Identification of a new C28H14 polycyclic aromatic hydrocarbon as a product of supercritical fuel pyrolysis: Tribenzo[cd,ghi,lm]perylene

Tribenzo[cd,ghi,lm]perylene has been identified as a product of the supercritical pyrolysis of both toluene and Fischer-Tropsch synthetic jet fuel. This identification is based on HPLC/UV/MS data, which show that compound I, eluting immediately after five other C28H14 isomers, is also a C28H14 PAH. The UV spectrum of compound I has features of a benzenoid PAH, of which there are only eight C28H14 isomers. Four of these isomers--benzo[a]coronene, phenanthro[5,4,3,2-efghi]perylene, benzo[cd]naphtho[3,2,1,8-pqra]perylene, and benzo[pqr]naphtho[8,1,2-bcd]perylene--have already been identified as supercritical pyrolysis products by matching their UV spectra with those of respective reference standards. A fifth C28H14 PAH--benzo[ghi]naphtho[8,1,2-bcd]perylene, which does not have a reference standard--has also been recently identified through MS and UV data, use of annellation theory to predict UV spectral characteristics, and length-to-breadth ratio/retention time data. Of the remaining three isomers, bisanthene (IUPAC name phenanthro[1,10,9,8-opqra]perylene) has been determined not to be present in our product mixture, as its UV spectrum does not match that of any of our product PAH. Using annellation theory, we predict the UV spectral characteristics of the two remaining C28H14 benzenoid isomers, for which there are no reference standards (tribenzo[cd,ghi,lm]perylene and naphthaceno[3,4,5,6,7-defghij]naphthacene). Results from this analysis show that the predicted UV spectral features of tribenzo[cd,ghi,lm]perylene match those of compound I--and that those of naphthaceno[3,4,5,6,7-defghij]naphthacene are inconsistent with those of compound I. The length-to-breadth ratio of tribenzo[cd,ghi,lm]perylene also agrees with compound I's HPLC elution behavior. This is the first time that tribenzo[cd,ghi,lm]perylene (IUPAC name phenanthro[2,1,10,9,8,7-pqrstuv]pentaphene) has been identified as a product of fuel pyrolysis or combustion.     

Liquid-crystalline and electron-deficient coronene oligocarboxylic esters and imides by twofold benzogenic Diels-Alder reactions on perylenes

Alkyl esters, imides and imido-esters of coronene-tri-, -tetra- and -octacarboxylic acids are accessible by a twofold oxidative benzogenic Diels-Alder reaction. Alkyl acrylates add to perylene, and maleic alkyl imides react twice with perylene as well as with perylene-tetracarboxylic tetraesters. Coronenes substituted with a greatly variable number of electron-withdrawing substituents are thus accessible, and di- and tetraimide derivatives are shown to be very pronounced electron-acceptor materials. The tri- and tetraalkyl esters and imidoesters self-assemble into columnar liquid-crystalline phases.     

First identification of benzo[ghi]naphtho[8,1,2-bcd]perylene as a product of fuel pyrolysis, using high-performance liquid chromatography with diode-array ultraviolet-visible absorbance detection and mass spectrometry

We present HPLC/UV/MS evidence to support the identification of benzo[ghi]naphtho[8,1,2-bcd]perylene as a product of supercritical toluene pyrolysis. Mass spectral data confirm that compound I-eluting in between co-eluting benzo[a]coronene/phenanthro[5,4,3,2-efghi]perylene and benzo[pqr]naphtho[8,1,2-bcd]perylene, all three of which have been unequivocally identified as C(28)H(14) products of toluene pyrolysis-is also a C(28)H(14) product component. The UV spectrum of compound I is presented, and indicates that it is a benzenoid polycyclic aromatic hydrocarbon (PAH). Five of the eight benzenoid C(28)H(14) PAH isomers have published UV spectra, and characteristics of the remaining three are deduced from annelation theory. Only one of these compounds, benzo[ghi]naphtho[8,1,2-bcd]perylene, is predicted to have a UV spectrum with characteristics that we find in the spectrum of compound I. In addition, benzo[ghi]naphtho[8,1,2-bcd]perylene is the only benzenoid C(28)H(14) isomer whose length-to-breadth ratio is consistent with the HPLC retention time of compound I. The reaction mechanism through which benzo[ghi]naphtho[8,1,2-bcd]perylene is formed in this environment is shown, and is consistent with reaction pathways of other large PAH found in this product mixture.     

