Electrocatalytic degradation of pesticide micropollutants in water by high energy pulse magnetron sputtered Pt/Ti anode

The increasing occurrence of pesticide micropollutants highlights the need for innovative water treatment technologies, particularly for small-community and household applications. Electro-oxidation is being widely studied in this area, unfortunately, safe, stable and efficient electrocatalytic anodes without released heavy metal ions are still highly required. In this study, we fabricated a Pt/Ti anode by high energy pulse magnetron sputtering (HiPIMS-PtTi) which was used to decompose dichlorvos (DDVP) and azoxystrobin (AZX) in water. The results show that the reaction rate constant (k_ENR) on HIPIMS was 35.7 min^–1 (DDVP) and 41.3 min^–1 (AZX), respectively, superior to electroplating Pt/Ti anode (EP-PtTi). The identification of radicals (^?OH, ¹O₂, ^?O₂^?) and micro-area analyses evidenced that Pt atoms were embedded into the TiO₂ lattice on the surface of Ti plate by high-energy ions, which resulted in more adsorbed hydroxyls, and higher production of ^?OH under polarization conditions. Besides, the electro-oxidation intermediates of DDVP and AZX were identified and the degradation pathways were speculated: (1) indirect oxidation dominated by ^?OH attack, and (2) direct electron transfer reaction of pesticides on the anode surface. The cooperated reactions achieve the complete degradation and highly efficient mineralization of DDVP and AZX.     

Initial applications of phospholipid-coated mercury electrodes to the determination of polynuclear aromatic hydrocarbons and other organic micropollutants in aqueous systems

Mercury electrodes coated with di-oleoyl lecithin are described for the determination of polynuclear aromatic hydrocarbons (PAHs) and other micropollutants in aqueous solutions. The coated electrodes give a characteristic response in the capacitance/voltage curve to three-, four- and five- ring PAHs. The extent of the negative potential shift in the reversible capacitance peaks (and thus sensitivity) is related to the number of aromatic rings and substituents on the PAH. The capacitance/voltage curves were recorded by phase-sensitive a.c. voltammetry. The response is quantitatively related to the concentration of PAH in solution. Detection limits are about 0.4 μg l^?1 and the reproducibility (RSD) for separate samples is 7%. Intercalibration of the method with fluorescence spectrophotometry of pyrene-spiked sea-water samples, showed recoveries of 80%. The analytical system is useful for sea water and tap water. Bovine serum albumin (1 mg l^?1) enhances the sensitivity to pyrene. The monolayer is sensitive to oil-contaminated waters ( > 40 μg l^?1). The capacitance peaks respond selectively to other groups of compounds and to individual compounds within a group. The monolayer appears highly sensitive to the solution behaviour of PAHs because only soluble unbound PAHs penetrate the monolayer. Humic acid added to the solution decreases the response to PAH presumably by binding a fraction of PAH in the solution.     

Comparative study of hydroxo-fluoro and hydroxo-sulphido mixed ligand complexes of aluminum(III) and gallium(III)

The mixed ligand complex formation had been studied in the aluminate-fluoride, gallate-fluoride, aluminate-sulphide and gallate-sulphide systems by spectrophotometric as well as potentiometric methods using glass and sulphide selective electrodes. The formation of the species Al(OH)₃F^? and Ga(OH)₂S^? has been demonstrated and the equilibrium constants have been determined. Similar interaction could not be detected in the aluminate-sulphide and gallate-fluoride systems.The differences in behaviour of the metal ions to the characteristically hard fluoride and soft sulphide ligands can be interpreted in that the Ga³⁺ ion may form complexes with charged soft ligands too, its behaviour then differing from that of the typically hard Al³⁺ ion.     

