过渡区微尺度流动的有效黏性多松弛系数格子Boltzmann模拟

为提高采用二维九速离散速度模型的格子Boltzmann方法 (LBM)模拟微尺度流动中非线性现象的精度和效率,引入Dongari等提出的有效平均分子自由程对黏性进行修正(Dongari N,Zhang Y H,Reese J M2011 J.Fluids Eng.133 071101);并针对以往研究微尺度流动时采用边界处理格式含有离散误差的问题,采用多松弛系数格子Boltzmann方法结合二阶滑移边界条件,对微尺度Couette流动和周期性Poiseuille流动进行模拟,并将速度分布以及质量流量等模拟结果与直接模拟蒙特卡罗方法模拟数据、线性Boltzmann方程的数值解以及现有的LBM模型模拟结果进行对比.结果表明,相对于现有的LBM模型,引入新的修正函数所建立的有效黏性多松弛系数LBM模型有效提高了LBM模拟过渡区的微尺度流动中的非线性现象的能力.     

Development of a new correlation to calculate permeability for flows with high Knudsen number

Flows with high Knudsen number play a prominent role in many engineering applications. The present study is an effort toward the simulation of flow with high Knudsen number using modified lattice Boltzmann method(LBM) through a porous medium in a channel. The effect of collision between molecules and solid walls, which is required to accurately simulate transition flow regime, is taken into account using a modified relaxation time. Slip velocity on the wall, which is another significant difficulty in simulating transition flow regime, is captured using the slip reflection boundary condition(SRBC). The geometry of porous medium is considered as in-line and staggered. The results are in good agreement with previous works. A new correlation is obtained between permeability, Knudsen number and porosity for flows in transition flow regimes.     

纳米SiO2材料声子热输运的格子玻尔兹曼法模拟

根据德拜物理模型,采用格子玻尔兹曼方法（LBM）对纳米二氧化硅薄膜内的声子热输运特性进行了模拟分析,得到了薄膜内的温度响应特性;在此基础上,分析了其法向有效导热系数。计算结果表明,当努森数大于0．01时,薄膜边界处出现温度跳跃,呈现出明显的微纳米尺度传热特性;当薄膜厚度小于20nm时,减小厚度可使其有效导热系数迅速降低...     

微尺度振荡Couette流的格子Boltzmann模拟

采用有效多松弛时间-格子Boltzmann方法(Effective MRT-LBM)数值模拟了微尺度条件下的振荡Couette和Poiseuille流动. 在微流动LBM中引入Knudsen边界层模型,对松弛时间进行修正. 模拟时平板或外力以正弦周期振动,Couette流中考虑了单平板振动、上下板同相振动这两类情况. 研究结果表明,修正后的MRT-LBM模型能有效用于这类非平衡的微尺度流动模拟;对于Couette流,随着Kn数的增大,壁面滑移效应变得越明显. St越大,板间速度剖面的非线性特性越剧烈;两板同相振荡时,若Kn,St均较小,板间流体受到平板拖动剪切的影响很小,板间速度几乎重叠在一起;在振荡Poiseuille流动中,St数增大到一定值时,相位滞后现象减弱;相对于Kn数,St数对振荡Couette 和Poiseuille流中不同位置处速度相位差的产生有较大影响. 关键词： 格子Boltzmann方法 有效MRT模型 Knudsen层 振荡流     

On the application of the lattice Boltzmann method to the investigation of glottal flow

The production of voice is directly related to the vibration of the vocal folds, which is generated by the interaction between the glottal flow and the tissue of the vocal folds. In the current study, the aerodynamics of the symmetric glottis is investigated numerically for a number of static configurations. The numerical investigation is based on the lattice Boltzmann method (LBM), which is an alternative approach within computational fluid dynamics. Compared to the traditional Navier-Stokes computational fluid dynamics methods, the LBM is relatively easy to implement and can deal with complex geometries without requiring a dedicated grid generator. The multiple relaxation time model was used to improve the numerical stability. The results obtained with LBM were compared to the results provided by a traditional Navier-Stokes solver and experimental data. It was shown that LBM results are satisfactory for all the investigated cases.     

