Epitaxial BaTiO3(100) films on Pt(100): a low-energy electron diffraction, scanning tunneling microscopy, and x-ray photoelectron spectroscopy study

The growth of epitaxial ultrathin BaTiO(3) films on a Pt(100) substrate has been studied by scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and x-ray photoelectron spectroscopy (XPS). The films have been prepared by radio-frequency-assisted magnetron sputter deposition at room temperature and develop a long-range order upon annealing at 900 K in O(2). By adjusting the Ar and O(2) partial pressures of the sputter gas, the stoichiometry was tuned to match that of a BaTiO(3)(100) single crystal as determined by XPS. STM reveals the growth of continuous BaTiO(3) films with unit cell high islands on top. With LEED already for monolayer thicknesses, the formation of a BaTiO(3)(100)-(1 × 1) structure has been observed. Films of 2-3 unit cell thickness show a brilliant (1 × 1) LEED pattern for which an extended set of LEED I-V data has been acquired. At temperatures above 1050 K the BaTiO(3) thin film starts to decay by formation of vacancy islands. In addition (4 × 4) and (3 × 3) surface reconstructions develop upon prolonged heating.     

Pt(111) 表面上表层 Fe (FeO) 结构和次表层 Fe 结构的可控转变

 利用扫描隧道显微镜 (STM) 和 X 射线光电子能谱 (XPS) 对 Pt(111) 表面制备的 Fe 单层薄膜及其在不同环境气氛条件下的多种结构进行了研究. 在温度为 487 K 的 Pt(111) 表面制备出了完整的 Fe 单层薄膜Fe/Pt(111). 对 Fe/Pt(111) 依次升高温度进行超高真空退火, STM 和 XPS 结果表明退火温度高于 800 K 时, 表面 Fe 原子扩散到次表层区域, 形成次表层 Fe 结构Pt/Fe/Pt(111). Pt/Fe/Pt(111) 在 O2 氧化气氛中经 850 K 退火可转变成表面 FeO 薄膜FeO/Pt(111). FeO/Pt(111) 结构在温和的 H2 还原气氛中 (600 K) 转变成表面 Fe 结构, 进一步的还原处理 (800 K) 则可以重新生成 Pt/Fe/Pt(111). 控制样品的环境气氛在 O2 和 H2 之间切换, 使得表面 Fe (FeO) 和次表面 Fe 可以重复地转变. 本研究实现了多种 Fe-Pt 表面结构的可控制备, 可为合理地设计高效、价廉的催化剂提供借鉴.     

One-step covalent grafting of Fe4 single-molecule magnet monolayers on gold

Iron(III)-based single-molecule magnets have been covalently grafted on Au(111) in one step using 1,2-dithiolan-3-yl side groups. Reaction with the substrate quantitatively affords a monolayer of electronically intact clusters doubly linked to the surface via Au-S bonds, as demonstrated by a combination of STM, XAS/XMCD and XPS studies.     

Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111)

The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600K and the molecules were ultimately transformed to carbon clusters at 900K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature.     

Ultrathin TiO(x) films on Pt(111): a LEED, XPS, and STM investigation

Ultrathin ordered titanium oxide films on Pt(111) surface are prepared by reactive evaporation of Ti in oxygen. By varying the Ti dose and the annealing conditions (i.e., temperature and oxygen pressure), six different long-range ordered phases are obtained. They are characterized by means of low-energy electron diffraction (LEED), X-ray photoemission spectroscopy (XPS), and scanning tunneling microscopy (STM). By careful optimization of the preparative parameters, we find conditions where predominantly single phases of TiO(x), revealing distinct LEED pattern and STM images, are produced. XPS binding energy and photoelectron diffraction (XPD) data indicate that all the phases, except one (the stoichiometric rect-TiO2), are one monolayer thick and composed of a Ti-O bilayer with interfacial Ti. Atomically resolved STM images confirm that these TiO(x) phases wet the Pt surface, in contrast to rect-TiO2. This indicates their interface stabilization. At a low Ti dose (0.4 monolayer equivalents, MLE), an incommensurate kagomé-like low-density phase (k-TiO(x) phase) is observed where hexagons are sharing their vertexes. At a higher Ti dose (0.8 MLE), two denser phases are found, both characterized by a zigzag motif (z- and z'-TiO(x) phases), but with distinct rectangular unit cells. Among them, z'-TiO(x), which is obtained by annealing in ultrahigh vacuum (UHV), shows a larger unit cell. When the postannealing of the 0.8 MLE deposit is carried out at high temperatures and high oxygen partial pressures, the incommensurate nonwetting, fully oxidized rect-TiO2 is found The symmetry and lattice dimensions are almost identical with rect-VO2, observed in the system VO(x)/Pd(111). At a higher coverage (1.2 MLE), two commensurate hexagonal phases are formed, namely the w- [(square root(43) x square root(43)) R 7.6 degrees] and w'-TiO(x) phase [(7 x 7) R 21.8 degrees]. They show wagon-wheel-like structures and have slightly different lattice dimensions. Larger Ti deposits produce TiO2 nanoclusters on top of the different monolayer films, as supported both by XPS and STM data. Besides the formation of TiO(x) surfaces phases, wormlike features are found on the bare parts of the substrate by STM. We suggest that these structures, probably multilayer disordered TiO2, represent growth precursors of the ordered phases. Our results on the different nanostructures are compared with literature data on similar systems, e.g., VO(x)/Pd(111), VO(x)/Rh(111), TiO(x)/Pd(111), TiO(x)/Pt(111), and TiO(x)/Ru(0001). Similar and distinct features are observed in the TiO(x)/Pt(111) case, which may be related to the different chemical natures of the overlayer and of the substrate.     

