Understanding the synergistic effects,optical and electronic properties of ternary Fe/C/S‐doped TiO2 anatase within the DFT + U approach

Although TiO₂ is an efficient photocatalyst, its large band gap limits its photocatalytic activity only to the ultraviolet region. An experimentally synthesized ternary Fe/C/S‐doped TiO₂ anatase showed improved visible light photocatalytic activity. However, a theoretical study of the underlying mechanism of the enhanced photocatalytic activity and the interaction of ternary Fe/C/S‐doped TiO₂ has not yet been investigated. In this study, the defect formation energy, electronic structure and optical property of TiO₂ doped with Fe, C, and S are investigated in detail using the density functional theory + U method. The calculated band gap (3.21 eV) of TiO₂ anatase agree well with the experimental band gap (3.20 eV). The defect formation energy shows that the co‐ and ternary‐doped systems are thermodynamically favorable under oxygen‐rich condition. Compared to the undoped TiO₂, the absorption edge of the mono‐, co‐, and ternary‐doped TiO₂ is significantly enhanced in the visible light region. We have shown that ternary doping with C, S, and Fe induces a clean band structure without any impurity states. Moreover, the ternary Fe/C/S‐doped TiO₂ exhibit an enhanced photocatalytic activity, a smaller band gap and negative formation energy compared to the mono‐ and co‐doped systems. Moreover, the band edges of Fe/C/S‐doped TiO₂ align well with the redox potentials of water, which shows that the ternary Fe/C/S‐doped TiO₂ is promising photocatalysts to split water into hydrogen and oxygen. These findings rationalize the available experimental results and can assist the design of TiO₂‐based photocatalyst materials.     

Investigation of the silicon concentration effect on Si-doped anatase TiO2 by first-principles calculation

A first-principles calculation based on the density functional theory (DFT) was used to investigate the energetic and electronic properties of Si-doped anatase TiO₂ with various silicon concentrations. The theoretical calculations showed that with Si-doping the valence band and conduction band of TiO₂ became hybrid ones with large dispersion, which could benefit the mobility of the photo-generated carriers. This result is in agreement with the experimental reports. At lower doping levels, the band gap of Si-doped anatase TiO₂ decreases about 0.2 eV. With the increase of silicon concentration, the band gap increases gradually and larger formation energies are required during the synthesis of Si-doped TiO₂.     

Fabrication and photoelectrochemical properties of porous ZnWO4 film

Porous ZnWO₄ films have been fabricated on Indium-tin oxide (ITO) glass and its photoelectrochemical properties and high photocatalytic activities towards degradation of rhodamine B (RhB) has been investigated. Using amorphous heteronuclear complex as precursor and with the addition of polyethylene glycol (PEG, molecular weight=400), the porous ZnWO₄ films have been achieved at the temperature of 500 °C via dip-coating method. It is composed of approximately 70 nm-sized particles and exhibits substantial porosity. The textures and porosity of ZnWO₄ films are dependent on preparation factors, such as the ratio of precursor/PEG and the annealing conditions. The formation mechanism of porous ZnWO₄ films was proposed. The porous ZnWO₄ films exhibited high photocatalytic activities towards degrading RhB. The top of valence band and the bottom of the conduction band was estimated to be −0.56 and 3.45 eV (vs. saturated calomel electrode (SCE)), respectively.     

Photocatalytic Degradation of Glyphosate in Water by N‐Doped SnO2/TiO2 Thin‐Film‐Coated Glass Fibers

Photocatalytic degradation of glyphosate contaminated in water was investigated. The N‐doped SnO₂/TiO₂ films were prepared via sol–gel method, and coated on glass fibers by dipping method. The effects of nitrogen doping on coating morphology, physical properties and glyphosate degradation rates were experimentally determined. Main variable was the concentration of nitrogen doping in range 0–40 mol%. Nitrogen doping results in shifting the absorption wavelengths and narrowing the band gap energy those lead to enhancement of photocatalytic performance. The near optimal 20N/SnO₂/TiO₂ composite thin film exhibited about two‐ and four‐folds of glyphosate degradation rates compared to the undoped SnO₂/TiO₂ and TiO₂ films when photocatalytic treatment were performed under UV and solar irradiations, respectively, due to its narrowest band gap energy (optical absorption wavelength shifting to visible light region) and smallest crystallite size influenced by N‐doping.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.     

