Sequential injection lab-on-valve simultaneous spectrophotometric determination of trace amounts of copper and iron

A sequential injection (SI) method in a lab-on-valve (LOV) format for simultaneous spectrophotometric determination of copper and iron has been devised. The detection chemistry is based on the complex formation of 2-(5-bromo-2-pyridylazo)-5-[N-n-propyl-N-(3-sulfopropyl)amino]aniline (5-Br-PSAA) with copper(II) and/or iron(II) at pH 4.6. Copper(II) reacts with 5-Br-PSAA to form the complex which has an absorption maximum at 580 nm but iron(III) does not react. In the presence of a reducing agent only iron(II)-5-Br-PSAA complex is formed and detected at 558 nm. Under the optimum experimental conditions, the determinable ranges are 0.1-2 mg l⁻¹ for copper and 0.1-5 mg l⁻¹ for iron, respectively, with a sampling rate of 18 h⁻¹. The limits of detection are 50 μg l⁻¹ for copper and 25 μg l⁻¹ for iron. The relative standard deviations (n = 15) are 2% for 0.5 mg l⁻¹ copper and 1.8% for 0.5 mg l⁻¹ iron when determined in standard solutions. The recoveries range between 96 and 105% when determining 0.25-2 mg l⁻¹ of copper and 0.2-5 mg l⁻¹ of iron in artificial mixtures at copper/iron ratios of 1:10 to 5:1. The proposed SI-LOV method is successfully applied to the simultaneous determination of copper and iron in multi-element standard solution and in industrial wastewater samples.     

Dispersive liquid-liquid microextraction of Fe(II) and Cu(II) with diethyldithiocarbamate and their simultaneous spectrophotometric determination using mean centering of ratio spectra

A new dispersive liquid-liquid microextraction (DLLME) method for preconcentration of trace quantities of Fe(II) and Cu(II) followed by their spectrophotometric determination has been developed. For the extraction, an appropriate mixture of ethanol (the disperser solvent) and carbon tetrachloride (the extraction solvent) was injected rapidly into the water sample containing Fe(II) and Cu(II) after formation of complexes with diethyldithiocarbamate. Mean centering (MC) of ratio spectra has been used for simultaneous determination of Fe(II) and Cu(II). Linear range of the method is 1.0–100 ng/mL for Fe(II) and 0.3–100 ng/mL for Cu(II), the detection limit is 0.53 ng/mL and 0.14 ng/mL Cu(II), resp. The interference effect of some anions and cations is reported. The method was applied to the determination of Fe(II) and Cu(II) in well water samples.     

New spectrophotometer equipped with long light path length cells and two channel FIA for trace metals

New spectrophotometer was designed for the simultaneous assay of copper and iron using flow injection analysis and moreover, new 50 mm light path cells were equipped in the spectrophotometer to enhance the sensitivity. Both copper and iron at 2-10 ppb level were determined simultaneously and rapidly using water soluble reagent, 5-Br-PSAA. Determination limits were 1 ppb for copper and 1 ppb for iron. Relative standard deviations were about 1%.     

Microanalytical method development for Fe, Cu and Zn determination in colorectal cancer cells

Microanalytical methods suitable for the determination of Fe, Cu in HT-29 (human colon adenocarcinoma) cells treated with different iron compounds (Fe(II) sulfate, Fe(III) chloride, Fe(III) citrate and Fe(III) transferrin) and cultured in medium supplemented or not with 10% (v/v) fetal calf serum (FCS) by total reflection X-ray fluorescence spectrometry (TXRF) and simultaneous graphite furnace atomic absorption spectrometry (GF-AAS) were developed. The developed TXRF method was also suitable for Zn determination in the samples. The main advantage of the proposed methods is the execution of all sample preparation steps following incubation and prior to the elemental analysis in the same Eppendorf tubes. Sample preparation was performed at microscale (115 μL sample volume) with 65% nitric acid and 30% hydrogen peroxide. According to scanning electron microscopic measurements, the organic matrix of the cell samples could be eliminated to the extent that accurate results were obtained for Cu and Fe by analyzing the same samples by TXRF and GF-AAS. Concerning the iron uptake, HT-29 cells incubated in FCS-free medium contained Fe in cca. 5-50 times higher amounts compared to cells cultured in FCS supplemented medium. Pronounced differences in the iron uptake compared to the iron supply (inorganic vs. organic chelated as well as iron(II) vs. iron(III)) were observed in the case of cell lines incubated in FCS-free medium.     