Hierarchical self-assembly of designed 2 x 2-alpha-helix bundle proteins on Au(111) surfaces

Self-assembled monolayers of biomolecules on atomically planar surfaces offer the prospect of complex combinations of controlled properties, e.g., for bioelectronics. We have prepared a novel hemi-4-alpha-helix bundle protein by attaching two alpha-helical peptides to a cyclo-dithiothreitol (cyclo-DTT) template. The protein was de novo designed to self-assemble in solution to form a 4-alpha-helix bundle, whereas the disulfide moiety enables the formation of a self-assembled monolayer on a Au(111) surface by opening of the disulfide, thus giving rise to a two-step self-assembly process. The 2 x 2-alpha-helix bundle protein and its template were studied by X-ray photo electron spectroscopy (XPS), electrochemical methods, and electrochemical in situ scanning tunneling microscopy (in situ STM). XPS showed that the cyclo-DTT opens on adsorption to a gold surface with the integrity of the 2 x 2-alpha-helix bundle proteins retained. The surface properties of the DTT and 2 x 2-alpha-helix bundle protein adlayer were characterized by interfacial capacitance and impedance techniques. Reductive desorption was used to determine the coverage of the adlayers, giving values of 65 and 16 muC cm(-2) for DTT and 2 x 2-helix, respectively. The 2 x 2-alpha-helix bundle protein adlayers were imaged by in situ STM. The images indicated a dense monolayer according with the voltammetric data. No long-range order could be detected, but two clearly distinct STM contrasts were assigned to 2 x 2-alpha-helix bundle protein molecules oriented in parallel and antiparallel conformations. The template molecule DTT alone forms highly ordered 30-40 nm domains, giving an adlayer density which agreed well with the coverage determined by voltammetry. This could be exploited in STM imaging of mixed DTT/2 x 2-alpha-helix bundle protein monolayers, with clearly distinct STM patterns of the two components.     

Structural evolution of perfluoro-pentacene films on Ag(111): transition from 2D to 3D growth

The structural evolution and thermal stability of perfluoro-pentacene (PF-PEN) thin films on Ag(111) have been studied by means of low-temperature scanning tunnelling microscopy (STM), low-energy electron diffraction (LEED), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and thermal desorption spectroscopy (TDS). Well-defined monolayer films can be prepared by utilizing the different adsorption energy of mono- and multilayer films and selectively desorbing multilayers upon careful heating at 380 K, whereas at temperatures above 400 K, a dissociation occurs. In the first monolayer, the molecules adopt a planar adsorption geometry and form a well-ordered commensurate (6 × 3) superstructure where molecules are uniformly oriented with their long axis along the <110> azimuth. This molecular orientation is also maintained in the second layer, where molecules exhibit a staggered packing motif, whereas further deposition leads to the formation of isolated, tall islands. Moreover, on smooth silver surfaces with extended terraces, growth of PF-PEN onto beforehand prepared long-range ordered monolayer films at elevated temperature leads to needle-like islands that are uniformly aligned at substrate steps along <110> azimuth directions.     

Quantitative aspects of the desorption of copper from the silicon (100) surface

The desorption of copper from copper contaminated Si(100) samples has been investigated by thermal desorption spectroscopy (TDS). The samples have been contaminated with aqueous CuSO(4)/EDTA solutions. The amount of copper deposited on the Si surface was in the monolayer region as determined by means of ratio-tracer experiments. The copper is adsorbed on the sample surface in two different states, which could be resolved by TDS. By means of STM and XPS measurements it was possible to assign these two desorption peaks to the desorption of copper from carbon deposits, which had already been present before the contamination process, and to the desorption of copper from the bare Si surface.     

