苯基丙氨酸修饰石墨烯平面电极对西酞普兰的灵敏检测

通过高分子支撑法,将化学气相沉积(CVD)法得到的石墨烯从铜基底转移到聚对苯二甲酸乙二醇(PET)基底上,制备出柔性石墨烯平面电极(GPE),再通过循环伏安法将苯基丙氨酸(PHE)沉积到GPE上,得到了苯基丙氨酸修饰的石墨烯平面电极(PHE/GPE)。研究表明,治疗抑郁症的药物西酞普兰(CIT)在PHE/GPE上有明显的氧化峰出现,从而构建一种新型CIT传感器。该传感器在CIT浓度为0.5～88μmol/L范围内,其响应电流与浓度分段呈现良好的线性关系,检出限(S/N=3)为0.044μmol/L。该CIT传感器具有制备过程简单、成本低,对CIT响应灵敏、检出限低等优点。     

柔性石墨烯平面电极对多巴胺的灵敏检测

将化学气相沉积(CVD)制备的石墨烯转移到柔性的聚对苯二甲酸乙二醇酯(PET)上,构建了一种石墨烯平面电极(GPE)。通过恒电位法在GPE表面修饰金纳米颗粒(AuNPs),得到金纳米颗粒修饰石墨烯平面电极(AuNPs/GPE)。用扫描电子显微镜(SEM)、能谱仪(EDS)、高分辨透射电子显微镜(HR-TEM)、X射线衍射(XRD)和拉曼光谱对此电极进行了表征。在AuNPs/GPE上,多巴胺(DA)呈现出一对良好的氧化/再还原峰。从而构建了一种新型DA传感器。DA浓度在0.1~150.0μmol/L和150.0~400.0μmol/L范围内,传感器响应电流与DA浓度分段呈现良好的线性关系,检出限为3.9 nmol/L(S/N=3)。此传感器具有响应时间短、稳定性良好、抗干扰能力强、制作成本低、制备简单等优点。     

基于钴铝水滑石/铁氰化钴的无酶葡萄糖传感器的研究

采用电沉积的方法将铁氰化钴(CoHCF)和钴铝水滑石(CoAl-LDH)共同固载于玻碳电极(GCE)表面构筑CoAl-LDH/CoHCF纳米材料修饰电极,并利用CoAl-LDH和CoHCF两种物质在碱性环境中对葡萄糖的协同电催化氧化作用,将其用于葡萄糖的分析。采用扫描电镜对电化学沉积的CoHCF和CoAlLDH的表面形貌进行了表征,利用X射线能量色散谱(EDS)对电沉积的CoAlLDH/CoHCF复合材料进行了分析。采用循环伏安法(CV)对修饰电极催化氧化葡萄糖的行为进行了研究。利用电流-时间法对CoAl-LDH/GCE,CoHCF/GCE,CoAl-LDH/CoHCF/GCE和裸GCE等4种电极对葡萄糖的催化效果进行了对照。对底液NaOH的浓度和扫速对电极的影响进行了探讨。该传感器对葡萄糖在5.0×10–7~6.46×10–4mol/L范围内呈良好的线性响应,相关系数为0.9996,灵敏度为0.13 A·L·mol-1,检出限(S/N=3)为2.1×10–7mol/L。     

铁氰化钴/树状高分子修饰电极免标记法检测基因突变

利用铁氰化钴/树状高分子(CoHCF/PAMAM)复合材料修饰玻碳电极(GCE), 制备了免标记检测基因突变的新型DNA电化学传感器. 传感器中树状高分子层明显增加了单链DNA探针的固定量, 铁氰化钴层增大了鸟嘌呤的氧化信号, 该传感器可以灵敏识别单碱基错配的基因序列, 具有良好的选择性和灵敏度. 在7.6×10^-11～3.05×10^-8 mol/L浓度范围内, 鸟嘌呤(G)的氧化峰电流差值与突变基因浓度呈良好的线性关系, 检出限为1.0×10^-11 mol/L(S/N=3).     

