A neutron scattering perspective on the structure,softness and dynamics of the ligand shell of PbS nanocrystals in solution

Small-angle neutron and X-ray scattering, neutron backscattering and neutron time-of-flight spectroscopy are applied to reveal the structure of the ligand shell, the temperature-dependent diffusion properties and the phonon spectrum of PbS nanocrystals functionalized with oleic acid in deuterated hexane. The nanocrystals decorated with oleic acid as well as the desorbed ligand molecules exhibit simple Brownian diffusion with a Stokes–Einstein temperature-dependence and inhibited freezing. Ligand molecules desorbed from the surface show strong spatial confinement. The phonon spectrum of oleic acid adsorbed to the nanocrystal surface exhibits hybrid modes with a predominant Pb-character. Low-energy surface modes of the NCs are prominent and indicate a large mechanical softness in solution. This work provides comprehensive insights into the ligand–particle interaction of colloidal nanocrystals in solution and highlights its effect on the diffusion and vibrational properties as well as their mechanical softness.

Time-averaged and energy-resolved neutron and X-ray scattering reveal the structure of the ligand shell, temperature-dependent diffusion and the phonon spectrum of PbS nanocrystals functionalized with oleic acid in solution.     

Synthesis of organic monolayer-stabilized copper nanocrystals in supercritical water

When water is heated and pressurized above the critical point, it becomes a suitable solvent to employ organic capping ligands to control and stabilize the synthesis of nanocrystals. Without alkanethiol ligands, Cu(NO(3))(2) hydrolyzes to form polydisperse copper(II) oxide particles with diameters from 10 to 35 nm. However, in the presence of 1-hexanethiol, X-ray photoelectron spectroscopy, selected area electron diffraction, and transmission electron microscopy reveal the formation of copper nanocrystals approximately 7 nm in diameter. The use of a different precursor, Cu(CH(3)COO)(2), leads to particles with significantly different morphologies. A mechanism is proposed for sterically stabilized nanocrystal growth in supercritical water that describes competing pathways of hydrolysis to large oxidized copper particles versus ligand exchange and arrested growth by thiols to produce small monodisperse Cu nanoparticles.     

Ag∶InP/ZnSe纳米晶的合成与生物成像

采用高温热注入法, 以P[N(CH3)2]3为磷源合成了具有近红外荧光的Ag∶InP/ZnSe纳米晶. 采用紫外|可见|近红外吸收光谱(UV|Vis|NIR)、 荧光光谱、 透射电子显微镜(TEM)、 X 射线衍射(XRD)等对产物的结构和光学性质进行了表征, 并分析了Ag掺杂浓度和温度对InP纳米晶荧光性能的影响. 通过调节Ag掺杂浓度和反应温度, 发现当Ag掺杂量为6%, 反应温度为200 ℃时, Ag∶InP纳米晶的发光效率最高. 将制备的Ag∶InP的表面包覆ZnSe, 粒子的荧光效率从原来的20%提高到45%. 将具有近红外荧光的Ag∶InP/ZnSe纳米晶应用于细胞成像, 结果表明制备的荧光纳米晶在细胞成像中清晰可见且毒性较低.     

Metallic nature and surface diffusion of CO adsorbed on Ru nanoparticles in aqueous media: A 13C NMR study

We report the first observation of the 13C nuclear magnetic resonance spectroscopy (NMR) of 13CO, adsorbed from 13CO saturated 0.5 M sulfuric acid solutions, onto the surfaces of commercial Ru-black nanoparticles. The 13C NMR spectra consist of a symmetrically broadened peak having a large isotropic shift as compared to CO adsorbed onto supported Ru catalysts. The variation of the spin-lattice relaxation rate follows Korringa behavior, indicating the metallic nature of adsorbed CO, in addition to varying across the spectrum in a Korringa-like manner. Motional narrowing of the NMR spectrum at higher temperatures, together with an additional contribution to the spin-lattice relaxation rate, indicate that adsorbed CO undergoes rapid diffusion on the particle surfaces. A two-band model analysis of the NMR results indicates that the CO adsorption bond is weaker on Ru as compared to either Pt or Pd. This is also supported by a reduction in the activation energy for CO diffusion on Ru vs either Pt or Pd nanoparticles.     