Interaction of iron(II) and the simultaneous spectrophotometric determination of Fe, Cu, Zn, Co and Ni with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

Summary The reaction of Fe(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP) is studied in detail and procedures for the sensitive determination of Fe(II) at pH 4.7 (acetate buffer), pH 9.0 (borate buffer) and in the presence of EDTA are optimized. A simultaneous determination of Fe, Cu, Zn, Co and Ni in aqueous medium and of Fe, Cu and Zn in blood serum with Br-PADAP at pH 9.0 using multivariate calibration with PLS evaluation of absorbance data also give satisfactory results.     

High-performance liquid chromatography with sequential injection for online precolumn derivatization of some heavy metals

HPLC was coupled with sequential injection (SI) for simultaneous analyses of some heavy metals, including Co(II), Ni(II), Cu(II), and Fe(II). 2-(5-Nitro-2-pyridylazo)-5-[N-propyl-N-(3-sulfopropyl)amino]phenol (nitro-PAPS) was employed as a derivatizing reagent for sensitive spectrophotometric detection by online precolumn derivatization. The SI system offers an automated handling of sample and reagent, online precolumn derivatization, and propulsion of derivatives to the HPLC injection loop. The metal-nitro-PAPS complexes were separated on a C(18)-muBondapak column (3.9x300 mm(2)). Using the proposed SI-HPLC system, determination of four metal ions by means of nitro-PAPS complexes was achieved within 13 min in which the parallel of derivatization and separation were processed at the same time. Linear calibration graphs were obtained in the ranges of 0.005-0.250 mg/L for Cu(II), 0.007-1.000 mg/L for Co(II), 0.005-0.075 mg/L for Ni(II), and 0.005-0.100 mg/L for Fe(II). The system provides means for automation with good precision and minimizing error in solution handling with the RSD of less than 6%. The detection limits obtained were 2 microg/L for Cu(II) and Co(II), and 1 microg/L for Ni(II) and Fe(II). The method was successfully applied for the determination of metal ions in various samples, including milk powder for infant, mineral supplements, local wines, and drinking water.     

1-(2-Formamidoethyl)-3-phenylurea functionalized activated carbon for selective solid-phase extraction and preconcentration of metal ions

A novel method that utilizes 1-(2-formamidoethyl)-3-phenylurea-modified activated carbon (AC-1-(2-formamidoethyl)-3-phenylurea) as a solid-phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) prior to the measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions for effective adsorption of trace levels of Cr(III), Cu(II), Fe(III) and Pb(II) were optimized using batch and column procedures in detail. The optimum pH value for the separation of metal ions simultaneously on the new sorbent was 4. And the adsorbed metal ions could be completely eluted by using 2.0 mL 2.0 mol L⁻¹ HCl solution. Common coexisting ions did not interfere with the separation and determination of target metal ions. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 39.8, 39.9, 77.8 and 17.3 mg g⁻¹ for Cr(III), Cu(II), Fe(III) and Pb(II), respectively. The detection limits of the method were found to be 0.15, 0.41, 0.27 and 0.36 ng mL⁻¹ for Cr(III), Cu(II), Fe(III) and Pb(II), respectively. The relative standard deviation (RSD) of the method was lower than 4.0% (n = 8). The method was successfully applied for the preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) in natural and certified samples with satisfactory results.     

