复杂加载下混凝土的弹塑性本构模型

混凝土材料在不同应力路径下或复杂加载条件下会表现出差异性显著的应力应变关系,在小幅循环加载条件下,其应力应变关系会表现出类似于弹性变形的滞回曲线.在不同应力水平下,混凝土的应力应变关系以及破坏特性都具有静水压力相关特点,即随着静水压力增大,各向异性强度特性弱化.此外,混凝土受压及受拉破坏机理不同,因而对应于混凝土硬化损伤亦有不同,即可分为受压硬化损伤,受拉硬化损伤及两者的混合硬化损伤类型.基于Hsieh模型,对该模型进行了三点改进.（1）针对小幅循环加载下混凝土无塑性变形的试验规律,而模型中在应力水平较低的循环加载条件下始终存在塑性变形的预测问题,采用在边界面模型框架下,设置了应力空间的弹性域,初始屈服面与后续临界状态屈服面几何相似的假定.（2）基于广义非线性强度准则将原模型采用变换应力方法将其推广为三维弹塑性本构模型,采用变换后模型可合理的考虑不同应力路径对于子午面以及偏平面上静水压力效应形成的影响,并避免了边界面应力点奇异问题.（3）分别对拉压两种加载损伤模式建议了相应的硬化参数表达式,可分别用于描述上述加载中产生的应变软化及强度退化行为.基于多种加载路径模拟表明:所建立的三维弹塑性本构模型可合理地用于描述混凝土的一般应力应变关系特性.      

Anisotropic damage–plasticity model for concrete

A material model for concrete is proposed here within the framework of a thermodynamically consistent elasto-plasticity–damage theory. Two anisotropic damage tensors and two damage criteria are adopted to describe the distinctive degradation of the mechanical properties of concrete under tensile and compressive loadings. The total stress tensor is decomposed into tensile and compressive components in order to accommodate the need for the above mentioned damage tensors. The plasticity yield criterion presented in this work accounts for the spectral decomposition of the stress tensor and allows multiple hardening rules to be used. This plastic yield criterion is used simultaneously with the damage criteria to simulate the physical behavior of concrete. Non-associative flow rule for the plastic strains is used to account for the dilatancy of concrete as a frictional material. The thermodynamic Helmholtz free energy concept is used to consistently derive dissipation potentials for damage and plasticity and to allow evolution laws for different hardening parameters. The evolution of the two damage tensors is accounted for through the use of fracture-energy-based continuum damage mechanics. An expression is derived for the damage–elasto-plastic tangent operator. The theoretical framework of the model is described here while the implementation of this model will be discussed in a subsequent paper.     

A plasticity and anisotropic damage model for plain concrete

A plastic-damage constitutive model for plain concrete is developed in this work. Anisotropic damage with a plasticity yield criterion and a damage criterion are introduced to be able to adequately describe the plastic and damage behavior of concrete. Moreover, in order to account for different effects under tensile and compressive loadings, two damage criteria are used: one for compression and a second for tension such that the total stress is decomposed into tensile and compressive components. Stiffness recovery caused by crack opening/closing is also incorporated. The strain equivalence hypothesis is used in deriving the constitutive equations such that the strains in the effective (undamaged) and damaged configurations are set equal. This leads to a decoupled algorithm for the effective stress computation and the damage evolution. It is also shown that the proposed constitutive relations comply with the laws of thermodynamics. A detailed numerical algorithm is coded using the user subroutine UMAT and then implemented in the advanced finite element program ABAQUS. The numerical simulations are shown for uniaxial and biaxial tension and compression. The results show very good correlation with the experimental data.     