A solution-adaptive lattice Boltzmann method for two-dimensional incompressible viscous flows

A stencil adaptive lattice Boltzmann method (LBM) is developed in this paper. It incorporates the stencil adaptive algorithm developed by Ding and Shu [26] for the solution of Navier–Stokes (N–S) equations into the LBM calculation. Based on the uniform mesh, the stencil adaptive algorithm refines the mesh by two types of 5-points symmetric stencils, which are used in an alternating sequence for increased refinement levels. The two types of symmetric stencils can be easily combined to form a 9-points symmetric structure. Using the one-dimensional second-order interpolation recently developed by Wu and Shu [27] along the straight line and the D2Q9 model, the adaptive LBM calculation can be effectively carried out. Note that the interpolation coefficients are only related to the lattice velocity and stencil size. Hence, the simplicity of LBM is not broken down and the accuracy is maintained. Due to the use of adaptive technique, much less mesh points are required in the simulation as compared to the standard LBM. As a consequence, the computational efficiency is greatly enhanced. The numerical simulation of two dimensional lid-driven cavity flows is carried out. Accurate results and improved efficiency are reached. In addition, the steady and unsteady flows over a circular cylinder are simulated to demonstrate the capability of proposed method for handling problems with curved boundaries. The obtained results compare well with data in the literature.     

Boundary scheme for lattice Boltzmann modeling of micro-scale gas flow in organic-rich pores considering surface diffusion

We propose a boundary scheme for addressing multi-mechanism flow in a porous medium in slip and early transition flow regimes, which is frequently encountered in shale gas reservoirs. Micro-gaseous flow in organic-rich shale involves a complex flow mechanism. A self-developed boundary scheme that combines the non-equilibrium extrapolation scheme and the combined diffusive reflection and bounce-back scheme(half-way DBB) to embed the Langmuir slip boundary into the single-relaxation-time lattice Boltzmann method(SRT-LBM) enables us to describe this process, namely, the coupling effect of micro-gaseous flow and surface diffusion in organic-rich nanoscale pores. The present LBM model comes with the careful consideration of the local Knudsen number, local pressure gradient, viscosity correction model, and regularization procedure to account for the rarefied gas flows in irregular pores. Its validity and accuracy are verified by several benchmarking cases, and the calculated results by this boundary scheme accord well with our analytical solutions.This boundary scheme shows a higher accuracy than the existing studies. Additionally, a subiteration strategy is presented to tackle the coupled micro-gaseous flow and surface diffusion, which necessitates the iteration process matching of these two mechanisms. The multi-mechanism flow in the self-developed irregular pores is also numerically investigated and analyzed over a wide range of parameters. The results indicate that the present model can effectively capture the coupling effect of micro-gaseous flow and surface diffusion in a tree-like porous medium.     

微圆管进口区气体流动与换热特性研究

对微圆管进口区运用一阶速度滑移和温度跳跃边界,考察了Kn、动量调和及热调和系数对流动与换热特性的影响机理和规律.模拟结果表明:流动进口段长度随Kn增加而增加,但随动量调和系数减小而减小;热进口段长度随Kn增加而增加,但随动量调和系数及热调和系数减小而减小;Nu数随Kn增加及热调和系数减小而减小,但随动量调和系数减小而增加.     

Analytic Solution for Diffusional Filtration across Granular Beds in Low Knudsen Number Regime

The collection efficiency of aerosols in the low Knudsen number region was studied using a system of multiple spheres. Kuwabara's free vorticity model was expanded to include the effects of gas slip at the collector surface, with the collection efficiency due to diffusion obtained analytically and compared with existing experimental results. The results showed that the diffusional collection efficiency increases as the Knudsen number increases due to gas slippage at the collector surface. The obtained analytical solution converged to the existing collection efficiency of a solid sphere system with a Knudsen number of zero, and that of a bubble with an infinite Knudsen number. The comparison of the experimental results with analytic solution in this study shows that the trends agree well. Therefore, this study is a subsequent expansion of the collection efficiency in the finite Knudsen number region, and can be used for a broad range of collector sizes, pressures and temperatures.     

