Adsorption of arsenic(III) into modified lamellar Na-magadiite in aqueous medium—Thermodynamic of adsorption process

Synthetic Na-magadiite sample was used for organofunctionalization process with N-propyldiethylenetrimethoxysilane and bis[3-(triethoxysilyl)propyl]tetrasulfide, after expanding the interlayer distance with polar organic solvents such as dimethylsulfoxide (DMSO). The resulted materials were submitted to process of adsorption with arsenic solution at pH 2.0 and 298±1 K. The adsorption isotherms were adjusted using a modified Langmuir equation with regression nonlinear; the net thermal effects obtained from calorimetric titration measurements were adjusted to a modified Langmuir equation. The adsorption process was exothermic (Δ_intH=−4.15-5.98 kJ mol⁻¹) accompanied by increase in entropy (Δ_intS=41.32-62.20 J k⁻¹ mol⁻¹) and Gibbs energy (Δ_intG=−22.44−24.56 kJ mol⁻¹). The favorable values corroborate with the arsenic (III)/basic reactive centers interaction at the solid-liquid interface in the spontaneous process.     

Kinetics and mechanism of hydroboration reactions of HBBr2 · SMe2 and HBCl2 · SMe2 - Application of B NMR spectroscopy

The kinetics and mechanism of the hydroboration reactions of 1-octene with HBBr₂ · SMe₂ and HBCl₂ · SMe₂, in CH₂Cl₂ as a solvent, were studied. Rates of hydroboration were monitored using ¹¹B NMR spectroscopy. The reactions exhibited simple second-order kinetics of the form . The HBCl₂ · SMe₂ was found to be 20 times more reactive than the HBBr₂ · SMe₂. The overall activation parameters (ΔH^≠, ΔS^≠) for the reaction of HBBr₂ · SMe₂ with 1-octene were found to be 82 ± 1 kJ mol⁻¹, −18 ± 4 J K⁻¹ mol⁻¹ and with 1-hexyne were 78 ± 4 kJ mol⁻¹ −34 ± 12 J K⁻¹ mol⁻¹. For the reaction of HBCl₂ · SMe₂ with 1-octene, ΔH^≠ and ΔS^≠ were 104 ± 5 kJ mol⁻¹ and 43 ± 16 J K⁻¹ mol⁻¹, respectively. The activation parameters (ΔH^≠, ΔS^≠) for the dissociation of Me₂S from HBBr₂ · SMe₂ were found to be 104 ± 2 kJ mol⁻¹, +33 ± 8 J K⁻¹ mol⁻¹, respectively. Based on the activation parameters, it was concluded that the detaching of Me₂S from the boron centre follows a dissociative mechanism, while the hydroboration process follows an associative pathway. It was also concluded that the dissociation of Me₂S from the boron centre is the rate determining step.     

Heat capacity and thermodynamic functions of LuPO4 in the range 0-320 K

The heat capacity of LuPO₄ was measured in the temperature range 6.51-318.03 K. Smoothed experimental values of the heat capacity were used to calculate the entropy, enthalpy and Gibbs free energy from 0 to 320 K. Under standard conditions these thermodynamic values are: (298.15 K) = 100.0 ± 0.1 J K⁻¹ mol⁻¹, S⁰(298.15 K) = 99.74 ± 0.32 J K⁻¹ mol⁻¹, H⁰(298.15 K) − H⁰(0) = 16.43 ± 0.02 kJ mol⁻¹, −[G⁰(298.15 K) − H⁰(0)]/T = 44.62 ± 0.33 J K⁻¹ mol⁻¹. The standard Gibbs free energy of formation of LuPO₄ from elements Δ_fG⁰(298.15 K) = −1835.4 ± 4.2 kJ mol⁻¹ was calculated based on obtained and literature data.     