Synthesis of biocompatible poly[2-(methacryloyloxy)ethyl phosphorylcholine]-coated magnetite nanoparticles

A well-defined, double-hydrophilic diblock copolymer comprising poly[2-(methacryloyloxy)ethyl phosphorylcholine]-block-(glycerol monomethacrylate) (PMPC30-PGMA30, where the numbers represent the average degrees of polymerization for each block) was evaluated for the synthesis of colloidally stable ultrafine magnetite sols. Sterically stabilized paramagnetic sols were prepared in aqueous solution by chemical coprecipitation of ferric and ferrous salts in the presence of this block copolymer. The PMPC30-PGMA30-stabilized magnetite sol had a mean transmission electron microscopy (TEM) diameter of 9.4 +/- 1.7 nm and a mean hydrodynamic diameter of 34 nm. This sol exhibited improved colloidal stability with respect to long-term storage and pH variation compared with magnetite sols prepared in the presence of alternative water-soluble homopolymers and diblock copolymers. Fourier transform infrared (FT-IR) spectroscopy, thermogravimetry, electron spectroscopy imaging (ESI), and zeta potential studies indicate that the PMPC30-PGMA30 diblock copolymer was adsorbed onto the surface of the sol via the PGMA30 block, with the PMPC30 chains acting as the stabilizing block. Such sterically stabilized sols are expected to be improved contrast agents for magnetic resonance imaging (MRI) applications.     

Surface chemistry of colloidal PbSe nanocrystals

Solution nuclear magnetic resonance spectroscopy (NMR) is used to identify and quantify the organic capping of colloidal PbSe nanocrystals (Q-PbSe). We find that the capping consists primarily of tightly bound oleic acid ligands. Only a minor part of the ligand shell (0-5% with respect to the number of oleic acid ligands) is composed of tri- n-octylphosphine. As a result, tuning of the Q-PbSe size during synthesis is achieved by varying the oleic acid concentration. By combining the NMR results with inductively coupled plasma mass spectrometry, a complete Q-PbSe structural model of semiconductor core and organic ligands is constructed. The nanocrystals are nonstoichiometric, with a surface that is composed of lead atoms. The absence of surface selenium atoms is in accordance with an oleic acid ligand shell. NMR results on a Q-PbSe suspension, stored under ambient conditions, suggest that oxidation leads to the loss of oleic acid ligands and surface Pb atoms, forming dissolved lead oleate.     

Adsorption of bovine alpha-lactalbumin on suspended solid nanospheres and its subsequent displacement studied by NMR spectroscopy

Detailed knowledge of the adsorption-induced conformational changes of proteins is essential to understand the process of protein adsorption. However, not much information about these conformational changes is available. Here, the adsorption of calcium-depleted (APO)- and calcium-containing (HOLO)-bovine alpha-lactalbumin (BLA) on suspended solid polystyrene nanospheres and their subsequent displacement by a surfactant are studied by NMR spectroscopy. To our knowledge, this is the first time that adsorption of proteins on solid nanospheres, with both components present in the NMR sample, is studied by this method. High-quality one-dimensional and two-dimensional 1H NMR spectra of nonadsorbed APO- and HOLO-BLA in the presence of BLA- and/or surfactant-covered solid polystyrene nanospheres in suspension are obtained using standard NMR procedures. BLA and surfactant molecules that are adsorbed on the polystyrene nanospheres give rise to extremely broadened proton resonances. This can be exploited to determine the amount of adsorbed protein and of adsorbed surfactant in a system containing protein, nanospheres, and surfactant, without disturbing the equilibrium of the system. Two-dimensional 1H NMR spectroscopy shows that the chemical shifts of the backbone amide protons of HOLO-BLA after its adsorption and subsequent displacement from polystyrene nanospheres by the surfactant 3-[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate (CHAPS) are identical to those of native HOLO-BLA. The adsorption-induced unfolding of BLA to a molten globule state on polystyrene nanospheres is thus fully reversible at the residue level upon CHAPS-induced displacement of BLA. The latter is the now fulfilled essential requirement that enables the future indirect study, at the residue level, of the conformational characteristics of BLA adsorbed on polystyrene nanospheres by hydrogen/deuterium exchange and NMR spectroscopy. The results presented show that NMR spectroscopy is clearly feasible to study the adsorption of BLA on suspended polystyrene nanospheres. This technique should be applicable to the study of the adsorption of other proteins on other surfaces as well.     

