Polymerization of 2,2,2-trifluoroethyl vinyl ether

The polymerization of 2,2,2-trifluoroethyl vinyl ether by six different catalyst systems was examined. Low-temperature studies (?78°C) with boron trifluoride etherate catalyst in hydrocarbon and chlorinated solvents slowly yielded low molecular weight polymers which were amorphous and noncrystallizable upon cold drawing. Under similar conditions, polymerizations with boron trifluoride gas were spontaneous, quantitative, and gave relatively high molecular weight, form-stable, amorphous polymer. Heterogeneous polymerizations with chromium trioxide crystals in toluene at 68°C and bulk reactions with ethylmagnesium bromide–carbon tetrachloride catalyst at 40°C failed to produce polymer. Room temperature runs with triisobutylaluminum–titanium tetrachloride catalyst gave amorphous, tacky material. Aluminum hexahydrosulfate heptahydrate (AHS) initiated polymerizations conducted at 25 and 60°C gave low yields of mixtures of amorphous and crystalline polymers, the ratio depending upon the polymerization solvent employed. The infrared spectra and x-ray diffraction intensity curves of crystalline and amorphous poly(trifluoroethyl vinyl ether) are reported and compared herein for the first time.     

Synthesis of block copolymers containing poly(ferrocenylmethyl methacrylate) units

Ferrocenylmethyl methacrylate (FMMA) has been polymerized by using LiAlH₄–tetramethyl-ethylenediamine initiation to form living polymers in high vacuum systems. The addition of methyl methacrylate or acrylonitrile to these living systems gave the block copolymers FMMA-block MMA and FMMA-block AN. The anions were not nucleophilic enough to initiate styrene polymerization. Therefore, living polystyrene was prepared (sodium naphthalide initiation in THF at ?78°C) and upon FMMA addition, styrene-block FMMA copolymers were formed. Extraction, precipitation, and gel-permeation chromatography studies were performed to examine the purity of the block copolymers.     

Electron spin resonance studies of propagating radicals in polymerization. I. Methacrylate propagating radicals

Ferric chloride-photosensitized free-radical initiation was used to generate propagating radicals in polymerization of methacrylic acid (MAA), allyl methacrylate (AMA), methyl methacrylate (MMA), 1,3-butylene dimethacrylate (1,3-BDMA), hydroxypropyl methacrylate (HPMA), lauryl methacrylate (LMA), hexyl methacrylate (HMA), and methacrylamide (MA) in rigid glasses of methanol or acetone at near liquid nitrogen temperatures. The formation and conformational changes of these propagating radicals at different temperatures were studied by electron spin resonance (ESR) spectroscopy. When methanol was the rigid glass, ·CH₂OH radicals were formed initially and were stable below ?160°C. As the temperature of the rigid glass was increased, the ·CH₂OH radicals reacted with monomer to yield propagating radicals. With the exception of the propagating radical for methacrylamide, the propagating radicals of the methacrylates examined initially generated five-line ESR spectra which gradually changed to nine-line spectra, as temperature of the rigid glass was increased. It was concluded that one type of propagating radical was formed in all cases. However, when the temperature of the rigid glass was increased, the single structural conformation that initially allowed one of the methylene hydrogens and methyl group to interact with the unpaired electron to generate only a five-line spectrum was changed to yield a second conformation that allowed interaction to generate an additional four-line spectrum. Finally, a mixture of the propagating radical for methacrylate monomer in two structural conformations was obtained, and an ESR spectrum consisting of nine lines (5 + 4 lines) was generated. In the case of the propagating radical for methacrylamide this change to yield two structural conformations evidently was hindered, so that only an ESR spectrum consisting of five lines was generated.     

