反式双氧锰(V)咔咯配合物的稳定性

采用密度泛函理论(DFT)的B3LYP方法对反式双氧锰(V)咔咯配合物阴离子的稳定性及其质子化物种进行了理论计算. 结果表明: 反式双氧锰(V)咔咯配合物阴离子构型稳定, 其反式双氧锰键O=Mn=O由锰原子的d轨道与两个氧原子的p轨道分别构成一个σ轨道和两个π轨道; 随着外围取代基吸电性增强, O=Mn=O键长缩短, 拉曼伸缩振动频率增大; 其质子化过程中得到两个质子的轴向氧原子与锰原子的距离超出正常化学键的范围, 从而形成水分子并脱离原来分子, 导致质子化行为是不可逆过程, 而形成单氧的咔咯锰(V)-氧配合物.     

DFT survey of monoboron and diboron corroles: regio- and stereochemical preferences for a constrained, low-symmetry macrocycle

The structures of a number of mono- and diboron corrole complexes have been optimized using DFT methods in order to establish regio- and stereochemical preferences for bonding of one or two boron atoms to the corrole macrocycle. The formulations of the complexes were suggested either from preliminary experimental results (to be reported elsewhere) or by analogy with related diboron porphyrin compounds. The computational results suggest for the monoboron corroles BF(2)(H(2)corrole) and BPhH(H(2)corrole) that the regioisomer in which the boron is bound to a dipyrromethene site adjacent to the bipyrrole is preferred over the other possible regioisomers in which boron coordinates either in the bipyrrole or in the dipyrromethene site opposite the bipyrrole. In the N-substituted corrole complexes there are only two possiblities and, for each complex, the regioisomer with boron in the dipyrromethene site adjacent to the bipyrrole is lower in energy. For all four monoboron complexes the stereoisomers in which boron and both its substituents are displaced out of the mean N(4) plane are more stable than the boron in-plane stereoisomers. These regio- and stereochemical preferences are rationalised by an analysis of the deformations to the corrole macrocycle and the geometry at the boron atoms. The lowest energy structures in all cases correspond to the least strained configurations. In addition, all four complexes show significant BFHN hydrogen bonding and BHHN dihydrogen bonding interactions, which are maximised in the lowest energy configurations for each structure, indicating that these are important additional stabilising interactions. Three different regioisomers, each with cisoid or transoid stereochemistry were optimised for the diboron complex PhBOB(corrole) which contains a bridging BOB group. The dipyrromethene/dipyrromethene isomer is more stable than either of the dipyrromethene/bipyrrole isomers and cisoid stereochemistry is preferred over transoid. This contrasts with porphyrin complexes containing BOB groups for which both stereochemical possibilities are observed, and reflects the contracted size of the corrole macrocycle. Three further diboron corroles were investigated, the diboranyl cation [B(2)(corrole)](+) and its one- and two-electron reduced derivatives B(2)(corrole) and [B(2)(corrole)](-). These calculations were undertaken to determine whether the site of reduction of [B(2)(corrole)](+) is likely to be the diboron moiety or the macrocycle. The B-B bond lengths do not shorten upon reduction and an analysis of the molecular orbitals of each species indicates that reduction will be most likely to occur at the macrocycle, offering a potential route to an example of the two-electron reduced corrole ligand, an analogue of the 20-electron isophlorin ligand observed in the corresponding reduced porphyrin complex B(2)(porphine).     

One-step conversions of a simple corrole into chiral and amphiphilic derivatives

The reactions of phosgene with 5,10,15-tris(pentafluorophenyl)corrole and its gallium(III) complex lead to a novel chiral macrocycle and an amphiphilic corrole, respectively. Both types of molecules were fully characterized by spectroscopy and X-ray crystallography.     

咔咯锰(Ⅲ)配合物催化RNA磷酸二酯类似物HpPNP的水解断裂反应机理

采用密度泛函B3LYP方法研究了咔咯锰(Ⅲ)配合物催化水解断裂RNA磷酸二酯类似物2-羟丙基-4-硝基苯基磷酸酯(HpPNP)的反应机理以及中位取代基的性质和数目对反应能垒的影响。计算结果表明:断裂反应以特殊碱催化(SBC)机理进行,咔咯锰(Ⅲ)配合物与HpPNP形成双氢键和双配位独特的过渡态结构,经由P-O键断裂后形成产物。与无催化剂时相比,带吸电子取代基的咔咯锰(Ⅲ)配合物的催化能使反应能垒下降4%~34%。咔咯锰(Ⅲ)配合物中位的吸电子取代基效应能显著降低反应能垒,促进水解断裂反应的进行。     

Iodinated aluminum(III) corroles with long-lived triplet excited states

The first reported iodination of a corrole leads to selective functionalization of the four C-H bonds on one pole of the macrocycle. An aluminum(III) complex of the tetraiodinated corrole, which exhibits red fluorescence, possesses a long-lived triplet excited state.     

