LC/MS determination of bisphenol A in river water using a surface-modified molecularly-imprinted polymer as an on-line pretreatment device

A new analytical method for the determination of bisphenol A (BPA) by LC/MS was developed and applied to environmental water samples. Quantitative MS detection of BPA was carried out in the negative mode. In order to preconcentrate the target compound yet prevent serious contamination of the water samples from the experimental environment, we employed column switching HPLC coupled with a pretreatment column of surface-modified molecularly-imprinted polymers. The recovery of BPA from a spiked environmental water sample was 102% and the repeatability of actual determinations of water samples containing 20 ng/L of BPA was 5.4% RSD. By modifying the surfaces of the molecularly-imprinted polymer particles packed in the pretreatment column, interference from the water samples was effectively removed, resulting in a significant increase in sensitivity and more reliable results. This method was successfully applied to the trace determination of BPA in environmental water samples using LC/MS.     

Novel surface modified molecularly imprinted polymer focused on the removal of interference in environmental water samples for chromatographic determination

Uniformly sized molecularly imprinted polymers (MIPs) for bisphenol A (BPA) with surface modification and immobilized intervals of functional monomers afforded by utilizing 4,4'-methylenebisphenol as a pseudo component have been prepared. MIPs for BPA were prepared using 4-vinyl pyridine immobilized in the most effective interval and ethylene glycol dimethacrylate as a functional monomer and cross-linking agent, respectively. Prepared MIPs showed significant selectivity for BPA retention and removal performance for interference in actual samples as the HPLC stationary phase compared to those of ordinary MIPs. These MIPs were employed as pretreatment media of column switching HPLC and the HPLC system provided a detection limit of 0.36 ppt when electrochemical detection was used. Actual samples, including Suwannee River natural organic matter (NOM), were applied and BPA was detected in the NOM even if widely used UV detection was employed.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Determination of bisphenol A with effective pretreatment medium using automated column-switching HPLC with fluorescence detection

A practical way for reducing contaminants, such as humic acids, and solving column-clogging problem in environmental water analysis with liquid chromatography is proposed. Detection interference by contamination is one of the most important issues of the environmental analyses. Moreover, due to the recent smaller diameter and fine particle size of an analytical column for HPLC system, a column-clogging problem is another practical difficulty as well. We found it possible to solve these problems by employing column-switching HPLC, which consists of a pretreatment column containing surface-modified polymer particles and flow changeover valves for cleaning the remaining matrices in the pretreatment column prior to analysis. This method was successfully applied to actual HPLC-fluorescence detection of bisphenol A. Limit of detection (LOD) in real sample was <0.7 ng/L. Repeatability was around 1.4% and recovery was around 97% or more. A particular pressure increase was not observed in 150 repeated analyses of real river water samples.     

Simultaneous determination of bisphenol A and its halogenated derivatives in river water by combination of isotope imprinting and liquid chromatography-mass spectrometry

A restricted access media-molecularly imprinted polymer (RAM-MIP) for [2H16]bisphenol A (BPA-d16) was prepared by a multi-step swelling and polymerization method using 4-vinylpyridine as a functional monomer and ethylene glycol dimethacrylate as a cross-linker, followed by hydrophilic surface modification using glycerol dimethacrylate and glycerol monomethacrylate as hydrophilic monomers. The obtained RAM-MIP showed excellent molecular recognition abilities for BPA and BPA-d6 as well as BPA-d16 used as the template molecule, and good ones for tetrachlorobisphenol A (Cl4-BPA) and tetrabromobisphenol A (Br4-BPA). Next, the RAM-MIP was utilized for selective on-line pretreatment and enrichment of BPA, Cl4-BPA and Br4-BPA in a river water sample, followed by their separation and determination by LC-MS. The calibration graphs of BPA, Cl4-BPA and Br4-BPA, constructed using BPA-d6 as an internal standard, showed good linearity in the range of 12.5-200 pg/mL (r > 0.999) with a 2-mL injection of a river water sample. The inter-day precision data for the assay of BPA, Cl4-BPA and Br4-BPA at 25 pg/mL were 1.08, 3.67 and 1.58%, respectively. Furthermore, this method was successfully applied for the simultaneous determination of BPA and its halogenated derivatives in river water.     