Quantitative aspects of the desorption of copper from the silicon (100) surface

The desorption of copper from copper contaminated Si(100) samples has been investigated by thermal desorption spectroscopy (TDS). The samples have been contaminated with aqueous CuSO₄/EDTA solutions. The amount of copper deposited on the Si surface was in the monolayer region as determined by means of ratio-tracer experiments. The copper is adsorbed on the sample surface in two different states, which could be resolved by TDS. By means of STM and XPS measurements it was possible to assign these two desorption peaks to the desorption of copper from carbon deposits, which had already been present before the contamination process, and to the desorption of copper from the bare Si surface.     

Structural Transformation of Surface-Confined Porphyrin Networks by Addition of Co Atoms

The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423 K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule.     

STM study of morphology and electron transport features in cytochrome c and nanocluster molecule monolayers.

The morphology and electron tunneling through single cytochrome c and nanocluster Pt(5)(CO)(7)[P(C(6)H(5))](4) molecules organized as monolayer Langmuir-Blodgett (LB) films on graphite substrate have been studied experimentally using scanning tunneling microscopy (STM) and spectroscopy techniques with sub-nanometer spatial resolution in a double barrier tunnel junction configuration STM tip-monomolecular film-conducting substrate at ambient conditions. STM images of the films revealed globular structures with characteristic diameters (approximately 3.5 nm for the protein molecule and approximately 1.2 nm for the nanocluster). The spectroscopic study by recording the tunneling current-bias voltage (I-V) curves revealed tunneling I-V characteristics with features as steps of different width and heights that are dependent on the STM tip position over the molecule in the monolayer, giving evidence for sequential discrete electron-tunneling effects with the combination of the single electron Coulomb-charging energy and the electronic energy level separation (molecular spectrum) in such immobilized metalloprotein and nanocluster structures that can be of interest for the development of bioelectronic and hybrid functional nanosystems.     

UHV STM I(V) and XPS studies of aryl diazonium molecules assembled on Si(111)

Molecular layers formed from 4-trifluoromethylbenzenediazonium tetrafluoroborate and 4-Methylbenzenediazonium tetrafluoroborate have been assembled on H-passivated Si(111) and studied by UHV STM and XPS. STM imaging shows well-developed Si(111) step edges and terraces both on Si(111):H and Si(111) substrates covered with a molecular layer. STM I(V) data acquired at different tip-substrate separations reveals a factor of approximately 10 enhancement in current for positive bias voltage when current flows through the 4-trifluoromethyl molecule when compared to the 4-methyl variant. The observed current enhancement in I(V) can be understood by comparing the projected density of states of the two molecule-Si systems calculated using a density functional theory local density approximation after geometry optimization was performed via the conjugate gradient method. XPS data independently confirm that H-passivated Si(111) remains oxygen free for short exposures to ambient conditions and provide evidence that the molecules chemically react with the silicon surface.     

Solvent effects on the adsorption and self-organization of Mn12 on Au(111)

A sulfur-containing single molecule magnet, [Mn12O12(O2CC6H4SCH3)16(H2O)4], was assembled from solution on a Au(111) surface affording both submonolayer and monolayer coverages. The adsorbate morphology and the degree of coverage were inspected by scanning tunneling microscopy (STM), while X-ray photoelectron spectroscopy (XPS) allowed the determination of the chemical nature of the adsorbate on a qualitative and quantitative basis. The properties of the adsorbates were found to be strongly dependent on the solvent used to dissolve the magnetic complex. In particular, systems prepared from tetrahydrofuran solutions gave arrays of isolated and partially ordered clusters on the gold substrate, while samples prepared from dichloromethane exhibited a homogeneous monolayer coverage of the whole Au(111) surface. These findings are relevant to the optimization of magnetic addressing of single molecule magnets on surfaces.     

Directionally oriented LB films of an OPE derivative: assembly, characterization, and electrical properties