Effective band gap reduction of titanium oxide semiconductors by codoping from first‐principles calculations

Doping is an efficient approach to narrow the band gap of TiO₂ and enhance its photocatalytic activity. Here, we perform generalized gradient approximation (GGA)+U calculations to narrow the band gap of TiO₂ by codoping of X (F, N) with transition metals (TM = Fe, Co) to extend the absorption edge to longer visible‐light wavelengths. Our results show that all the codoped systems can narrow the band gap significantly, in particular, (F+Fe)‐codoped system could serve as remarkably better photocatalysts with both narrowing of the band gap and relatively smaller formation energies than those of (F+Co) and (N+TM)‐codoped systems. Our results provide useful guidance for codoped TiO₂ efficient for photocatalytic activity. © 2013 Wiley Periodicals, Inc.     

Influence of High-energy electron-beam on photocatalytic activity of TiO2 films on carbon-fiber deposited by atomic layer deposition

High-energy electron-beam with energy of 1 MeV was used for modifying surface structure of TiO₂ thin films on carbon fiber prepared by using atomic layer deposition under atmospheric pressure. TiO₂ nanoparticles (∼20 nm) on carbon fiber underwent structural modification of the surface upon electron-beam treatment, resulting in enhanced photocatalytic activity. In contrast, a thicker film of TiO₂ did not show such changes in surface structure and photocatalytic activity by electron-beam treatment. We demonstrate that electron-beam can be used for modifying surface structure of photocatalysts consisting of nanoparticles for improvement of their activity.     

Preparation of a new pyrochlore-type compound Na0.32Bi1.68Ti2O6.46(OH)0.44 by hydrothermal reaction

A new pyrochlore-type Na_0.32Bi_1.68Ti₂O_6.46(OH)_0.44 with the cubic cell of a=10.339(5) Å was prepared by hydrothermal reaction using TiO₂ (anatase) and Bi₂O₃ in NaOH solution. This compound was obtained when the molar ratio of NaOH/TiO₂ was above 2 and the reaction temperature was above 240 °C. The TG-curve of as-prepared sample showed a mass loss of 0.8 mass% which was caused by release of OH group. This compound decomposed to a pyrochlore-type compound and a layered-type Na_0.5Bi_4.5Ti₄O₁₅ above 800 °C. The optical band gap of Na_0.32Bi_1.68Ti₂O_6.46(OH)_0.44 was estimated to be 2.5 eV.     

Fe-doped and Mn-doped titanium dioxide thin films

Thin films of TiO₂ doped with Fe and Mn were deposited on F-doped SnO₂-coated glass by spin coating. Dopant concentrations of 3–7 wt% (metal basis) were used. The structural, chemical, and optical characteristics of the films were investigated. Laser Raman microspectroscopy and glancing angle X-ray diffraction data showed that the films consisted of the anatase polymorph of TiO₂. X-ray photoelectron spectroscopy data indicated the presence of Fe³⁺, Mn⁴⁺, and Mn³⁺ in the doped films, as predicted by calculated thermodynamic stability diagrams, and the occurrence of atomic disorder and associated structural distortion. Ultraviolet–visible spectrophotometry data showed that the optical indirect band gap of the films decreased significantly with increasing dopant levels, from 3.36 eV (undoped) to 2.95 eV (7 wt% Fe) and 2.90 eV (7 wt% Mn). These improvements are attributed to single (Fe) or multiple (Mn) shallow electron/hole trapping sites associated with the dopant ions.     

