Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

A facile photoetching approach is described that alleviates the negative effects from bulk defects by confining the oxygen vacancy (O_vac) at the surface of BiVO₄ photoanode, by 10‐minute photoetching. This strategy could induce enriched O_vac at the surface of BiVO₄, which avoids the formation of excessive bulk defects. A mechanism is proposed to explain the enhanced charge separation at the BiVO₄ /electrolyte interface, which is supported by density functional theory (DFT) calculations. The optimized BiVO₄ with enriched surface O_vac presents the highest photocurrent among undoped BiVO₄ photoanodes. Upon loading FeOOH/NiOOH cocatalysts, photoetched BiVO₄ photoanode reaches a considerable water oxidation photocurrent of 3.0 mA cm^?2 at 0.6 V vs. reversible hydrogen electrode. An unbiased solar‐to‐hydrogen conversion efficiency of 3.5 % is realized by this BiVO₄ photoanode and a Si photocathode under 1 sun illumination.     

General Preparation of Heme Protein Functional Fe3O4@Au‐Nps Magnetic Nanocomposite for Sensitive Detection of Hydrogen Peroxide

Stable magnetic nanocomposite of gold nanoparticles (Au‐NPs) decorating Fe₃O₄ core was successfully synthesized by the linker of Boc‐L‐cysteine. Transmission electron microscope (TEM), energy dispersive X‐ray spectroscopy (EDX) and cyclic voltammograms (CV) were performed to characterize the as‐prepared Fe₃O₄@Au‐Nps. The results indicated that Au‐Nps dispersed homogeneously around Fe₃O₄ with the ratio of Au to Fe₃O₄ nanoparticles as 5–10/1 and the apparent electrochemical area as 0.121 cm². After self‐assembly of hemoglobin (Hb) on Fe₃O₄@Au‐Nps by electrostatic interaction, a hydrogen peroxide biosensor was developed. The Fe₃O₄@Au‐Nps/Hb modified GCE exhibited fast direct electron transfer between heme center and electrode surface with the heterogeneous electron transfer rate constant (Ks ) of 3.35 s⁻¹. Importantly, it showed excellent electrocatalytic activity towards hydrogen peroxide reduction with low detection limit of 0.133 μM (S /D =3) and high sensitivity of 0.163 μA μM⁻¹, respectively. At the concentration evaluated, the interfering species of glucose, dopamine, uric acid and ascorbic acid did not affect the determination of hydrogen peroxide. These results demonstrated that the introduction of Au‐Nps on Fe₃O₄ not only stabilized the immobilized enzyme but also provided large surface area, fast electron transfer and excellent biocompatibility. This facile nanoassembly protocol can be extended to immobilize various enzymes, proteins and biomolecules to develop robust biosensors.     

Redox-Mediated Alcohol Oxidation Coupled to Hydrogen Gas Formation in a Dye-Sensitized Photosynthesis Cell

This work reports a dye-sensitized photoelectrochemical cell (DSPEC) that couples redox-mediated light-driven oxidative organic transformations to reductive hydrogen (H₂) formation. The DSPEC photoanode consists of a mesoporous anatase TiO₂ film on FTO (fluorine-doped tin oxide), sensitized with the thienopyrroledione-based dye AP11 , while H₂ was formed at a FTO-Pt cathode. Irradiation of the dye-sensitized photoanode transforms 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) to the oxidized TEMPO (TEMPO⁺), which acts as a chemical oxidant for the conversion of benzyl alcohol. The TEMPO^0/+ couple, previously used as redox mediator in DSSC, mediates efficient electron transfer from the organic substrate to the photo-oxidized dye. A DSPEC photoreactor was designed that allows in situ monitoring the reaction progress by infrared spectroscopy and gas chromatography. Sustained light-driven oxidation of benzyl alcohol to benzaldehyde within the DSPEC photoreactor, using of TEMPO as mediator, demonstrated the efficiency of the device, with a photocurrent of 0.4 mA cm⁻², approaching quantitative Faradaic efficiency and exhibiting excellent device stability.     

Solar‐Assisted eBiorefinery: Photoelectrochemical Pairing of Oxyfunctionalization and Hydrogenation Reactions

Inspired by natural photosynthesis, biocatalytic photoelectrochemical (PEC) platforms are gaining prominence for the conversion of solar energy into useful chemicals by combining redox biocatalysis and photoelectrocatalysis. Herein, we report a dual biocatalytic PEC platform consisting of a molybdenum (Mo)‐doped BiVO₄ (Mo:BiVO₄) photoanode and an inverse opal ITO (IO‐ITO) cathode that gives rise to the coupling of peroxygenase and ene‐reductase‐mediated catalysis, respectively. In the PEC cell, the photoexcited electrons generated from the Mo:BiVO₄ are transferred to the IO‐ITO and regenerate reduced flavin mononucleotides to drive ene‐reductase‐catalyzed trans‐hydrogenation of ketoisophrone to (R)‐levodione. Meanwhile, the photoactivated Mo:BiVO₄ evolves H₂O₂ in situ via a two‐electron water‐oxidation process with the aid of an applied bias, which simultaneously supplies peroxygenases to drive selective hydroxylation of ethylbenzene into enantiopure (R)‐1‐phenyl‐1‐hydroxyethane. Thus, the deliberate integration of PEC systems with redox biocatalytic reactions can simultaneously produce valuable chemicals on both electrodes using solar‐powered electrons and water.     

Boosting the photoelectrochemical water oxidation performance of bismuth vanadate by ZnCo2O4 nanoparticles

Due to the involvement of four-electron transfer process at photoanode,water oxidation is the ratelimiting step in water splitting reaction.To settle this dilemma,ZnCo₂ O₄ nanoparticles are combined with BiVO₄ to form a p-n ZnCo₂ O₄/BiVO₄ heterojunction photoanode,which is proved by an input voltage-output current test.The built-in electric field formed within the heterojunction structure promotes the effective separation of elect...     