The Measurement of the Gibbs Energy of Transfer Between Oil and Water Using a Nano‐Carbon Paste Electrode

The use of nano‐carbon paste electrodes for the measurement of Gibbs energies of transfer between oil and aqueous phases is reported. In this method the oil of interest is used as the binder for the nano‐carbon paste electrodes and the molecule of interest is dissolved in the organic or aqueous phase. Voltammetry is performed over a period of time and used to monitor the transfer of the molecule between the two phases. The method is illustrated for the transfer of ferrocenemethanol between water and oil using the ferrocenemethanol / ferroceniummethanol (FcCH₂OH/FcCH₂OH⁺) redox couple. Three pairs of voltammetric peaks were observed in a 0.1 M KCl solution when the nano‐carbon paste electrode was modified by dissolution of FcCH₂OH in the binder oil: P1 [E=0.23 V, 0.17 V vs. Ag/AgCl (1 M KCl)], P2 [E=0.36 V, 0.32 V vs. Ag/AgCl (1 M KCl)] and P3 [E=0.55 V, 0.46 V vs. Ag/AgCl (1 M KCl)]. These are assigned to the FcCH₂OH species existing in the aqueous solution [FcCH₂OH(aq)/FcCH₂OH⁺(aq)], originating in the oil (o) [FcCH₂OH(o)/FcCH₂OH⁺(aq)] and to oxidation of adsorbed (ads) material on the nano‐carbon [FcCH₂OH(ads)] respectively. When supporting electrolyte containing the anions Cl^?, NO₃^? or SCN^? was used, an expulsion of the oxidised ferrocene occurred and the difference in midpoint potentials (E_mid) between the peaks P1 and P2 observed in these experiments allowed the calculation of the Gibbs energy (ΔG°) of transfer of ferrocenemethanol from water to oil. The average ΔG° value thus obtained was (?12.7±0.2) kJ mol^?1. For more hydrophobic anions (X^?=PF₆^?, AsF₆^?), the electron transfer is coupled to the transfer of the anion into the oil and the ΔG° for the transfer of the ion pair of FcCH₂OH⁺ and X^? ions from water to oil was found to be ?1.3 and ?3.9 kJ mol^?1 for PF₆^? and AsF₆^? respectively.     

Measurement of Reactive Hydroxyl Radical Species Inside the Biosolutions During Non-thermal Atmospheric Pressure Plasma Jet Bombardment onto the Solution

Non-thermal atmospheric pressure plasma jet could generate various kinds of radicals on biosolution surfaces as well as inside the biosolutions. The electron temperature and ion density for this non-thermal plasma jet have been measured to be about 0.8~1.0 eV and 1 × 10¹³ cm^?3 in this experiment, respectively, by atmospheric pressure collisional radiative model and ion collector current. In this context, the hydroxyl OH radical density inside the biosolutions has been also investigated experimentally by ultraviolet absorption spectroscopy when the Ar non-thermal plasma jet has been bombarded onto them. It is found that the emission and absorption profiles for the other reactive oxygen species such as NO (226 nm) and O₂*^? (245 nm) are shown to be very small inside the biosolution in comparison with those for the OH radical species. It is found that the densities of OH radical species inside the biosolutions are higher than those on the surface in this experiment. The densities of the OH radical species inside the deionized water, Dulbecco’s modified eagle medium, and phosphate buffered saline are measured to be about 2.1 × 10¹⁶, 1.1 × 10¹⁶, and 1.0 × 10¹⁶ cm^?3, respectively, at 2 mm downstream from the surface under optimized Ar gas flow of 200 sccm. It is also found that the critical hydroxyl OH radical density for the lung cancer H460 cells to experience an apoptosis is observed to be around 0.3 × 10¹⁶ cm^?3 under 1 min plasma exposure in this experiment.     

Preparation of grain size controlled boron-doped diamond thin films and their applications in selective detection of glucose in basic solutions

Boron-doped diamond (BDD) thin films with different crystal grain sizes were prepared by controlling the reacting gas pressure using hot filament chemical vapor deposition (HFCVD). The morphologies and structures of the prepared diamond thin films were characterized by scanning electron microscopy (SEM) and Raman spectroscopy. The electrochemical responses of K₄Fe(CN)₆ on different BDD electrodes were investigated. The results suggested that electron transfer was faster at the boron-doped nanocrystalline diamond (BDND) thin film electrodes in comparison with that at other BDD thin film electrodes. The prepared BDD thin film electrodes without any modification were used to directly detect glucose in the basic solution. The results showed that the as-prepared BDD thin film electrodes exhibited good selectivity for detecting glucose in the presence of ascorbic acid (AA) and uric acid (UA). The higher sensitivity was observed on the BDND thin film grown on the boron-doped microcrystalline diamond (BDMD) thin film surface, and the linear response range, sensitivity and the low detection limit were 0.25–10 mM, 189.1 μA mmo^?1 cm^?2 and 25 μM (S/N=3) for glucose in the presence of AA and UA, respectively.     