Sorptive potential of sunflower stem for Cr(III) ions from aqueous solutions and its kinetic and thermodynamic profile

The sorptive potential of sunflower stem (180-300 μm) for Cr(III) ions has been investigated in detail. The maximum sorption (≥85%) of Cr(III) ions (70.2 μM) has been accomplished using 30 mg of high density sunflower stem in 10 min from 0.001 M nitric and 0.0001 M hydrochloric acid solutions. The accumulation of Cr(III) ions on the sorbent follows Dubinin-Radushkevich (D-R), Freundlich and Langmuir isotherms. The isotherm yields D-R saturation capacity X_m = 1.60 ± 0.23 mmol g⁻¹, β = −0.00654 ± 0.00017 kJ² mol⁻², mean free energy E = 8.74 ± 0.12 kJ mol⁻¹, Freundlich sorption capacity K_F = 0.24 ± 0.11 mol g⁻¹, 1/n = 0.90 ± 0.04 and of Langmuir constant K_L = 6800 ± 600 dm³ mol⁻¹ and C_m = 120 ± 18 μmol g⁻¹. The variation of sorption with temperature (283-323 K) gives ΔH = −23.3 ± 0.8 kJ mol⁻¹, ΔS = −64.0 ± 2.7 J mol⁻¹ K⁻¹ and ΔG_298k = −4.04 ± 0.09 kJ mol⁻¹. The negative enthalpy and free energy envisage exothermic and spontaneous nature of sorption, respectively. Bisulphate, Fe(III), molybdate, citrate, Fe(II), Y(III) suppress the sorption significantly. The selectivity studies indicate that Cr(III), Eu(III) and Tb(III) ions can be separated from Tc(VII) and I(I). Sunflower stem can be used for the preconcentration and removal of Cr(III) ions from aqueous medium. This cheaper and novel sorbent has potential applications in analytical and environmental chemistry, in water decontamination, industrial waste treatment and in pollution abatement. A possible mechanism of biosorption of Cr(III) ions onto the sunflower stem has been proposed.     

Study of the in vitro degradation of poly(ethyl glyoxylate)

In vitro degradation of poly(ethyl glyoxylate) (PEtG), a functionalised polyacetal, was investigated. First, the thermodynamic polymerization parameters and the ceiling temperature (T_c) were determined (ΔH_p = 28 ± 3 kJ mol⁻¹, ΔS_p = 98 ± 7 J mol⁻¹ K⁻¹, T_c = 310 ± 4 K). Secondly, PEtG hydrolysis was investigated using potentiometry, weight loss measurements, SEC and ¹H NMR. The results show that PEtG is stable for at least 7 days in aqueous media. Then degradation occurs and releases ethanol and glyoxylic acid hydrate as final products. A scheme for the degradation mechanism involving chain scission and ester hydrolysis is proposed.     

Heat-capacity measurements and thermodynamic functions of crystalline adenine; revised thermodynamic properties of aqueous adenine

The standard molar heat capacity C^°_p,m of adenine(cr) has been measured using adiabatic calorimetry over the range 6<(T/K)<310 and the results used to derive thermodynamic functions for adenine(cr) at smoothed temperatures. At T=298.15 K, C^°_p,m=(142.67±0.29) J · K⁻¹ · mol⁻¹ and the third law entropy S^°_m=(145.62±0.29) J · K⁻¹ · mol⁻¹. The standard molar Gibbs free energy of formation Δ_fG^°_m at T=298.15 K for crystalline adenine was calculated, using the standard molar enthalpy of formation for the compound and entropies of the elements from the literature, and found to be Δ_fG^°_m=(301.4±1.0) kJ · mol⁻¹. The results were combined with solution calorimetry and solubility measurements from the literature to yield revised values for the standard molar thermodynamic properties of aqueous adenine at T=298.15 K: Δ_fG^°_m=(313.4±1.0) kJ · mol⁻¹, Δ_fH^°_m=(129.5±1.4) kJ · mol⁻¹, and S_m^°=(217.68±0.44) J · K⁻¹ · mol⁻¹.     

Low-temperature heat capacity and thermodynamic properties of crystalline carboxin (C12H13NO2S)

Carboxin was synthesized and its heat capacities were measured with an automated adiabatic calorimeter over the temperature range from 79 to 380 K. The melting point, molar enthalpy (Δ_fusH_m) and entropy (Δ_fusS_m) of fusion of this compound were determined to be 365.29±0.06 K, 28.193±0.09 kJ mol⁻¹ and 77.180±0.02 J mol⁻¹ K⁻¹, respectively. The purity of the compound was determined to be 99.55 mol% by using the fractional melting technique. The thermodynamic functions relative to the reference temperature (298.15 K) were calculated based on the heat capacity measurements in the temperature range between 80 and 360 K. The thermal stability of the compound was further investigated by differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis. The DSC curve indicates that the sample starts to decompose at ca. 290 °C with the peak temperature at 292.7 °C. The TG-DTG results demonstrate the maximum mass loss rate occurs at 293 °C corresponding to the maximum decomposition rate.     

