Development of a microbial biosensor based on carbon nanotube (CNT) modified electrodes

Pseudomonas putida DSM 50026 cells were used as the biological component and the measurement was based on the respiratory activity of the cells estimated from electrochemical measurements. The cells were immobilised on carbon nanotube (CNT) modified carbon paste electrodes (CPE) by means of a redox osmium polymer, viz. poly(1-vinylimidazole)₁₂-[Os-(4,4′-dimethyl-2,2′-dipyridyl)₂Cl₂]^2+/+. The osmium polymer efficiently shuttles electrons between redox enzymes located in the cell wall of the cells and promotes a stable binding to the electrode surface. The effect of varying the amounts of CNT and osmium polymer on the response to glucose was investigated to find the optimum composition of the sensor. The effects of pH and temperature were also examined. After the optimisation studies, the system was characterised by using glucose as substrate. Moreover, the microbial biosensor was also prepared by using phenol adapted bacteria and then, calibrated to phenol. After that, it was applied for phenol detection in an artificial waste water sample.     

Electronic modification of the [Ru(II)(tpy)(bpy)(OH(2))](2+) scaffold: effects on catalytic water oxidation

The mechanistic details of the Ce(IV)-driven oxidation of water mediated by a series of structurally related catalysts formulated as [Ru(tpy)(L)(OH(2))](2+) [L = 2,2'-bipyridine (bpy), 1; 4,4'-dimethoxy-2,2'-bipyridine (bpy-OMe), 2; 4,4'-dicarboxy-2,2'-bipyridine (bpy-CO(2)H), 3; tpy = 2,2';6',2'-terpyridine] is reported. Cyclic voltammetry shows that each of these complexes undergo three successive (proton-coupled) electron-transfer reactions to generate the [Ru(V)(tpy)(L)O](3+) ([Ru(V)=O](3+)) motif; the relative positions of each of these redox couples reflects the nature of the electron-donating or withdrawing character of the substituents on the bpy ligands. The first two (proton-coupled) electron-transfer reaction steps (k(1) and k(2)) were determined by stopped-flow spectroscopic techniques to be faster for 3 than 1 and 2. The addition of one (or more) equivalents of the terminal electron-acceptor, (NH(4))(2)[Ce(NO(3))(6)] (CAN), to the [Ru(IV)(tpy)(L)O](2+) ([Ru(IV)=O](2+)) forms of each of the catalysts, however, leads to divergent reaction pathways. The addition of 1 eq of CAN to the [Ru(IV)=O](2+) form of 2 generates [Ru(V)=O](3+) (k(3) = 3.7 M(-1) s(-1)), which, in turn, undergoes slow O-O bond formation with the substrate (k(O-O) = 3 × 10(-5) s(-1)). The minimal (or negligible) thermodynamic driving force for the reaction between the [Ru(IV)=O](2+) form of 1 or 3 and 1 eq of CAN results in slow reactivity, but the rate-determining step is assigned as the liberation of dioxygen from the [Ru(IV)-OO](2+) level under catalytic conditions for each complex. Complex 2, however, passes through the [Ru(V)-OO](3+) level prior to the rapid loss of dioxygen. Evidence for a competing reaction pathway is provided for 3, where the [Ru(V)=O](3+) and [Ru(III)-OH](2+) redox levels can be generated by disproportionation of the [Ru(IV)=O](2+) form of the catalyst (k(d) = 1.2 M(-1) s(-1)). An auxiliary reaction pathway involving the abstraction of an O-atom from CAN is also implicated during catalysis. The variability of reactivity for 1-3, including the position of the RDS and potential for O-atom transfer from the terminal oxidant, is confirmed to be intimately sensitive to electron density at the metal site through extensive kinetic and isotopic labeling experiments. This study outlines the need to strike a balance between the reactivity of the [Ru═O](z) unit and the accessibility of higher redox levels in pursuit of robust and reactive water oxidation catalysts.     