A facile route to water-soluble coronenes and benzo[ghi]perylenes

Click reactions at the bay-position of perylenes and a new route to benzo[ghi]perylenes and coronenes are presented. Irradiation with light leads to an electrocyclic reaction of the newly formed triazole ring(s) with the neighbouring bay-positions of the perylene core and after oxidation by air, the benzo[ghi]perylenes and coronenes are obtained. By using Newkome dendrimers as substituents for perylene diimides (PDIs), water solubility can be achieved after removal of the tert-butyl protecting groups. The aggregation and optical properties of the bay-functionalised PDIs, benzo[ghi]perylenes and coronenes are investigated by absorption and fluorescence spectroscopy.     

APEX Strategy Represented by Diels–Alder Cycloadditions—New Opportunities for the Syntheses of Functionalised PAHs

Diels–Alder cycloaddition of various dienophiles to the bay region of polycyclic aromatic hydrocarbons (PAHs) is a particularly effective and useful tool for the modification of the structure of PAHs and thereby their final properties. The Diels–Alder cycloaddition belongs to the single-step annulative π-extension (APEX) reactions and represents the maximum in synthetic efficiency for the constructions of π-extended PAHs including functionalised ones, nanographenes, and π-extended fused heteroarenes. Herein we report new applications of the APEX strategy for the synthesis of derivatives of 1,2-diarylbenzo[ghi]perylene, 1,2-diarylbenzo[ghi]perylenebisimide and 1,2-disubstituted-benzo[j]coronene. Namely, the so far unknown cycloaddition of 1,2-diarylacetylenes into the perylene and perylenebisimide bay regions was used. 1,2-Disubstituted-benzo[j]coronenes were obtained via cycloaddition of benzyne into 1,2-diarylbenzo[ghi]perylenes by using a new highly effective system for benzyne generation and/or high pressure conditions. Moreover, we report an unprecedented Diels–Alder cycloaddition–cycloaromatisation domino-type reaction between 1,4-(9,9-dialkylfluoren-3-yl)-1,3-butadiynes and perylene. The obtained diaryl-substituted core-extended PAHs were characterised by DFT calculation as well as electrochemical and spectroscopic measurements.     

Photoconductive Core–Shell Liquid‐Crystals of a Perylene Bisimide J‐Aggregate Donor–Acceptor Dyad

A novel core–shell structured columnar liquid crystal composed of a donor‐acceptor dyad of tetraphenoxy perylene bisimide (PBI), decorated with four bithiophene units on the periphery, was synthesized. This molecule self‐assembles in solution into helical J‐aggregates guided by π–π interactions and hydrogen bonds which organize into a liquid‐crystalline (LC) columnar hexagonal domain in the solid state. Donor and acceptor moieties exhibit contrasting exciton coupling behavior with the PBIs’ (J‐type) transition dipole moment parallel and the bithiophene side arms’ (H‐type) perpendicular to the columnar axis. The dyad shows efficient energy and electron transfer in solution as well as in the solid state. The synergy of photoinduced electron transfer (PET) and charge transport along the narcissistically self‐assembled core–shell structure enables the implementation of the dye in two‐contact photoconductivity devices giving rise to a 20‐fold increased photoresponse compared to a reference dye without bithiophene donor moieties.     

Gas chromatographic-mass spectrometric study of the oil fractions produced by microwave-assisted pyrolysis of different sewage sludges

The pyrolysis of sewage sludge was studied in a microwave oven using graphite as microwave absorber. The pyrolysis temperature ranged from 800 to 1000 degrees C depending on the type of sewage sludge. A conventional electrical furnace was also employed in order to compare the results obtained with both methods. The pyrolysis oils were trapped in a series of condensers and their characteristics such as elemental analysis and calorific value were determined and compared with those of the initial sludge. The oil composition was analyzed by GC-MS. The oils from the microwave oven had n-alkanes and 1-alkenes, aromatic compounds, ranging from benzene derivatives to polycyclic aromatic hydrocarbons (PAHs), nitrogenated compounds, long chain aliphatic carboxylic acids, ketones and esters and also monoterpenes and steroids. The oil from the electric oven was composed basically of PAHs such as naphthalene, acenapthylene, phenanthrene, fluoranthene, benzo[a]anthracene, benzofluoranthenes, benzopyrenes, indenepyrene, benzo[ghi]perylene, and anthanthrene. In contrast, these compounds were not produced in the case of microwave-assisted pyrolysis.     