Electrochemical Quartz Crystal Impedance Study of Glucose Oxidation on a Nickel Hydroxide Modified Au Electrode in Alkaline Solution

The electrochemical quartz crystal impedance (EQCI) technique has been applied to investigate glucose oxidation on bare and Ni(OH)₂‐modified Au electrodes in 0.2 mol L^?1 KOH aqueous solution. The EQCI responses suggest different contributions of H⁺‐release and OH^?‐incorporation reactions of the Ni(OH)₂‐film redox process in 0.2 mol L^?1 aqueous KOH at different potentials. Glucose adsorption on the Ni(OH)₂‐modified Au electrode was studied. A mechanism for potential cyclic redox process of glucose at Ni(OH)₂‐modified Au electrode is suggested, mainly based on a comparative EQCI analysis with direct glucose oxidation on bare gold and glucose ad‐/desorption on Ni(OH)₂ film.     

Wastewater treatment with ionizing radiation

In water treatment by ionizing radiation ^·OH is suggested to initiate the degradation of organics. In these reactions mostly carbon centred radicals form. Here we show that other inorganic radicals also highly contribute to the initiation of degradation. Cl^? and HCO₃ ^? in the treated water reacting with ^·OH transform to Cl ₂ ^·? and CO ₃ ^·? . In their reactions C-centred radicals form, too. The reactions of e _aq ^? and H^· water radiolysis intermediates may also produce carbon centred radicals. The C-centred radicals react readily with dissolved O₂, this is the starting step of the gradual oxidation.     

Efficient activation of peroxymonosulfate by hollow cobalt hydroxide for degradation of ibuprofen and theoretical study

Hollow microsphere structure cobalt hydroxide (h-Co(OH)₂) was synthesized via an optimized solvothermal-hydrothermal process and applied to activate peroxymonosulfate (PMS) for degradation of a typical pharmaceutically active compound, ibuprofen (IBP). The material characterizations confirmed the presence of the microscale hollow spheres with thin nanosheets shell in h-Co(OH)₂, and the crystalline phase was assigned to α-Co(OH)₂. h-Co(OH)₂ could efficiently activate PMS for radicals production, and 98.6% of IBP was degraded at 10 min. The activation of PMS by h-Co(OH)₂ was a pH-independent process, and pH 7 was the optimum condition for the activation-degradation system. Scavenger quenching test indicated that the sulfate radical (SO₄^{? ?}) was the primary reactive oxygen species for IBP degradation, which contributed to 75.7%. Fukui index (f ^?) based on density functional theory (DFT) calculation predicted the active sites of IBP molecule for SO₄^{? ?} attack, and then IBP degradation pathway was proposed by means of intermediates identification and theoretical calculation. The developed hollow Co(OH)₂ used to efficiently activate PMS is promising and innovative alternative for organic contaminants removal from water and wastewater.     

Assessment of the fate of some household micropollutants in urban wastewater treatment plant

Everyday domestic activity is a significant source of water pollution. The presence of six household micropollutants in an urban wastewater treatment plant (WWTP) was assessed in wastewater and sludge. A multi-target analytical method was developed for the quantification of ibuprofen, erythromycin, ofloxacin, 4-nonylphenol, 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan), and sucralose. The micropollutants were extracted from the liquid and solid phases and their concentrations were determined by LC-MS/MS. The efficiency of micropollutants’ removal within a conventional activated sludge process was assessed. From 50 % to 90 % of ibuprofen and erythromycin was removed from the wastewater liquid phase. Their removal can be attributed to biological degradation as they were not found adsorbed on the outlet sludge. Ofloxacin and triclosan were removed from the liquid phase with similar efficiencies; however, they were adsorbed on the sludge, so it was not possible to determine their removal mechanism (whether biodegradation or displacement to solid phase/sequestration). Sucralose was not removed from wastewater (3 μg L^?1 in inlet and outlet liquid phase) and not adsorbed on the sludge. 4-Nonylphenol concentrations were sometimes higher in the WWTP outlet water; this may relate to the degradation of alkylphenol ethoxylates in the wastewater treatment process. 4-Nonylphenol was always present in the outlet sludge.     