Multilayer assembly of calf thymus DNA and poly(4-vinylpyridine) derivative bearing [Os(bpy)(2)Cl](2+): redox behavior within DNA film

Polyelectrolyte multilayer (PEM) films containing polycationic osmium (Os) bipyridyl (bpy) complex-attached poly(4-vinylpyridine) (PVP) derivative [Os(bpy)(2)Cl](2+)-PVP (Os-PVP) and polyanionic calf thymus DNA (CT-DNA) on the surface of gold (Au) electrodes were prepared using a layer-by-layer self-assembly method, and their redox properties were studied. Os complex shows different redox behavior with CT-DNA film in comparison with other PEM film which is composed of ordinary polymers. A cyclic voltammetric study suggested that the outermost polyanionic DNA layer does not hinder the redox reaction of Os complex within the Os-PVP/CT-DNA multilayer film, which may be helpful to understand the electron transfer mechanism with the DNA film. For all the Os-complex-containing PEM layers studied, a diffusion-free electron transfer from the Os complex moieties in these films to the electrode surface was observed. An electrocatalytic oxidation of ascorbic acid (AA) by this DNA-containing PEM film-covered electrode was also proposed.     

Redox-driven intramolecular anion translocation between a metal centre and a hydrogen-bond-donating compartment

Dicationic ligands incorporating two 2,2'-bipyridine units and two imidazolium moieties, [1](2+) and [2](2+), form stable chelate complexes with Cu(II) and Cu(I) in acetonitrile solution. Each Cu(II) complex binds two X(-) ions according to two stepwise equilibria, the first involving the Cu(II) centre and the second involving the bis-imidazolium compartment. Cu(I) complexes are able to host only one NO(3)(-) ion in the bis-imidazolium cavity, while other anions induce demetallation. Thus, in the presence of one equivalent of NO(3)(-), the Cu(II)/Cu(I) redox change makes the anion translocate quickly and reversibly from one binding site to the other within the [Cu(II,I)(1)](4+/3+) system, as demonstrated by cyclic voltammetry and controlled-potential electrolysis experiments.     

Effect of spin-orbit coupling on reduction potentials of octahedral ruthenium(II/III) and osmium(II/III) complexes

Reduction potentials of several M(2+/3+) (M = Ru, Os) octahedral complexes, namely, [M(H2O)6](2+/3+), [MCl6](4-/3-), [M(NH3)6](2+/3+), [M(en)3](2+/3+) [M(bipy)3](2+/3+), and [M(CN)6](4-/3-), were calculated using the CASSCF/CASPT2/CASSI and MRCI methods including spin-orbit coupling (SOC) by means of first-order quasi-degenerate perturbation theory. It was shown that the effect of SOC accounts for a systematic shift of approximately -70 mV in the reduction potentials of the studied ruthenium (II/III) complexes and an approximately -300 mV shift for the osmium(II/III) complexes. SOC splits the sixfold-degenerate (2)T(2g) ground electronic state (in ideal octahedral symmetry) of the M(3+) ions into the E((5/2)g) Kramers doublet and G((3/2)g) quartet, which were calculated to split by 1354-1573 cm(-1) in the Ru(3+) complexes and 4155-5061 cm(-1) in the Os(3+) complexes. It was demonstrated that this splitting represents the main contribution to the stabilization of the M(3+) ground state with respect to the closed-shell (1)A(1g) ground state in M(2+) systems. Moreover, it was shown that the accuracy of the calculated reduction potentials depends on the calculated solvation energies of both the oxidized and reduced forms. For smaller ligands, it involves explicit inclusion of the second solvation sphere into the calculations, whereas implicit solvation models yield results of sufficient accuracy for complexes with larger ligands. In such cases (e.g., [M(bipy)3](2+/3+) and its derivatives), very good agreement between the calculated (SOC-corrected) values of the reduction potentials and the available experimental values was obtained. These results led us to the conclusion that especially for Os(2+/3+) complexes, inclusion of SOC is necessary to avoid systematic errors of approximately 300 mV in the calculated reduction potentials.     

Comparison of the self-exchange and interfacial charge-transfer rate constants for methyl- versus tert-butyl-substituted Os(III) polypyridyl complexes

Differences in the self-exchange and interfacial electron-transfer rate constants have been evaluated for a relatively unhindered Os(III/II) redox system, osmium(III/II) tris(4,4'-di-methyl-2,2'-bipyridyl), [Os(Me2bpy)3]3+/2+, relative to those of a relatively hindered system, osmium(III/II) tris(4,4'-di-tert-butyl-2,2'-bipyridyl), [Os(t-Bu2bpy)3]3+/2+. In contrast to the predicted increase in rate constant by a factor of 2-3 due to the difference in reorganization energy of the two complexes, introduction of the tert-butyl functionality decreased the self-exchange rate constant, as measured by NMR line-broadening techniques, by a factor of approximately 50 as compared to that of the analogous methyl-substituted osmium complex. Steady-state current density versus potential measurements, in conjunction with differential capacitance versus potential measurements, were used to compare the interfacial electron-transfer rate constants at n-type ZnO electrodes of [Os(t-Bu2bpy)3]3+/2+ and [Os(Me2bpy)3]3+/2+. The interfacial electron-transfer rate constant for the reduction of [Os(t-Bu2bpy)3]3+ was 100 times smaller than that for [Os(Me2bpy)3]3+. The results indicate that the tert-butyl group can act as a spacer on an outer-sphere redox couple and significantly decrease the electronic coupling of the electron-transfer reaction in both self-exchange and interfacial electron-transfer processes.     