准脆性材料的弹塑性各向异性损伤耦合本构模型研究

针对准脆性材料的非线性特征：强度软化和刚度退化、单边效应、侧限强化和拉压软化、不可恢复变形、剪胀及非弹性体胀,在热动力学框架内,建立了准脆性材料的弹塑性与各向异性损伤耦合的本构关系。对准脆性材料的变形机理和损伤诱发的各向异性进行了诠释,并给出了损伤构形和有效构形中各物理量之间的关系。在有效应力空间内,建立了塑性屈服准则、拉压不同的塑性随动强化法则和各向同性强化法则。在损伤构形中,采用应变能释放率,建立了拉压损伤准则、拉压不同的损伤随动强化法则和各向同性强化法则。基于塑性屈服准则和损伤准则,构建了塑性势泛函和损伤势泛函,并由正交性法则,给出了塑性和损伤强化效应内变量的演化规律,同时,联立塑性屈服面和损伤加载面,给出了塑性流动和损伤演化内变量的演化法则。将损伤力学和塑性力学结合起来,建立了应变驱动的应力-应变增量本构关系,给出了本构数值积分的要点。以单轴加载-卸载往复试验识别和校准了本构材料常数,并对单轴单调试验、单轴加载-卸载往复试验、二轴受压、二轴拉压试验和三轴受压试验进行了预测,并与试验结果作了比较,结果表明,所建本构模型对准脆性材料的非线性材料性能有良好的预测能力。     

弹体贯穿混凝土数值模拟的改进材料模型

研究混凝土结构在冲击载荷下的力学特性对武器以及防护结构的设计和评估具有重要意义,而合适的材料模型可以更准确地预测混凝土结构的力学行为和破坏模式。因此,本文中提出了一种改进的混凝土塑性损伤材料模型来描述其在冲击载荷下的力学响应。该改进模型考虑了压力-体积应变关系、应变率效应、洛德角效应和塑性损伤累积对混凝土材料力学特性的影响,并引入了一个与损伤相关的硬化/软化函数来描述压缩状态下的应变硬化和软化行为。随后,通过对3个独立的强度面进行线性插值得到了该改进模型的破坏强度面,并采用部分关联流动法则考虑了混凝土材料的体积膨胀特性。最后,开展了单个单元在不同加载条件下和弹体贯穿钢筋混凝土靶的数值模拟,验证了该改进模型的可行性、准确性以及预测性能提升。     

考虑微裂纹相互作用的的岩石微观力学弹塑性损伤模型研究

本文建立基于微裂纹扩展的岩石弹塑性损伤微观力学模型。用自洽方法考虑裂隙间相互影响,压缩载荷下微裂纹尖端翼裂纹稳定扩展表征岩石的微观损伤,基于应变能密度准则用Newton迭代法求复合型断裂的翼裂纹扩展长度,并采用微裂隙统计的二参数Weibull函数模型反映绝对体积应变对微裂纹分布数目影响,进而用翼裂纹扩展所表征的应力释放体积和微裂纹数目来表示含有微裂隙的岩石损伤演化变量;宏观塑性屈服函数采用Voyiadjis等的等效塑性应变的硬化函数,反映塑性内变量对硬化函数的影响;建立岩石的弹塑性损伤本构关系及其数值算法,并用回映隐式积分算法编制了弹塑性损伤模型的程序。从围压和微裂隙长度等因素分析弹塑性损伤模型的岩石的损伤和宏观塑性特性。     

考虑混凝土应变率变化的高拱坝非线性动力响应研究

提出一种新的应变率相关的混凝土非线性弹塑性损伤模型。采用此模型对混凝土拱坝的非线性地震响应作了分析。在综合考虑坝-地基-库水动力相互作用和坝缝非线性接触的基础上，着重研究了混凝土应交率相关效应及加载历史对混凝土极限强度等重要参数及拱坝响应的影响，并与采用不考虑应交率影响的混凝土损伤模型计算结果进行了对比分析。结果表明，拱坝考虑横缝作用后的坝面应变率分布不同于整体拱坝。应交率分布形态不仅可以很好地表征拱坝的振动形态，而且对于高拱坝的动力响应的影响也不可忽略。     

Simulation of damage evolution in ductile metals undergoing dynamic loading conditions