Synthesis, crystal structure and thermochemical behaviour of a barium complex [Ba(5-OH-BDC)(H2O)3] [5-OH-H2BDC = 5-hydroxyisophtalic acid]

A novel complex [Ba(5-OH-BDC)(H₂O)₃] [5-OH-H₂BDC = 5-hydroxyisophtalic acid] was synthesized and characterized by X-ray crystallography. The complex is Monoclinic P2₁/c, a = 11.1069(4), b = 14.8192(6), c = 6.5005(2) Å, β = 103.465(3)° and Z = 4, which exhibits a three-dimensional framework formed by linkage of adjacent two-dimensional (6, 3) layers via intermolecular hydrogen bonds. The title complex has been studied by IR spectrum and TG-DTG. The constant-volume combustion energy of the complex, Δ_cU, was determined as being (−3210.45 ± 1.41) kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. The standard enthalpy of combustion, , and the standard enthalpy of formation, , were calculated as being (−3207.97 ± 1.41) and (−1922.80 ± 1.76) kJ mol⁻¹, respectively. A calculation model for determining the specific heat capacity of the complex with an improved RD496-III microcalorimeter is also derived. The specific heat capacity of the complex was (6158.387 ± 0.187) J mol⁻¹ K⁻¹.     

Anchored thiol smectite clay—kinetic and thermodynamic studies of divalent copper and cobalt adsorption

A natural smectite clay sample from Serra de Maicuru, Pará State, Brazil, had aluminum and zirconium polyoxycations inserted within the interlayer space. The precursor and pillarized smectites were organofunctionalized with the silyating agent 3-mercaptopropyltrimethoxysilane. The basal spacing of 1.47 nm for natural clay increased to 2.58 and 2.63 nm, for pillared aluminum, S_Al/SH, and zirconium, S_Zr/SH, and increases in the surface area from 44 to 583 and 585 m² g⁻¹, respectively. These chemically immobilized clay samples adsorb divalent copper and cobalt cations from aqueous solutions of pH 5.0 at 298±1 K. The Langmuir, Redlich-Peterson and Toth adsorption isotherm models have been applied to fit the experimental data with a nonlinear approach. From the cation/basic center interactions for each smectite at the solid-liquid interface, by using van’t Hoff methodology, the equilibrium constant and exothermic thermal effects were calculated. By considering the net interactive number of moles for each cation and the equilibrium constant, the enthalpy, Δ_intH⁰ (−9.2±0.2 to −10.2±0.2 kJ mol⁻¹) and negative Gibbs free energy, Δ_intG⁰ (−23.9±0.1 to −28.7±0.1 kJ mol⁻¹) were calculated. These values enabled the positive entropy, Δ_intS⁰ (51.3±0.3 to 55.0±0.3 JK⁻¹ mol⁻¹) determination. The cation-sulfur interactive process is spontaneous in nature, reflecting the favorable enthalpic and entropic results. The kinetics of adsorption demonstrated that the fit is in agreement with a second-order model reaction with rate constant k₂, varying from 4.8×10⁻² to 15.0×10⁻² and 3.9×10⁻² to 12.2×10⁻² mmol⁻¹ min⁻¹ for copper and cobalt, respectively.     