Construction of pha-operon-defined knockout mutants of Pseudomonas putida KT2442 and their applications in poly(hydroxyalkanoate) production

Pseudomonas putida KT2442 could accumulate medium-chain-length poly(hydroxyalkanoate)s (PHA) consisting of 3-hydroxyhexanoate, 3-hydroxyoctanoate, 3-hydroxydecanoate, and 3-hydroxydodecanoate from a wide range of carbon sources. In this study, the PHA synthase pha operon (phaC1-phaZ-phaC2) was knocked out and the vgb gene encoding vitreoscilla hemoglobin protein (VHb), which could enhance oxygen uptake rate especially at low oxygen concentration, was integrated into the P. putida KT2442 genome to replace the deleted fragment. The resulting mutant P. putida KTOY01 or gene-replaced mutant KTOY02 was used as the host to study PHA synthase properties and PHA production. Different PHA polymerase (PhaC) genes, phaC(Re) from Rastonia eutropha H16, phaC(Ac) from Aeromonas cavie, and phaC2(Ps) from Pseudomonas stutzeri 1317, were expressed in the mutant strains to test the PhaC enzyme substrate specificity. The result showed P. putida KTOY01 or KTOY02 could provide not only mcl PHA monomers but also 3-hydroxybutyrate from fatty acids, which may allow the production of copolyesters poly(3HB-co-mcl 3HA). Plasmid pCJY10 containing phaC2(Ps), phbA, and phbB genes encoding PHA polymerase, beta-ketothiolase, and acetoacetyl-CoA reductase, respectively, were transformed into P. putida KTOY01 and KTOY02. Shake-flask culture showed P. putida KTOY01 or KTOY02 (pCJY10) could accumulate poly(3HB-co-mcl 3HA) from glucose. The above result showed pha operon knockout mutant of P. putida KT2442 was a very useful host of great potential not only for studying PhaC synthase, but also for microbial production of copolyesters poly(3HB-co-mcl 3HA), which is very difficult to obtain.     

Surface confinement and its effects on the luminescence quenching of a ruthenium-containing metallopolymer

Luminescence quenching of the metallopolymers [Ru(bpy)(2)(PVP)(10)](2+) and [Ru(bpy)(2)(PVP)(10)Os(bpy)(2)](4+), both in solution and as thin films, is reported, where bpy is 2,2'-bipyridyl and PVP is poly(4-vinylpyridine). When the metallopolymer is dissolved in ethanol, quenching of the ruthenium excited state, Ru(2+*), within [Ru(bpy)(2)(PVP)(10)](2+) by [Os(bpy)(3)](2+) proceeds by a dynamic quenching mechanism and the rate constant is (1.1 +/- 0.1) x 10(11) M(-1) s(-1). This quenching rate is nearly two orders of magnitude larger than that found for quenching of monomeric [Ru(bpy)(3)](2+) under the same conditions. This observation is interpreted in terms of an energy transfer quenching mechanism in which the high local concentration of ruthenium luminophores leads to a single [Os(bpy)(3)](2+) centre quenching the emission of several ruthenium luminophores. Amplifications of this kind will lead to the development of more sensitive sensors based on emission quenching. Quenching by both [Os(bpy)(3)](2+) and molecular oxygen is significantly reduced within a thin film of the metallopolymer. Significantly, in both optically driven emission and electrogenerated chemiluminescence, emission is observed from both ruthenium and osmium centres within [Ru(bpy)(2)(PVP)(10)Os(bpy)(2)](4+) films, i.e. the ruthenium emission is not quenched by the coordinated [Os(bpy)(2)](2+) units. This observation opens up new possibilities in multi-analyte sensing since each luminophore can be used to detect separate analytes, e.g. guanine and oxoguanine.     