A set of constitutive equations for large rate-dependent elastic-plastic-damage materials at elevated temperatures is presented to be able to analyze adiabatic high strain rate deformation processes for a wide range of stress triaxialities. The model is based on the concepts of continuum damage mechanics. Since the material macroscopic thermo-mechanical response under large strain and high strain rate deformation loading is governed by different physical mechanisms, a multi-dissipative approach is proposed. It incorporates thermo-mechanical coupling effects as well as internal dissipative mechanisms through rate-dependent constitutive relations with a set of internal variables. In addition, the effect of stress triaxiality on the onset and evolution of plastic flow, damage and failure is discussed.Furthermore, the algorithm for numerical integration of the coupled constitutive rate equations is presented. It relies on operator split methodology resulting in an inelastic predictor-elastic corrector technique. The explicit finite element program LS-DYNA augmented by an user-defined material subroutine is used to approximate boundary-value problems under dynamic loading conditions. Numerical simulations of dynamic experiments with different specimens are performed and good correlation of numerical results and published experimental data is achieved. Based on numerical studies modified specimens geometries are proposed to be able to detect complex damage and failure mechanisms in Hopkinson-Bar experiments.     

Effects of the strain-hardening exponent on two-parameter characterizations of surface-cracks under large-scale yielding

The influence of strain hardening exponent on two-parameter J-Q near tip opening stress field characterization with modified boundary layer formulation and the corresponding validity limits are explored in detail. Finite element simulations of surface cracked plates under uniaxial tension are implemented for loads exceeding net-section yield. The results from this study provide numerical methodology for limit analysis and demonstrate the strong material dependencies of fracture parameterization under large scale yielding. Sufficient strain hardening is shown to be necessary to maintain J-Q predicted fields when plastic flow progresses through the remaining ligament. Lower strain hardening amplifies constraint loss due to stress redistribution in the plastic zone and increases the ratio of tip deformation to J. The onset of plastic collapse is marked by shape change and/or rapid relaxation of tip fields compared to those predicted by MBL solutions and thus defining the limits of J-Q dominance. A radially independent Q-parameter cannot be evaluated for the low strain hardening material at larger deformations within a range where both cleavage and ductile fracture mechanisms are present. The geometric deformation limit of near tip stress field characterization is shown to be directly proportional to the level of stress the material is capable of carrying within the plastic zone. Accounting for the strain hardening of a material provides a more adjusted and less conservative limit methodology compared to those generalized by the yield strength alone. Results from this study are of relevance to establishing testing standards for surface cracked tensile geometries.     

混凝土的弹塑性损伤双面本构模型

针对混凝土材料拉压应变空间下损伤机制的不同,结合连续损伤力学和塑性理论建立了一个全新的本构模型。该模型中损伤和塑性变形的演变由应变空间的同一个非弹性曲面来控制,但对拉压应变空间中非弹性曲面的演变分别采用了随动强化法则和各向同性演化规律。计算结果表明,该模型能较好地描述混凝土材料在单轴及多轴单调加载和低周反复荷载下的典型非线性特征。     

CDPM2: A damage-plasticity approach to modelling the failure of concrete

A constitutive model based on the combination of damage mechanics and plasticity is developed to analyse the failure of concrete structures. The aim is to obtain a model, which describes the important characteristics of the failure process of concrete subjected to multiaxial loading. This is achieved by combining an effective stress based plasticity model with a damage model based on plastic and elastic strain measures. The model response in tension, uni-, bi- and triaxial compression is compared to experimental results. The model describes well the increase in strength and displacement capacity for increasing confinement levels. Furthermore, the model is applied to the structural analyses of tensile and compressive failure.     