Isothermal and polythermal kinetics of depolymerization of C60 polymers

Isothermal depolymerization of the two polymers of C₆₀, i.e. of 1D orthorhombic phase (O) and of “dimer state” (DS) have been studied by means of Infra-red spectroscopy in the temperature ranges 383-423 and 453-503 K, respectively. Differential Scanning Calorimetry (DSC) has been used to obtained depolymerization polytherms for O-phase and DS. Standard set of reaction models have been applied to describe depolymerization behavior of O-phase and DS. The choice of the reaction models was based primarily on the isotherms. Several models however demonstrated almost equal goodness of fit and were statistically indistinguishable. In this case we looked for simpler/more realistic mechanistic model of the reaction. For DS the first-order expression (Mampel equation) with the activation energy E_a = 134 ± 7 kJ mol⁻¹ and preexponential factor ln(A/s⁻¹) = 30.6 ± 2.1, fitted the isothermal data. This activation energy was nearly the same as the activation energy of the solid-state reaction of dimerization of C₆₀ reported in the literature. This made the enthalpy of depolymerization close to zero in accord with the DSC data on depolymerization of DS. Mampel equation gave the best fit to the polythermal data with E_a = 153 kJ mol⁻¹ and preexponential factor ln(A/s⁻¹) = 35.8. For O-phase two reasonable reaction models, i.e. Mampel equation and “contracting spheres” model equally fitted to the isothermal data with E_a = 196 ± 2 and 194 ± 8 kJ mol⁻¹, respectively and ln(A/s⁻¹) = 39.1 ± 0.5 and 37.4 ± 0.2, respectively and to polythermal data with E_a = 163 and 170 kJ mol⁻¹, respectively and ln(A/s⁻¹) = 32.5 and 29.5, respectively.     

Reactivity studies of trans-[PtClMe(SMe2)2] towards anionic and neutral ligand substitution processes

Reaction of trans-[PtClMe(SMe₂)₂] with the mono anionic ligands azide, bromide, cyanide, iodide and thiocyanate result in substitution of the chloro ligand as the first step. In contrast the neutral ligands pyridine, 4-Me-pyridine and thiourea substitute a SMe₂ ligand in the first step as confirmed by ¹H NMR spectroscopy and the kinetic data. Detailed kinetic studies were performed in methanol as solvent by use of conventional stopped-flow spectrophotometry. All processes follow the usual two-term rate law for square-planar substitutions, k_obs = k₁ + k₂[Y] (where k₁ = k_MeOH[MeOH]), with k₁ = 0.088 ± 0.004 s⁻¹ and k₂ = 1.18 ± 0.13, 3.8 ± 0.3, 17.8 ± 1.3, 34.9 ± 1.4, 75.3 ± 1.1 mol⁻¹ dm³ s⁻¹ for Y⁻ = N₃, Br, CN, I and SCN respectively at 298 K. The reactions with the neutral ligands proceed without an appreciable intercept with k₂ = 5.1 ± 0.3, 15.3 ± 1.8 and 195 ± 3 mol⁻¹ dm³ s⁻¹ for Y = pyridine, 4-Me-pyridine and thiourea, respectively, at 298 K. Activation parameters for MeOH, , Br⁻, CN⁻, I⁻, SCN⁻, and Tu are ΔH^≠ = 47.1 ± 1.6, 49.8 ± 0.6, 39 ± 3, 32 ± 8, 39 ± 5, 34 ± 4 and 31 ± 3 kJ mol⁻¹ and ΔS^≠ = −107 ± 5, −77 ± 2, −104 ± 9,−113 ± 28, −85 ± 18, −94 ± 14 and −97 ± 10 J K⁻¹ mol⁻¹, respectively. Recalculation of k₁ to second-order units gives the following sequence of nucleophilicity: (1:13:42:57:170:200:390:840:2170) at 298 K. Variation of the leaving group in the reaction between trans-[PtXMe(SMe₂)₂] and SCN⁻ follows the same rate law as stated above with k₂ = 75.3 ± 1.1, 236 ± 4 and 442 ± 5 mol⁻¹ dm³ s⁻¹ for X⁻ = Cl, I and N₃, respectively, at 298 K. The corresponding activation parameters were determined as ΔH^≠ = 34 ± 4, 32 ± 2 and 39.3 ± 1.7 kJ mol⁻¹ and ΔS^≠ = −94 ± 14, −86 ± 8 and −68 ± 6 J K⁻¹ mol⁻¹. All the kinetic measurements indicate the usual associate mode of activation for square planar substitution reactions as supported by large negative entropies of activation, a significant dependence of the reaction rate on different entering nucleophiles and a linear free energy relationship.     