Determination of bisphenol A in environmental water at ultra-low level by high-performance liquid chromatography with an effective on-line pretreatment device

We have developed a simple HPLC method for the microanalysis of bisphenol A (BPA), which is often contained in environmental water and is known as an endocrine disrupter. HPLC coupled with electrochemical detection requires a simpler procedure of pretreatment compared to GC-MS. In this study, we analyzed BPA using molecularly imprinted polymer as an on-line pretreatment device. This polymer has molecular recognition sites and provides specific selectivity in extraction process. Due to this effect, the detection limit obtained with this HPLC was 0.36 ng/l. This method applied to environmental water and purified water samples containing 2-70 ng/l of BPA successfully. Furthermore, UV detection was performed in some actual analyses.     

Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns

A bisphenol A (BPA) molecularly imprinted polymer, the composition of which was optimised using a chemometric approach, has been applied to the selective preconcentration of the template from aqueous samples. The selectivity of the polymer toward BPA and related compounds was evaluated chromatographically. The BPA-imprinted polymer was packed in a column and used for continuous on-column solid-phase extraction (MISPE) of aqueous samples followed by subsequent analysis by HPLC with fluorescence detection of the eluted fractions. The composition of the washing solvent applied in the MISPE procedure was optimised to favour the specific interactions of the MIP with BPA and to remove the non-selectively bound matrix components. The MISPE method has proven to be effective for selective preconcentration of BPA in aqueous samples (recoveries >84% obtained in the eluate for 10–100 mL sample volumes) enabling detection and quantification limits of 1.0 and 3.3 ng mL^–1, respectively (based on 25 mL sample size). Analytical recoveries were between 92 and 101% for river water samples spiked with known amounts of BPA (30, 60, and 80 ng mL^–1); relative standard deviations (RSD) were lower than 5.0%.     

Fully automated liquid chromatography-mass spectrometry determination of 17beta-estradiol in river water

Surface modified molecularly imprinted polymers (SM-MIPs) for 17beta-estradiol (E2), utilizing 6-ketoecradiol as a pseudo template were prepared. MIPs for E2 were synthesized using 4-vinyl pyridine and ethylene dimethacrylate as a functional monomer and cross-linking agent, respectively. MIPs selectively retained E2 and provided excellent chromatographic resolution from interfering compounds inherent in river water sample matrices. Therefore, freshly prepared MIPs were applied to quantitative mass spectrometric (negative electrospray ionization mode) detection of low levels of E2 in river water sample. In order to pre-concentrate the target compound for HPLC analysis, column switching was coupled with a pretreatment column packed with the MIPs. The repeatability of actual determinations of river water sample, in which background E2 was not detected, spiked with 50 ng/L of E2 was 2.2% RSD with a detection limit and qualification limit of 1.8 and 5.4 ng/L, respectively. Surface modification of MIP particlefs packed in the pretreatment column provided selective affinity and on-line concentration of low levels of E2 while simultaneously eliminating sample matrix interference, resulting in a significant increase in sensitivity and reproducibility for liquid chromatography-mass spectrometry analysis of E2 in river water sample.     

柱切换技术-高效液相色谱法快速检测大鼠血浆中的普萘洛尔对映体

建立了快速检测大鼠血浆中普萘洛尔对映体浓度的柱切换-高效液相色谱法。将自制限进填料柱作为预处理柱,通过直接进样方式,使普萘洛尔对映体在预处理柱上保留,同时除去血浆中的蛋白质等大分子;再通过柱切换技术,使普萘洛尔对映体在键合型纤维素-三(3,5-二甲基苯基氨基甲酸酯)(Chiralcel OD-RH)分析柱上得到手性拆分。通过条件优化,确定切换前预处理流动相为硼酸盐缓冲液(pH 8.5)-甲醇(95:5, v/v),流速为1.0 mL/min;切换后分析流动相为异丙醇-乙醇-0.2 mmol/L硼酸盐缓冲液(pH 8.5)(30:30:40, v/v/v),流速为0.8 mL/min;切换时间为3 min;柱温为25 ℃;检测波长为293 nm。普萘洛尔两对映体在25～500 mg/L的质量浓度范围内具有良好的线性关系(r=0.9995), 3个加标水平(50、100、250 mg/L)的平均回收率为97.89%～101.56%,日内和日间精密度均小于5%。该方法简便、快速、灵敏、准确,适于血浆样本中手性药物的药代动力学研究。     