Carboxylic‐Acid‐Passivated Metal Oxide Nanocrystals: Ligand Exchange Characteristics of a New Binding Motif

Ligand exchange is central in the processing of inorganic nanocrystals (NCs) and requires understanding of surface chemistry. Studying sterically stabilized HfO₂ and ZrO₂ NCs using ¹H solution NMR and IR spectroscopy as well as elemental analysis, this paper demonstrates the reversible exchange of initial oleic acid ligands for octylamine and self‐adsorption of oleic acid at NC surfaces. Both processes are incompatible with an X‐type binding motif of carboxylic acids as reported for sulfide and selenide NCs. We argue that this behavior stems from the dissociative adsorption of carboxylic acids at the oxide surface. Both proton and carboxylate moieties must be regarded as X‐type ligands yielding a combined X₂ binding motif that allows for self‐adsorption and exchange for L‐type ligands.     

Templated Growth of InP Nanocrystals with a Polytwistane Structure

We have synthesized InP nanocrystals of an unprecedented crystal phase at low temperature (35–100 °C) by templated growth of InP magic‐sized clusters. With the addition of stoichiometric equivalents of P(SiMe₃)₃ to the starting cluster, we demonstrate nanocrystal growth mediated through a partial dissolution and recrystallization pathway. This growth process was monitored using a combination of in situ UV/Vis and ³¹P NMR spectroscopy, revealing the intermediacy of smaller cluster species of higher symmetry. The nanocrystals that result from this templated growth exhibit a crystal structure that is neither zincblende nor wurtzite, and instead is derived from the original cluster. This structure is best described as a 3D polytwistane phase as deduced from a combination of X‐ray diffraction, Raman, and solid‐state NMR spectroscopy methods.     

Adsorption of sterically stabilized latex particles at liquid surfaces: effects of steric stabilizer surface coverage, particle size, and chain length on particle wettability

A series of five near-monodisperse sterically stabilized polystyrene (PS) latexes were synthesized using three well-defined poly(glycerol monomethacrylate) (PGMA) macromonomers with mean degrees of polymerization (DP) of 30, 50, or 70. The surface coverage and grafting density of the PGMA chains on the particle surface were determined using XPS and (1)H NMR spectroscopy, respectively. The wettability of individual latex particles adsorbed at the air-water and n-dodecane-water interfaces was studied using both the gel trapping technique and the film calliper method. The particle equilibrium contact angle at both interfaces is relatively insensitive to the mean DP of the PGMA stabilizer chains. For a fixed stabilizer DP of 30, particle contact angles were only weakly dependent on the particle size. The results are consistent with a model of compact hydrated layers of PGMA stabilizer chains at the particle surface over a wide range of grafting densities. Our approach could be utilized for studying the adsorption behavior of a broader range of sterically stabilized inorganic and polymeric particles of practical importance.     

Charge separation in heterostructures of InP nanocrystals with metal particles

The optical and electron paramagnetic resonance (EPR) properties of InP nanocrystals, in which metallic gold or indium is present as an incorporated part of the nanocrystals, have been studied. A study of Au/InP quantum rods supports different carrier localization regimes compared to metal-free quantum rods, including the charge-separated state for which the electron and hole are located in different parts of the heterostructure. They also show that elongated semiconductors that grow on metallic catalysts have electronic properties that are different from those of pure semiconductor nanocrystals of the same shape. We have also developed a simple method for growing melted indium particles on the surface of colloidal spherical InP nanocrystals, and in these In/InP nanocrystals the emission is completely quenched while the absorption spectrum moves to red due to the strong mixing of the semiconductor and metal electronic states.     

