Formation and properties of positively charged colloids based on polyelectrolyte complexes of biopolymers

Formation of colloids based on polyelectrolyte complexes (PECs) was mainly studied with synthetic polyelectrolytes. In this study, we describe the elaboration of positively charged PEC particles at a submicrometer level obtained by the complexation between two charged polysaccharides, chitosan as polycation and dextran sulfate (DS) as polyanion. The complexes were elaborated by dropwise addition of default amounts of DS to excess chitosan. Quasi-elastic light scattering was used to investigate in detail the influence of the characteristics of components (chain length, degree of acetylation) and parameters linked to the reaction of complexation (molar mixing ratio, ionic strength, concentration in polymer) on the sizes and polydispersity of colloids. Chain length of chitosan is the major parameter affecting the dimensions of the complexes, high molar mass chitosans leading to the largest particles. Variations of hydrodynamic diameters of PECs with the molar mass of chitosan are consistent with a mechanism of particle formation through the segregation of the neutral and then hydrophobic blocks of the polyelectrolyte complexed segments. Resulting particles display probably a structure constituted by a neutral core surrounded by a chitosan shell ensuring the colloidal stabilization. Such a structure was evidenced by measurements of electrophoretic mobilities revealing that the positive charge of particles was decreasing with pH, in relation with the neutralization of excess glucosamine hydrochloride moieties.     

Counter-ion activity and microstructure in polyelectrolyte complexes as determined by osmotic pressure measurements

We have investigated the activity of counter-ions at 60 degrees C through the osmotic coefficient K in solutions of anionic and cationic polyelectrolyte complexes of variable compositions. For excess of polyanion in the complexes (molar fraction of polycation f < 0.5), K increases as the polyanion is neutralized by the polycation (f getting closer to 0.5). By contrast, for an excess of polycation (f > 0.5), K stays constant or even slightly decreases as the polycation is getting neutralized by the polyanion. This asymmetric behavior depending on the charge of the complexes indicates that the globally negatively charged complexes are homogeneous and can be treated as a single polyelectrolyte of reduced linear charge density. On the other hand, the positively charged complexes show a micro-phase separation between neutral fully compensated microdomains and domains where the excess polycation is locally segregated. These two different microstructures are reminiscent of the coacervation and segregation regimes observed at higher concentrations and salinities, and also of polyelectrolyte complexes with oppositely charged surfactants. This interpretation is supported by two simple predictive models.     

Ion-Exchange Chromatographic Supports Obtained by Formation of Polyelectrolyte Multi-Layers for the Separation of Proteins

Summary High performance liquid chromatography (HPLC) was used to study the mechanism of formation of polyelectrolyte multilayers on porous silicas. The coatings were produced by alternating the adsorption of positively and negatively charged polymers. The stationary phases formed by adsorbing a single layer, double layers and triple layers were tested by studying the elution behavior of model proteins. The double polymer coating was achieved by adsorbing first a polycation such as hexadimethrine bromide (HB) on the HPLC silica support and then a polyanion such as dextran sulfate (DS) on the cationic layer formed. The retention properties of this support are mainly those of a cation exchanger as the negatively charged proteins were strongly retained while positively charged ones were weakly adsorbed. This work demonstrated the importance of the first underlying layer as the retention behavior of proteins was greatly affected by the properties of this coating. The triple polymer coating was achieved by adsorbing the polycation (HB) on the double layer coating (HB-DS). Its retention behavior was that of an anion exchange support. The HB-DS stationary phase displayed good chromatographic performances, with an adsorbed layer relatively stable. The polyelectrolyte multilayer coating procedure was useful to easily synthesize cation-exchange supports for the separation of basic proteins.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.     