Evolution of absorption, fluorescence, laser and chemical properties in the series of compounds perylene, benzo(ghi)perylene and coronene.

Absorption. fluorescence and laser properties of perylene, benzo(ghi)perylene and coronene are studied experimentally (under the same conditions) and quantum chemically at room (293 K) and at low (77 and 4 K) temperatures and direct comparison is made between the results for each molecule. All the main absorption and fluorescence parameters such as oscillator strength, fe, quantum yield, gamma, decay time, tauf, fluorescence rate constant, kf (Einstein coefficient, A) and intersystem crossing rate constant, kST, are measured or calculated. The systems of singlet and triplet levels for these compounds are simulated and analyzed. Triplet states mixing with the lowest singlet S1 state are determined. The low values of kST found are explained. The possible vibronic coupling in the molecule coronene is discussed. The nature of the three fluorescence bands of coronene observed is interpreted. The change in the arrangement of the singlet and triplet levels of the studied compounds is interpreted quantum-chemically. It is found that at room temperature (293 K), only perylene shows laser action, while all three compounds show good laser oscillation at low temperature (< 100 K). The differences in the laser properties of these compounds are explained by the inversion of the Sp(1La) and Sinfinity(1Lb) levels which occurs in the transition from perylene to benzo(ghi)perylene. Chemical properties of the compounds studied are outlined. Linear and quasi-linear fluorescence spectra of perylene and benzo(ghi)perylene, obtained at 77 and 4 K. can be used in the identification of these compounds.     

Structural,photoelectrical and thermol properties of ultra-stable Benzo[ghi]perylene trimide dimer anion

Perylene diimide and its various derivatives tend to form stable anion radicals, which can usually form a variety of aggregates with special properties. Herein, we reported synthesis and properties of the benzo[ghi]perylene trimide and its anion radical π-bonded dimer. The dimer exhibited high stable in solid status and in most organic solvents, but conversion of L-type π-bonded dimer to face to face type π-bonded dimer or π-stacked oligomer occurs in dimethyl formamide solution. The temperature and crystallization influenced the π-bonded length in the dimer and the partial memory can be reserved and probed in solution at room temperature.     

Influence of peripheral alkyl chain length on the mesomorphic behaviours of hexasubstituted triphenylene 2,3-dicarboxylic esters

A comparative study of our established synthetic approaches to hexasubsituted triphenylenes 2,3-dicarboxylic esters containing four identical β-alkoxy and two adjacent β-alkoxycarbonyl side chains shows that the phase behaviours of small-sized discotic liquid crystals can be tailored over a wide range by simply varying the length of the peripheral alkyl chains. All the prepared esters in two series were observed to form a single hexagonal columnar phase, except for Tp4-1 having four β-butyloxy and two adjacent β-methoxycarbonyl chains which displays two columnar mesophase behaviours with a transition from the columnar plastic phase to hexagonal columnar phase. A significant difference between the two mesophase was observed in the variable temperature X-ray diffraction studies, and the mesophase assignment was also confirmed by polarising optical microscopy and differential scanning calorimetry. Moreover, the prepared esters in each series display the general trend of decreasing clearing temperature upon increasing alkoxy or alkoxycarbonyl chains length. The intermediate triphenylene 2,3-dicarboxylic acids were also found not only to exhibit columnar hexagonal mesophase over a narrower temperature range by maintaining high melting and clearing points but also to form organogel on mixing with toluene or dichloromethane with the assistance of hydrogen bonding.     

Preparation of (Z)-1-fluoro-1-alkenyl carboxylates,carbonates and carbamates through chromium mediated transformation of dibromofluoromethylcarbinyl esters and the reactivity as double acyl group donors

CrCl₂/Mn-mediated transformation of various dibromofluoromethylcarbinyl esters including carboxylates, carbonates and carbamates provided 1-fluoro-1-alkenyl esters via [2,3]-sigmatropic rearrangement of ester group. Reaction proceeded by using CrCl₂/Mn system under mild conditions (in THF at room temperature) to give 1-fluoro-1-alkenyl esters in good yield with an excellent Z selective manner. 1-Fluoro-1-alkenyl ester thus obtained acts as a double acyl donor in the reaction with necleophiles such as amine, thiol, alcohol as well as bifunctional necleophiles such as ethylene diamine derivative.     