Shielded molecularly imprinted polymers prepared with a selective surface modification

Uniformly sized, molecularly imprinted polymers (MIPs) of bisphenol A (BPA), one of many potential endocrine disruptors, were prepared by selective surface modification and immobilized at intervals of functional monomers with 4,4′‐methylenebisphenol as a pseudotemplate. MIPs for BPA were prepared with 4‐vinyl pyridine immobilized at the most effective interval and with ethylene glycol dimethacrylate monomer as a functional crosslinker. The prepared MIPs were surface‐modified with both polar and ionic monomers with different modification methods and then evaluated to reveal their selectivity and retention characteristics. Some of the modified MIPs showed significant selectivity for BPA retention when they were used as high‐performance liquid chromatography (HPLC) stationary phases, in comparison with ordinary MIPs. This effect of molecular imprinting was retained even after the surface modification of MIPs. The MIPs employed as pretreatment media for a column‐switching HPLC system provided a detection limit as low as 1 ng/L (ppt) by electrochemical detection. Actual samples, including Suwannee River natural organic matter (NOM), were analyzed for BPA, and BPA was quantitatively detected in NOM even with the combination with widely used UV detection because of the effective removal of interference afforded by an effective surface modification of the MIPs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2048–2060, 2005     

Direct injection analysis of bisphenol A in serum by combination of isotope imprinting with liquid chromatography-mass spectrometry

A restricted access media-molecularly imprinted polymer was prepared using bisphenol A (BPA)-d16 as a template molecule, and was successfully applied to direct injection analysis of BPA in serum combined with column-switching LC-MS.     

Molecularly imprinted polymers for triazine herbicides prepared by multi-step swelling and polymerization method. Their application to the determination of methylthiotriazine herbicides in river water

Uniformly-sized, molecularly imprinted polymers (MIPs) for atrazine, ametryn and irgarol were prepared by a multi-step swelling and polymerization method using ethylene glycol dimethacrylate as a cross-linker and methacrylic acid (MAA), 2-(trifluoromethyl) acrylic acid (TFMAA) or 4-vinylpyridine either as a functional monomer or not. The MIP for atrazine prepared using MAA showed good molecular recognition abilities for chlorotriazine herbicides, while the MIPs for ametryn and irgarol prepared using TFMAA showed excellent molecular recognition abilities for methylthiotriazine herbicides. A restricted access media-molecularly imprinted polymer (RAM-MIP) for irgarol was prepared followed by in situ hydrophilic surface modification using glycerol dimethacrylate and glycerol monomethacrylate as hydrophilic monomers. The RAM-MIP was applied to selective pretreatment and enrichment of methylthiotriazine herbicides, simetryn, ametryn and prometryn, in river water, followed by their separation and UV detection via column-switching HPLC. The calibration graphs of these compounds showed good linearity in the range of 50-500 pg/mL (r > 0.999) with a 100 mL loading of a river water sample. The quantitation limits of simetryn, ametryn and prometryn were 50 pg/mL, and the detection limits were 25 pg/mL. The recoveries of simetryn, ametryn and prometryn at 50 pg/mL were 101%, 95.6% and 95.1%, respectively. This method was successfully applied for the simultaneous determination of simetryn, ametryn and prometryn in river water.     

Evaluation of an on-line coupled continuous flow liquid membrane extraction and precolumn system as trace enrichment technique by liquid chromatographic determination of bisphenol A

An on-line coupled continuous flow liquid membrane extraction (CFLME) and C₁₈ precolumn system was developed for sample preconcentration in liquid chromatography determination. After preconcentration by CFLME, which is based on the combination of continuous flow liquid–liquid extraction and supported liquid membrane, bisphenol A (BPA) was enriched in 960 μl of 1 mol l⁻¹ NaOH used as acceptor. This acceptor was on-line neutralized and transported onto the C₁₈ precolumn where analytes were absorbed and focused. Then the focused analytes were injected onto a C₁₈ analytical column for separation and detected at 220 nm with a diode array detector. CFLME related parameters such as flow rates, pH of donor and acceptor, and enrichment time were optimized. The proposed method presents a detection limit of 0.03 μg l⁻¹ (S/N=3) when 60 ml samples was enriched with an enrichment time of 30 min. Compared with C₁₈ based column-switching procedure, this proposed procedure presents similar sample throughput and lower detection limits. The proposed method was successfully applied to determine BPA in tap water, river water, and municipal sewage effluent samples.     

