually the release profile and release kinetics results in different dissolution media demonstrated complete drug release in simulated intestinal fluid (SIF) within 75?min and 45?min from BXR-41 and BXR-48 along with 3.33 and 5 fold increment in dissolution profile. Furthermore, lack of any interaction between gelatin of hard capsule shell and amine group in presence of enzyme were justified from the indistinguishable release pattern in enzyme free and enzyme enriched SIF media. The divergent release pattern in fed and fasted state condition having a higher release in former media strongly directs towards taking medicine after meal. Finally the release kinetics study exhibited Weibull and Higuchi model as a best fit models for bare and amine coated BXR nanoparticles respectively.     

Tailored doxycycline delivery from MCM-41-type silica carriers

Doxycycline, an antibiotic from the tetracycline class with a broad spectrum of activity, was used to prepare drug delivery systems based on pristine and functionalized mesostructured silica supports. MCM-41-type materials with different textural, structural, and surface properties were used to assess their influence on the drug release kinetics. Small- and wide-angle XRD, FTIR spectroscopy and N₂ adsorption/desorption isotherms were used to characterize the carriers before and after doxycycline loading. The drug release experiments were performed in vitro in 0.2 M phosphate buffer solution at 37 °C, and the slowest drug release kinetics was obtained for magnesium-modified MCM-41 carrier. All drug-loaded materials exhibited good antibacterial activity against Klebsiella pneumoniae ATCC 10031 strain, similar to the drug alone.     

Structure and microstructure of nanoscale mesoporous silica spheres

The addition of alcohol to the synthesis of a mesoporous silica material will induce a transition from hexagonal (MCM-41) to cubic (MCM-48) to a lamellar phase and finally to silica spherical particles (SSP), as the alcohol adopts the role of cosurfactant. This will evolve to a cosolvent function as the alcohol concentration is further increased. X-ray diffraction suggests that a phase regression phenomenon occurs, in contradiction with the g-value. Transmission electron microscopy reveals the structure and the microstructure of the mesoporous silica spherical particles. It is shown that the SSP consists of a core of a truncated octahedron with the MCM-48 cubic structure and radial cylindrical pores grown on the surface of the truncated octahedron. This structure model and a possible formation mechanism are discussed.     

Effect of amine functionalization of spherical MCM-41 and SBA-15 on controlled drug release

MCM-41 and SBA-15 silica materials with spherical morphology and different particle sizes were synthesized and modified by post-synthesis method with 3-aminopropyltriethoxysilane (APTES). A comparative study of the adsorption and release of a model drug, ibuprofen, were carried out. The modified and drug loaded mesoporous materials were characterized by XRD, TEM, N₂ physisorption, thermal analysis, elemental analysis and FT-IR spectroscopy. Surface modification with amino groups resulted in high degree of ibuprofen loading and slow rate of release for MCM-41, whereas it was the opposite for SBA-15. The adsorbed drug content and the delivery rate can be predetermined by the choice of mesoporous material with the appropriate structural characteristics and surface functionality.     

萘普生在介孔分子筛MCM-41中的负载及其溶出性能

用含氨基的偶联剂修饰介孔分子筛MCM-41的表面,将修饰前和修饰后的介孔分子筛分别负载难溶性药物萘普生（NAP）,利用X射线衍射、傅里叶变换红外光谱、差示扫描量热分析、扫描电子显微镜、透射电子显微镜和N2吸附 脱附分析等技术分别对其进行了结构表征和性能测试。 结果表明,药物分子存在于分子筛的孔道中。 负载在MCM-41中的萘普生溶出速率远优于原料药,60 min时大约溶出70%。 氨基修饰后的药物释放速率比修饰前有所减慢,表明可通过氨基修饰调节释放速率。