电还原氧化石墨烯-铁氰化钴修饰电极对肼的测定

本文提出了一种新的水合肼的测定方法。利用静电作用,在氧化石墨烯(GO)表面吸附一层均匀分散的Co2+形成GO-Co2+复合物,通过恒电位法电还原复合物中的GO,再利用循环伏安法将吸附的Co2+转化为铁氰化钴(CoHCF),制得电还原的氧化石墨烯-铁氰化钴修饰玻碳电极(ERGO-CoHCF/GCE)。采用扫描电子显微镜(SEM)对修饰电极表面进行了表征。研究了水合肼在该修饰电极上的电化学行为及在不同电极上的电流响应。结果表明:ERGO-CoHCF/GCE对肼具有很好的电催化氧化作用,其浓度与氧化峰电流呈良好的线性关系。     

以碳纳米管为支撑电沉积制备高电活性与电催化性能的六氰合铁酸钴纳米多孔薄膜

以碳纳米管(MWNTs)修饰的碳糊电极为基底电极,通过电沉积方法制备了六氰合铁酸钴(CoHCF)纳米多孔生物传感平台。考察了MWNTs对CoHCF沉积的影响,优化了CoHCF沉积的各种实验条件(0.5mol/L KCl,1 mmol/L CoCl2和0.9 mmol/L K3Fe(CN)6混合溶液,在循环伏安电压范围0～1.1 V内扫20圈,扫速100 mV/s),借助循环伏安法、交流阻抗法和扫描电镜法对修饰电极进行了表征。由于MWNTs的支撑作用,电沉积得到的CoHCF呈现出多孔结构和良好的电化学稳定性。具有纳米多孔结构的MWNTs-CoHCF薄膜能有效地促进生物小分子在电极上的电子交换,维生素B2在纳米多孔CoHCF/MWNTs上具有优异的氧化还原行为,其测定线性范围为1.2×10-7～2.6×10-7mol/L,检出限为8.9×10-8mol/L。     

电沉积法制备铁氰化铈/Nafion复合物纳米颗粒及其对多巴胺电催化氧化性能的研究

采用电沉积法沉积铁氰化铈(CeHCF)纳米颗粒,在Nafion修饰的玻碳电极表面电沉积致密的、分散性良好的铁氰化铈纳米粒子。用场发射扫描电子显微镜(FE-SEM)对铁氰化铈纳米颗粒的形貌进行了表征。利用循环伏安法(CV)研究了多巴胺在铁氰化铈/Nafion修饰玻碳电极(CeHCF/NF/GCE)表面上的电化学行为。研究表明,CeHCF/NF/GCE对多巴胺具有良好的电催化氧化作用,该传感器对多巴胺在一定浓度下呈良好的线性关系,其线性范围是1.0×10~(-7)~3.4×10~(-4)mol/L。检测限为0.2×10~(-7)mol/L(S/N=3)。     

氧化石墨烯/铁氰化铈修饰玻碳电极同时测定扑热息痛和咖啡因

采用滴涂法和电沉积法制备了氧化石墨烯/铁氰化铈(CeFe(CN)6)纳米复合膜修饰玻碳电极。用扫描电镜对氧化石墨烯和氧化石墨烯/CeFe(CN)6纳米复合膜进行了表征。分别用循环伏安法和差分脉冲伏安法研究了扑热息痛和咖啡因在修饰电极上的电化学行为。结果表明,在0.1 mol/L醋酸盐缓冲溶液(pH5.0)中,扑热息痛和咖啡因在此修饰电极上具有良好的电化学行为,扑热息痛和咖啡因分别在1.0×10-7～6.0×10-5mol/L和1.0×10-6～1.3×10-4mol/L浓度范围内与电化学响应信号呈良好的线性关系,相关系数分别为0.990和0.992;信噪比为3时,扑热息痛和咖啡因检出限分别为5.0×10-8mol/L和5.2×10-7mol/L。将本方法用于人尿样品分析,回收率为96.1%～105.4%。     