Energetics of cobalt phosphate frameworks: α, β, and red NaCoPO4

Thermal behavior, relative stability, and enthalpy of formation of α (pink phase), β (blue phase), and red NaCoPO₄ are studied by differential scanning calorimetry, X-ray diffraction, and high-temperature oxide melt drop solution calorimetry. Red NaCoPO₄ with cobalt in trigonal bipyramidal coordination is metastable, irreversibly changing to α NaCoPO₄ at 827 K with an enthalpy of phase transition of −17.4±6.9 kJ mol⁻¹. α NaCoPO₄ with cobalt in octahedral coordination is the most stable phase at room temperature. It undergoes a reversible phase transition to the β phase (cobalt in tetrahedra) at 1006 K with an enthalpy of phase transition of 17.6±1.3 kJ mol⁻¹. Enthalpy of formation from oxides of α, β, and red NaCoPO₄ are −349.7±2.3, −332.1±2.5, and −332.3±7.2 kJ mol⁻¹; standard enthalpy of formation of α, β, and red NaCoPO₄ are −1547.5±2.7, −1529.9±2.8, and −1530.0±7.3 kJ mol⁻¹, respectively. The more exothermic enthalpy of formation from oxides of β NaCoPO₄ compared to a structurally related aluminosilicate, NaAlSiO₄ nepheline, results from the stronger acid-base interaction of oxides in β NaCoPO₄ (Na₂O, CoO, P₂O₅) than in NaAlSiO₄ nepheline (Na₂O, Al₂O₃, SiO₂).     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

Calorimetric determination of enthalpy changes for the proton ionization of glycine, N,N-bis(2-hyroxyethyl)glycine (“bicine”) and N-tris(hydroxymethyl)methylglycine (“tricine”) in water-methanol mixtures

Enthalpies for the two proton ionizations of glycine, N,N-bis(2-hyroxyethyl)glycine (“bicine”) and N-tris(hydroxymethyl)methylglycine (“tricine”) were obtained in water-methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. With increasing methanol the ionization enthalpy for the first proton (ΔH₁) of glycine increased from 4.4 to 9.4 kJ mol⁻¹ with a minimum of 4.1 kJ mol⁻¹ at X_m = 0.059. The ionization enthalpy of the second proton (ΔH₂) for glycine decreased from 46.3 to 38.1 kJ mol⁻¹. ΔH₁ of bicine increased from 3.5 to 7.6 kJ mol⁻¹ at X_m = 0.273 before dropping to 4.1 kJ mol⁻¹ at X_m = 0.360. ΔH₂ of bicine increased from 24.9 to 29.4 kJ mol⁻¹. For tricine, ΔH₁ increased from 6.7 to 9.8 kJ mol⁻¹ at X_m = 0.194 then dropped to 7.4 kJ mol⁻¹ at X_m = 0.360. ΔH₂ for tricine first dropped from 30.8 to 28.5 kJ mol⁻¹ at X_m = 0.059 before increasing to 33.3 kJ mol⁻¹ at X_m = 0.273. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent-solvent and solvent-solute interactions.     

Calorimetric determination of enthalpy changes for proton ionization of N-[2-hydroxyethyl]piperazine-N′-[2-ethane sulfonic acid] (HEPES) and N-[2-hydroxyethyl]piperazine-N′-[2-hydroxypropane sulfonic acid] (HEPPSO) in water-methanol mixtures

Enthalpies for the two proton ionizations of the biochemical buffers N-[2-hydroxyethyl]piperazine-N′-[2-ethane sulfonic acid] (HEPES) and N-[2-hydroxyethyl]piperazine-N′-[2-hydroxypropane sulfonic acid] (HEPPSO) were obtained in water-methanol mixtures with methanol mole fraction (X_m) from 0 to 0.360. With increasing methanol, the ionization enthalpy for the first proton (ΔH₁) of HEPES increased steadily from 8.4 to 15.3 kJ mol⁻¹ whereas that for HEPPSO rose to a maximum of 21.0 kJ mol⁻¹ at X_m = 0.123 before dropping to 18.4 kJ mol⁻¹ at X_m = 0.360. The ionization enthalpy for the second proton (ΔH₂) of HEPES varied from 20.8 kJ mol⁻¹ in water to 13.6 kJ mol⁻¹ at X_m = 0.360 with a maximum of 24.8 kJ mol⁻¹ at X_m = 0.194. For HEPPSO, ΔH₂ increased steadily from 23.4 to 29.2 kJ mol⁻¹. The solvent composition was selected so as to include the region of maximum structure enhancement of water by methanol. The results were interpreted in terms of solvent-solvent and solvent-solute interactions.     