Polaron dynamics of heavily doped regioregular and regiorandom poly(3-alkylthiophenes) revealed by electron spin resonance spectroscopy

Electron spin resonance (ESR) features in heavily doped conjugated polymers are investigated through the comparison of temperature dependences of ESR spectra between head-to-tail coupled regioregular (RR) and regiorandom (RRa) poly(3-octylthiophenes) (P3OTs). RR-P3OT, used as a model of having crystalline grains in the solid film, is found to exhibit anisotropic ESR spectra, whereas RRa-P3OT gives almost isotropic ESR spectra similar to those of usual heavily doped conjugated polymers. This difference in the degree of spectral anisotropy primarily arises from a difference in their film morphology. Spectral simulations show the anisotropy observed in RR-P3OT to be caused by g-anisotropy. The presence of the g-anisotropy in RR-P3OT indicates that its polarons spend most of the time within a single crystalline grain that has some domains with a common direction of the g-tensor. The g-anisotropy turns out to decrease with increasing temperature. This result is explained by thermally activated hopping motions between crystalline grains. We emphasize that the decrease in the g-anisotropy with temperature should be associated with its activated type of temperature dependence of conductivity. In RRa-P3OT, its isotropic ESR spectra are suggested to be caused by the interchain motion as well as the intrachain one.     

ESR study on free radicals trapped in crosslinked polytetrafluoroethylene (PTFE)

Free radicals in crosslinked PTFE which formed by ⁶⁰Co γ-rays irradiaion at 77 K and at room temperature were studied by electron spin resonance (ESR) spectroscopy. The crosslinked PTFE specimens with different crosslinking density were prepared by electron beam irradiation in the molten state. The ESR spectra observed in the irradiated crosslinked PTFE are much different from those in non-crosslinked PTFE (virgin); a broad singlet component increases with increasing the crosslinking density, G-value of radicals is much higher in crosslinked PTFE than in non-crosslinked one. Free radicals related to the broad component are trapped in the non-crystalline region of crosslinked PTFE and rather stable at room temperature, whereas radicals trapped in amorphous non-crosslinked PTFE are unstable at room temperature. It is thought that most of free radicals trapped in the crosslinked PTFE are formed in the crosslinked amorphous region. The trapped radicals decays around 383 K (110°C) due to the molecular motion of -relaxation.     

Polymers having stable radicals. I. Synthesis of nitroxyl polymers from 4-methacryloyl derivatives of 2,2,6,6-tetramethylpiperidine

Polymers having stable nitroxyl free radicals, poly-4-methacryloylamino- and poly-4-methacryloyloxy-2,2,6,6-tetramethylpiperidine-1-oxyls, were synthesized from their precursor polymers by oxidizing them in a methanolic solution of hydrogen peroxide. The precursor polymers were prepared by radical polymerization of 4-methacryloyl-amino/oxy-2,2,6,6-tetramethylpiperidines in various solvents. These polymerizations in acetic acid were found to yield polymers of high molecular weight. The copolymers of the precursor monomers with styrene and methyl methacrylate were also prepared as precursor copolymers. These precursor polymers of a piperidine type were converted to the polymers having stable nitroxyl free radicals by the hydrogen peroxide method. In this report, it was assumed that the post-oxidation reaction introduced a nitroxyl group smoothly and quantitatively at room temperature. Elucidations of the stable radical formation and the electron spin behavior of the stable radical polymers were made in terms of elemental analyses, infrared, ultraviolet, and ESR spectroscopy.     

Radiation-induced polymerization of vinyl monomers adsorbed on inorganic substances. VI. Temperature dependence and effects of additives on methyl methacrylate–silica gel system

To elucidate the reaction mechanism of radiation-induced polymerization of methyl methacrylate adsorbed on silica gel, the temperature dependence and effects of acetone and pyridine were investigated. It was found that even at ?78°C the polymerization rate was quite fast. The amounts of high molecular weight GPC peaks of both graft polymers and homopolymers increased with increasing irradiation temperature. The activation energy of the adsorbed state polymerization was low compared with that of bulk polymerization. The low molecular weight peaks of homopolymers decreased with acetone addition but were almost unaffected by pyridine. The low molecular weight peaks of homopolymers were thus polymerized by an anionic mechanism. In the methyl methacrylate–silica gel system both radical and anionic polymerization take place at the same time in formation of graft polymers and homopolymers. A reaction mechanism for the methyl methacrylate–silica gel system was proposed based on the results obtained to date.     

