Photocatalytic Hydrogen Evolution by Oleic Acid‐Capped CdS,CdSe, and CdS0.75Se0.25 Alloy Nanocrystals

Photocatalytic generation of hydrogen by using oleic acid‐capped CdS, CdSe, and CdS_0.75Se_0.25 alloy nanocrystals (quantum dots) has been investigated under visible‐light irradiation by employing Na₂S and Na₂SO₃ as hole scavengers. Highly photostable CdS_0.75Se_0.25 alloy nanocrystals gave the highest hydrogen evolution rate (1466 μmol h^?1 g^?1), which was about three times higher than that of CdS and seven times higher than that of CdSe.     

Ordered dispersion of ZnO quantum dots in SiO2 matrix and its strong emission properties

ZnO nanoparticles in the form of quantum dots (QDs) have been dispersed in SiO₂ matrix using StÖber method to form ZnO QDs-SiO₂ nanocomposites. Addition of tetraethyl orthosilicate (TEOS) to an ethanolic solution of ZnO nanoparticles produces random dispersion. On the other hand, addition of ZnO nanoparticles to an already hydrolyzed ethanolic TEOS solution results in a chain-like ordered dispersion. The photoluminescence spectra of the as-grown nanocomposites show strong emission in the ultraviolet region. When annealed at higher temperature, depending on the sample type, these show strong red or white emission. Interestingly, when the excitation is removed, the orderly dispersed ZnO QDs-SiO₂ composite shows a very bright blue fluorescence visible by naked eyes for few seconds indicating their promise for display applications. The emission property has been explained in the light of structure–property relationship.     

Electrophoretic properties of BSA-coated quantum dots

Low toxic InP/ZnS quantum dots (QDs), ZnS:Mn²⁺/ZnS nanocrystals and CdSe/ZnS nanoparticles were rendered water-dispersible by different ligand-exchange methods. Eventually, they were coated with bovine serum albumin (BSA) as a model protein. All particles were characterised by isotachophoresis (ITP), laser Doppler velocimetry (LDV) and agarose gel electrophoresis. It was found that the electrophoretic mobility and colloidal stability of ZnS:Mn²⁺/ZnS and CdSe/ZnS nanoparticles, which bore short-chain surface ligands, was primarily governed by charges on the nanoparticles, whereas InP/ZnS nanocrystals were not charged per se. BSA-coated nanoparticles showed lower electrophoretic mobility, which was attributed to their larger size and smaller overall charge. However, these particles were colloidally stable. This stability was probably caused by steric stabilisation of the BSA coating.     

CdS and CdSe quantum dots subsectionally sensitized solar cells using a novel double-layer ZnO nanorod arrays

We report a novel approach for synthesizing CdS and CdSe quantum dots subsectionally sensitized double-layer ZnO nanorods for solar cells, which are comprised of CdS QDs-sensitized bottom-layer ZnO NRs and CdSe QDs-sensitized top-layer ZnO NRs. X-ray diffraction study and scanning electron microscopy analysis indicate that the solar cells of subsectionally sensitized double-layer ZnO NRs, which are the hexagonal wurtzite crystal structure, have been successfully achieved. The novel structure enlarged the range of absorbed light and enhanced the absorption intensity of light. The I-V characteristics show that the double-layer structure improved both the current density (J_sc) and fill factor (FF) by 50%, respectively, and power conversion efficiency (η) was increased to twice in comparison with the CdS QDs-sensitized structure.     

Light conversion efficiency of flower like structure TiO<Subscript>2</Subscript> thin film solar cells

Flower like structure TiO₂ thin films have been grown onto ITO coated glass substrates by sol–gel method. TiO₂ nano flowers have been sensitized using CdS quantum dots prepared using simple precursors by chemical method. The assembly of CdS quantum dots with TiO₂ nano flower has been used as photo-electrode in quantum dot sensitized solar cells. The surface morphology has been studied using scanning electron microscope; it shows that the film exhibits flower like structure. The absorption spectra reveals that the absorption edge of CdS quantum dot sensitized TiO₂ nano flower shifts towards longer wavelength side when compared to the absorption edge of TiO₂ nano flower. The efficiency of the fabricated CdS quantum dot sensitized TiO₂ nano flower based solar cell is 0.66%.     