压缩载荷作用下岩石的细观损伤和塑性研究

建立岩石微裂纹扩展的细观力学模型,研究了岩石的细观损伤和塑性性质.压缩载荷下微裂纹尖端翼裂纹稳定扩展表征岩石的细观损伤,采用应变能密度准则求解复合型断裂的翼裂纹扩展长度,微裂隙统计的二参数Weibull函数模型反映绝对体积应变对微裂纹分布数目影响,进而用翼裂纹扩展所表征的应力释放体积和微裂纹数目来表示含有微裂隙的岩石损伤演化变量;宏观塑性屈服函数采用Voyiadjis等的等效塑性应变的硬化函数,反映了塑性内变量对硬化函数的影响;建立岩石模型的本构关系及其数值算法,并用回映隐式积分算法编制了模型的本构程序.分析弹塑性损伤模型的围压对岩石损伤的影响,并从围压和短微裂隙长度等因素分析模型的岩石的损伤和宏观塑性特性.     

THE USE OF VISCO-ELASTOPLASTIC DAMAGE CONSTITUTIVE MODEL TO SIMULATE NONLINEAR BEHAVIOR OF CONCRETE

A visco-elastoplastic damage constitutive model is proposed for simulating nonlinear behavior of concrete. Based on traditional plastic theory, the irreversible deformation is simulated in effective stress space. In order to reflect different stiffness degradation mechanism of concrete under tensile and compressive loading conditions, both tensile and compressive damage variables are introduced, and then on the basis of energy release rate, the model is firmly derived within the concept of irreversible thermodynamics. The rate-dependent model is considered by introducing viscous regularization into the inelastic strain and damage variable, and combined with an additional elastic condition. Fully implicit backward-Euler algorithm is used to perform constitutive integration. Results of numerical examples using the proposed model agree well with test results for specimens under uniaxial tension and compression, biaxial loading and triaxial loading. Failure processes of single-edge-notched (SEN) beam and double-edge-notched (DEN) specimen are also simulated to further validate the proposed model.     

Multiscale modeling of the plasticity in an aluminum single crystal

This paper describes a numerical, hierarchical multiscale modeling methodology involving two distinct bridges over three different length scales that predicts the work hardening of face centered cubic crystals in the absence of physical experiments. This methodology builds a clear bridging approach connecting nano-, micro- and meso-scales. In this methodology, molecular dynamics simulations (nanoscale) are performed to generate mobilities for dislocations. A discrete dislocations numerical tool (microscale) then uses the mobility data obtained from the molecular dynamics simulations to determine the work hardening. The second bridge occurs as the material parameters in a slip system hardening law employed in crystal plasticity models (mesoscale) are determined by the dislocation dynamics simulation results. The material parameters are computed using a correlation procedure based on both the functional form of the hardening law and the internal elastic stress/plastic shear strain fields computed from discrete dislocations. This multiscale bridging methodology was validated by using a crystal plasticity model to predict the mechanical response of an aluminum single crystal deformed under uniaxial compressive loading along the [4 2 1] direction. The computed strain-stress response agrees well with the experimental data.     

A coupled temperature and strain rate dependent yield function for dynamic deformations of bcc metals

A coupled temperature and strain rate microstructure physically based yield function is proposed in this work. It is incorporated along with the Clausius–Duhem inequality and an appropriate free energy definition in a general thermodynamic framework for deriving a three-dimensional kinematical model for thermo-viscoplastic deformations of body centered cubic (bcc) metals. The evolution equations are expressed in terms of the material time derivatives of the elastic strain, accumulated plastic strain (isotropic hardening), and the back stress conjugate tensor (kinematic hardening). The viscoplastic multipliers are obtained using both the Consistency and Perzyna viscoplasticity models. The athermal yield function is employed instead of the static yield function in the case of the Perzyna viscoplasticity model. It is found that the static strain rate value, at which the material shows rate-independent behavior, varies with the material deformation temperature. Computational aspects of the proposed model are addressed through the finite element implementation with an implicit stress integration algorithm. Finite element simulations are performed by implementing the proposed viscoplasticity constitutive models in the commercial finite element program ABAQUS/Explicit [ABAQUS, 2003. User Manual, Version 6.3. Habbitt, Karlsson and Sorensen Inc., Providence, RI] via the user material subroutine coded as VUMAT. Numerical implementation for a simple compression problem meshed with one element is used to validate the proposed model implementation with applications to tantalum, niobium, and vanadium at low and high strain rates and temperatures. The analysis of a tensile shear banding is also investigated to show the effectiveness and the performance of the proposed framework in describing the strain localizations at high velocity impact. Results show mesh independency as a result of the viscoplastic regularization used in the proposed formulation.     