The enthalpies of formation of XeF6(c), XeF4(c), XeF2(c), and PF3(g)

The energies of reaction of XeF₆(c), XeF₄(c), and XeF₂(c) with PF₃(g) were measured in a bomb calorimeter. These results were combined with the enthalpy of fluorination of PF₃(g), which was redetermined to be −(151.98 ± 0.07) kcal_th mol⁻¹, to derive (at 298.15 K) ΔH_f^o(XeF₆, c, I) = −(80.82 ± 0.53) kcal_th mol⁻¹, ΔH_f^o(XeF₄, c) = −(63.84 ± 0.21) kcal_th mol⁻¹, and ΔH_f^o(XeF₂, c) = −(38.90 ± 0.21) kcal_th mol⁻¹. The enthalpies of formation of the solid xenon fluorides were combined with reported enthalpies of sublimation to derive (at 298.15 K) ΔH_f^o(XeF₆, g) = −(66.69 ± 0.61) kcal_th mol⁻¹, ΔH_f^o(XeF₄, g) = −(49.28 ± 0.22) kcal_th mol⁻¹, and ΔH_f^o(XeF₂, g) = −(25.58 ± 0.21) kcal_th mol⁻¹. The average bond dissociation enthalpies,〈D^o〉(XeF, 298.15 K), are (29.94 ± 0.16), (31.15 ± 0.13), and (31.62 ± 0.16) kcal_th mol⁻¹ in XeF₆(g), XeF₄(g), and XeF₂(g), respectively. The enthalpy of formation of PF₃(g) was determined to be −(228.8 ± 0.3) kcal_th mol⁻¹.     

Enthalpy change and mechanism of oxidation of o-phenylenediamine by hydrogen peroxide catalyzed by horseradish peroxidase

The hydrogen peroxide-oxidation of o-phenylenediamine (OPD) catalyzed by horseradish peroxidase (HRP) at 37 °C in 50 mM phosphate buffer (pH 7.0) was studied by calorimetry. The apparent molar reaction enthalpy with respect to OPD and hydrogen peroxide were −447 ± 8 kJ mol⁻¹ and −298 ± 9 kJ mol⁻¹, respectively. Oxidation of OPD by H₂O₂ catalyzed by HRP (1.25 nM) at pH 7.0 and 37 °C follows a ping-pong mechanism. The maximum rate V_max (0.91 ± 0.05 μM s⁻¹), Michaelis constant for OPD K_m,S (51 ± 3 μM), Michaelis constant for hydrogen peroxide Km,H₂O₂ (136 ± 8 μM), the catalytic constant k_cat (364 ± 18 s⁻¹) and the second-order rate constants k₊₁ = (2.7 ± 0.3) × 10⁶ M⁻¹ s⁻¹ and k₊₅ = (7.1 ± 0.8) × 10⁶ M⁻¹ s⁻¹ were obtained by the initial rate method.     

Thermodynamic properties of BaCeO3 and BaZrO3 at low temperatures

Specific heat capacities (C_p) of polycrystalline samples of BaCeO₃ and BaZrO₃ have been measured from about 1.6 K up to room temperature by means of adiabatic calorimetry. We provide corrected experimental data for the heat capacity of BaCeO₃ in the range T < 10 K and, for the first time, contribute experimental data below 53 K for BaZrO₃. Applying Debye's T³-law for T → 0 K, thermodynamic functions as molar entropy and enthalpy are derived by integration. We obtain C_p = 114.8 (±1.0) J mol⁻¹ K⁻¹, S° = 145.8 (±0.7) J mol⁻¹ K⁻¹ for BaCeO₃ and C_p = 107.0 (±1.0) J mol⁻¹ K⁻¹, S° = 125.5 (±0.6) J mol⁻¹ K⁻¹ for BaZrO₃ at 298.15 K. These results are in overall agreement with previously reported studies but slightly deviating, in both cases. Evaluations of C_p(T) yield Debye temperatures and identify deviations from the simple Debye-theory due to extra vibrational modes as well as anharmonicity. The anharmonicity turns out to be more pronounced at elevated temperatures for BaCeO₃. The characteristic Debye temperatures determined at T = 0 K are Θ₀ = 365 (±6) K for BaCeO₃ and Θ₀ = 402 (±9) K for BaZrO₃.     