Electron transfer between colloidal ZnO nanocrystals

Colloidal ZnO nanocrystals capped with dodecylamine and dissolved in toluene can be charged photochemically to give stable solutions in which electrons are present in the conduction bands of the nanocrystals. These conduction-band electrons are readily monitored by EPR spectroscopy, with g* values that correlate with the nanocrystal sizes. Mixing a solution of charged small nanocrystals (e(-)(CB):ZnO-S) with a solution of uncharged large nanocrystals (ZnO-L) caused changes in the EPR spectrum indicative of quantitative electron transfer from small to large nanocrystals. EPR spectra of the reverse reaction, e(-)(CB):ZnO-L + ZnO-S, showed that electrons do not transfer from large to small nanocrystals. Stopped-flow kinetics studies monitoring the change in the UV band-edge absorption showed that reactions of 50 μM nanocrystals were complete within the 5 ms mixing time of the instrument. Similar results were obtained for the reaction of charged nanocrystals with methyl viologen (MV(2+)). These and related results indicate that the electron-transfer reactions of these colloidal nanocrystals are quantitative and very rapid, despite the presence of ~1.5 nm long dodecylamine capping ligands. These soluble ZnO nanocrystals are thus well-defined redox reagents suitable for studies of electron transfer involving semiconductor nanostructures.     

Surface Stoichiometry of CdSe Nanocrystals Determined by Rutherford Backscattering Spectroscopy

Rutherford backscattering spectroscopy has been applied to study the surface stoichiometry of CdSe nanocrystals prepared by the high temperature pyrolysis of organometallics in trioctylphosphine oxide (TOPO). The diameter of the nanocrystals was varied from 22 to 56 Å. For all nanocrystal sizes we find the nanocrystals are Cd rich with an average Cd:Se ratio of 1.2±0.1. The Cd:Se stoichiometry is independent of the Cd:Se starting ratio used for the nanocrystal synthesis, indicating the excess Cd is not associated with the initial abundance of Cd but is an intrinsic property of nanocrystals prepared by this method. The surface coverage of the passivating TOPO ligands has also been determined and is larger than reported in previous X-ray photoelectron spectroscopy (XPS) studies of Bowen Katari et al.[1] The origin and structural implications of nonstoichiometric nanocrystals are discussed.     

Identification of acidic phosphorus-containing ligands involved in the surface chemistry of CdSe nanoparticles prepared in tri-N-octylphosphine oxide solvents

The surface ligand composition of CdSe nanoparticles prepared using technical grade tri-n-octylphosphine oxide (TOPO) was investigated using a nucleophilic ligand displacement methodology and (31)P {(1)H} NMR spectroscopy. 4-(N,N-Dimethylamino)pyridine (DMAP) and benzyltrimethylammonium propionate were added to tetrahydrofuran solutions of CdSe nanoparticles prepared in technical grade TOPO. DMAP was shown to be a sufficiently strong nucleophile to displace the more weakly coordinating ligands, TOPO, TOPSe, di-n-octylphosphinate, and n-octylphosphonate (OPA). Benzyltrimethylammonium propionate was shown to be a stronger nucleophile than DMAP in that it could displace all the aforementioned surface-bound ligands as well as a previously unidentified surface-bound phosphorus species. Independent synthesis and (31)P {(1)H} NMR spectral matching confirmed that the new species was P,P'-(di-n-octyl) dihydrogen pyrophosphonic acid (PPA). The PPA was shown to form during the nanoparticle synthesis via the dehydrative condensation of OPA. CdSe nanoparticle syntheses were performed using pure TOPO and added OPA, and subsequent displacement experiments showed that OPA and PPA were the predominant surface-bound ligands. CdSe nanoparticle syntheses were performed using pure TOPO and added PPA, and subsequent displacement experiments showed that PPA was the predominant surface-bound ligand. PPA was also shown to have the greatest affinity for the nanoparticle surface of all the ligands investigated. Thus, a model for the surface ligand composition could be developed for nanoparticles prepared using technical grade TOPO or other high-boiling solvents with added acidic phosphorus compounds.     