Investigation of Aluminate Solutions by water activity measurement

Isopiestic measurements were used to determine the change in water activity due to the variation of the aluminium content of alkaline aluminate solutions. This parameter was found suitable to indicate the concentration dependence of the species present in the solution. It was established that the increase of water activity due to the increased aluminium concentration can be attributed to two processes: 1. the coordination of hydroxide ion to aluminium, 2. dimerization connected with the dehydration of the monomeric species. On the basis of the Gibbs-Duhem equation the water activity data gave an indication of the concentration ranges in Which the sodium aluminate solution exists mainly as (I) NaOH + monomeric Al(OH)₄^? and ( H ) NaOH + dimeric Al₂ O(OH)₆ ^2? ions.     

A quantum mechanical approach to the kinetics of the hydrogen abstraction reaction H2O2 + •OH → HO2 + H2O

The kinetics of the hydrogen abstraction from H₂O₂ by ^?OH has been modeled with MP2/6‐31G*//MP2/6‐31G*, MP2‐SAC//MP2/6‐31G*, MP2/6‐31+G**//MP2/6‐31+G**, MP2‐SAC// MP2/6‐31+G**, MP4(SDTQ)/6‐311G**//MP2/6‐31G*, CCSD(T)/6‐31G*//CCSD(T)/6‐31G*, CCSD(T)/6‐31G**//CCSD(T)/6‐31G**, CCSD(T)/6‐311++G**//MP2/6‐31G* in the gas phase. MD simulations have been used to generate initial geometries for the stationary points along the potential energy surface for hydrogen abstraction from H₂O₂. The effective fragment potential (EFP) has been used to optimize the relevant structures in solution. Furthermore, the IEFPCM model has been used for the supermolecules generated via MD calculations. IEFPCM/MP2/6‐31G* and IEFPCM/CCSD(T)/6‐31G* calculations have also been performed for structures without explicit water molecules. Experimentally, the rate constant for hydrogen abstraction by ^?OH drops from 1.75 × 10^?12 cm³ molecule^?1 s^?1 in the gas phase to 4.48 × 10^?14 cm³ molecule^?1 s^?1 in solution. The same trend has been reproduced best with MP4 (SDTQ)/6‐311G**//MP2/6‐31G* in the gas phase (0.415 × 10^?12 cm³ molecule^?1 s^?1) and with EFP (UHF/6‐31G*) in solution (3.23 × 10^?14 cm³ molecule^?1 s^?1). © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 502–514, 2005     

CuO Crystalline Modified Glassy Carbon Electrodes for Anodic Amperometric Determination of Hydrogen Peroxide

As an alternative selection of electrocatalytic surface modifier, the electrochemically generated copper oxides is re‐ investigated by using cyclic voltammetry (CV), scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). Interesting phenomena have been found, which indicate that the electrodeposition from the Cu²⁺ solution under cyclic voltammetric conditions can generate a transparent Cu(OH)₂ crystalline on the surface of glassy carbon electrodes, and this crystalline can be further transferred to a novel cubic opaque CuO crystalline of about 300 nm in size by second step of cyclic voltammetry in pH 12 NaOH solution. The final electrode (denoted as nano‐CuO/GCE) can catalyze the oxidation (as well as the reduction) of H₂O₂ in basic solutions. It shows pH dependent three‐part catalytic mechanism in the range from pH 7 to pH 14. In 0.10 mol/L NaOH solution, the amperometric response at 0.15 V (vs. SCE) can give a current sensitivity as high as 139 mA/(mol·L^?1) in the rage of 5.0×10^?7?6.0×10^?4 mol/L with a lower detection limit (s/n=3) of 2.5×10^?8 mol/L, and a current sensitivity of 78.4 mA/(mol·L^?1) in the rage of 6.0×10^?4–2.0×10^?3 mol/L. This electrode also has excellent reproducibility and stability. The mechanisms for the two steps of preparation and the catalytic reactions are proposed. The nano‐CuO crystalline modified electrode may have more applications in the field of electrochemical sensing.     