Synthesis and DNA binding of novel water-soluble cationic methylcobalt porphyrins

Organocobalt derivatives of tetracationic water-soluble porphyrins are difficult to prepare via the typical reductive alkylation of the Co(II)(por) (porH(2) = porphyrin ligand). None have been reported. The problem may arise because the porphyrin core is made relatively electron poor by the positively charged peripheral groups. We have circumvented this problem by using the [Co(III)(NH(3))(5)CH(3)](2+) reagent, which inserts the Co(III)-CH(3) moiety directly into porH(2) in water under basic conditions. The method afforded two new [CH(3)Co(por)](4+) derivatives, [CH(3)CoTMpyP(4)](4+) and [CH(3)CoTMAP](4+), where [TMpyP(4)](4+) and [TMAP](4+) are the coordinated, NH-deprotonated forms of meso-tetrakis(N-methyl-4-pyridiniumyl)porphyrin and meso-tetrakis(N,N,N-trimethylaniliniumyl)porphyrin, respectively. The binding of the two new [CH(3)Co(por)](4+) cations to DNA and to the synthetic DNA polymers [poly(dA-dT)](2) and [poly(dG-dC)](2) was studied. Using published criteria by which changes in DNA viscosity and in the visible and CD spectra in the Soret region can be used to assess DNA binding, we conclude that both are outside binders. A large hypochromicity of the Soret bands of the [CH(3)Co(por)](4+) cations observed upon outside binding to DNA may indicate a high degree of self-stacking. The visible absorption and CD spectra of the [CH(3)Co(por)](4+) cations in the presence of 1:1 mixtures of [poly(dA-dT)](2) and [poly(dG-dC)](2) are nearly identical to those with [poly(dA-dT)](2) alone and are very different from those of [poly(dG-dC)](2) alone. Thus, both cations show a high preference for outside binding at AT-rich over GC-rich DNA sites. Upon binding of each of the [CH(3)Co(por)](4+) cations to all of the DNA polymers, the Soret bands exhibit blue shifts, whereas the Soret bands of the corresponding [(H(2)O)(2)Co(por)](5+) cations exhibit red shifts. The blue shifts strongly suggest that the [CH(3)Co(por)](4+) cations, particularly [CH(3)CoTMAP](4+), become five-coordinate forms to some extent on DNA binding; this result is the first good evidence for the presence at equilibrium of five-coordinate CH(3)Co(III)(N(4)) forms in water.     

Catalytic four-electron oxidation of water by intramolecular coupling of the oxo ligands of a bis(ruthenium-bipyridine) complex

A bis(ruthenium-bipyridine) complex bridged by 1,8-bis(2,2':6',2'-terpyrid-4'-yl)anthracene (btpyan), [Ru(2)(μ-Cl)(bpy)(2)(btpyan)](BF(4))(3) ([1](BF(4))(3); bpy = 2,2'-bipyridine), was prepared. The cyclic voltammogram of [1](BF(4))(3) in water at pH?1.0 displayed two reversible [Ru(II),Ru(II)](3+)/[Ru(II),Ru(III)](4+) and [Ru(II),Ru(III)](4+)/[Ru(III),Ru(III)](5+) redox couples at E(1/2)(1) = +0.61 and E(1/2)(2) = +0.80?V (vs. Ag/AgCl), respectively, and an irreversible anodic peak at around E = +1.2?V followed by a strong anodic currents as a result of the oxidation of water. The controlled potential electrolysis of [1](3+) ions at E = +1.60?V in water at pH?2.6 (buffered with H(3)PO(4)/NaH(2)PO(4)) catalytically evolved dioxygen. Immediately after the electrolysis of the [1](3+) ion in H(2)(16)O at E = +1.40?V, the resultant solution displayed two resonance Raman bands at nu = 442 and 824?cm(-1). These bands shifted to nu = 426 and 780?cm(-1), respectively, when the same electrolysis was conducted in H(2)(18)O. The chemical oxidation of the [1](3+) ion by using a Ce(IV) species in H(2)(16)O and H(2)(18)O also exhibited the same resonance Raman spectra. The observed isotope frequency shifts (Δnu = 16 and 44?cm(-1)) fully fit the calculated ones based on the Ru-O and O-O stretching modes, respectively. The first successful identification of the metal-O-O-metal stretching band in the oxidation of water indicates that the oxygen-oxygen bond at the stage prior to the evolution of O(2) is formed through the intramolecular coupling of two Ru-oxo groups derived from the [1](3+) ion.     