Toward a visible light mediated photocyclization: Cu-based sensitizers for the synthesis of [5]helicene

A photochemical synthesis of [5]helicene employing a copper-based sensitizer 7 has been developed that avoids the disadvantages associated with the traditional UV light mediated method. The visible light mediated synthesis uses common glassware and a simple household light bulb without the competing formation of [2 + 2] cycloadducts, regioisomers, or the overoxidation product benzo[ghi]perylene 3. Preliminary results show that the reaction time can be significantly reduced through the use of a continuous flow strategy.     

Infrared spectroscopy of matrix-isolated polycyclic aromatic hydrocarbon cations. 2. The members of the thermodynamically most favorable series through coronene

Gaseous, ionized polycyclic aromatic hydrocarbons (PAHs) are thought to be responsible for a very common family of interstellar infrared emission bands. Here the near- and mid-infrared spectra of the cations of the five most thermodynamically favored PAHs up to coronene:phenanthrene, pyrene, benzo[e]pyrene, benzo[ghi]perylene, and coronene, are presented to test this hypothesis. For those molecules that have been studied previously (pyrene, pyrene-d10, and coronene), band positions and relative intensities are in agreement. In all of these cases we report additional features. Absolute integrated absorbance values are given for the phenanthrene, perdeuteriophenanthrene, pyrene, benzo[ghi]perylene, and coronene cations. With the exception of coronene, the cation bands corresponding to the CC modes are typically 2-5 times more intense than those of the CH out-of-plane bending vibrations. For the cations, the CC stretching and CH in-plane bending modes give rise to bands that are an order of magnitude stronger than those of the neutral species, and the CH out-of-plane bends produce bands that are 5-20 times weaker than those of the neutral species. This behavior is similar to that found in most other PAH cations studied to date. The astronomical implications of these PAH cation spectra are also discussed.     

Photoinduced Processes of Supramolecular Nanoarrays Composed of Porphyrin and Benzo[ghi]perylenetriimide Units through Triple Hydrogen Bonds with One‐Dimensional Columnar Phases

One‐dimensional supramolecular columnar phases composed of porphyrins (electron donor: D) and benzo[ghi]perylenetriimides (electron acceptor: A) through triple hydrogen bonds have been successfully constructed to perform sequential light‐harvesting and electron‐transfer processes. A series of benzo[ghi]peryleneimide derivatives have been synthesized to examine the substituent effects such as imide and nitrile groups on the spectroscopic and electrochemical properties. Then, formation of the 1:1 supramolecular complex between zinc porphyrin and benzo[ghi]perylenetriimide derivatives through triple hydrogen bonds was confirmed by Job's plot of ¹H NMR titration. Next, the one‐dimensional supramolecular nanoarrays were successfully prepared in a mixed solvent. X‐ray diffraction (XRD) measurement suggested that these nanoarrays contained one‐dimensional columnar phases composed of stacked donor and acceptor layers. Finally, femtosecond transient absorption and electron spin resonance (ESR) measurements clearly indicated that photoinduced electron transfer occurred via the singlet excited states in the supramolecular columns.     

Fullerenyl boronic esters: ferric perchlorate-mediated synthesis and functionalization

Fullerenyl boronic esters have been prepared by a ferric perchlorate-promoted reaction of [60]fullerene with various arylboronic acids. The obtained fullerenyl boronic esters could undergo further functionalization with diols to afford C(60)-fused dioxane/dioxepane derivatives. A possible reaction mechanism for the formation of fullerenyl boronic esters has been proposed.     