Polyelectrolyte complexes. I. Synthesis and characterization of some insoluble polyanion-polycation complexes

The synthesis of some water-insoluble synthetic polyelectrolyte complexes formed between a weak polyanion and a strong polycation was followed. Sodium salts of poly(acrylic acid) and of some copolymers of acrylic acid with itaconic acid or maleic acid were used as anionic polymers. Cationic polyelectrolytes with quaternary ammonium salt groups in the main chain were used as strong polycations. The cationic polymers were different as concerns both the content of quaternary nitrogen atoms and the degree of branching. The complex formation was followed by the variation of the conductivity and of the specific viscosity of the reaction medium as well as by the turbidimetric titration versus the unit molar ratio polyanion/polycation. The deviation of the endpoint from stoichiometry was influenced mainly by the structure of the complementary polymers and by their molecular weights. The greater the structural differences, the higher the endpoint deviation from stoichiometry. Only insoluble polyelectrolyte complexes (PEC) were obtained in all the polyanion/polycation systems taken into account. The PECs were separated and characterized by elemental and spectral analyses as compared with the complementary polymers. © 1996 John Wiley & Sons, Inc.     

Polysaccharide films built by simultaneous or alternate spray: a rapid way to engineer biomaterial surfaces

We investigated polysaccharide films obtained by simultaneous and alternate spraying of a chitosan (CHI) solution as polycation and hyaluronic acid (HA), alginate (ALG), and chondroitin sulfate (CS) solutions as polyanions. For simultaneous spraying, the film thickness increases linearly with the cumulative spraying time and passes through a maximum for polyanion/CHI molar charge ratios lying between 0.6 and 1.2. The size of polyanion/CHI complexes formed in solution was compared with the simultaneously sprayed film growth rate as a function of the polyanion/CHI molar charge ratio. A good correlation was found. This suggests the importance of polyanion/polycation complexation in the simultaneous spraying process. Depending on the system, the film topography is either liquid-like or granular. Film biocompatibility was evaluated using human gingival fibroblasts. A small or no difference is observed in cell viability and adhesion between the two deposition processes. The CHI/HA system appears to be the best for cell adhesion inducing the clustering of CD44, a cell surface HA receptor, at the membrane of cells. Simultaneous or alternate spraying of CHI/HA appears thus to be a convenient and fast procedure for biomaterial surface modifications.     

Phase separation in solutions of polyelectrolyte complexes: The decisive effect of a host polyion

Boundaries of the existence of insoluble polyelectrolyte complexes in solutions of nonequimolar mixtures of quaternary polyamines and polycarboxylates of various degrees of polymerization have been determined with turbidimetric titration. It has been shown that in salt-free media the position of critical points expressed as the ratio between the charge numbers of polymer components in a mixture depends on the chemical nature of the host polyelectrolyte (polycation or polyanion) but does not depend on either the nature of the guest polyelectrolyte or the degree of polymerization of mixture components. Upon addition of a low-molecular-mass polyelectrolyte, the heterogeneous region widens. The shorter the host polyelectrolyte relative to the guest polyelectrolyte, the more pronounced this effect. Based on the thermodynamic state of the systems under examination, an explanation of this effect is confirmed by the velocity sedimentation data.     

Light-scattering study of polyelectrolyte complexes: Heparin with partially aminoacetalized poly(vinyl alcohol) in aqueous solution

The structure of soluble polyelectrolyte complexes composed of heparin (Hep) and partially aminoacetalized poly(vinyl alcohol) (PVAA) in aqueous solution was investigated by light scattering. The pH was fixed at 3.2 while the ionic strength and mixing ratio were varied. At high ionic strength (0.5), polyelectrolyte complexes were not formed owing to the screening effect of simple salts on polyion charges. At low ionic strength (0.005), polyelectrolyte complexes formed were stable and dispersed when either the polycation or the polyanion was in great excess, whereas the complexes became unstable and coagulated when the concentrations of polycation and polyanion approached each other. At intermediate ionic strength (0.1), when PVAA was in excess, complex formation was similar to that at low ionic strength (0.005); but with an excess of Hep, polyelectrolyte complexes with similar structure (i.e., roughly spherical with average diameters about 2,700 Å) were formed over a wide range of mixing ratio. This observation is of interest in connection with the physiological activity of Hep in vivo.     

On-line study of polyelectrolyte network formation by interfacial reaction

A modified synthetic boundary experiment of analytical ultracentrifugation has been employed to examine, on-line, polyelectrolyte complex formation at flat interfaces yielding highly swollen membranes/networks. Systematic experiments with sodium alginate as a polyanion and chitosan and poly(l-lysine) as polycations identified the influence of concentration, pH, molar mass, and polycation type on the membrane characteristics and the formation process. The membranes have been evaluated by five characteristics defined herein: total thickness, compactness, heterogeneity, symmetry, and growth. The results confirm the sensitivity of the method suited to elaborate general relationships for polyelectrolyte membrane design.     