Surface-modified CdSe quantum dots as luminescent probes for cyanide determination

Luminescent surface-modified CdSe semiconductor quantum dots (QDs), with nanoparticle (NP) size distribution in the order of 2-7 nm, have been synthesized for optical determination of cyanide ions. The nanoparticles have been functionalised with tert-butyl-N-(2-mercaptoethyl)-carbamate (BMC) groups and exhibit a strong fluorescent emission at about 580 nm with rather long fluorescence lifetimes (several hundred nanoseconds) in aerated methanolic solution. The observed luminescence emitted by the synthesized nanocrystals was tremendously increased by photo-activation under sunlight exposure. The functionalised QDs turned out to exhibit excellent long-term stability when stored in the dark (no significant changes in QDs luminescence emission intensity was observed even after two months from synthesis). The functionalisation of the NPs with carbamate ligand allowed a highly sensitive determination of free cyanide via analyte-induced changes in the photoluminescence (fluorescence quenching of intensity at 580 nm and lifetime changes) of the modified quantum dots (excited at 400 nm). A detection limit of 1.1 × 10⁻⁷ M (2.9 μg l⁻¹) of cyanide ions was obtained, while the interfering effect of other inorganic anions (including NO₃⁻, Cl⁻ or SCN⁻) was negligible even at 200-fold level concentrations in excess of cyanide.     

Influence of highly efficient PbS counter electrode on photovoltaic performance of CdSe quantum dots-sensitized solar cells

PbS electrode with high catalytic activity to S_n ^2? reduction certificated by the measurements of electrochemical impedance spectroscopy and cyclic voltammetry was prepared by a simple method. The high catalytic activity makes it be a low-cost alternative counter electrode to platinum (Pt) to be used in quantum dots-sensitized solar cells (QDSSCs) based on polysulfide electrolyte. The photovoltaic performance enhancement of the quantum dots (QDs)-sensitized semiconductor thin films due to the PbS counter electrode was evaluated by fabricating QDSSCs based on CdSe QDs-sensitized ZnO (SnO₂) thin film. CdSe QDs-sensitized ZnO thin film has the lower internal total series resistance and electron transmission time, the higher electron lifetime and electron collection efficiency than the CdSe QDs-sensitized SnO₂ thin film. Replacing the Pt counter electrode with the PbS counter electrode leads to more improvement on the short circuit photocurrent density for QDSSC based on the ZnO thin film than the SnO₂ thin film. Therefore, the process to limit the photovoltaic performance of CdSe QDs-sensitized solar cell and the possible way to improve the photovoltaic performance were analyzed.     

The fabrication of TiO<Subscript>2</Subscript> nanoparticle/ZnO nanowire arrays bi-filmed photoanode and their effect on dye-sensitized solar cells

Porous TiO₂ nanoparticles coated on ZnO nanowire arrays (TiO₂ NP/ZnO NW) as photoanode for dye-sensitized solar cell (DSSC) has been fabricated and investigated to improve the power conversion efficiency. The TiO₂ NP/ZnO NW photoanode consists of single crystalline ZnO NWs synthesized via hydrothermal method and porous TiO₂ NP film covered on the surface of ZnO NW arrays by screen printing technique. The effect of TiO₂ NPs thickness of the bi-filmed photoanode on the cell performance has been investigated, and TiO₂ NP/ZnO NW DSSC with NP thickness of ~5 μm exhibits the best efficiency of 4.68%, higher than 1.16% of ZnO NW DSSC and 3.18% of TiO₂ NPs DSSC, prepared and tested under identical conditions. The efficiency increase is attributed to the enlarged photocurrent, due to the greatly enhanced surface area for dye absorption and light harvesting efficiency resulted from TiO₂ NPs, and improved open-circuit voltage, due to reduced electron recombination by providing direct conduction pathway along ZnO NWs.     

Spectroscopic investigation of defect-state emission in CdSe quantum dots

CdSe quantum dots are the most studied Cd-based quantum dots with their high quantum yield, high photostability, narrow emission band, and easy synthesis procedure. They are frequently used to develop light emitting diode (LED) due to their unique photophysical properties; however, their narrow emission band causes a challenge to design white LEDs because white light emission requires emission in multiple wavelengths with broad emission bands. Here in this study, we developed CdSe quantum dots with a narrow band-edge emission band and broad defect-state emission band through a modified two-phase synthesis method. Our results revealed that defect-state emission is directly linked to the surface of quantum dots and can be excited through exciting surfactant around the quantum dot. The effect of surfactant on emission properties of CdSe quantum dots diminished upon growing a shell around CdSe quantum dots; as a result, surface-dependent defect-state emission cannot be observed in gradient heterogeneous alloyed CdS_xSe_1-x quantum dots.     