Synthesis and characterization of germanium, tin, phosphorus, iron, and rhodium complexes of tris(pentafluorophenyl)corrole, and the utilization of the iron and rhodium corroles as cyclopropanation catalysts

The germanium(IV), tin(IV). and phosphorus(v) complexes of tris(pentafluorophenyl)corrole were prepared and investigated by electrochemistry for elucidation of the electrochemical HOMO-LUMO gap of the corrole and the spectroscopic characteristics of the corrole pi radical cation. This information was found to be highly valuable for assigning the oxidation states in the various iron corroles that were prepared. Two iron corroles and the rhodium(I) complex of an N-substituted corrole were fully characterized by X-ray crystallography and all the transition metal corroles were examined as cyclopropanation catalysts. All iron (except the NO-ligated) and rhodium corroles are excellent catalysts for cyclopropanation of styrene, with the latter displaying superior selectivities. An investigation of the effect of the oxidation state of the metal and its ligands leads to the conclusion that for iron corroles the catalytically active form is iron(III), while all accesible oxidation states of rhodium are active.     

Synthesis and characterization of a stable bismuth(III) A3-corrole

An efficient metalation procedure for bismuth complexes with meso-substituted corrole ligands is presented. Reaction of 5,10,15-tris-pentafluorophenylcorrole H(3)(TpFPC) with Bi{N(SiMe(3))(3)} converts the free ligand H(3)(TpFPC) to a neutral low-valent species Bi(TpFPC), which has been characterized by different spectroscopic techniques. (Spectro)electrochemical studies were performed in order to describe the redox potentials of the Bi(TpFPC) complex and to ascribe the sites of electron transfer. The first crystal structure of a bismuth corrole is presented and compared to the geometry-optimized molecular structure obtained with density functional theory (DFT) calculations. We show an example of a 4-coordinate metallocorrole with a very large out-of-plane displacement and significant doming. The electronic structure of the novel bismuth corrole system is discussed in detail. Time-dependent DFT results support the proposed assignment of electronic transitions observed for the Bi(TpFPC) derivative. To account for the reactivity we investigated the photocatalytic properties of the Bi(TpFPC) complex.     

Functionalization of corroles: the nitration reaction

The reaction of meso-triarylcorroles with AgNO2 proceeds with concomitant metalation and peripheral substitution to give the corresponding nitro-substituted silverIII corrole complex. The substitution is highly regioselective, giving only the corresponding 3-nitro derivative, among the different possible isomers. The results obtained indicate that the reaction intermediate is the pi-cation radical of the complex, which is then attacked by nitrite ion. This was proven by the reaction of the copper corrole complexes with NaNO2: in this case, the nitration reaction proceeded without the addition of an oxidant, because of the pi-cation radical character of the copper complex. The reaction is also successful in the case of 2,3,17,18-tetraethyl-8,12-diacetoxymethyl-7,13-dimethylcorrole (AMCorH3), with the formation of the meso-substituted silver corrole derivative (NO2)3AMCorAg (fully characterized by X-ray crystallography), the first of its kind to be reported. Two of the corroles are characterized by cyclic voltammetry and spectroelectrochemistry in dichloromethane, and the site of electron transfer is elucidated.     

Determination of interaction strength between corrole and phenol derivatives in aqueous media using atomic force microscopy

Atomic force microscopy (AFM) was used to measure single interaction forces between corrole (host) and phenol derivatives (guests) in aqueous media. A gold tip was modified with thiol derivatives of corrole via the Au–S covalent bond. Such a tip was used to measure adhesion forces with a planar gold substrate modified with thiol derivatives of phenol and ortho-nitrophenol in aqueous solutions. The mean force between the corrole and ortho-nitrophenol was higher than that between corrole and phenol, probably reflecting stronger hydrogen bond interaction in the former complex. In the presence of a supporting electrolyte (0.1 M K₂SO₄), the mean force increased, suggesting that electrostatic and π–π interactions play an essential role in the adhesion force. In addition, the adhesion force measured at pH 6.0 was larger than that at pH 10, reflecting the electrostatic repulsion at the higher pH. These behaviours are consistent with the potentiometric responses of a liquid membrane based on corrole to phenolic compounds. Also, the values of forces for the interaction between corrole and phenol derivatives showed the same tendency as energy calculated for these complexes. The Poisson method was used for the calculation of the single force of the chemical bond between the corrole host and the phenolic guests.     