Sensitivity Enhancement in Nickel Hydroxide/3D‐Graphene as Enzymeless Glucose Detection

A nickel hydroxide (Ni(OH)₂)/3D‐graphene composite is used as monolithic free‐standing electrode for enzymeless electrochemical detection of glucose. Ni(OH)₂ nanoflakes are synthesized by using a simple solution growth procedure on 3D‐graphene foam which was grown by chemical vapor deposition (CVD). The pore structure of 3D‐graphene allows easy access to glucose with high surface area, which leads to glucose detection with an ultrahigh sensitivity of 3.49 mA mM^?1 cm^?2 and a significant lower detection limit up to 24 nM. Cyclic voltammetry (CV) and potentionstatic mode is used for non‐enzymatic glucose sensing. The impedance and effective surface area have been studied well. The high sensitivity, low detection limit and simple configuration of Ni(OH)₂/three dimensional (3D)‐graphene composite electrodes can evoke its industrial application in glucose sensing devices.     

Progress and prospect of anodic oxidation for the remediation of perfluoroalkyl and polyfluoroalkyl substances in water and wastewater using diamond electrodes

Although diamond electrodes are widely used in the field of electroanalysis and sensing, their application in the field of environmental engineering has yet to be fully realized. Many research studies have considered their potential application in water and wastewater treatment, where the in-situ electrochemical process can avoid the need for chemical additives by facilitating the oxidation of pollutants on the electrode surface or mediated by electrochemically synthesized oxidants in solution. Diamond-based electro-oxidation can effectively treat a number of organic micropollutants and is now being evaluated for the abatement of perfluoroalkyl and polyfluoroalkyl substances, which pose health concerns and are ubiquitous recalcitrant environmental contaminants. To move implementation of diamond-based electro-oxidation forward, the integration of modifications and codopants to yield more advanced electrode materials needs to be further developed and understood. The progress and current strategies associated with diamond electrode modifications for perfluoroalkyl and polyfluoroalkyl substances abatement as well as future considerations are discussed.     

Radical-induced destruction of diethyl phthalate in aqueous solution: kinetics, spectral properties, and degradation efficiencies studies

In this work, the reactions of ^?OH, e _aq ^? , and SO ₄ ^?? with diethyl phthalate (DEP) were investigated in aqueous solution by pulse radiolysis, and degradation efficiencies of DEP with ^?OH and e _aq ^? were evaluated in water using steady-state radiolysis as well. The absolute rate constants of ^?OH, e _aq ^? , and SO ₄ ^?? with DEP were determined as 2.3 × 10⁹, 1.0 × 10¹⁰, and 1.0 × 10⁸ M^?1 s^?1, respectively. The degradation efficiencies for the ^?OH and e _aq ^? reactions were 81 and 33 %, respectively. Transient absorption spectra were observed for the intermediate radicals produced by ^?OH, e _aq ^? , and SO ₄ ^?? reactions. The results suggested that e _aq ^? transferred to the ester group, resulting in the formation of DEP radical anions. In contrast, ^?OH and SO ₄ ^?? added predominantly to the aromatic ring of DEP, forming the corresponding ^?OH adducts. The fundamental mechanistic parameters and degradation efficiencies derived from these results were significant for evaluations and applications of advanced oxidation processes.     

Electroanalytical Determination of Carbaryl in Natural Waters on Boron Doped Diamond Electrode

The anodic voltammetric behavior of carbaryl on a boron‐doped diamond electrode in aqueous solution is reported. The results, obtained by square‐wave voltammetry at 0.1 mol L^?1 Na₂SO₄ and pH 6.0, allow the development of a method to determine carbaryl, without any previous step of extraction, clean‐up, preconcentration or derivatization, in the range 2.5–30.0×10^?6 mol L^?1, with a detection limit of 8.2±0.2 μg L^?1 in pure water. The analytical sensitivity of this electrochemical method diminished slightly, from 3.07 mA mmol^?1 L to 2.90 mA mmol^?1L, when the electrolyte was prepared with water samples collected from two polluted points in an urban creek. In these conditions, the recovery efficiencies obtained were around 104%. The effect of other pesticides (fenthion and 4‐nitrophenol) was evaluated and found to exert a negligible influence on carbaryl determination. The square‐wave voltammetric data obtained for carbaryl were typical of an irreversible electrode process with mass transport control. The combination of square‐wave voltammetry and diamond electrodes is an interesting and desirable alternative for analytical determinations.     