Preparation and characterization of silver and indium vanadate co-doped TiO2 thin films as visible-light-activated photocatalyst

Novel visible-light-activated photocatalytic Ag/InVO₄-TiO₂ thin films were developed in this paper through a sol-gel method from the TiO₂ sol containing Ag and InVO₄. The photocatalytic activities of Ag/InVO₄-TiO₂ thin films were investigated based on the oxidation decomposition of methyl orange in aqueous solution. The Ag/InVO₄-TiO₂ thin films were characterized by X-Ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectroscopy (UV-vis). The results revealed that the Ag/InVO₄-TiO₂ thin films extended the light absorption spectrum toward the visible region; the Ag and InVO₄ co-doped thin films significantly enhanced the methyl orange photodegradation under visible light irradiation. It has been confirmed that the Ag/InVO₄-TiO₂ thin films could be excited by visible light (E < 3.2 eV). The significant enhancement in the Ag/InVO₄-TiO₂ photo activity under visible light irradiation can be ascribed to the simultaneous effects of doped noble metal Ag by acting as electron traps and InVO₄ as narrow band gap sensitizer.     

Preparation and characterization of Zr doped TiO2 nanotube arrays on the titanium sheet and their enhanced photocatalytic activity

This paper described a new method for the preparation of Zr doped TiO₂ nanotube arrays by electrochemical method. TiO₂ nanotube arrays were prepared by anodization with titanium anode and platinum cathode. Afterwards, the formed TiO₂ nanotube arrays and Pt were used as cathode and anode, respectively, for preparation of Zr/TiO₂ nanotube arrays in the electrolyte of 0.1 M Zr(NO₃)₄ with different voltage and post-calcination process. The nanotube arrays were characterized by field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and UV-Vis diffusion reflection spectra (DRS). The photocatalytic activities of these nanotubes were investigated with Rhodamine B as the model pollutant and the results demonstrated that the photocatalytic efficiency of Zr doped TiO₂ nanotubes was much better than that of TiO₂ nanotubes under UV irradiation. Zr/TiO₂ nanotube arrays doped at 7 V and calcined at 600 °C (denoted as TiO₂-7 V-600) achieved the best photocatalytic efficiency and the most optimal doping ratio was 0.047 (Zr/Ti). TiO₂-7 V-600 could be reused for more than 20 times and maintained good photocatalytic activities.     

Preparation of photocatalytic nano-ZnO/TiO2 film and application for determination of chemical oxygen demand

A composite nano-ZnO/TiO₂ film as photocatalyst was fabricated with vacuum vaporized and sol-gel methods. The nano-ZnO/TiO₂ film improved the separate efficiency of the charge and extended the range of spectrum, which showed a higher efficiency of photocatalytic than the pure nano-TiO₂ and nano-ZnO film. The photocatalytic mechanism of nano-ZnO/TiO₂ film was discussed, too. A new method for determination of low chemical oxidation demand (COD) value in ground water based on nano-ZnO/TiO₂ film using the photocatalytic oxidation technology was founded. This method was originated from the direct determination of the Mn(VII) concentration change resulting from photocatalytic oxidation of organic compounds on the nano-ZnO/TiO₂ film, and the COD values were calculated from the absorbance of Mn(VII). Under the optimal operation conditions, the detection limit of 0.1 mg l⁻¹, COD values with the linear range of 0.3-10.0 mg l⁻¹ were achieved. The results were in good agreement with those from the conventional COD methods.     

Visible-light photocatalytic activity of the metastable Bi20TiO32 synthesized by a high-temperature quenching method

Metastable Bi₂₀TiO₃₂ samples were synthesized by a high-temperature quenching method using α-Bi₂O₃ and anatase TiO₂ as raw materials. The photocatalytic activity of the as-prepared samples was measured with the photodegradation of methyl orange at room temperature under visible light irradiation. The Bi₂₀TiO₃₂ samples exhibited good absorption in the visible light region with a band gap of about 2.38 eV and the band structure of Bi₂₀TiO₃₂ was studied. Photodegradation against methyl orange was much better than α-Bi₂O₃ prepared by the same way. The photocatalytic activity of Bi₂₀TiO₃₂ samples is supposed to be associated with the hybridized Bi 6s and O 2p orbitals. In addition, the dispersive characteristic of Bi 6s orbital in the hybridized valence band facilitates the mobility of the photogenerated carriers and hampers their recombination.     