Initial stage in radiation polymerization of hydroxyethyl methacrylate-water system at low temperatures

The initial stage in the radiation polymerization of the hydroxyethyl methacrylate water system at low temperatures was studied. The polymerization was accelerated by the presence of water; the effect increased with rising temperature above T_g. The polymerization rate had a maximum near ?50°. The initiating and propagating radicals were identified by studies with ESR. Irradiated hydroxyethyl methacrylate at low temperatures gave a 7-line spectrum, which was assigned to the initiating radical having equivalent protons. This spectrum was changed to a 9-line spectrum at ?120 to ?100°; it was assigned to the propagating radical. The temperature dependence of the ESR spectrum of irradiated hydroxyethyl methacrylate-water systems was studied to examine the effect of water on the propagating radical.     

Radiation-Induced Solid-state Polymerization in Some Methacrylates

This paper presents a comparison of some of our results on the polymerization of methacrylic acid, octadecyl methacrylate, zinc methacrylate, and barium methacrylate monohydrate in the solid state. Polymerization was initiated by cobalt-60 γ rays, both in-source and post-irradiation polymerization techniques being used. Electron spin resonance studies showed that the polymerization proceeded by a free radical mechanism in all cases. The initial radicals formed by irradiation at low temperatures added a first monomer unit about 100° below the temperature of long-chain polymerization. Some radical decay occurred in the early stages of polymerization. The rate of polymerization increased rapidly, approaching the melting point or other phase change in the monomer.     

Studies of magnetic resonance phenomena in polymers. I. The effects of free volume and segmental mobility on the motion of nitroxide spin probes and labels in poly(methyl methacrylate)

Thin films of spin-probed and spin-labeled poly(methyl methacrylate) (PMMA) have been examined by electron spin resonance (ESR) at X-band frequency (9.2 GH_z) and at various temperatures. Direct spectral evidence is presented to indicate that the composite ESR spectra observed in a certain temperature range originate from two states of distinctly different mobility, one with slow motions corresponding to a glassy state and the other with fast motions corresponding to a liquidlike state. The coexistence of these two states at temperatures considerably below the glass transition temperature can be explained as a result of the effect of free volume in a solid polymeric glass.     

Cyclopolymerization. II. Mechanism of the free-radical polymerization of N-n-propyldimethacrylamide

The mechanism of cyclopolymerization was investigated by using N-n-propyldimethacrylamide (PDMA). Completely cyclized polymers were formed on polymerization of PDMA by a radical initiator. Moreover, those copolymers of PDMA and various monomers, such as styrene, methyl methacrylate, and vinyl acetate, obtained did not contain any detectable pendent double bonds. The kinetic investigation showed that the termination reaction proceeded between the cyclized radicals. The attempted polymerization of N-n-propyl-N-isobutyrylmethacrylamide, the monofunctional counterpart of PDMA, was failed. These results appear to confirm that cyclopolymerization of PDMA proceeds through a concerted mechanism which has been proposed for the mechanism of the cyclopolymerization of various difunctional monomers. Measurement of the ESR spectra of propagating radical has, however, revealed that the rate-determining step of the cyclopolymerization of PDMA is not intermolecular propagation but intramolecular cyclization, which indicates that the cyclization reaction proceeds in a stepwise way. This apparent contradiction was explained based upon thermodynamic considerations.     

Organometallic polymers. I. Synthesis of ferrocene-containing poly(phosphine oxides) and poly(phosphine sulfides)

Poly(phosphine oxides) and poly(phosphine sulfides) of ferrocene were synthesized in the melt phase. The resulting ferrocene polymers, linked by phosphorus bridges, were thermally stable and infusible solids, of low molecular weight (M?_n < 4000). Phenyldichlorophosphine, phenyldichlorophosphonate, and phenylphosphonothioic dichloride were copolymerized with ferrocene in the melt phase (80–110°C.) with ZnCl₂ as a catalyst. As the polymerization temperature was raised, cleavage of cyclopentadiene rings from iron became more pronounced, and cyclopentane-bridged polymers of ferrocene were produced in competition with the ferrocene–phosphorus polymers. The cleavage-polymerization process became predominant at 140°C. The structures of poly(phosphine oxides) (and sulfides) of ferrocene were verified by infrared and nuclear magnetic resonance spectroscopy.     