Electrochemical Properties of an Osmium(II) Copolymer Film and Its Electrocatalytic Ability Towards the Oxidation of Ascorbic Acid in Acidic and Neutral pH

Copolymerization of an osmium(II) functionalized pyrrole moiety, osmium‐bis‐N,N'‐(2,2′‐bipyridyl)‐N‐(pyridine‐4‐ylmethyl‐(8‐pyrrole‐1yl–octyl)‐amine)chloride ( I ) with 3‐methylthiophene was carried out. The resulting conducting polymer film exhibited a clear redox couple associated with the Os^3+/2+ response and the familiar conducting polymer backbone signature. The effect of film thickness upon the redox properties of the copolymer was investigated in organic electrolyte solutions. Scanning electron micrographs (SEM) along with energy dispersive X‐ray (EDX) spectra of the copolymerized films were undertaken, both after formation and redox cycling in neutral buffer solution. These clearly show that electrolyte is incorporated into the polymer film upon redox cycling through the Os^3+/2+ redox system. The Os^3+/2+ response associated with the copolymer was seen to be significantly altered in the presence of ascorbic acid both in acidic and neutral pH buffer solutions. This pointed to an electrocatalytic reaction between the ascorbic acid and the Os³⁺ form of the copolymer. Under acidic conditions the copolymer film exhibited a sensitivity of 1.76 (±0.05) μA/mM with a limit of detection (LOD) of 1.45 μM for ascorbic acid. Under neutral pH conditions the copolymer exhibited a sensitivity of 19.26 (±1.05) μA/mM with a limit of detection (LOD) of 1.28 μM for ascorbic acid.     

Structural studies on the stepwise chelating processes of bidentate 2-(aminomethyl)pyridine and tridentate bis(2-pyridylmethyl)amine toward an acetate-bridged dirhodium(II) center

Several intermediates and final products of the reactions of [Rh(2)(mu-CH(3)COO)(4)(CH(3)OH)(2)] with a tridentate ligand bis(2-pyridylmethyl)amine (bpa) and bidentate 2-(aminomethyl)pyridine (amp) have been isolated, and the chelation processes of these ligands to the dirhodium(II) center are discussed. The reaction of a 2 equiv amount of bpa in chloroform afforded three products, [Rh(2)(mu-CH(3)COO)(2)(eta(1)-CH(3)COO)(bpa)(2)](+) ([1]+), C(2)-[Rh(2)(mu-CH(3)COO)(2)(bpa)(2)](2+) ([2a](2+)), and C(s)-[Rh(2)(mu-CH(3)COO)(2)(bpa)(2)](2+) ([2b](2+)), where C(2) and C(s) denote the molecular symmetry of the two geometrical isomers. X-ray crystallography revealed that [1](+) contains ax-eq chelated bidentate and ax-eq-eq tridentate bpa and that [2a](2+) and [2b](2+) have two ax-eq-eq tridentate bpa ligands (ax denotes the site trans to the Rh-Rh bond, and eq, the site perpendicular to it). The reaction is initiated by almost instantaneous monodentate or inter-Rh(2)-unit bridging coordination of bpa at the ax sites, which is followed by very slow ax-eq chelate formation and then ultimate ax-eq-eq tridentate coordination. The reaction of [Rh(2)(mu-CH(3)COO)(4)(CH(3)OH)(2)] with amp in 1:2 ratio in chloroform initially gives an insoluble polymer in which amp interconnects the ax sites of the dirhodium(II) units. Further reactions afforded [Rh(2)(mu-CH(3)COO)(2)(eta(1)-CH(3)COO)(amp)(2)](+) ([4](+)) and [Rh(2)(mu-CH(3)COO)(2)(amp)(2)](2+) ([5](2)(+)). The X-ray structural studies show that [4](+) has one ax-eq and one eq-eq chelate and [5](2)(+) two eq-eq chelates. More rigid tridentate ligands 2,2':6',2"-terpyridine (tpy) and 4'-chloro-2,2':6',2"-terpyridine (Cl-tpy) have been introduced at ax sites in a monodentate mode ([Rh(2)(mu-CH(3)COO)(4)(tpy)(2)] (8) and [Rh(2)(mu-CH(3)COO)(4)(Cl-tpy)(2)] (9)). While the Rh-Rh distances of these complexes and [Rh(2)(mu-CH(3)COO)(2)(2,2'-bipyridine)(2)(py)(2)](2+) ([7](2)(+)) are practically unchanged (2.56-2.60 A) except for 8 and 9 (2.4 A), the Rh-N(ax) distances range from 2.11 to 2.35 A. Relatively short distances are found for the compounds with ax-eq or ax-eq-eq chelates (<2.22 A). Longest distances (2.32-2.35 A) found for 8 and 9 may be due to the steric effect. The distances of other complexes fall in the normal region. The visible band of the pi*(Rh-Rh) --> sigma*(Rh-Rh) transition in solid-state reflectance spectra shows a red-shift as the Rh[bond]N(ax) distances becomes longer.     