Wet chemical synthesis and photocatalytic activity of potassium niobate K6Nb10.8O30 powders

The nanometer potassium niobate powders with tungsten bronze (TB)-type structure were synthesized by a wet chemical method and characterized by X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM). X-ray photoelectron spectroscopy (XPS) analysis confirmed the niobium with mixed valence states exists in the crystal structure of the photocatalyst, which may be advantage for increasing the photocatalytic activity. The band gap of K₆Nb_10.8O₃₀ powders was estimated to be about 2.92 eV and shows a markedly blue-shift as compared to that of the sample obtained by the solid-state reaction. The photocatalytic activity of the samples was evaluated by degradation of acid red G under UV irradiation and the photocatalytic reaction follows first-order kinetics. The photocatalytic activity of the as-prepared sample is much higher than that of sample synthesized by solid-state reaction, and slightly higher than that of P25-TiO₂.     

室温下制备以{211}晶面为主的Ti1-xVxO2薄膜及其可见光催化性能

以金属Ti和V作为靶材,采用直流反应共溅射技术在室温下制备了以{211}晶面为主的锐钛矿相Ti_1-xV_xO₂薄膜,研究了不同V靶功率对Ti_1-xV_xO₂薄膜的薄膜成分、晶相结构和可见光催化性能的影响。研究表明,Ti_1-xV_xO₂薄膜的晶相结构为锐钛矿相,择优取向为(211),而结晶度受V靶功率的影响。随着V靶功率的增加,薄膜中V元素含量逐渐增加,同时,晶粒和沉积速率也逐渐增加。另外,当V靶功率为150W时,薄膜的表面粗糙度值有一个最大值。V的掺杂导致薄膜的能带间隙变窄,对光的吸收向可见光区偏移,从而有效地改善了薄膜的可见光催化能力。当V靶功率为150W时,Ti_1-xV_xO₂薄膜的能带间隙值为2.82eV,其在2h的可见光照射下分解了80%的RhB染料。这被归结于能带间隙窄,高能晶面{211}和结晶度高的共同作用。     

Optimization of the synthesis and characterizations of chemical bath deposited Cu2S thin films

Semiconducting copper sulphide (Cu₂S) thin films have been deposited on various substrates (SnO₂:F/glass, glass) by the simple and economical chemical bath deposition technique. The depositions were carried out during a deposition time of about 32.5 min in the pH range of 9.4 to 11. The synthesized Cu₂S thin films were characterized using various techniques without any annealing treatment. X-ray diffraction study shows that Cu₂S films exhibit the best crystallinity for pH = 10.2. For this pH value, Auger electron spectroscopy investigations show that Cu₂S thin films grown on an SnO₂/glass substrate exhibit stochiometric composition with [Cu]/[S] concentrations ratio equal to 2.02. Using the Kelvin method, the work function difference (Ф_material– Ф_probe) for the Cu₂S films deposited on SnO₂/glass substrates at the optimum pH value was found to be equal to 145 meV. Hall measurements confirm the p-type electrical conductivity of the obtained films. The electrical resistivity was of the order of 3.85 × 10⁻⁴ Ω-cm. The transmission and reflection coefficients vary in the range of [35–60] % and [5–15] % respectively, in the visible range, and the band gap energy is about 2.37 eV.     