Synthesis of hybrid nanoparticles based on magnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles and luminescent CdS nanoparticles

A new approach to the synthesis of hybrid nanoparticles based on magnetic Fe₃O₄ nanoparticles and CdS quantum dots, combining magnetic and luminescence properties, has been suggested. Conditions for preparation of their stable aqueous suspensions have been found, and their optical properties have been studied. Nanocomposites produced at the molar ratio Fe₃O₄: CdS = 5: 1, which exhibited the luminescence properties) and gave stable aqueous suspensions, have turned out to be most promising. The results are evidence that the synthesized nanoparticles can be used for the development of visualizing agents for in vitro biomedical research.     

Nanojunction‐Mediated Photocatalytic Enhancement in Heterostructured CdS/ZnO,CdSe/ZnO,and CdTe/ZnO Nanocrystals

A series of highly efficient semiconductor nanocrystal (NC) photocatalysts have been synthesized by growing wurtzite‐ZnO tetrahedrons around pre‐formed CdS, CdSe, and CdTe quantum dots (QDs). The resulting contact between two small but high‐quality crystals creates novel CdX/ZnO heterostructured semiconductor nanocrystals (HSNCs) with extensive type‐II nanojunctions that exhibit more efficient photocatalytic decomposition of aqueous organic molecules under UV irradiation. Catalytic testing and characterization indicate that catalytic activity increases as a result of a combination of both the intrinsic chemistry of the chalcogenide anions and the heterojunction structure. Atomic probe tomography (APT) is employed for the first time to probe the spatial characteristics of the nanojunction between cadmium chalcogenide and ZnO crystalline phases, which reveals various degrees of ion exchange between the two crystals to relax large lattice mismatches. In the most extreme case, total encapsulation of CdTe by ZnO as a result of interfacial alloying is observed, with the expected advantage of facilitating hole transport for enhanced exciton separation during catalysis.     

Single-step solvothermal synthesis of mesoporous anatase TiO<Subscript>2</Subscript>-reduced graphene oxide nanocomposites for the abatement of organic pollutants

In the present work, we have fabricated a novel mesoporous TiO₂–rGO nanocomposite by a facile one-step solvothermal method using titanic sulfate as the TiO₂ source. The as-prepared composites were characterized by transmission electron microscopy, X-ray diffraction; UV–Vis diffuse reflectance spectra, X-ray photoelectron spectroscopy and photoluminence spectra. In situ nucleation and anchoring of TiO₂ nanoparticles onto a graphene sheet is favorable fpr forming an intimate interfacial contact, and the chemically bonded TiO₂–rGO nanocomposites commendably enhanced their photocatalytic activity in the photodegradation of rhodamine B and phenol. The high photocatalytic activity of the as-synthesized nanocomposites are primarily ascribed to the mesoporous structure, efficient charge transportation and separation with enhanced visible light absorption, which come from the appealing nanoarchitecture, for instance, ultra-dispersed and ultra-small TiO₂ nanocrystals along with intimate and absolute interfacial contact between the TiO₂ nanocrystals and the graphene sheet.     

Nanojunction‐Mediated Photocatalytic Enhancement in Heterostructured CdS/ZnO,CdSe/ZnO,and CdTe/ZnO Nanocrystals

A series of highly efficient semiconductor nanocrystal (NC) photocatalysts have been synthesized by growing wurtzite‐ZnO tetrahedrons around pre‐formed CdS, CdSe, and CdTe quantum dots (QDs). The resulting contact between two small but high‐quality crystals creates novel CdX/ZnO heterostructured semiconductor nanocrystals (HSNCs) with extensive type‐II nanojunctions that exhibit more efficient photocatalytic decomposition of aqueous organic molecules under UV irradiation. Catalytic testing and characterization indicate that catalytic activity increases as a result of a combination of both the intrinsic chemistry of the chalcogenide anions and the heterojunction structure. Atomic probe tomography (APT) is employed for the first time to probe the spatial characteristics of the nanojunction between cadmium chalcogenide and ZnO crystalline phases, which reveals various degrees of ion exchange between the two crystals to relax large lattice mismatches. In the most extreme case, total encapsulation of CdTe by ZnO as a result of interfacial alloying is observed, with the expected advantage of facilitating hole transport for enhanced exciton separation during catalysis.     