石墨烯/铁氰化钴复合膜修饰玻碳电极同时测定对苯二酚、邻苯二酚和间苯二酚

采用滴涂法和电沉积法制备了石墨烯/铁氰化钴复合膜修饰玻碳电极. 用扫描电镜对该纳米复合膜进行了表征.用循环伏安法研究了对苯二酚(HQ)、邻苯二酚(CT)和间苯二酚(RS)在修饰电极上的电化学行为. 实验结果表明, 相对于裸玻碳电极和石墨烯修饰电极, HQ, CT 和RS 在石墨烯/铁氰化钴修饰电极上的氧化峰电流显著提高. 利用差分脉冲伏安法测定, HQ, CT 和RS 分别在1.0×10^－6～1.5×10^－4 mol/L, 1.0×10^－6～2.0×10^－4 mol/L 和3.5×10^－6～2.5×10^－4 mol/L浓度范围内与氧化峰电流呈良好的线性关系, 相关系数分别为0.991, 0.993 和0.992. 信噪比为3 时, HQ, CT 和RS 检出限分别为2.0×10^－7, 2.1×10^－7 和3.5×10^－7 mol/L. 将该方法用于水样分析, 回收率为95.6%～106.1%.     

铁氰化铈薄膜固载血红蛋白修饰的过氧化氢生物传感器的制备及性能

采用电化学沉积法将铁氰化铈(CeHCF)薄膜修饰于玻碳电极(GCE)表面,得到铁氰化铈薄膜修饰玻碳电极;将血红蛋白(Hb)固载于该修饰电极表面,成功制得了Hb/CeHCF/GCE过氧化氢生物传感器.考察了铁氰化铈薄膜修饰玻碳电极的氧化还原机理和制备条件,并对血红蛋白在电极上的电子传递过程进行了较为深入的研究.结果表明,铁氰化铈薄膜为血红蛋白提供了温和的固载环境,可实现血红蛋白与电极表面的直接电子转移,提高了血红蛋白的电化学活性;所制得的传感器对过氧化氢具有较高的催化响应和较强的稳定性.相关研究结果在生物医学和临床医学领域具有一定的借鉴意义.     

基于石墨烯基复合物和聚天青Ⅰ的HRP传感器检测有机过氧化物的研究

利用电化学还原氧化石墨烯(GO)的方法将石墨烯(rGO)固定在电极表面上,然后电沉积氢氧化铜和氢氧化镍复合物,构成石墨烯/金属氢氧化物复合纳米材料修饰的玻碳电极(GCE),并通过电聚合天青Ⅰ将辣根过氧化酶(HRP)固定在GCE/rGO/Cu(OH)_2-Ni(OH)_2表面,制得GCE/rGO/Cu(OH)_2-Ni(OH)_2/HRP-PA。对石墨烯/金属氢氧化物复合纳米材料进行了SEM和能谱表征。通过电化学阻抗法和循环伏安法对传感器的制备过程和电化学性能进行了研究,并进一步分别对过氧化氢叔丁基(BHP)及过氧化氢异丙苯(CHP)进行了分析测定。该传感器对BHP和CHP具有良好的检测效果,在2.0×10~(-5)~9.2×10~(-4)mol/L范围内响应电流与BHP浓度呈良好的线性关系,检出限为9.9×10~(-6)mol/L;在3.0×10~(-6)~1.0×10~(-4)mol/L范围内响应电流与CHP浓度呈良好的线性关系,检出限为6.9×10~(-7)mol/L。     

磁性石墨烯修饰辛基酚印迹传感器制备及应用研究

以辛基酚(4-OP)为模板分子,多巴胺为功能单体,采用电聚合技术在磁性石墨烯修饰碳电极表面制备对辛基酚具有高选择性与灵敏性的印迹电化学传感器。采用循环伏安法(CV)和差分脉冲伏安法(DPV)对此印迹传感器的电化学性能进行详细表征;采用扫描电子显微技术对修饰电极的形貌进行表征。结果表明,此印迹电化学传感器对辛基酚具有良好的特异识别性能。采用 DPV 法考察了孵化时间和洗脱溶剂对印迹传感器性能影响,结果表明,最佳孵化时间为14 min。此印迹电化学传感器的响应电流(△IR )与辛基酚在5.0×10-6~5.0×10-9 mol/ L 范围内浓度的负对数(-lgC)呈良好的线性关系,线性方程为△IR ( mA)=-0.25lgC(mol/ L)+2.35,检出限为3.64×10-10 mol/ L (S/ N=3)。此印迹电化学传感器对辛基酚具有良好的选择性和灵敏性,成功用于实际水样中辛基酚的检测,回收率为96.0%~104.0%。     