羟基磷灰石在磺化聚醚苯并咪唑薄膜表面的生长

以聚[2,2′-(对氧基联苯)-5,5′-苯并咪唑](OPBI)及其磺化产物磺化聚[2,2′-(对氧基联苯)-5,5′-苯并咪唑](SOPBI)薄膜作为基体, 采用交替沉积和模拟体液(SBF)浸泡相结合的方法快速在薄膜表面沉积羟基磷灰石层. 采用选区电子衍射(SAED)和衰减全反射傅里叶变换红外光谱(ATR-FTIR)对羟基磷灰石(HA)的晶体结构进行了分析. 用扫描电子显微镜(SEM)对整个沉积过程中羟基磷灰石的形态变化进行了跟踪. 实验结果表明, SOPBI薄膜诱导HA沉积的速率明显快于OPBI薄膜. SOPBI的磺酸基团不但提供了固定Ca²⁺的负电表面, 而且还有助于咪唑基团对Ca²⁺的固定. 而缺失磺酸基团的OPBI在不同pH值的交替沉积溶液中的电离形式阻碍了咪唑基团对Ca²⁺和HPO₄^2-的作用, 且未能在SBF浸泡过程中得到改善.     

1-氯-2-甲酰基乙烯基二茂铁与钌乙烯基吡啶配合物的电化学共聚

利用与钌乙烯基吡啶配合物[Ru(bpy)(vpy)_2](PF_6)_2 (1) (bpy = 2,2'- bipyridine, vpy=4-vinylpyridine)的电化学共聚,加速了1-氯-2甲酰基乙烯基二 茂铁（CFVF）（2）的电化学聚合速度,制备了具有Fc~+/Fc和Ru~(3+)/Ru~(2+)电 化学响应的1～2共聚膜。探讨了共聚膜对酚类电化学氧化的催化活性和邻二硝基苯 （ONB）在膜上的氧化还原反应。     

The mechanism of water oxidation catalysis promoted by [tpyRu(IV)=O]2L3+: a computational study

The resting state of the recently reported water oxidation catalyst [tpyRu(II)-OH(2)](2)L(3+) (tpy = terpyridine; L = bipyridylpyrazolylic anion) ([2,2](3+)) must be activated by a series of proton-coupled oxidations in which four protons and four electrons are removed overall to afford the catalytically competent species [tpyRu(IV)O](2)L(3+) ([4,4](3+)). We have examined all of the plausible redox intermediates utilizing density functional theory coupled to a continuum solvation model. Our calculations reproduce well the first three redox potentials under pH = 1 conditions, and a reasonable correlation between theory and experiment is found for the fourth irreversible redox process that accompanies O(2) generation. The computed oxidation potentials to access [5,4](4+) and [5,5](5+), 1.875 and 2.032 V vs NHE, respectively, exclude the otherwise plausible possibilities of the catalytically active species having a higher oxidation state. [4,4](3+) has an antiferromagnetically coupled ground state in which one ruthenium has two unpaired electrons antiparallel to those of the other ruthenium. As we found in our previous work, two radicaloid terminal oxygen moieties with different spin orientations that are induced by spin polarization from the electron-deficient Ru(IV) centers are found. Two mechanistic scenarios are relevant and interesting for the key O-O bond formation event: intramolecular oxo-oxo coupling and coupling between one terminal oxo and the oxygen atom of the incoming water substrate. The intramolecular oxo-oxo coupling is facile, with a low barrier of 13.9 kcal mol(-1), yielding a peroxo intermediate. The necessary subsequent addition of water in an associative substitution mechanism to cleave one of the Ru-peroxo bonds, however, is found to be impractical at room temperature, with a barrier of DeltaG(double dagger) = 30.9 kcal mol(-1). Thus, while plausible, the intramolecular oxo-oxo coupling is unproductive for generating molecular dioxygen. The intermolecular O-O coupling is associated with a high barrier (DeltaG(double dagger) = 40.2 kcal mol(-1)) and requires the assistance of an additional proton, which lowers the barrier dramatically to 24.5 kcal mol(-1).     