In situ electron spin resonance study of styrene grafting of electron irradiated fluoropolymer films for fuel cell membranes

Three different electron beam irradiated fluoropolymers (ETFE, FEP, and PVDF) as well as their grafting reactions with styrene in different diluents were investigated by means of electron spin resonance (ESR). Depending on the atmosphere during irradiation, ESR spectra of peroxy and alkyl radicals were observed. Radical decay as a function of time and temperature was investigated in the presence and absence of solvent. Grafting levels and number of monomer units per chain were calculated for both types of radicals. Irradiation atmosphere, grafting temperature, and added solvent affect the morphology of the fluoropolymers, in particular the crystalline versus amorphous fractions and their swelling. They thus influence the rate at which the initial radicals at the polymer backbone are reached during the grafting process. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3323–3336, 2006     

ESR study on radical polymerization and its application to microemulsion systems

Well-resolved electron spin resonance (ESR) spectra of propagating radicals of vinyl and diene compounds were observed in a single scan by a conventional CW-ESR spectrometry without the aid of computer accumulation and the specially designed cavity and cells. Although solvents which could be used for ESR measurements were restricted to nonpolar solvents, such as benzene, toluene, and hexane, new information on dynamic behavior and reactivity of the propagating radicals in the radical polymerization of vinyl and diene compounds were obtained. Thus, values of propagation rate constants (k_p) for vinyl and diene compounds were determined by an ESR method. Some of the k_p values were in a fair agreement with those obtained by a pulsed laser polymerization (PLP) method. Furthermore, polymer chain effect on apparent k_p was clearly observed in the radical polymerization of macromonomers and in the microemulsion polymerization. In ESR measurement on inclusion polymerization system, important information on the origin of the 9-line spectrum observed in the radical polymerization of methacrylate propagating radicals was obtained.     

聚甲基丙烯酸-对-甲氧基偶氮苯烷氧基酯的合成及柔性间隔基对液晶行为的影响

通过甲基丙烯酸钾盐与溴化物的反应合成了一系列柔性间隔基长度不同的甲基丙烯酸 对 甲氧基偶氮苯烷氧基酯（ＰＭＡＡＺＯｎ,ｎ＝２,３,４,５,６）,然后聚合成相应的聚合物．用１Ｈ ＮＭＲ和ＩＲ表征了聚合物的结构,ＧＰＣ测定了分子量,ＤＳＣ和偏光显微镜观测了液晶高分子的相行为和织构．研究了间隔基长度对织构、相变和热力学性质的影响,观测到聚合物的ＴＮＩ随间隔基的长度变化表现出的奇偶效应．     

Studying the Fundamentals of Radical Polymerization Using ESR in Combination with Controlled Radical Polymerization Methods

Electron spin resonance (ESR) spectroscopy can contribute to understanding both the kinetics and mechanism of radical polymerizations. A series of oligo/poly(meth)acrylates were prepared by atom transfer radical polymerization (ATRP) and purified to provide well defined radical precursors. Model radicals, with given chain lengths, were generated by reaction of the terminal halogens with an organotin compound and the radicals were observed by ESR spectroscopy. This combination of ESR with ATRPs ability to prepare well defined radical precursors provided significant new information on the properties of radicals in radical polymerizations. ESR spectra of the model radicals generated from tert-butyl methacrylate precursors, with various chain lengths, showed clear chain length dependent changes and a possibility of differentiating between the chain lengths of observed propagating radicals by ESR. The ESR spectrum of each dimeric, trimeric, tetrameric, and pentameric tert-butyl acrylate model radicals, observed at various temperatures, provided clear experimental evidence of a 1,5-hydrogen shift.     