Studies on the interaction of poly(4-vinylpyridiniumchloride) with poly(sodiumphosphate) in an aqueous solution by conductometry

A reaction between poly(4-vinylpyridiniumchloride) and poly(sodiumphosphate) in the presence and absence of NaCl and NaBr salts was studied in aqueous solution by conductometry. The interaction of polycation and polyanion gave insoluble polyelectrolyte complex which contained polycation and polyanion in unit mole ratio in a salt-free solution. A deviation from stoichiometry was observed at high polyion concentration and in the presence of NaCl and NaBr salts. The resultant complex showed swelling property in different solvent mixtures. A maximum degree of swelling was obtained in the solvent mixture of NaBr + water and NaBr + water + acetone. Furthermore, polyelectrolyte complex sorbed salts from aqueous electrolyte solutions. The sorption of salts increased with increasing salt concentration. © 1996 John Wiley & Sons, Inc.     

聚丙烯酸钠与聚(苯乙烯-co-4-乙烯基吡啶)阳离子复合作用的研究

聚电解质复合物 (Ｐｏｌｙｅｌｅｃｔｒｏｌｙｔｅｃｏｍｐｌｅｘ)是指带有相反电荷的两种聚电解质之间通过库仑力而结合形成的一类特殊的高分子材料[1 ] .由于生物体内的很多反应以及生物化学合成过程都是通过高分子复合物进行的 ,因此对高分子间相互作用及其聚集体形成的研究受到了人们的极大重视 .目前研究得较多的体系是聚苯乙烯衍生物 ,如Ｉｏｐｌｅｘ 1 0 1即由聚苯乙烯磺酸钠和聚氯化乙烯基苄基三甲基铵反应而得[2 ,3] .本文报道了不同电荷密度及相对分子质量的聚苯乙烯 ｃｏ 4 乙烯基吡啶的硫酸甲酯盐 ,与不同分子质量的聚丙烯酸钠…     

Polyelectrolyte complexes. VI. Polycation structure,polyanion molar mass,and polyion concentration effects on complex nanoparticles based on poly(sodium 2‐acrylamido‐2‐methylpropanesulfonate)

The formation and characterization of some interpolyelectrolyte complex (IPEC) nanoparticles based on poly(sodium 2‐acrylamido‐2‐methylpropanesulfonate) (NaPAMPS), as a function of the polycation structure, polyanion molar mass, and polyion concentration, were followed in this work. Poly(diallyldimethylammonium chloride) and two polycations (PCs) containing (N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride) units in the backbone (PCA₅ and PCA₅D₁) were used as starting polyions. The complex stoichiometry, (n^?/n⁺)_iso, was pointed out by optical density at 500 nm (OD₅₀₀), polyelectrolyte titration, and dynamic light scattering. IPEC nanoparticle sizes were influenced by the polycation structure and polyanion molar mass only before the complex stoichiometry, which was higher for the more hydrophilic polycations (PCA₅ and PCA₅D₁) and for a higher NaPAMPS molar mass, and were almost independent of these factors after that, at a flow rate of the added polyion of about 0.28 mL × (mL PC)^?1 × h^?1. The IPEC nanoparticle sizes remained almost constant for more than 2 weeks, both before and after the complex stoichiometry, at low concentrations of polyions. NIPECs as stable colloidal dispersions with positive charges in excess were prepared at a ratio between charges (n^?/n⁺) of 0.7, and their storage colloidal stability, as a function of the polycation structure and polyion concentration (from 0.8 to ca. 7.8 mmol/L), was demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2495–2505, 2004     

Polyelectrolyte micro- and nanoparticles with doxorubicin

Doxorubicin-containing micro- and nanoparticles obtained by layer-by-layer adsorption of dextran sulfate and chitosan on an insoluble antibiotic–polyanion complex with subsequent sonication were studied. The effects of the molecular mass of biopolymers, the number of polyelectrolyte layers, and the pH of the reaction medium on the composition, physicochemical properties, and the efficiency of doxorubicin incorporation have been examined. The release of doxorubicin and the mucoadhesive properties of the polyelectrolyte particles have been analyzed to determine the possibilities of their potential applications.     