Langmuir films have been fabricated from 4-[4'-(4'-thioacetyl-phenyleneethynylene)-phenyleneethynylene]-aniline (NOPES) after cleavage of the thioacetyl protecting group. Characterization by surface pressure vs area per molecule isotherms and Brewster angle microscopy reveal the formation of a high quality monolayer at the air-water interface. One layer Langmuir-Blodgett (LB) films were readily fabricated by the transfer of the NOPES Langmuir film onto solid substrates. X-ray photoelectron spectroscopy (XPS), surface polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS), and quartz crystal microbalance (QCM) experiments conclusively demonstrate the formation of one layer LB films in which the functional group associated with binding to the substrate can be tailored by the film transfer conditions. Using LB methods this molecule could be transferred to gold samples with either the amine or thiol group attached to the gold surface. The amine group is directly attached to the gold substrate (Au-NH(2)-OPE-SH) when the substrate is initially immersed in the subphase and withdrawn during the transfer process; in contrast, monomolecular films in which the thiolate group is attached to the gold substrate (Au-S-OPE-NH(2)) are obtained when the substrate is initially out of the subphase and immersed during the transfer process. The morphology of these films was analyzed by atomic force microscopy (AFM), showing the formation of homogeneous layers. Film homogeneity was confirmed by cyclic voltammetry, which revealed a large passivation of gold electrodes covered by NOPES monolayers. Electrical properties for both polar orientated junctions have been investigated by scanning tunnelling microscopy (STM), with both orientations featuring a nonrectifying behavior.     

Imaging fibrinogen adsorbed on noble metal surfaces with scanning tunneling microscopy: correlation of images with electron spectroscopy for chemical analysis, secondary ion mass spectrometry, and radiolabeling studies

Fibrinogen adsorption on gold and platinum surfaces has been studied with electron spectroscopy for chemical analysis (ESCA), secondary ion mass spectrometry (SIMS), ¹²⁵I labeling, and scanning tunneling microscopy (STM). Stable images of single molecules have been obtained, but are rare. ESCA, SIMS, and labeling studies confirm that absorbed fibrinogen is present on samples at monolayer and submonolayer coverages even when STM images show only a bare substrate. Imaging is more reproducible at high coverages at which single molecules cannot be resolved. Possible explanations for the failure of STM to observe adsorbed fibrinogen molecules are discussed.     

Surface structural and chemical characterization of Pt/Ru composite electrodes: a combined study by XPS, STM and IR spectroscopy

Electrochemical Ru deposits on Pt(111) surfaces are investigated by STM; the images of the Ru-modified surfaces show islands of monoatomic height and between 2–5 nm in diameter. The density of islands on the surface depends on the Ru deposition potential (observed by STM and XRSD) and the cyclic voltammograms indicate an increasing Ru coverage for lower deposition potentials. The Ru surface coverage is determined by ex-situ XPS measurements and a linear dependence of the Ru coverage on the deposition potential is demonstrated. IR spectra of a monolayer of adsorbed CO on the Ru-modified Pt(111) surfaces show distinct bands for CO adsorbed on Pt and on Ru. For the integrated band intensity of the CO/Ru vibration a linear dependence on deposition potential is found indicating that lateral dipole interactions between CO adsorbed on Pt and Ru are unimportant and that the CO coverage on the Ru islands is constant for the Ru coverages investigated. The possibility of using adsorbate vibrational bands for the determination of the coverage of deposits is discussed. Received: 24 June 1996 / Revised: 6 December 1996 / Accepted: 12 December 1996     

Self-assembly of alkanethiol monolayers on Ag-Au(111) alloy surfaces

The self-assembly of ethanethiol (C(2)) and 1-octanethiol (C(8)) on Ag-Au(111) alloy films was studied by X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and scanning tunneling microscopy (STM), to illuminate how the monolayer structures and chemisorption-induced substrate defect structures depend on the alloy composition. The thiolate packing density at saturation increased approximately linearly with increasing Ag ratio. The CV data for reductive desorption of thiolates evidenced predominant or major contributions of Ag atoms to the substrate-sulfur interactions for the alloy surfaces. The STM study supported the lack of elemental periodicity on Ag-Au(111) and the consequent absence of periodicity in substrate-sulfur bonding. For C(8)-covered films, we observed systematic changes of substrate defect structures from elevated monatomic islands on Ag(111) to vacancy island structure on Au(111), in good correlation with the reductive desorption characteristics. The former type of defects can be explained best in terms of breakup of atomic terraces under excess thiolate packing density for Ag(111) and Ag-rich Ag-Au(111). As for the vacancy island formation, the present results are not agreeable with the chemical etching model but compatible with the lattice relaxation model.     

Adsorption and desorption processes of self-assembled monolayers studied by surface-sensitive microscopy and spectroscopy

Adsorption and desorption processes of self-assembled monolayers (SAMs) have been studied on an Au(111) surface by scanning tunnelling microscopy (STM), atomic force microscopy (AFM), X-ray photo-electron spectroscopy (XPS) and thermal desorption spectroscopy (TDS). At the initial growth stage, the ordered nucleation of SAM located at the herringbone turns of the Au(111) − (22 × √3) surface reconstruction and diffusion-controlled domain formation have been imaged by STM and AFM. Details of the oxidation process in UV desorption were also investigated by XPS. In addition, the dimerization reaction during desorption was confirmed by TDS for the first time in the alkanethiol SAM system.