Spectroscopic studies on the interactions between a bioactive diperoxovanadate complex and pyridine

Interactions between a bioactive diperoxovanadate complex K3[OV(O2)2(C2O4)].H2O and pyridine in solution were studied by 2D NMR diffusion ordered spectroscopy (DOSY) as well as 1D 1H, 13C, 14N, and 51V NMR, variable temperature 1H NMR and spin-lattice relaxation time. Competitive coordination between C2O(4)(2-) and pyridine to [OV(O2)(2)](-) were observed in solution. A new species [OV(O2)2(Py)](-) was formed and its NMR data were reported for the first time. The experimental results indicated that both of the vanadium atom in species [OV(O2)2(C2O4)](3-) and [OV(O2)2(Py)](-) are six coordinated in solution. The conclusion was further supported by the results of ESI-MS. The newly-formed species is stable under the condition of near physiological pH value.     

Growth of InP nanostructures via reaction of indium droplets with phosphide ions: synthesis of InP quantum rods and InP-TiO2 composites

InP quantum rods were synthesized via the reaction of monodispersed colloidal indium droplets with phosphide ions. In(0) droplets, which do not act as a catalyst but rather a reactant, are completely consumed. The excess electrons that are produced in this reaction are most likely transferred to an oxide layer at the indium surface. For the synthesis of InP quantum rods with a narrow size distribution, a narrow size distribution of In(0) particles is also required because each indium droplet serves as a template to strictly limit the lateral growth of individual InP nanocrystals. Free-standing quantum rods, 60, 120, or 150 A in diameter, with aspect ratios of 1.6-3.5, and without the residual metallic catalyst at the rod tip, were synthesized from the diluted transparent solution of metallic indium particles. The same approach was used to synthesize InAs quantum rods. A photoactive InP-TiO(2) composite was also prepared by the same chemical procedure; InP nanocrystals grow as well-defined spherical or slightly elongated shapes on the TiO(2) surface.     

Disproportionation of Iron(III) Porphyrin pi-Cation Radicals in the Presence of Sterically Hindered Pyridines. Spectroscopic Detection of Asymmetric Highly Oxidized Intermediates