格子玻尔兹曼方法对不同张角聚焦声束的建模

高强度聚焦超声(HIFU)是一种新型的无创治疗肿瘤新技术,其中换能器声场数值计算能够为HIFU治疗提供重要的依据。传统非线性KZK和SBE模型广泛应用于换能器声场数值计算,但依然存在某些不足。我们采用一种介观尺度的新型流体力学方法,即格子Boltzmann方法(LBM),基于2维9离散速度(D2Q9)格子构建了轴对称多弛豫参数LBM模型,并通过调节弛豫参数分析其对模型的影响;利用该模型对两个具有不同张角的球面聚焦换能器的声场进行数值模拟,并与KZK和SBE模型的计算结果进行比较。结果表明LBM模型能够很好地描述超声波的激发和传播机制,从流体力学的角度描述聚焦声场的分布,具有清晰的物理意义,且计算过程不受换能器张角的限制,在换能器声场的理论分析和模拟计算及其在HIFU治疗中的应用有着积极的意义。      

二维平板通道中流动与传热的格子-Boltzmann模拟

格子-Boltzmann数值模拟方法(LBM),在最近十几年来得到迅速发展。本文发展了LBM的流动与传热模型,并对二维平板通道中的流动与传热进行了模拟,采用密度分布函数得到速度场,用单独的内能分布函数得到温度场,并与传统FVM方法所得到的多个特征量结果进行了比较,模拟结果与FVM解均吻合很好。鉴于LBM边界条件处理简单和易于实施等特点,该方法可望成为求解流动与传热的一种有效数值模拟手段。     

Sensitivity analysis and determination of free relaxation parameters for the weakly-compressible MRT–LBM schemes

Lattice Boltzmann methods (LBMs) are very efficient for computational fluid dynamics, and for capturing the dynamics of weak acoustic fluctuations. It is known that multi-relaxation-time lattice Boltzmann method (MRT–LBM) appears as a very robust scheme with high precision. There exist several free relaxation parameters in the MRT–LBM. Although these parameters have been tuned via linear analysis, the sensitivity analysis of these parameters and other related parameters is still not sufficient for describing the behavior of the dispersion and dissipation relations of the MRT–LBM. Previous researches have shown that the bulk dissipation in the MRT–LBM induces a significant over-damping of acoustic disturbances. This indicates that the classical MRT–LBM is not best suited to recover the correct behavior of pressure fluctuations. In wave-number space, the first/second-order sensitivity analyses of matrix eigenvalues are used to address the sensitivity of the wavenumber magnitudes to the dispersion-dissipation relations. By the first-order sensitivity analysis, the numerical behaviors of the group velocity of the MRT–LBM are first obtained. Afterwards, the distribution sensitivities of the matrix eigenvalues corresponding to the linearized form of the MRT–LBM are investigated in the complex plane. Based on the sensitivity analysis and an effective algorithm of recovering linearized Navier–Stokes equations (L-NSEs) from linearized MRT–LBM (L-MRT–LBM), we propose some simplified optimization strategies to determine the free relaxation parameters of the MRT–LBM. Meanwhile, the dispersion and dissipation relations of the optimal MRT–LBM are quantitatively compared with the exact dispersion and dissipation relations. At last, some numerical validations on classical acoustic benchmark problems are shown to assess the new optimal MRT–LBM.     

Analysis of transport of collimated radiation in a participating media using the lattice Boltzmann method

Application of the lattice Boltzmann method (LBM) recently proposed by Asinari et al. [Asinari P, Mishra SC, Borchiellini R. A lattice Boltzmann formulation to the analysis of radiative heat transfer problems in a participating medium. Numer Heat Transfer B 2010; 57:126–146] is extended to the analysis of transport of collimated radiation in a planar participating medium. To deal with azimuthally symmetric radiation in planar medium, a new lattice structure for the LBM is used. The transport of the collimated component in the medium is analysed by two different, viz., flux splitting and direct approaches. For different angles of incidence of the collimated radiation, the LBM formulation is tested for the effects of the extinction coefficient, the anisotropy factor, and the boundary emissivities on heat flux and emissive power distributions. Results are compared with the benchmark results obtained using the finite volume method. Both the approaches in LBM provide accurate results.     

Discrete Boltzmann Method with Maxwell-Type Boundary Condition for Slip Flow

The rarefied effect of gas flow in microchannel is significant and cannot be well described by traditional hydrodynamic models. It has been known that discrete Boltzmann model(DBM) has the potential to investigate flows in a relatively wider range of Knudsen number because of its intrinsic kinetic nature inherited from Boltzmann equation.It is crucial to have a proper kinetic boundary condition for DBM to capture the velocity slip and the flow characteristics in the Knudsen layer. In this paper, we present a DBM combined with Maxwell-type boundary condition model for slip flow. The tangential momentum accommodation coefficient is introduced to implement a gas-surface interaction model.Both the velocity slip and the Knudsen layer under various Knudsen numbers and accommodation coefficients can be well described. Two kinds of slip flows, including Couette flow and Poiseuille flow, are simulated to verify the model.To dynamically compare results from different models, the relation between the definition of Knudsen number in hard sphere model and that in BGK model is clarified.     