MIL-101(Cr)-decorated Ti/TiO2 anode for electrochemical oxidation of aromatic pollutants from water

Hydroxyl radicals (^?OH) generated on anode play a vital role in electrochemical oxidation (EO) of organic pollutants for water treatment. Inspired by the four-electron oxygen evolution reaction (OER), we supposed an anode-selection strategy to stabilize deeply oxidized states (*O and *OOH) which are beneficial to generating ^?OH. To verify the hypothesis, a candidate anode component (MIL-101(Cr), a well-known metal-organic framework with active variable-valence transition metal centers) was used to coat Ti/TiO₂ plate to fabricate anodes. Compared to TiO₂(101) plane on undecorated anode surface, fast and complete removal of aniline and phenol, and improved energy utilization were achieved on MIL-101(Cr)-coated-Ti/TiO₂ anode. Mechanism investigation, including pollutant degradation pathways, showed the predominate contribution (69.60%–75.13%) of ^?OH in pollutant mineralization. Density functional theory (DFT) computations indicated Cr site in MIL-101(Cr) was more conducive to stabilizing *O and *OOH, leading to thermodynamical spontaneous generation of ^?OH. This work opens up an exciting avenue to explore ^?OH production, and supplies a useful guidance to the development of anode materials for EO process.     

EPR and Spectrophotometric Studies of Free Radicals (O2°−, °OH, BPD-MA°−) and Singlet Oxygen (1O2) Generated by Irradiation of Benzoporphyrin Derivative Monoacid Ring A

Abstract— Benzoporphyrin derivative monoacid ring A (BPD-MA), a chlorin-type molecule, is a new photosensitizer currently in phase II clinical trials for the treatment by pho-todynamic therapy of cancerous lesions, psoriasis and pathologic neovascularization. The photochemistry (type I and/or II) of BPD-MA has been studied in homogeneous solution and in aqueous dispersions of unilamellar liposomes of dipalmitoylphosphatidylcholine (DPPC) using electron paramagnetic resonance and spectrophotometric methods. When oxygen-saturated solutions of BPD-MA were illuminated with 690 nm light, singlet oxygen (¹O₂), superoxide anion radical (O₂^?), hydroxyl radical (OH) and hydrogen peroxide (H₂O₂) were formed. The BPD-MA generates ¹O₂ with a quantum yield of ca 0.81 in ethanolic solution. The quantum yield does not change upon incorporation of BPD-MA into liposomes of DPPC. The superoxide anion radical was generated by the BPD-MA anion radical (BPD-MA^?) via electron transfer to oxygen, and this process was significantly enhanced by the presence of electron donors. The rate of production of 0₂ was also dependent on the concentration of BPD-MA used (3-100 μM). The quantum yield of O₂^?was found to be 0.011 and 0.025 in aqueous solution and DPPC liposomes, respectively. Moreover, O₂^_upon dis-proportionation can generate H₂O₂ and ultimately the highly reactive OH via the Fenton reaction. In anaerobic homogeneous solution, BPD-MA^?was predominantly photoproduced via the self-electron transfer between the excited- and ground-state species. The presence of an electron donor significantly promotes the reduced form of BPD-MA. These findings suggest that the photodynamic action of BPD-MA may proceed via both type I and type II mechanisms.     

Semiconductor properties of nanocrystalline diamond electrodes

The semiconductor properties of nitrogenated nanocrystalline diamond electrodes and their corrosion transformations caused by electrochemical experiment in indifferent electrolyte (1 M K₂SO₄) were studied by the electrochemical impedance spectroscopy method. It was shown that after electrochemical measurements a narrow diamond peak at 1335.7 cm^?1 appears in the Raman spectrum; formerly the peak was hidden at a background of the intense signal inherent to graphite-like carbon. It was suggested that the corrosion damage caused by the exposure to electrochemical experiment resulted in a decrease of relative amount of nondiamond (graphite-like) carbon in the subsurface layer in the nanocrystalline diamond. By using Mott-Schottky plots, the nanocrystalline diamond was shown having n-type conductance. Within the bounds of the “effective medium” approach, the nanocrystalline diamond’s flat-band potential in aqueous solution and the noncompensated donor apparent concentration were estimated.