Synthesis and photocatalytic applications of Ag/TiO2-nanotubes

TiO₂- and Ag/TiO₂-nanotubes (NTs) were synthesized by hydrothermal methods and microwave-assisted preparation, respectively. Scanning electron microscopy, high resolution transmission electron microscopy, Brunauer-Emmett-Teller particle surface area measurement and X-ray diffraction were used to characterize the nanotubes. Rutile TiO₂-NTs with Na₂Ti₅O₁₁ crystallinity had a length range of 200-400 nm and diameters of 10-20 nm. TiO₂- and Ag/TiO₂-NTs with a 0.4% deposition of Ag had high surface areas of 270 and 169 m² g⁻¹, respectively. The evaluation of photocatalytic activity showed that Ag/TiO₂-NTs displayed higher photocatalytic activity than pure TiO₂-NTs and a 60.91% degradation of Rhodamine-B with 0.8% deposition of Ag species. Also 60% of Rhodamine-6G was physisorbed and 40% chemisorbed on the surface of TiO₂-NTs. In addition, the photocatalytic degradations of organochlorine pesticides taking α-hexachlorobenzene (BHC) and dicofol as typical examples, were compared using Ag/TiO₂-NTs, and found that their degradations rates were all higher than those obtained from commercial TiO₂.     

Photocatalytic degradation of organic dyes on visible-light responsive photocatalyst PbBiO2Br

The layered compound of lead bismuth oxybromide PbBiO₂Br, prepared by conventional solid-state reaction method, has an optical band gap of 2.3 eV, and possesses a good visible-light-response ability. The references, PbBi₂Nb₂O₉, TiO_2−xN_x, BiOBr and BiOI_0.8Cl_0.2, which are excellent visible-light-response photocatalysts, were applied to comparatively understand the activity of PbBiO₂Br. Degradation of methyl orange and methylene blue was used to evaluate photocatalytic activity. The results show that PbBiO₂Br is more photocatalytically active than PbBi₂Nb₂O₉, TiO_2−xN_x and BiOBr under visible light.     

SiO2负载氮掺杂TiO2可见光响应光催化剂的制备及性能

以四氯化钛为钛源,尿素为氮源,采用液相水解-沉淀法制得SiO2负载N掺杂TiO2可见光响应TiO2-xNy/SiO2光催化剂(TSN)。以苯酚为模型物,考察了TSN在可见光区、紫外光区及太阳光下的光催化活性,以及催化剂的使用寿命、分离性能。采用XPS、FTIR、UV-Vis DRS、XRD、TEM和低温氮物理吸附等对催化剂的结构进行表征。结果表明,N以阴离子形式进入TiO2体相并置换晶格中的O,适量N掺杂的TSN在紫外光区、可见光区及太阳光下均表现出较高的活性。SiO2与TiO2界面间有Ti-O-Si键形成,结合牢固。N掺杂在TiO2表面生成Ti-O-N键,形成新的能级结构,使催化剂的吸收红移至450~500 nm,诱发TiO2可见光催化活性。SiO2负载可减小TiO2颗粒平均尺寸,增加催化剂比表面积;同时SiO2负载还可改善催化剂的分离性能,提高催化剂使用寿命。     

Enhanced photocatalytic hydrogen production under visible light of an organic-inorganic hybrid material based on enzo[1,2-b:4,5-b']dithiophene polymer and TiO2

Titanium dioxide (TiO₂) has been limited in photocatalysis due to its wide band gap (3.2 eV) and limited absorption in the ultraviolet range. Therefore, organic components have been introduced to hybrid with TiO₂ for enhanced photocatalytic efficiency under visible light. Here, we report that benzo[1,2-b:4,5-b']dithiophene polymer was an ideal organic material for the preparation of a hybrid material with TiO₂. The energy band gap of the resulting hybrid material decreased to 2.9 eV and the photocatalytic hydrogen production performance reached 745.0 µmol g^?1 h^?1 under visible light irradiation. Meanwhile, the material still maintained the stability of hydrogen production performance after 40 h of photocatalytic cycles. The analysis of the transient current response and electrochemical impedance revealed that the main reasons for the enhanced water splitting of the hybrid materials were the faster separation of electron hole pairs and the lower recombination of photocarrier ions. Our findings suggest that polythiophene is a promising organic material for exploring hybrid materials with enhanced photocatalytic hydrogen production.