Bis‐copper(II) Complex of Triply‐linked Corrole Dimer and Its Dication

Copper complexes of corroles have recently been a subject of keen interest due to their ligand non‐innocent character and unique redox properties. Here we investigated bis‐copper complex of a triply‐linked corrole dimer that serves as a pair of divalent metal ligands but can be reduced to a pair of trivalent metal ligands. Reaction of triply‐linked corrole dimer 2 with Cu(acac)₂ (acac=acetylacetonate) gave bis‐copper(II) complex 2Cu as a highly planar molecule with a mean‐plane deviation value of 0.020 Å, where the two copper ions were revealed to be divalent by ESR, SQUID, and XPS methods. Oxidation of 2Cu with two equivalents of AgBF₄ gave complex 3Cu , which was characterized as a bis‐copper(II) complex of a dicationic triply‐linked corrole dimer not as the corresponding bis‐copper(III) complex. In accord with this assignment, the structural parameters around the copper ions were revealed to be quite similar for 2Cu and 3Cu . Importantly, the magnetic spin–spin interaction differs depending on the redox‐state of the ligand, being weak ferromagnetic in 2Cu and antiferromagnetic in 3Cu .     

DNA binding and nuclease activity of a water-soluble sulfonated manganese(III) corrole

The interaction of a water-soluble sulfonated Mn(III) corrole Mn(tpfc)(SO₃Na)₂ [tpfc = 5,10,15-tris(pentafluorophenyl)corrole] with calf thymus DNA (ct-DNA) has been studied by spectroscopic methods, and the nuclease activity of this complex has also been examined by agarose gel electrophoresis. Mn(tpfc)(SO₃Na)₂ exhibits weak aggregation tendency in buffer solution and can bind to ct-DNA via an outside binding mode with a binding constant of 1.25 × 10⁴ M^?1. The observed increase in Stern–Volmer quenching constant with increasing temperature indicates that the competition of the manganese corrole and ethidium bromide with ct-DNA is a dynamic process. Moreover, the manganese corrole displays good chemical nuclease activity in the presence of hydrogen peroxide via oxidative cleavage of DNA.     

Synthesis, structure, and aromaticity of the nickel(II) complex of pyricorrole, a molecular hybrid of porphyrin and corrole

Formal migration of one meso-carbon atom in the porphyrin ring into the pyrrole moiety results in an isomer "pyricorrole", a pyridine-containing corrole macrocycle. We prepared the nickel(II) complex of pyricorrole by the nickel(II)-induced cyclization of a linear precursor. Electronic absorption and proton NMR spectra of this compound revealed the presence of an 18π-electron circuit over the macrocycle, suggesting that aromaticity was retained after intensive rearrangement of the porphyrin core. X-ray crystallography of the nickel(II) complex confirmed the planar structure and demonstrated that it possesses hybrid properties of porphyrin and corrole.     

Synthesis and biradicaloid character of doubly linked corrole dimers

Directly linked corrole dimer 1, which has a planar cyclooctatetraene in its core, has been synthesized from 2-borylcorrole in excellent yield. 2,3-Dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) oxidation of 1 provides its oxidized form 4, which has two NH protons in each corrole core. Dicorrole 4 and its Zn(II) complex 6 exhibit broad electronic absorption spectra, and magnetic measurement has revealed their biradicaloid character.     

Triply Linked Corrole Dimers

The oxidation of 10–10′ singly linked corrole dimers with DDQ at low concentration in CHCl₃ afforded meso–meso, β–β, β–β triply linked 2H‐corrole dimers (with two inner NH groups in each corrole unit), which exhibited characteristic ¹H NMR and absorption spectra attributable to their nonaromatic electronic networks. These 2H‐corrole dimers were reduced with NaBH₄ to aromatic 3H‐corrole dimers, which were unstable and easily oxidized back to the 2H‐corrole dimers upon exposure to air. Bis(zinc(II)) complexes of the 2H‐corrole dimers were synthesized and characterized as rare examples of nonaromatic zinc(II) corrole complexes.     