偏最小二乘分光光度法同时测定痕量铁、锰、铜、锌、钴和镍

痕量Fe^3 ,Mn^2 ,Cu^2 ,Zn^2 ,Co^2 ,Ni^2 与2－（5－溴－2－吡啶偶氮）－5－二乙氨基苯酚（5－Br-PADAP)和溴化十六烷基三甲基铵（CTMAB）在PH8．3时发生高灵敏显色反应，所形成的三元胶束络合的吸收光谱严重重叠，采用偏最小二乘法（PLS）辅助分光光度法测定了合成试样及饲料中上述6种痕量组分，结果表明，PLS法是化学计量学中一种可适用于基体较复杂的实际试样中痕量组分分光度同时测定的多元计算方法。     

Simultaneous kinetic determination of Fe(II) and Fe(III) based on their reactions with NQT4S in micellar media by using PLS and PCR methods

Simultaneous determination of Fe(II) and Fe(III) was studied using partial least squares regression (PLS) and principal component regression (PCR) methods. The models were based on the difference observed in the rates of the complex formation of iron in its two oxidation states with 1,2-naphthaquinone-2-thiosemicarbazone-4-sulphonic acid (NQT4S) at pH 4.0 in cetyltrimethylammoniumbromide (CTAB) as micellar media. The results showed that simultaneous determination of Fe(II) and Fe(III) could be performed in their concentration ranges of 0.10-2.10 and 0.25-2.25 μg/ml, respectively. The models used can proceed the data with low percent relative error of prediction (i.e. <5.5%). The procedure was successfully applied for the simultaneous determination of Fe(II) and Fe(III) in some environmental samples. The method would allow the transformation of the two oxidation states of iron to be monitored overtime in a water sample.     

多波长线性回归法用于同时光度测定铁和铜

在弱酸性介质中,在乳化剂OP存在下,铁、铜与PAN形成最大吸收均在550nm处的水溶性有色络合物,两者相互严重干扰。本文采用多波长回归分析法对此混合显色体系进行研究,选择在570～590nm区间,测定11个波长处的吸光度,使用简易程序计算器,进行数据回归处理,可简便快速地直接求出铁、铜的含量。应用于铝合金中铁、铜的同时测定,结果满意。     

Column preconcentration and FAAS determination of copper,iron, nickel and zinc using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol-tetraphenylborate-naphthalene adsorbent

A solid co-precipitated material obtained from an ion-pair of 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) and tetraphenylborate (TPB), and microcrystals of naphthalene has been tried as an adsorbent for the column preconcentration of copper(I), iron(II), nickel(II) and Zn(II). The retention of the metal ions was found to be maximum and constant in the pH range 3.0-8.0 for Cu, 3.8-7.5 for Fe, 4.5-7.5 for Ni and 8.5-11.0 for Zn. The elements were determined by FAAS after dissolving the metal along with the adsorbent in an organic solvent (10 mL of DMF). The characteristic concentration for 1% absorption was found to be 0.0332, 0.0536, 0.0537 and 0.0142 (aqueous medium 0.0512, 0.0638, 0.1294 and 0.0216) microg mL(-1) for Cu, Fe, Ni and Zn, respectively. The calibration plot was linear in the range 1.5-20.0, 2.0-38.0, 2.5-25.0 and 0.5-15.0 micro g in the final 10 mL of DMF solution for Cu, Fe, Ni and Zn, respectively. Various parameters such as pH, volume of buffer, amount of adsorbent, flow rate, preconcentration factor and effect of diverse salts and cations were studied. The optimised conditions were utilized for the determination of Cu, Fe, Ni and Zn in various water, beverage and human hair samples.     

Simultaneous determination of Fe(II) and Fe(III) by kinetic spectrophotometric H-point standard addition method

The H-point standard addition method (HPSAM) for simultaneous determination of Fe(II) and Fe(III) is described. The method is based on the difference in the rate of complex formation of iron in two different oxidation states with Gallic acid (GA) at pH 5. Fe(II) and Fe(III) can be determined in the range of 0.02–4.50 μg ml⁻¹ and 0.05–5.00 μg ml⁻¹, respectively, with satisfactory accuracy and precision in the presence of other metal ions, which rapidly form complexes with GA under working conditions. The proposed method was successfully applied for simultaneous determination of Fe(II) and Fe(III) in several environmental and synthetic samples with different concentration ratios of Fe(II) and Fe(III).     