Polyion Detection via All‐solid‐contact Paper‐based Polyion‐sensitive Polymeric Membrane Electrodes

The first all‐solid‐contact paper‐based single‐use polyion‐sensitive ion‐selective electrodes (ISEs) are described. These polyion‐sensitive ISEs are fabricated using cellulose filter paper coated with a carbon ink conductive layer. A polyanion sensing membrane is cast on a section of the coated paper and the sensor is insulated, resulting in a disposable, single‐use device. Various polyanions are shown to yield large negative potentiometric responses when using these disposable devices for direct polyanion detection. These new sensors are further demonstrated to be useful in indirect polycation detection when polycations (i. e., polyquaterniums (PQs)) are titrated with polyanionic dextran sulfate (DS). Titrations monitored using these paper‐based, all‐solid‐contact devices yield endpoints proportional to the given PQ concentration present in the test sample.     

A mycelium with polyelectrolyte complex-bunched hyphae: preparation and fermentation performance

We studied the immobilization of a mycelium (Aspergillus niger) using the working hypothesis as follows: (a) when polycation was added to the cell suspension, a few parts of it would bind on the surface of a hypha, allowing to gather the hyphae in part but not all; (b) upon further addition of polyanion, such a gathering of the hyphae is tightly bunched by the polyelectrolyte complex (PEC) which is resulted from the remaining polycation; (c) as a result, a mycelium with partially bunched hyphae can be obtained. Potassium poly(vinyl alcohol) sulfate and trimethylammonium glycol chitosan iodide [6-O-(2-hydroxyethyl-2-(trimethylamonio)-chitosan iodide) were used as the polyanion and the polycation, respectively. The optical and electron microscopic analyses showed that our immobilized cell contains many of PEC-bunched hyphae. The sedimentation rate increased with the weight ratio of PEC to dry cells and leveled off at the weight ratio larger than 0.5. The gluconic acid production from glucose was studied by a semi-large scale (1 l) cultivation of the imobilized and free cells using a jar fermentor. It was found that an apparent specific activity of the immobilized cells for glucose oxidation becomes 1.44 times that of the free cells even at a high cell density of 40 g/l.     

Polyelectrolyte complexes of carboxyl-containing polyanions: Stabilization of complexes in neutral and weakly acidic media and factors affecting this phenomenon

The stability of insoluble polyelectrolyte complexes formed by various carboxyl-containing polyanions with a positively charged partner—a linear polycation or protein—has been studied by means of turbidimetric titration. In most cases, acidification of the reaction medium leads to a significant strengthening of complexes against the action of the added salt in neutral or weakly acidic media. The data concerning the effect of the chemical nature of polymer components, the degree of polymerization, the density of charge, and the structure of their chains on the pH-dependent profiles of complex dissociation provide evidence that this effect is related to stabilization of the polyelectrolyte complex through the system of hydrogen bonds formed by carboxyl groups of a partially charged polyanion incorporated into the complex. Owing to a sharp and reversible change in the stability of systems at a pH and ionic strength of solution that are favorable for functioning of biopolymers (proteins, enzymes, antibodies, and nucleic acids), polycarboxylate polyelectrolyte complexes offer promise for solving practically important problems, for example, in biotechnology for separation of biological mixtures.     

Comparison of polyelectrolyte multilayers built up with polydiallyldimethylammonium chloride and poly(ethyleneimine) from salt-free solutions by in-situ surface plasmon resonance measurements

Polyelectrolytes offer a widespread potential for the defined modification of planar inorganic or polymer surfaces. Essential parameters for the regular adsorption of subsequent polymer layers by electrostatic interactions are the charge of polyelectrolyte and of the outermost surface region, the surface of the substrate, and the molar mass of the polyelectrolyte. To study such effects in mono- and multilayers we used poly(diallyldimethylammonium chloride (PD) with a molar mass from 5000 to 400000 g/mol as a strong polycation and poly(ethyleneimine) (PEI) with 75000 g/mol as a weak polycation and poly(sodium styrenesulfonate) (PSS) from 70000 to 1Mio g/mol in the diluted and semi-diluted region. The characterization of the layers was performed by streaming potential, in-situ SPR and UV-Vis spectroscopy. Thereby the layer built up at the solid/liquid-interface could be followed and quantified at the molecular level. SPR revealed that the thicknesses of the multilayer depends strongly on pK values of the polyelectrolyte (strong or weak) and the molar masses. We observed a linear growth if both polyelectrolytes are strong and an exponential growth if one polyelectrolyte is weak. The thickness increased with higher molar masses of the polyelectrolytes. The process was followed in-situ in short time steps.     