Liquid phase microextraction with in situ derivatization for measurement of bisphenol A in river water sample by gas chromatography-mass spectrometry

A new method that involves liquid phase microextraction (LPME) with in situ derivatization and gas chromatography-mass spectrometry (GC-MS) is described for the determination of trace amounts of bisphenol A (BPA) in river water samples. The LPME conditions, such as the type of extraction solvent and the extraction time, are investigated. Then, the extract is directly injected into GC-MS. The detection limit and the quantification limit of BPA in river water sample are 2 and 10pgml(-1) (ppt), respectively. The calibration curve for BPA is linear with a correlation coefficient of >0.999 in the range of 10-10,000pgml(-1). The average recoveries of BPA in river water samples spiked with 100 and 1000pgml(-1) BPA are 104.1 (RSD: 8.9%) and 98.3 (RSD: 3.2%), respectively, with correction using the added surrogate standard, bisphenol A-(13)C(12). This simple, accurate, sensitive and selective analytical method may be applicable to the determination of trace amounts of BPA in liquid samples.     

Highly selective stir bar coated with dummy molecularly imprinted polymers for trace analysis of bisphenol A in milk

A water compatible molecularly imprinted polymers (MIPs) coated stir bar for bisphenol A(BPA) was prepared with 3,3',5,5'-tetrabromobisphenol A as the dummy template molecule in this study. The dummy molecularly imprinted polymers coated stir bar (DMIPs-SB) showed better selectivity than the bars coated with polydimethylsiloxane or non-imprinted polymers when used to extract BPA and its three analogues. The saturated adsorption amount of the DMIPs coating was 3.0 times over that of the non-imprinted polymers coating. To achieve the optimum extraction performance, several parameters, including extraction and desorption time, pH value, adsorption temperature and stirring speed were investigated. The high-performance liquid chromatography combined with the DMIPs-SB was employed in the analysis of BPA in aqueous solution. The linear range of BPA concentration in aqueous medium was 0.0228-2.28 ng/mL with correlation coefficient of 0.9994 and the detection limit was about 6.84 × 10(-3) ng/mL based on three times ratio of signal to noise. This method was directly applied to the determination of trace BPA in milk with satisfactory results.     

高效液相色谱法测定环境水中超痕量双酚A

合成单分散双酚A(BPA)分子印迹微球并以其为高效液相色谱柱填充材料,建立了一种大体积直接进样HPLC法测定环境水中超痕量BPA的方法。方法的检出限(LOD)和测定限(LOQ)分别为0.03nmol/L和0.1nmol/L;在0.1~100nmol/L范围内具有良好的线性(r2=0.9983)。本方法用于表层湖水中BPA的检测,实际样品的加标回收率在99%~101.4%间;相对标准偏差(RSD%)低于8.1%(n=5)。     

Restricted access media-molecularly imprinted polymer for propranolol and its application to direct injection analysis of beta-blockers in biological fluids