Development of a novel rhodamine-type fluorescent probe to determine peroxynitrite

A flow injection (FI) method with on-line preconcentration using a mini-column loaded with 8-hydroxyquinoline immobilized on controlled pore glass (CPG-8HQ) is described for the determination of trace metals by ion chromatography (IC) with pyridine-2-6-dicarboxylic acid (PDCA) as the eluent. Copper, cadmium, lead, zinc, nickel and iron were determined at ppb level after post-column derivatization with 4-(2-pyridylazo)-resorcinol (PAR). The detection limits (3sigma) for the FI/IC system were 8.27, 0.89, 0.09, 0.06, 0.09 and 0.07 g l(-1) for Pb(2+), Cd(2+), Cu(2+) Ni(2+), Zn(2+) and Fe(3+), respectively, using 5 ml sample volume. The method was applied to the analysis of Malaysian natural waters.     

Simultaneous spectrophotometric determination of Fe(III), Al(III) and Cu(II) by partial least-squares calibration method

A spectrophotometric method for simultaneous determination of Fe(III), Al(III) and Cu(II) using Alizarin Red S as a chelating agent was developed. The parameters controlling behavior of the system were investigated and optimum conditions were selected. A partial least-squares multivariate calibration method was used for the analysis of ternary mixtures of Fe(III), Al(III) and Cu(II) over the range of 450-6000, 140-4000 and 450-15000 ng ml(-1), respectively. Absorbance data were taken between 400 and 800 nm. Applying this method to simultaneous determination of these metal ions in several synthetic alloy solutions with total relative standard error of less than 5% validated the proposed method.     

ICP-AES determination of trace elements after preconcentrated with p-dimethylaminobenzaldehyde-modified nanometer SiO2 from sample solution

A new method that utilizes p-dimethylaminobenzaldehyde-modified nanometer SiO₂ (SiO₂-p-DMABD) as a solid phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) prior to the measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The preconcentration conditions of analytes were investigated, including the pH value, the shaking time, the mass of sorbent, the sample flow rate and volume, the elution condition and the interfering ions. The adsorption capacity of nanometer SiO₂-p-DMABD was found to be (mg g^− 1) Cr(III): 6.2, Cu(II): 18.6, Fe(III): 4.7 and Pb(II): 6.0 at pH 4. The adsorbed metals were quantitatively eluted with 4 mL of 1.0 mol L^− 1 HCl. According to the definition of IUPAC, the detection limits (3σ) of this method for Cr(III), Cu(II), Fe(III) and Pb(II) were 0.79, 1.27, 0.40 and 1.79 ng mL^− 1, respectively. The proposed method achieved satisfied results when it was applied to the determination of trace Cr(III), Cu(II), Fe(III) and Pb(II) in biological and water samples.     

Separation and determination of trace amounts of aluminium(III), vanadium(V), iron(III), copper(II) and nickel(II) with CALKS and PAR by RP-HPLC.

An RP-HPLC method for the separation and determination of aluminium(III), vanadium(V), iron(III), copper(II) and nickel(II) with CALKS (Chromazol KS) and PAR ([4-(2-pyridylazo)resorcinol]) chelating on a YWG-ODS column was developed. A mixture of methanol-tetrahydrofuran(THF)-water (60:5:35 v/v) containing 0.2 mol/L LiCl, 5 x 10(-5) mol/L CALKS, 5 x 10(-5) mol/L PAR and acetate buffer solution (pH 4.9) was selected as mobile phase. The method has high sensitivity, with the detection limits being 6 ng/mL for aluminium(III), 3.5 ng/mL for vanadium(V), 10.4 ng/mL for iron(III), 6.3 ng/mL for copper(II) and 8.7 ng/mL for nickel(II). It also has good selectivity, so that most foreign metal ions do not interfere under the optimum conditions. The method can be applied to the simultaneous determination of trace amounts of aluminium, vanadium, iron, copper and nickel in rice and flour samples.     

Selective preconcentration, separation and speciation of ferric iron in different samples using N,N'-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane

The synthesis and analytical applications of N,N'-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane (HBDAP) are described. This compound reacts with Fe(III) in the range of pH 3-6 to produce a red complex (2:3 mol ratio of Fe(III)/HBDAP) soluble in chloroform. The investigation included a study of the characteristics that are essential for solvent extraction and for spectrophotometric determination and speciation of iron. A highly sensitive, selective and rapid spectrophotometric method is described for the determination of trace amounts of iron(III) by HBDAP. The complex obeys Beer's law from 0.056 to 1.68 mg l(-1) with an optimum range. The detection limit (taken as three times the standard deviation of the reagent blank) is approximately 1.23x10(-7) M Fe(III) and the limit of quantitation (taken as ten times the standard deviation of the reagent blank) is about 4.11x10(-7) M Fe(III). A single extraction gave a good separation of iron(III) from iron(II). Good separation of Fe(III) from Ni(II), Fe(II), Co(II), Cd(II), Mn(II), Zn(II), Pb(II) was also achieved at pH 3-5.     