Study of carbon nanotubes-HRP modified electrode and its application for novel on-line biosensors

In this paper, multi-walled carbon nanotubes (MWCNTs) were successfully immobilized on the surface of a glassy carbon electrode by mixing with horse-radish peroxidase (HRP). The electrochemical behavior of H2O2 was also studied with the MWCNTs-HRP modified electrode as a working electrode. The MWCNTs-HRP modified electrode showed excellent response of reduction current for the determination of H2O2 at the potential of -300 mV (vs. Ag/AgCl). We assembled the MWCNTs-HRP modified electrode in a thin-layer flow cell and the H2O2 solution was continuously introduced into the cell with a syringe pump. We optimized the sensitivity of the H2O2 sensor by adjusting the working potential and the pH of the buffer solution. The peak current increased linearly with the concentration of H2O2 in the range 3.0 x 10(-7) to approximately 2.0 x 10(-4) mol L(-1). The detection limit is 1.0 x 10(-7) mol L(-1) (S/N = 3). The interferences from ascorbic acid, uric acid and other electroactive substances can be greatly excluded since the sensor can be operated at -300 mV. Stability and reproducibility of the MWCNTs-HRP chemically modified electrode were also studied in this paper. Fabricated with glucose and lactate oxidase, the MWCNTs-HRP electrode was also applied to prepare the on-line glucose and lactate biosensors because of the high sensitivity for the determination of H2O2.     

Effects of a Surfactant on the Electrocatalytic Activity of Cobalt Hexacyanoferrate Modified Glassy Carbon Electrode Towards the Oxidation of Dopamine

The cobalt hexacyanoferrate film (CoHCF) was deposited on the surface of a glassy carbon (GC) electrode with a potential cycling procedure in the presence and absence of the cationic surfactant, cetyl trimethylammonium bromide (CTAB), to form CoHCF modified GC (CoHCF/GC) electrode. It was found that CTAB would affect the growth of the CoHCF film, the electrochemical behavior of the CoHCF film and the electrocatalytic activity of the CoHCF/GC electrode towards the electrochemical oxidation of dopamine (DA). The reasons of the electrochemical behavior of CoHCF/GC electrode influenced by CTAB were investigated using FTIR and scanning electron microscope (SEM) techniques. The apparent rate constant of electrocatalytic oxidation of DA catalyzed by CoHCF was determined using the rotating disk electrode measurements.     

纳米银/石墨烯修饰电极测定青蒿素

本文建立一种新型的青蒿素传感器。首先,在玻碳电极上滴涂氧化石墨,通过电化学方法将氧化石墨还原为石墨烯,然后,在石墨烯上沉积纳米银得到石墨烯/纳米银修饰电极,它作为检测青蒿素的电化学传感器。用此电极对青蒿素进行测定,并通过循环伏安法、差分脉冲伏安法、交流阻抗法等研究其电化学行为。该修饰电极在测定青蒿素溶液时,表现出较正的还原电位和较大的峰电流等优势;对其实验条件如电解质溶液的p H、应用电势等进行了探查,该电化学传感器在青蒿素溶液浓度范围为1.0×10-8~3.0×10-5mol/L时与其还原峰电流呈现良好的线性关系,最低检出限为1.2×10-9mol/L(S/N=3)。此外,对该传感器的稳定性和重现性等也进行了研究,获得令人满意的结果。     

Electrocatalytic Oxidation of Calcium Folinate on Carboxyl Graphene Modified CuxO/Cu Electrode

Carboxyl graphene modified Cu_xO/Cu electrode was fabricated. The bare copper electrode was firstly anodic polarized in 1.0 mol/L NaOH solution in order to get Cu_xO nanoparticles, then the carboxyl graphene (CG) was electrodeposited on the Cu_xO/Cu electrode by cyclic potential sweeping. The electrocatalytic oxidation behaviors of calcium folinate (CF) at the graphene modified Cu_xO/Cu electrode were investigated by cyclic voltammetry. A positive scan polarization reverse catalytic voltammetry was used to obtain the pure catalytic oxidation current. The graphene modified Cu_xO/Cu electrode was served as the electrochemical sensor of CF, a highly sensitivity of 22.0 μA·(μmol/μL)^-1cm^-2 was achieved, and the current response was linear with increasing CF concentration in the range of 2.0×10^-7 mol/L to 2.0×10^-5 mol/L, which crossed three orders of magnitude, and the detection limit was found 7.6×10^-8 mol/L (S/N=3). In addition, the proposed sensor was successfully applied in determination of CF in drug sample.     