Ruthenium terpyridine complexes containing a pyrrole-tagged 2,2'-dipyridylamine ligand-synthesis, crystal structure, and electrochemistry

Ruthenium(II) terpyridine complexes containing the pyrrole-tagged 2,2'-dipyridylamine ligand PPP (where PPP stands for N-(3-bis(2-pyridyl)aminopropyl)pyrrole with the general formula [Ru(tpy)(PPP)X](n+) (1, X = Cl(-); 2, X = H(2)O; 3, X = CH(3)CN; tpy = 2,2':6',2"-terpyridine) have been synthesized and characterized by (1)H NMR, IR, UV-vis, mass spectrometry, and elemental analysis. 1 and 2 have been structurally characterized by X-ray crystallography. Both 1 and 2 were successfully immobilized onto glassy carbon electrode via anodic oxidation of the pyrrole moiety on the PPP ligand to give stable and highly electroactive polymer films. Cyclic voltammetric studies of 1 in acetonitrile revealed a Ru(III)/Ru(II) couple at 0.4 V vs Cp(2)Fe(+/0) initially, but another redox couple resulting from chloride substitution by acetonitrile developed at E(1/2) = 0.82 V upon repetitive potential scan. This ligand substitution was induced by the acidic local environment caused by the release of protons during pyrrole polymerization. The electropolymerization of 2 in aqueous medium allowed the observation of the formation of Ru(IV)═O species in polypyrrole film. As the film grew thicker, the size of the Ru(III)/(/)Ru(II) couple (E(1/2) = 0.8 V vs SCE at pH 1) of poly[Ru(tpy)(PPP)(OH(2))](n+) increased accordingly, whereas the growth of the Ru(IV)/Ru(III) couple (E(1/2) = 0.89 V vs SCE at pH 1) leveled off after the film had reached a certain thickness. The Pourbaix diagram of the E(1/2) of the Ru(III) /Ru(II) and Ru(IV)/Ru(III) couples vs pH of the electrolyte medium has been obtained. The resulting poly[Ru(tpy)(PPP)(OH(2))](n+) film is electrocatalytically active toward the oxidation of benzyl alcohol.     

Non-innocent behaviour of ancillary and bridging ligands in homovalent and mixed-valent ruthenium complexes [A2Ru(mu-L)RuA2]n, A = 2,4-pentanedionato or 2-phenylazopyridine, L(2-) = 2,5-bis(2-oxidophenyl)pyrazine

Structurally characterised 2,5-bis(2-hydroxyphenyl)pyrazine (H2L) can be partially or fully deprotonated to form the complexes [(acac)2Ru(mu-L)Ru(acac)2], [1], acac = acetylacetonato = 2,4-pentanedionato, [(pap)2Ru(mu-L)Ru(pap)2](ClO4)2, [2](ClO4)2, pap = 2-phenylazopyridine, or [(pap)2Ru(HL)](ClO4), [3](ClO4). Several reversible oxidation and reduction processes were observed in each case and were analysed with respect to oxidation state alternatives through EPR and UV-VIS-NIR spectroelectrochemistry. In relation to previously reported compounds with 2,2'-bipyridine as ancillary ligands the complex redox system [1]n is distinguished by a preference for metal-based electron transfer whereas the systems [2]n and [3]n favour an invariant Ru(II) state. Accordingly, the paramagnetic forms of [1]n, n = -, 0, +, exhibit metal-centred spin whereas the odd-electron intermediates [2]+, [2](3+) and [3] show radical-type EPR spectra. A comparison with analogous complexes involving the 3,6-bis(2-oxidophenyl)-1,2,4,5-tetrazine reveals the diminished pi acceptor capability of the pyrazine-containing bridge.     