Catalytic spectrophotometric determination of trace aluminium with indigo carmine

A new catalytic spectrophotometric method is described for the determination of trace amounts of Al(III). The methods based on catalytic action of Al(III) on the oxidation of indigo carmine (IC) by ammonium persulfate in hexamethylene tetramine-hydrochloric acid ((CH2)6N4-HCl) buffer medium (pH 5.4) and in the presence of surfactant-TritonX-100. The effects of some factors on the reaction speed were investigated. Aluminium concentration is linear for 0-1.2x10(-7) g/ml in this method. The detection limit of the proposed method is 1.96x10(-8) g/ml. Most of the foreign ions except for Cu(II), Fe(III) do not interfere with the determination, and the interference of Cu(II) and Fe(III) in this method can be removed by extraction with sodium diethyldithiocarbamate-carbon tetrachloride (DDTC-CCl4). This system is a quasi-zero-order reaction for Al(III), but it is a quasi-first-order reaction for IC. The apparent rate constant is 2.62x10(-5) s-1 and the apparent activation energy is 6.60 kJ/mol in the system. The proposed method was applied to the determination of trace aluminium(III) in real samples with satisfactory results.     

Speciation analysis of selenoproteins in human serum by microbore affinity-HPLC hyphenated to ICP-Sector field-MS using a high efficiency sample introduction system

Silica gel and nanometer SiO₂ modified with 4-(2-aminoethylamino)-N-(2-(2-aminoethyl amino)ethyl)butanamide (SG-AAEB and nanometer SiO₂-AAEB), which were prepared based on chemical immobilization, were used as sorbents for the solid phase extraction of Cu(II), Fe(III), and Pb(II) prior to their determination by inductively coupled plasma optical emission spectrometry. Adsorption efficiencies of the two sorbents towards metal ions were investigated by batch and column procedures. For both sorbents the preconcentration conditions of analytes including effects of pH, shaking time, sample flow rate and adsorption capacity, were investigated and compared. The differences of silica gel and nanometer SiO₂ in sizes and surface structures resulted in distinct chemical activity and selectivity toward metals. At pH 4, the adsorption capacity of SG-AAEB was found to be 12.2, 14.5 and 9.8 mg g^?1 for Cu(II), Fe(III), and Pb(II), respectively. In comparison, nanometer SiO₂-AAEB showed a high selectivity toward Pb(II) and has a much larger adsorption capacity (22.3 mg g^?1). Furthermore, the application of SG-AAEB and nanometer SiO₂-AAEB for simultaneous preconcentration of trace Cu(II), Fe(III), and Pb(II) from natural samples was performed with satisfactory results.     

H-point standard addition method for simultaneous determination of Fe(II), Co(II) and Cu(II) in micellar media with simultaneous addition of three analytes

H-point standard addition method, HPSAM, with simultaneous addition of three analytes is proposed for the resolution of ternary mixtures. It is a modification of the previously described H-point standard addition method that permits the resolution of three species from a unique calibration set by making the simultaneous addition of the three analytes. The method calculates the analyte concentration from spectral data at two wavelengths where the two species selected as interferents present the same absorbance relationship. These wavelength pairs are easily found, and can be selected to give the most precise results. Diethyldithiocarbomate (DDC) in a cationic micellar solution of cetyltrimethylammonium bromide (CTAB) was used for determination of Fe(II), Co(II) and Cu(II) at pH 5.50. The results showed that simultaneous determination of Fe(II), Co(II) and Cu(II) could be preformed in the range of 0.0–6.0, 0.0–8.0 and 0.0–12.0 μg ml⁻¹, respectively. The proposed method was successfully applied to the simultaneous determination of Fe(II), Co(II) and Cu(II) in several synthetic mixtures containing different concentration of Fe(II), Co(II) and Cu(II).