A high-sensitive amperometric hydrogen peroxide biosensor based on the immobilization of hemoglobin on gold colloid/L-cysteine/gold colloid/nanoparticles Pt-chitosan composite film-modified platinum disk electrode

A hemoglobin (Hb)/gold colloid (nano-Au)/L-cysteine (L-cys)/nano-Au/nanoparticles Pt (nano-Pt)-chitosan (CHIT) composite film-modified platinum disk electrode (abbreviated to modified electrode) has been prepared to construct a biosensor for determination of H(2)O(2). The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The morphologies of different composite film were investigated with scanning electron microscopy (SEM) and the element of composite film was investigated with X-ray photoelectron spectroscopy (XPS). Analytical parameters such as pH and temperature were also studied. The linear range for the determination of H(2)O(2) is 1.4 x 10(-7) to 6.6 x 10(-3)mol/L with a detection limit of 4.5 x 10(-8)mol/L (S/N=3). The sensor achieved 95% of the steady-state current within 10s. The sensor exhibited high sensitivity (17.62 microA/(mmol L)), selectivity and stability. The method is applied to the determination of H(2)O(2) with satisfactory results.     

血红蛋白在TiO2-石墨烯/离子液体/壳聚糖纳米复合膜修饰电极上的直接电化学

基于TiO2-石墨烯、离子液体和壳聚糖复合膜修饰玻碳电极制备了一种新型的电化学传感器。用循环伏安法研究了血红蛋白在该修饰电极上的直接电化学行为。结果表明,该纳米复合膜能有效地促进血红蛋白在电极上的直接电子转移,保持其生物催化活性。该传感器对H2O2具有良好的催化性能。H2O2的电流响应信号与其浓度在20～860μmol/L范围内呈良好的线性关系,检出限为0.1μmol/L(S/N=3)。传感器具有良好的稳定性和重现性。     

PB/Au/CILE的制备与应用

混合离子液体(N-丁基吡啶六氟磷酸盐,[BuPy][PF6])与石墨粉,制备了离子液体碳糊电极(CILE),再采用电沉积法制得PB/Au/CILE修饰电极,研究了该修饰电极的电化学行为及其对H2O2的电催化,建立了H2O2的计时安培测定新方法。结果表明:在该修饰电极上PB产生了一对准可逆的氧化还原峰,并对H2O2表现出良好电催化作用,安培法测定H2O2的线性范围为5.0×10-6～1.55×10-4mol/L,检出限为1.0×10-6mol/L(S/N=3)。连续10次测定5.0×10-6mol/L H2O2峰电流的RSD为2.1%。     

A non-enzymatic sensor for hydrogen peroxide based on polyaniline, multiwalled carbon nanotubes and gold nanoparticles modified Au electrode

We describe the construction of a polyaniline (PANI), multiwalled carbon nanotubes (MWCNTs) and gold nanoparticles (AuNPs) modified Au electrode for determination of hydrogen peroxide without using peroxidase (HRP). The AuNPs/MWCNT/PANI composite film deposited on Au electrode was characterized by Scanning Electron Microscopy (SEM) and electrochemical methods. Cyclic voltammetric (CV) studies of the electrode at different stages of construction demonstrated that the modified electrode had enhanced electrochemical oxidation of H(2)O(2), which offers a number of attractive features to develop amperometric sensors based on split of H(2)O(2). The amperometric response to H(2)O(2) showed a linear relationship in the range from 3.0 μM to 600.0 μM with a detection limit of 0.3 μM (S/N = 3) and with high sensitivity of 3.3 mA μM(-1). The sensor gave accurate and satisfactory results, when employed for determination of H(2)O(2) in milk and urine.