Modeling transients in the mechanical response of copper due to strain path changes

When copper is deformed to large strains its texture and microstructure change drastically, leading to plastic anisotropy and extended transients when it is reloaded along a different strain path. For predicting these transients, we develop a constitutive model for polycrystalline metals that incorporates texture and grain microstructure. The directional anisotropy in the single crystals is considered to be induced by variable latent hardening associated with cross-slip, cut-through of planar dislocation walls, and dislocation-based reversal mechanisms. These effects are introduced in a crystallographic hardening model which is, in turn, implemented into a polycrystal model. This approach successfully explains the flow response of OFHC Cu pre-loaded in tension (compression) and reloaded in tension (compression), and the response of OFHC Cu severely strained in shear by equal channel angular extrusion and subsequently compressed in each of the three orthogonal directions. This new theoretical framework applies to arbitrary strain path changes, and is fully anisotropic.     

The effect of the irregular interface geometry in deformation and fracture of a steel substrate–boride coating composite

Presented in this paper is a computational analysis of the mechanisms involved in plastic deformation and fracture of a composite with coating under compressive and tensile loading. Using a steel specimen surface-hardened by diffusion borating, a role of the irregular geometry of the interface between the base material and hardened surface layer is investigated. In order to describe the mechanical behavior of the steel substrate and brittle coating, use is made of a plastic flow model including isotropic strain hardening and a fracture model, respectively. Using the Huber fracture criterion, the model takes into account the difference in the critical strength values for different types of local compressive and tensile states. It is shown that the irregular, serrated shape of the substrate–coating interface retards propagation of a longitudinal crack into this coating and prevents it from spalling under external compression of this composite. It is found out that even in the case of a simple uniaxial compression of the mesovolumes of this composite the boride “teeth” are subjected to tensile stresses, whose values are comparable with those of the external compressive load, and the direction of crack propagation and the general fracture behavior largely depend on the external loading conditions.     

THE VISUAL EXPERIMENTAL TEACHING METHOD FOR MATERIAL FAILURE1)

基于数字图像相关技术,提出材料破坏过程可视化的实验教学方法,并以混凝土材料为例,介绍该方法在劈拉与单轴压缩实验中的应用及其效果。通过监测混凝土劈拉与压缩破坏过程,分析了该材料破坏模式,揭示了混凝土材料劈拉与压缩破坏机理。应用数字图像相关方法获得试件表面应变场分布,验证了材料破坏机理,并提出适用的破坏强度理论。     

Modeling stress state dependent damage evolution in a cast Al–Si–Mg aluminum alloy

Internal state variable rate equations are cast in a continuum framework to model void nucleation, growth, and coalescence in a cast Al–Si–Mg aluminum alloy. The kinematics and constitutive relations for damage resulting from void nucleation, growth, and coalescence are discussed. Because damage evolution is intimately coupled with the stress state, internal state variable hardening rate equations are developed to distinguish between compression, tension, and torsion straining conditions. The scalar isotropic hardening equation and second rank tensorial kinematic hardening equation from the Bammann–Chiesa–Johnson (BCJ) Plasticity model are modified to account for hardening rate differences under tension, compression, and torsion. A method for determining the material constants for the plasticity and damage equations is presented. Parameter determination for the proposed phenomenological nucleation rate equation, motivated from fracture mechanics and microscale physical observations, involves counting nucleation sites as a function of strain from optical micrographs. Although different void growth models can be included, the McClintock void growth model is used in this study. A coalescence model is also introduced. The damage framework is then evaluated with respect to experimental tensile data of notched Al–Si–Mg cast aluminum alloy specimens. Finite element results employing the damage framework are shown to illustrate its usefulness.