Polymerization of coordinated monomers. V. Polymerization of methyl methacrylate–Lewis acid complexes

The polymerization of the complex of methyl methacrylate with stannic chloride, aluminum trichloride, or boron trifluoride was carried out in toluene solution at several temperatures in the range of 60° to ?78°C by initiation of α,α′-azobisisobutyronicrile or by irradiation with ultraviolet rays. The tacticities of the resulting polymers were determined by NMR spectroscopy. Both the 1:1 and the 2:1 methyl methacrylate–SnCl₄ complexes gave polymers with similar tacticities at the polymerization temperatures above ?60°C. With decreasing temperature below ?60°C, the isotacticity was more favored for the 2:1 complex, whereas the tacticities did not change for the 1:1 complex. On the ESR spectroscopy of the polymerization solution under the irradiation of ultraviolet rays at ?120°C, the 1:1 SnCl₄ complex gave a quintet, while the 2:1 SnCl₄ complex gave both a quintet and a sextet. The sextet became weaker with increasing temperature and disappeared at ?60°C. This behavior of the sextet corresponds to the change of the tacticities of polymer for the 2:1 SnCl₄ complex. An intra–intercomplex addition was suggested for the polymerization of the 2:1 complex, which took a cis-configuration on the basis of its infrared spectra. The sextet can be ascribed to the radical formed by the intracomplex addition reaction, while the quintet can correspond to that formed by the intercomplex addition reaction. The proportion of the intracomplex reaction was estimated to be about 0.25 at ?75°C, and the calculated value of the probability of isotactic diad addition of the intracomplex reaction was found to be almost unity.     

Polymerization of coordinated monomers. I. Stereoregulation in the free-radical polymerization of methyl methacrylate-zinc chloride or methyl methacrylate–stannic chloride complexes

Stereoregulation in free-radical polymerization was studied for the polymerization of the 2:1 or 1:1 complex of methyl methacrylate with ZnCl₂ or SnCl₄. The complexes were polymerized with the use of a free-radical initiator or γ-ray irradiation either in the liquid or solid state at various temperatures ranging from ?196 to 110°C, and the tacticities of the resulting polymers were determined by NMR spectroscopy. The polymers had different and characteristic values of tacticities depending upon the complex species, i.e., the kind of metal chloride and the stoichiometry. The tacticities were found to be independent of the polymerization temperature in both the liquid and solid states, in contrast with the fact that tacticities of the polymer from pure monomer changed markedly with the temperature. A temperature dependence appeared in the polymerization system, which contained more monomer than that corresponding to the 2:1 complex. The effect of the viscosity or the solid phase on the stereoregulation was examined in comparison with the polymerization of a mixture of methyl methacrylate and liquid paraffin. Two possible explanations regarding the stereoregulation mechanism are offered in relation to the structures of the complexes.     

The interaction of poly(methacrylate) radicals with diphenyldiacetylenes

The free radical polymerization of methyl methacrylate (MMA) in the presence of p,p′- disubstituted diphenylbutadiynes was studied. Both the rate and degree of polymerization are somewhat lowered by the presence of the diynes, but the propagating radicals were stabilized giving clear ESR signals of the interacted polyMMA radicals at the polymerization temperature of 70°C. The magnitude of the interaction depended on the electron density of the diynes; in the cases of diphenylbutadiyne and dimethoxycarbonyldiphenylbutadiyne, the intoraction was more enhanced showing ESR signals with smaller spectra widths and increasing the number of radicals with the polymerization time, while in the cases of electron donor-substituted diynes the interaction was weaker and the radical concentration remained constant during the polymerization. These systems are considered to be examples of the stabilization of transient radicals by the direct interaction of radicals with additives without formation or breaking of chemical bonds. No diacetylenic group was found in the polyMMA obtained. © 1994 John Wiley & Sons, Inc.     

ESR studies on radical polymerization of vinyl ethers

ESR studies on the radical polymerization of vinyl ethers were performed from ?50°C to room temperature using di-tert-butylperoxide as a photoinitiator. Well resolved ESR spectra were assigned to propagating radicals of vinyl ethers. Their hyperfine splitting constants due to α-proton were about 16 G, being smaller than those of ethyl acrylate and vinyl acetate. The smaller constants is ascribed to a deviation of the propagating radicals from sp² hybrid structure. The reason why high polymers are not obtained from vinyl ethers by radical polymerization is discussed on the basis of information from the ESR studies.