Liquid‐Crystalline Mesogens Based on Cyclo[6]aramides: Distinctive Phase Transitions in Response to Macrocyclic Host–Guest Interactions

Producing macrocyclic mesogens that are responsive to guest encapsulation presents a significant challenge. Cyclo[6]aramides, a type of macrocycle with a hydrogen‐bond‐constrained backbone, exhibit thermotropic lamellar, discotic nematic, hexagonal, and rectangular columnar mesophases over a considerably wide temperature range, including at room temperature. Additionally, cyclo[6]aramides show unusual mesophase transitions from lamellar to hexagonal columnar phase mediated by macrocyclic host–guest (H–G) interactions between the macrocycles and alkylammonium salts. The phase transition, triggered by an organic guest engaging in H–G interactions with a macrocyclic cavity, provides a novel strategy for manipulating the properties of liquid‐crystalline materials. The crystal structure of a homologous cyclo[6]aramide reveals a disk‐shaped, near‐planar molecular backbone that facilitates intermolecular π–π stacking and leads to columnar assembly.     

Chiral Lewis acid-catalyzed enantioselective intramolecular carbonyl ene reactions of unsaturated alpha-keto esters

[reaction: see text] Chiral Lewis acid-promoted highly enantioselective intramolecular carbonyl ene reactions of unsaturated alpha-keto esters have been investigated. In the presence of chiral Lewis acids such as [Sc((R,R)-Ph-pybox)](OTf)(3) and [Cu((S,S)-Ph-box)](OTf)(2), several unsaturated alpha-keto esters underwent carbonyl ene reactions in CH(2)Cl(2) at room temperature to give monocyclic products in good yield and excellent enantioselectivity.     

Temperature‐Responsive Luminescent Solar Concentrators: Tuning Energy Transfer in a Liquid Crystalline Matrix

Temperature‐responsive luminescent solar concentrators (LSCs) have been fabricated in which the Förster resonance energy transfer (FRET) between a donor–acceptor pair in a liquid crystalline solvent can be tuned. At room temperatures, the perylene bisimide (PBI) acceptor is aggregated and FRET is inactive; while after heating to a temperature above the isotropic phase of the liquid crystal solvent, the acceptor PBI completely dissolves and FRET is activated. This unusual temperature control over FRET was used to design a color‐tunable LSC. The device has been shown to be highly stable towards consecutive heating and cooling cycles, making it an appealing device for harvesting otherwise unused solar energy.     

Unsymmetrical alkoxy-substituted triphenylenes: the dependence of mesomorphism on molecular shape

Several series of unsymmetrical hexa-alkoxytriphenylenes have been prepared. For almost every series a maximum in the Colh-I clearing point is found for the most symmetrical triphenylene, i.e. when all six alkoxy chains are of equal length. A similar trend is found for the melting points (Tm), although the effect is not so pronounced. A minimum length is required for formation of a columnar mesophase (Col hd). After this critical value has been reached for short alkoxy chains, much lower Colh-I temperatures are then observed for longer chains. Ordered hexagonal columnar phases required for efficient photoluminescence and electroluminescence have been found for several asymmetrical homologues with comparable TCol-I to those observed for the symmetrical homologues, but also with lower Tm. This may facilitate the preparation of mixtures of triphenylenes with the desired ordered hexagonal columnar phases with a TCol-I and a Tm below room temperature.     

Supramolecular control over donor-acceptor photoinduced charge separation

A novel donor-bridge-acceptor system has been synthesized by covalently linking a p-phenylene vinylene oligomer (OPV) and a perylene diimid (PERY) at opposite ends of a m-phenylene ethynylene oligomer (FOLD) of twelve phenyl rings, containing nonpolar (S)-3,7-dimethyl-1-octanoxy side chains. For comparison, model compounds have been prepared in which either the donor or acceptor is absent. In chloroform, the oligomeric bridge is in a random coil conformation. Upon addition of an apolar solvent (heptane) the oligomeric bridge first folds into a helical stack and subsequently intermolecular self-assembly of the stacks into columnar architectures occurs. Photoexcitation in the random coil conformation, where the interaction between the donor and acceptor chromophores is small, results only in long-range intramolecular energy transfer in which the OPV singlet-excited state is transformed into the PERY singlet-excited state. In the folded conformation of the bridge, donor and acceptor are closer and their enhanced interaction favors the formation the OPV(*)(+)-FOLD-PERY(*)(-) charge-separated state upon photoexcitation. As a result, the extent of photoinduced charge separation depends on the degree of folding of the bridge between donor and acceptor and therefore on the apolar nature of the medium. As a consequence, and contrary to conventional photoinduced charge separation processes, the formation of the OPV(*)(+)-FOLD-PERY(*)(-) charge-separated state is more favored in apolar media.