基于区域分裂的非均匀Lattice Boltzmann方法

基于区域分裂技术,设计了一种使用非均匀网格的LatticeBoltzmann（LB）模型,其基本思想是：将流场分解为若干个规划的子区域,在每个子区域使用均匀网格上的LB模型求解,子区域的边界条件利用插值方法决定,用该模型对二维圆柱绕流问题进行了模拟,并与其它方法的结果作了比较。     

Gas Flow in Microchannels – A Lattice Boltzmann Method Approach

Gas flow in microchannels can often encounter tangential slip motion at the solid surface even under creeping flow conditions. To simulate low speed gas flows with Knudsen numbers extending into the transition regime, alternative methods to both the Navier–Stokes and direct simulation Monte Carlo approaches are needed that balance computational efficiency and simulation accuracy. The lattice Boltzmann method offers an approach that is particularly suitable for mesoscopic simulation where details of the molecular motion are not required. In this paper, the lattice Boltzmann method has been applied to gas flows with finite Knudsen number and the tangential momentum accommodation coefficient has been implemented to describe the gas-surface interactions. For fully-developed channel flows, the results of the present method are in excellent agreement with the analytical slip-flow solution of the Navier–Stokes equations, which are valid for Knudsen numbers less than 0.1. The present paper demonstrates that the lattice Boltzmann approach is a promising alternative simulation tool for the design of microfluidic devices.     

On Implementation of Boundary Conditions in the Application of Finite Volume Lattice Boltzmann Method

A new implementation of boundary condition based on the half-covolume and bounce-back rule for the non-equilibrium distribution function for the finite volume LBM is proposed here. The numerical simulation results for the expansion channel flow and driven cavity problem indicate that this method is workable for arbitrary meshes. In addition, the fourth order Runge–Kutta scheme is found to be a practical way in the LBM to accelerate the calculation speed.     

Acoustic properties of rarefied gases inside pores of simple geometries

Analytical solutions describing propagation of monochromatic acoustic waves inside long pores of simple geometries and narrow flat slits are obtained with accounting for gas rarefaction effects. It is assumed that molecular nature of gas is important in Knudsen layers near solid boundaries. Outside the Knudsen layers, the continuum approach is used. This model allows for extension of acoustic analysis to regions of low pressures and microscopic cross-sectional sizes of channels. The problem is solved using linearized Navier-Stokes equations with the boundary conditions that resulted from the first-order approximation with respect to small Knudsen number Kn. For slits and pores of circular and square cross sections, the theoretical dependencies of the dynamic density in the low-frequency range are compared with those that resulted from known experimental data on steady-state flows of rarefied gases in uniform channels. Despite the formal restriction Kn < 1 of asymptotic analysis, the theoretical model agrees well with experiments up to Kn approximately 5. It is shown that the molecular phenomena affect acoustic characteristics of micro-channels and pores starting from relatively small Knudsen numbers Kn > 0.01, especially at low frequencies. The obtained results may be used for analyses of acoustic properties of waveguides, perforated panels, micro-channels and pores in wide range of gas pressures as well as for stationary flows of rarefied gases through long uniform pipes etc.     

耦合不可压流场输运方程的格子Boltzmann方法研究

基于格子Boltzmann方法,提出了求解耦合不可压缩流场输运方程的一种改进数值方法. 该方法使用格子Boltzmann方法求解流场方程,并根据流场格子模型的密度分布函数构建了输运方程的二阶离散格式. 通过二维平板通道流场输运系统验证了该方法的有效性.数值结果表明,该方法可以有效地减少计算过程中出现的非物理耗散, 并克服了传统模型所需巨大存储量的缺点.     

十三点格子Boltzmann模型仿真

格子气和格子Boltzmann方法的迅速发展提供了一类求解流体力学问题的新方法。格子Boltzmann方法在保留了格子气模型优点的同时,克服了它的不足之处。本文讨论了一种三迭加HPP十三点模型,通过选择适当的平衡分布及参数,并用Chapman－Enskog展开和多尺度技术导出了Navier－Stokes方程。在微机上模拟了空腔流的流动问题,并与传统方法的计算结果进行了比较,结果表明该模型能较好的模拟复杂流动现象,并具有较好的工程应用背景。