A restricted access media-molecularly imprinted polymer (RAM-MIP) for propranolol (PRP) has been prepared for direct injection analysis of beta-blockers in biological fluids. First, the MIP for PRP was prepared using methacrylic acid and ethylene glycol dimethacrylate as the functional monomer and cross-linker, respectively, by a multi-step swelling and polymerization method. Next, a 1:1 mixture of glycerol monomethacrylate and glycerol dimethacrylate was used for hydrophilic surface modification, and added directly to the MIP for PRP after 4 h from the start of polymerization. Then further polymerization was carried out for 20 h. The obtained RAM-MIP for PRP showed excellent molecular recognition ability for PRP, good ones for alprenolol (ALP) and pindolol, and fair ones for other beta-blockers. The RAM-MIP was applied for direct injection analysis of ALP enantiomers in a rat plasma sample by a column-switching HPLC system using a beta-cyclodextrin phenylcarbamate-bonded silica column as the analytical column. The calibration graph, constructed from peak area versus each ALP enantiomer concentration, was linear with a correlation coefficient of > 0.999 over the concentration ranges of 12.5-250 ng ml(-1). The limit of quantitation was 12.5 ng ml(-1) with a 50 microl injection. This method could be applicable for the assay of ALP enantiomers at the therapeutic plasma levels, and have wide applicability for the assay of beta-blockers in biological fluids.     

HPLC column-switching technique for sample preparation and fluorescence determination of propranolol in urine using fused-core columns in both dimensions

A new and fast high-performance liquid chromatography (HPLC) column-switching method using fused-core columns in both dimensions for sample preconcentration and determination of propranolol in human urine has been developed. On-line sample pretreatment and propranolol preconcentration were performed on an Ascentis Express RP-C-18 guard column (5?×?4.6 mm), particle size, 2.7 μm, with mobile phase acetonitrile/water (5:95, v/v) at a flow rate of 2.0 mL min^?1 and at a temperature of 50 °C. Valve switch from pretreatment column to analytical column was set at 4.0 min in a back-flush mode. Separation of propranolol from other endogenous urine compounds was achieved on the fused-core column Ascentis Express RP-Amide (100?×?4.6 mm), particle size, 2.7 μm, with mobile phase acetonitrile/water solution of 0.5 % triethylamine, pH adjusted to 4.5 by means of glacial acetic acid (25:75, v/v), at a flow rate of 1.0 mL min^?1 and at a temperature of 50 °C. Fluorescence excitation/emission detection wavelengths were set at 229/338 nm. A volume of 1,500 μL of filtered urine sample solution was injected directly into the column-switching HPLC system. The total analysis time including on-line sample pretreatment was less than 8 min. The experimentally determined limit of detection of the method was found to be 0.015 ng mL^?1.

Trace level determination of polycyclic aromatic hydrocarbons in river water with automated pretreatment HPLC

A novel on‐line pretreatment pump‐injection HPLC system for polycyclic aromatic hydrocarbons is proposed. We report novel pump‐injection HPLC‐based on‐line SPE with a specially designed pretreatment column for the determination of trace amounts of chemical substances in surface water. Polycyclic aromatic hydrocarbons are well known for strong carcinogenicity and thus a severe concentration control is required for drinking water and/or river water, which is the main resource of tap water. We found it possible to detect ng/L levels of polycyclic aromatic hydrocarbons by using pump‐injection column switching HPLC with fluorescence detection. To avoid the phenomenon, in which polycyclic aromatic hydrocarbons can be often adsorbed on the surface of flow lines of HPLC by their highly hydrophobicity especially resin‐made parts in sample delivery pump, we employed “autodilution” device that provides reliable recovery and repeatability. Additionally, real water samples were collected and then the spiked polycyclic aromatic hydrocarbons were determined at ng/L levels.     

On-line solid phase extraction fast liquid chromatography–tandem mass spectrometry for the analysis of bisphenol A and its chlorinated derivatives in water samples

In this study an on-line column-switching fast LC–MS/MS method was developed to analyze bisphenol A (BPA) and its chlorinated derivatives in water. Fast liquid chromatographic separation was performed on a C18 reversed phase column based on fused-core particle technology (2.7 μm particle size) providing analysis times shorter than 3 min and high peak efficiencies. The main benefit of this LC system is that it can easily be hyphenated to a conventional on-line preconcentration device allowing the direct analysis of water samples without any pretreatment at concentrations levels down to 60 ng L⁻¹ and preventing contaminations frequently reported in the analysis of BPA. This on-line SPE fast LC system was coupled to a triple quadrupole mass spectrometer operating in enhanced mass resolution mode (Q1 FWHM = 0.7 Th, Q3 FWHM = 0.1 Th) in order to minimize interferences and chemical noise. This highly sensitive and selective method was successfully employed to analyze BPA and its chlorinated derivatives in water samples.