Towards a microchip-based chromatographic platform. Part 2: sol-gel phases modified with polyelectrolyte multilayers for capillary electrochromatography.

The potential for using polyelectrolyte multilayers (PEMs) to provide chromatographic functionality on continuous silica networks created from sol-gel chemistry has been evaluated by capillary electrochromatography (CEC). Construction of the PEM was achieved by flushing the column with polyelectrolytes of alternative charge, with variation of the properties of the exposed polyelectrolyte providing a unique means to vary the chromatographic surface. Variation of the exposed polyelectrolyte from poly(diallyldimethylammonium chloride) (PDDAC) to dextran sulfate (DS) allowed the direction of the electroosmotic flow (EOF) to be changed and also provided a means to vary the chromatographic capacity. Variation of negative polymer from DS to poly(styrene sulfonate) (PSS) significantly altered the EOF and the migration of peptides, with both the reversed-phase and ion-exchange capacities increasing. An alternative method for changing the column capacity was to change the thickness of the PEM, which was evaluated by anion-exchange CEC. A 70-80% increase in retention was observed for all anions without any increase in EOF suggesting significant penetration of the analytes through the PEM and interaction with buried charges within the PEM.     

Polyelectrolyte complex dispersions with a high colloidal stability controlled by the polyion structure and titrant addition rate

Three ionic/nonionic random copolymers of sodium 2-acrylamido-2-methylpropanesulfonate (AMPS) with either t-butyl acrylamide (TBA) or methyl methacrylate (MM), were used in the preparation of some polyelectrolyte complex dispersions (PCD) with two strong polycations of integral type, poly(diallyldimethylammonium chloride) (PDADMAC), and an ionene type polycation, containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride repeat units (PCA₅). The novelty of the paper is that PCDs with a high colloidal stability, both before and after the complex stoichiometry, were obtained even with hydrophilic/hydrophobic polyanions, with a high titrant addition rate (TAR), a less explored parameter, which allows a fine control of PCDs aggregation level, in salt-free aqueous solutions. The characteristics of PCDs were also correlated with the polyanion average charge density and the structure of the nonionic comonomer, at a constant TAR, the polyanion with the lowest charge density leading to the highest turbidities and the lowest colloidal stabilities. A mechanism of the PCDs colloidal stabilization as a function of TAR was suggested in the paper.     

Reinvestigation on the buildup mechanism of alternate multilayers consisting of poly(L-glutamic acid) and poly(L-, D-, and DL-lysines)

The buildup mechanism of polypeptide multilayers prepared by the layer-by-layer deposition of a polyanion (poly(L-glutamic acid) (PGA)) and polycations (poly(L-lysine) (PLL), poly(D-lysine) (PDL), and copoly(DL-lysine)(PDLL)) was reinvestigated by using in situ ATR-IR spectroscopy. A difference spectral technique applied to analyze the spectra indicated that the deposition of both the PGA and PLL (PDL) layers accompanies the formation of secondary structures consisting mainly of the antiparallel pleated sheet (the beta-sheet) structure, and that the formation of the beta-sheet structure cannot always be explained in terms of polyanion/polycation complex formation or charge compensation between the polyanion and polycations, although it has been considered as a major process in the multilayer buildup process. Instead, the present paper proposes the following mechanism. During the deposition of the polyelectrolyte, a small amount of the beta-sheet structures are produced at the interface as a result of charge compensation between a polyelectrolyte and an oppositely charged polyelectrolyte in the multilayer. The beta-sheets act as nuclei from which further propagation of the structure takes place at the solution/multilayer interfaces. The driving force of the buildup process in the new mechanism is a kinetically favorable insolubilization of each polyelectrolyte in solution at the interfaces.