Determination of carbaryl and carbofuran in fruits and tap water by β-cyclodextrin enhanced fluorimetric method

The effect of β-cyclodextrin (CD) and hydroxypropyl-β-cyclodextrin (HPCD) in water solutions on the UV-Vis and fluorescence spectra of carbaryl (1-naphthyl-N-methylcarbamate, CY) and carbofuran (2,2-dimethyl,2-3-dihydro-7-benzofuranyl-N-methylcarbamate, CF) was investigated. Host-guest interactions were observed by UV-Vis and spectrofluorimetry and the association constants for the 1:1 complexes (K_A, mol⁻¹ dm³) with CD and HPCD were determined. The values obtained were 190±10 and 123±7 mol⁻¹ dm³ for CF and 350±50 and 644±53 mol⁻¹ dm³ for CY, respectively. The values of the fluorescence quantum yield ratios (φ_complexed/φ_free) were 1.24±0.01 with CD and 1.310±0.007 with HPCD for CY, but much higher for CF being 7.0±0.1 with CD and 9.3±0.4 with HPCD. The limits of detection (LOD) for the fluorimetric determination under the better conditions were 14.5 ng cm⁻³ for the complex CF:CD and 1.94 ng cm⁻³ for the complex CY:CD in water, with notable improvement specially in the case of CF. We observed higher analytical sensitivity with the cyclodextrins (CDs) in presence of alcohols but not better LOD. The method is rapid, simple, direct and sensitive and the recovery of CY and CF was found to be between 100 and 112% in fruits and 97 and 109% in tap water. The allowed level of carbamates in banana can be detected by the proposed method.     

Change in mechanistic pathway of hydroboration: A detailed kinetic study of H2BBr·SMe2 and HBBr2·SMe2

Hydroboration reactions of 1-octene and 1-hexyne with H₂BBr·SMe₂ in CH₂Cl₂ were studied as a function of concentration and temperature, using ¹¹B NMR spectroscopy. The reactions exhibited saturation kinetics. The rate of dissociation of dimethyl sulfide from boron at 25 °C was found to be (7.36 ± 0.59 and 7.32 ± 0.90) × 10⁻³ s⁻¹ for 1-octene and 1-hexyne, respectively. The second order rate constants, k₂, for hydroboration worked out to be 7.00 ± 0.81 M s⁻¹ and 7.03 ± 0.70 M s⁻¹, while the overall composite second order rate constants, k K, were (3.30 ± 0.43 and 3.10 ± 0.37) × 10⁻² M s⁻¹, respectively at 25 °C. The entropy and enthalpy values were found to be large and positive for k₁, whilst for k₂ these were large and negative, with small values for enthalpies. This is indicative of a limiting dissociative (D) for the dissociation of Me₂S and associative mechanism (A) for the hydroboration process. The overall activation parameters, ΔH^≠ and ΔS^≠, were found to be 98 ± 2 kJ mol⁻¹ and +56 ± 7 J K⁻¹ mol⁻¹ for 1-octene whilst, in the case of 1-hexyne these were found out to be 117 ± 7 kJ mol⁻¹ and +119 ± 24 J K⁻¹ mol⁻¹, respectively. When comparing the kinetic data between H₂BBr·SMe₂ and HBBr₂·SMe₂, the results showed that the rate of dissociation of Me₂S from H₂BBr·SMe₂ is on average 34 times faster than it is in the case of HBBr₂·SMe₂. Similarly, the rate of hydroboration with H₂BBr·SMe₂ was found to be on average 11 times faster than it is with HBBr₂·SMe₂. It is also clear that by replacing a hydrogen substituent with a bromine atom in the case of H₂BBr·SMe₂ the mechanism for the overall process changes from limiting dissociative (D) to interchange associative (I_a).