Triply Linked Corrole Dimers

The oxidation of 10–10′ singly linked corrole dimers with DDQ at low concentration in CHCl₃ afforded meso–meso, β–β, β–β triply linked 2H‐corrole dimers (with two inner NH groups in each corrole unit), which exhibited characteristic ¹H NMR and absorption spectra attributable to their nonaromatic electronic networks. These 2H‐corrole dimers were reduced with NaBH₄ to aromatic 3H‐corrole dimers, which were unstable and easily oxidized back to the 2H‐corrole dimers upon exposure to air. Bis(zinc(II)) complexes of the 2H‐corrole dimers were synthesized and characterized as rare examples of nonaromatic zinc(II) corrole complexes.     

Study of Cobalt(III) Corrole as the Neutral Ionophore for Nitrite and Nitrate Detection via Polymeric Membrane Electrodes

Cobalt(III) 5,10,15‐tris(4‐tert‐butylphenyl) corrole was synthesized and incorporated into plasticized poly(vinyl chloride) membranes and studied as a neutral carrier ionophore via potentiometry. This cobalt(III) complex has binding affinity to nitrite, and the resulting membrane electrode yields reversible and Nernstian response toward nitrite. Enhanced nitrite selectivity is observed over other anions, including lipophilic anions such as thiocyanate and perchlorate when an appropriate amount of lipophilic cationic sites are added to the membrane phase. Detection limit to nitrite is ca. 5 µM. Using tributylphosphate as the plasticizer with the cobalt(III) corrole species yields electrodes with enhanced nitrate selectivity.     

Solvent effects on oxygen atom transfer reaction between manganese(V)-oxo corrole and alkene

Pseudo-first order reaction rate constants of 5,10,15-tris（pentafluorophenyl）corrole Mn（V）-oxo (F₁₅CMn（V）-oxo),5,15-bis（pentafluorophenyl）-10-（phenyl）corrole Mn（V）-oxo(F₁₀CMn（V）-oxo),5,15- bis（phenyl）-10-（pentafluorophenyl）corrole Mn（V）-oxo（F₅CMn（V）-oxo） and 5,10,15-tris（phenyl）corrole Mn（V）-oxo（F₀CMn（V）-oxo） with a series of alkene substrates in different solvents were determined by UV-vis spectroscopy.The results indicated that the oxygen atom transfer pathway between Mn（V）-oxo corrole and alkene is solvent-dependent.     

meso-meso-Linked corrole dimers with modified cores: synthesis, characterization, and properties

The synthesis and characterization of the first examples of core-modified corrole dimers linked through the meso positions are described. The dimers are obtained by a simple Ag(I)- or Fe(III)-catalyzed coupling reaction in near-quantitative yields. The corroles obtained are metalated with metal ions, such as Cu(II) and Ni(II). The electronic-absorption spectral studies reveal weak electronic interaction between the two subunits and the exciton coupling observed for the free-base corrole dimer (1717 cm(-1)) is lower than that for the corresponding protonated derivative (4081 cm(-1)). The solution-state structure derived from (1)H and two-dimensional NMR spectral studies reveals a noncoplanar arrangement of two corrole units. Geometry optimization at the B3LYP-631G level also confirms the noncoplanar arrangement of corroles with a dihedral angle of 64.8 degrees between two corrole planes. The electron paramagnetic resonance (EPR) and magnetic characterization studies on the paramagnetic copper-metalated dimer indicate that both copper ions behave as independent spins without any noticeable interaction. Results of fluorescence studies reveal a bathochromic shift of about 60 nm upon dimerization. The first hyperpolarizability (beta) measured by using the hyper Rayleigh scattering (HRS) method reveals doubling of the beta values on progressing from monomer to dimer, attributed to enhanced pi conjugation. The use of copper dimers in the photocleavage of DNA is also explored. It is shown that the bimetallic copper dimer selectively cleaves the nucleic acids without affecting the proteins, suggesting a possible application of the copper complex in the removal of nucleic acid contaminants from protein extracts through a simple photolytic pathway.     

Reactivity studies of a corrole germanium hydride complex with aldehydes, olefins and alkyl halides

The tris(pentafluorophenyl) corrole germanium hydride complex (TPFC)Ge-H was prepared by the reduction of (TPFC)Ge-OCH(3) with NaBH(4). The reactivity of (TPFC)Ge-H with series of aldehydes, olefins and alkyl halides to produce α-hydroxy alkyl and alkyl complexes was studied.