Quantum dot doped solid polymer electrolyte for device application

ZnS capped CdSe quantum dots embedded in PEO:KI:I₂ polymer electrolyte matrix have been synthesized and characterized for dye sensitized solar cell (DSSC) application. The complex impedance spectroscopy shows enhance in ionic conductivity (σ) due to charges provide by quantum dots (QD) while AFM affirm the uniform distribution of QD into polymer electrolyte matrix. Cyclic voltammetry revealed the possible interaction between polymer electrolyte, QD and iodide/iodine. The photovoltaic performances of the DSSC containing quantum dots doped polymer electrolyte was also found to improve.     

Effect of the electric field on the oxide layer structure and the product composition in the reaction of zinc with supercritical fluid H<Subscript>2</Subscript>O/CO<Subscript>2</Subscript>

The presence of a constant electric field (300 kV m–1) and variation of CO₂ concentration in the fluid affected the morphology of ZnO nanocrystals and the internal structure of ZnO layer obtained on interacting zinc anode with supercritical H₂O/CO₂ at 673 K and 35 MPa. The electric field favors the formation of zinc oxalate and carbonate, the thermal decomposition of which forms the pore structured of ZnO. Moreover, a fraction of elongated nanocrystals in the surface layer of ZnO is increased due to the action of the electric field.     

Synthesis and characterization of monodisperse CdSe quantum dots in different organic solvents

Nearly monodisperse CdSe quantum dots (QDs) have been prepared by a soft solution approach using air-stable reagents in different organic solvents. This scheme is a supplement to the conventional thermal decomposition of organometallic compounds at higher temperatures. CdSe nanocrystals of different sizes could be obtained by simply changing the solvent. This method is reproducible and simple and thus can be readily scaled up for industrial production. The reaction process was monitored by the temporal evolution of the UV-Vis absorption and room temperature photoluminensce spectra. The structures of the CdSe quantum dots were determined by X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). The phase-transfer of oleic acid-stabilized CdSe nanocrystals into PBS buffer solutions was also studied for their potentials in biological applications. __________ Translated from Journal of Shanghai Jiaotong University, 2005, 39(1) (in Chinese)     

Special features of formation of nanocrystalline BiFeO<Subscript>3</Subscript> via the glycine-nitrate combustion method

Nanocrystalline bismuth orthoferrite has been synthesized under conditions of glycine-nitrate combustion. Temperatures of activation of formation and growth of BiFeO₃ nanocrystals have been shown to correlate with melting temperature of surface (non-autonomous) phases. Optimal temperature of synthesis of nanocrystalline bismuth orthoferrite has been determined.     

Biomimetic Synthesis of CdSe Quantum Dots through Emulsion Liquid Membrane System of Gas-Liquid Transport

The cadmium selenide quantum dots (QD) have been synthesized by template-control in an emulsion fiquid membrane system. The system consisted of kerosene as solvent, L152 (dialkylene succinimide) as surfactant,N7301 (trialiphatic amine, R3N, R=C8-C10) as carrier, 0.1mol/L CdCl2 solution as internal-aqueous phase and H2Se gas as external phase. Additive organic template agent in internal-aqueous phase was necessary to form CdSe QD. The influence of the nature of template and its concentration on sizes of the formed CdSe QD has also been studied. Transmission electron microscopy showed that the sizes of the products could be controlled down to 3-4nm. X-ray diffraction analysis revealed that the crystals had cubic structure. The formation process and the optical properties of CdSe QD have also been presented.     

PVA在提高TiO2/CdSe异质结光催化活性与抗光腐蚀性能方面的应用及机理

通过阳极氧化法和电化学沉积制备了TiO_2/CdSe异质结膜,并通过旋涂结合后续热处理的方法,在TiO_2/CdSe异质结膜上制备适量脱水态的聚乙烯醇(PVA)来提高TiO_2/CdSe异质结抗光腐蚀性能。采用XRD,SEM,FTIR,UV-Vis,PL,电化学测试,光催化降解罗丹明B等方法对样品的晶体结构、微观形貌、光电化学性能、光催化性能等进行了表征,并通过测定光降解体系中Cd2+的浓度,研究了纳米复合材料的抗光腐蚀性能。结果表明,与TiO_2/CdSe相比,TiO_2/CdSe/PVA纳米复合材料不仅具有更好的可见光光催化活性,还具有良好的可见光光催化稳定性和抗光腐蚀性能。同时,PVA的存在对光催化反应中的二次污染物Cd2+也有抑制作用。