The reactivity of iron(III) tetraphenylporphyrin pi-cation radical (TPP(*))Fe(III)(ClO(4))(2), (1-1) iron(III) tetra-p-tolylporphyrin pi-cation radical (TTP(*))Fe(III)(ClO(4))(2) (1-2) and iron(III) tetramesitylporphyrin pi-cation radical (TMP(*))Fe(III)(ClO(4))(2) (1-3) complexes with 2,4,6-collidine, 2,3,6-collidine, 2-picoline, 2,6-di-tert-butylpyridine, and 2,6-dibromopyridine has been examined by (1)H NMR spectroscopy in dichloromethane-d(2) solution at low temperatures. These complexes undergo hydration processes which are essential in the generation of highly oxidized species via acid base/equilibria of coordinated water followed by disproportionation pathway, giving as sole stable products [(TPP(*))Fe(III)OFe(III)(TPP)](+) (4-1), [(TTP(*))Fe(III)OFe(III)(TTP)](+) (4-2), and (TMP)Fe(III)(OH) (6) respectively. The sterically hindered pyridines act as efficient proton scavengers. Two novel highly oxidized iron complexes have been detected by (1)H NMR spectroscopy after addition of 2,4,6-collidine to (TTP(*))Fe(III)(ClO(4))(2) or (TPP(*))Fe(III)(ClO(4))(2) in dichloromethane-d(2) solution at 202 K. New intermediates have been identified as iron porphyrin N-oxide complexes, i.e., iron(III) porphyrin N-oxide cation radical (2-n) and iron(IV) porphyrin N-oxide radical (3-n). The (1)H NMR results indicate that the D(4)(h)() symmetry of the parent iron(III) pi-cation radical is drastically reduced upon disproportionation in the presence of proton scavengers. Both species are very unstable and were observed from 176 to 232 K. The intermediate 2-2 has a (1)H NMR spectrum which demonstrates large hyperfine shifts (ppm) for the meso p-tolyl substituents (ortho 98.0, 94.8, 92.9, 91.7; meta -34.8, -38.7, -41.5, -42.3; p-CH(3) -86.3, -88.0) which are consistent with presence of an N-substituted iron porphyrin radical in the product mixture. The characteristic (1)H NMR spectrum of 2-2 includes six pyrrole resonances at 149.6, 118.2, 115.4, 88.3, 64.6, and 55.7 ppm at 202 K, i.e., in the positions corresponding to iron(III) high-spin porphyrins. On warming to 222 K, the pyrrole resonances broaden and then coalesce pairwaise. Such dynamic behavior is accounted for by a rearrangement mechanism which involves an inversion of the porphyrin puckering. The pattern of p-tolyl resonances revealed the cation radical electronic structure of 3-2. The p-tolyl resonances are divided in two distinct sets showing opposite direction of the isotropic shift for the same ring positions. The pyrrole resonances of 3-2 also demonstrated downfield and upfield shifts. A disproportionation mechanism of the hydrated iron porphyrin cation radicals to generate 2 and 3 has been proposed. Both intermediates react with triphenylphosphine to produce triphenylphosphine oxide and high-spin iron porphyrins. Addition of 2,4,6-collidine to (TMP(*))Fe(III)(ClO(4))(2) does not produce analogs of 2 and 3 found for sterically unprotected porphyrins. It results instead in the formation of a variety of X(TMP(*))Fe(IV)O (5) complexes also accounted for by the disproportionation process.     

Structural, optical, and electrical properties of PbSe nanocrystal solids treated thermally or with simple amines

We describe the structural, optical, and electrical properties of films of spin-cast, oleate-capped PbSe nanocrystals that are treated thermally or chemically in solutions of hydrazine, methylamine, or pyridine to produce electronically coupled nanocrystal solids. Postdeposition heat treatments trigger nanocrystal sintering at approximately 200 degrees C, before a substantial fraction of the oleate capping group evaporates or pyrolyzes. The sintered nanocrystal films have a large hole density and are highly conductive. Most of the amine treatments preserve the size of the nanocrystals and remove much of the oleate, decreasing the separation between nanocrystals and yielding conductive films. X-ray scattering, X-ray photoelectron and optical spectroscopy, electron microscopy, and field-effect transistor electrical measurements are used to compare the impact of these chemical treatments. We find that the concentration of amines adsorbed to the NC films is very low in all cases. Treatments in hydrazine in acetonitrile remove only 2-7% of the oleate yet result in high-mobility n-type transistors. In contrast, ethanol-based hydrazine treatments remove 85-90% of the original oleate load. Treatments in pure ethanol strip 20% of the oleate and create conductive p-type transistors. Methylamine- and pyridine-treated films are also p-type. These chemically treated films oxidize rapidly in air to yield, after short air exposures, highly conductive p-type nanocrystal solids. Our results aid in the rational development of solar cells based on colloidal nanocrystal films.     

Assembly of heteropoly acid nanoparticles in SBA-15 and its performance as an acid catalyst

Keggin‐type 12‐tungstophosphoric acid (TPA) nanocrystals have been assembled inside the pores of mesoporous silica through a vacuum impregnation method by using large‐pore SBA‐15 as a nanoreactor. The product was characterized by Brunauer–Emmet–Teller particle size distribution (BET‐PSD), NMR and FT‐IR spectroscopy, X‐ray diffraction (XRD), tranmsission electron microscopy (TEM), differential thermal analysis (DTA) and FT‐IR of adsorbed pyridine. The experimental results illustrate that the TPA nanocrystals are excellent Brønsted acid catalytic materials at room temperature.