Charge mediation by ruthenium poly(pyridine) complexes in 'second-generation' glucose biosensors based on carboxymethylated β-cyclodextrin polymer membranes

Four different poly(pyridine) complexes of ruthenium, viz. Ru(II)(trpy)(phen)(OH(2))](2+) (1), trans-[Ru(III)(2,2'bpy)(2)(OH(2))(OH)](2+) (2), [(2,2'bpy)(2)(OH)Ru(III)ORu(III)(OH)(2,2'bpy)(2)](4+) (3), and [Ru(II)(4,4'bpy)(NH(3))(5)](2+) (4) (2,2'bpy=2,2'-bipyridine, 4,4'bpy=4,4'-bipyridine, trpy=2,2',2"-terpyridine, phen=1,10-phenanthroline), were tested as non-physiological charge mediators of 'second-generation' glucose biosensors. The membranes for these biosensors were prepared by casting anionic carboxymethylated beta-cyclodextrin polymer films (beta-CDPA) directly onto the Pt or glassy carbon (GC) disk electrodes. Simultaneously, glucose oxidase (GOD) was immobilized in the films by covalent bonding and the Ru complexes were incorporated both by inclusion in the beta-CD molecular cavities and by ion exchange at the fixed carboxymethyl cation-exchange sites. The leakage of the mediator from the polymer has been minimized by adopting a suitable pre-treatment procedure. The biosensors catalytic activities increased in the order 1<2<3<4, as established by linear sweep voltammetry. In case of complexes 2-4, the enzymatic glucose oxidation was mediated by the Ru complexes at their redox potentials. However, this oxidation was mediated by oxygen in case of complex 1 where H(2)O(2) was detected as the reaction product. The effectiveness of the mediators used in the presence of oxygen has been estimated using Pt and GC supports. The redox potential of the mediator does not depend on the support used, while the oxidation of H(2)O(2) proceeds on GC at much higher positive potentials than on Pt. The sensitivity and the linear concentration range of the biosensor studied varied significantly. For complex 4, which forms stable inclusion complex with beta-CD, the biosensor sensitivity was the highest and equal to 7.2 micro A mM(-1) cm(-2), detectability was as low as 1 mM, but the linear concentration range was limited only to 4 mM. In contrast, for complexes 2 and 3 the sensitivity was 0.4 and 3.2 micro A mM(-1) cm(-2), while the linear concentration range extended up to at least 24 and 14 mM glucose, respectively. Even though some common interfering substances, such as ascorbate, paracetamol or urea, are oxidized at potentials close to those of the Ru complex redox couples, their electro-oxidation currents at physiological concentrations are insignificant compared to those due to the biocatalytic oxidation of glucose. The biosensor response to glucose is reversible as demonstrated by the inhibition of GOD activity by Cu(II). That is, the Cu(II) concentration required to inhibit by half the response to glucose of the biosensor containing complex 2 was 1.0 mM. This inhibitory effect was fully reversed by addition of citrate, a ligand forming sufficiently stable complex with Cu(II).     

Polymer/Iron Oxide Nanoparticle Modified Glassy Carbon Electrodes for the Enhanced Detection of Epinephrine

Novel electrochemical sensors for epinephrine (EP) based on a glassy carbon electrode (GCE) modified with a redox polymer film and iron (III) oxide nanoparticles (Fe₂O₃NP) have been developed. Two redox polymers‐poly(brilliant cresyl blue) (PBCB) and poly(Nile blue) (PNB), and two different architectures‐polymer/Fe₂O₃/GCE and Fe₂O₃/polymer/GCE were investigated. The electrochemical oxidation of epinephrine at the modified electrodes was performed by differential pulse voltammetry (DPV), in pH 7 electrolyte, and the analytical parameters were determined. The results show enhanced performance, more sensitive responses and lower detection limits at the modified electrodes, compared to other electrochemical epinephrine sensors reported in the literature. The best voltammetric response with the lowest detection limit was obtained for the determination of epinephrine at PBCB/Fe₂O₃/GCE. The novel sensors are reusable, with good reproducibility and stability, and were successfully applied to the determination of epinephrine in commercial injectable adrenaline samples.     

Enhanced rate of arene hydrogenation with imidazolium functionalized bipyridine stabilized rhodium nanoparticle catalysts

The imidazolium functionalized bipyridine compounds, {4,4'-bis[7-(2,3-dimethylimidazolium)heptyl]-2,2'-bipyridine}(2+) ([BIHB](2+)) and {4,4'-bis[(1,2-dimethylimidazolium)methyl]-2,2'-bipyridine}(2+) ([BIMB](2+)), were prepared and used as Rh nanoparticle stabilizers. The dispersed Rh nanoparticles were used as catalysts in the biphasic hydrogenation of various arene substrates. The catalytic activity was strongly influenced by the stabilizer employed and followed the trend [BIHB](2+) > bipy > [BIMB](2+). The steric and electronic characteristics of the imidazolium functionalized bipyridine ligands were assessed via the synthesis of rhenium carbonyl complexes, which facilitated the rationalization of the catalytic properties of the nanoparticles.