Cyclic heterotetrameric and low‐dimensional hydrogen‐bonded polymeric structures in the morpholinium salts of ring‐substituted benzoic acid analogues

The morpholinium (tetrahydro‐2H‐1,4‐oxazin‐4‐ium) cation has been used as a counter‐ion in both inorganic and organic salt formation and particularly in metal complex stabilization. To examine the influence of interactive substituent groups in the aromatic rings of benzoic acids upon secondary structure generation, the anhydrous salts of morpholine with salicylic acid, C₄H₁₀NO⁺·C₇H₅O₃⁻, (I), 3,5‐dinitrosalicylic acid, C₄H₁₀NO⁺·C₇H₃N₂O₇⁻, (II), 3,5‐dinitrobenzoic acid, C₄H₁₀NO⁺·C₇H₃N₂O₆⁻, (III), and 4‐nitroanthranilic acid, C₄H₁₀NO⁺·C₇H₅N₂O₄⁻, (IV), have been prepared and their hydrogen‐bonded crystal structures are described. In the crystal structures of (I), (III) and (IV), the cations and anions are linked by moderately strong N—H…O_carboxyl hydrogen bonds, but the secondary structure propagation differs among the three, viz. one‐dimensional chains extending along [010] in (I), a discrete cyclic heterotetramer in (III), and in (IV), a heterotetramer with amine N—H…O hydrogen‐bond extensions along b, giving a two‐layered ribbon structure. With the heterotetramers in both (III) and (IV), the ion pairs are linked though inversion‐related N—H…O_carboxylate hydrogen bonds, giving cyclic R₄⁴(12) motifs. With (II), in which the anion is a phenolate rather than a carboxylate, the stronger assocation is through a symmetric lateral three‐centre cyclic R₁²(6) N—H…(O,O′) hydrogen‐bonding linkage involving the phenolate and nitro O‐atom acceptors of the anion, with extension through a weaker O—H…O_carboxyl hydrogen bond. This results in a one‐dimensional chain structure extending along [100]. In the structures of two of the salts [i.e. (II) and (IV)], there are also π–π ring interactions, with ring‐centroid separations of 3.5516 (9) and 3.7700 (9) Å in (II), and 3.7340 (9) Å in (IV).     

N—H...O,O—H...O hydrogen‐bonded supramolecular sheet formation in the bis(2‐aminoanilinium) fumarate, 3‐methylanilinium hydrogen fumarate and 4‐chloroanilinium hydrogen fumarate salts

In bis(2‐aminoanilinum) fumarate, 2C₆H₉N₂⁺·C₄H₂O₄²⁻, (I), the asymmetric unit consists of two aminoanilinium cations and one fumarate dianion, whereas in 3‐methylanilinium hydrogen fumarate, C₇H₁₀N⁺·C₄H₃O₄⁻, (II), and 4‐chloroanilinium hydrogen fumarate, C₆H₇ClN⁺·C₄H₃O₄⁻, (III), the asymmetric unit contains two symmetry‐independent hydrogen fumate anions and anilinium cations with a slight difference in their geometric parameters; the two salts are isostructural. In (II) and (III), the carboxylic acid H atoms of the anions are disordered across both ends of the anion, with equal site occupancies of 0.50. Both the 4‐chloroanilinium cations of (III) are disordered over two orientations with major occupancies fixed at 0.60 in each case. The hydrogen fumarate anions of (II) and (III) form one‐dimensional anionic chains linked through O—H...O hydrogen bonds. Salts (II) and (III) form two‐dimensional supramolecular sheets built from R₄⁴(16), R₄⁴(18), R₅⁵(25) and C₂²(14) motifs extending parallel to the (010) plane, whereas in (I), an (010) sheet is formed built from two R₄³(13) motifs, two R₂²(9) motifs and an R₄⁴(18) motif.     

Hydrogen bonding in 4‐nitrobenzene‐1,2‐diamine and two hydrohalide salts

The structures of 4‐nitrobenzene‐1,2‐diamine [C₆H₇N₃O₂, (I)], 2‐amino‐5‐nitroanilinium chloride [C₆H₈N₃O₂⁺·Cl⁻, (II)] and 2‐amino‐5‐nitroanilinium bromide monohydrate [C₆H₈N₃O₂⁺·Br⁻·H₂O, (III)] are reported and their hydrogen‐bonded structures described. The amine group para to the nitro group in (I) adopts an approximately planar geometry, whereas the meta amine group is decidedly pyramidal. In the hydrogen halide salts (II) and (III), the amine group meta to the nitro group is protonated. Compound (I) displays a pleated‐sheet hydrogen‐bonded two‐dimensional structure with R₂²(14) and R₄⁴(20) rings. The sheets are joined by additional hydrogen bonds, resulting in a three‐dimensional extended structure. Hydrohalide salt (II) has two formula units in the asymmetric unit that are related by a pseudo‐inversion center. The dominant hydrogen‐bonding interactions involve the chloride ion and result in R₄²(8) rings linked to form a ladder‐chain structure. The chains are joined by N—H...Cl and N—H...O hydrogen bonds to form sheets parallel to (010). In hydrated hydrohalide salt (III), bromide ions are hydrogen bonded to amine and ammonium groups to form R₄²(8) rings. The water behaves as a double donor/single acceptor and, along with the bromide anions, forms hydrogen bonds involving the nitro, amine, and ammonium groups. The result is sheets parallel to (001) composed of alternating R₅⁵(15) and R₆⁴(24) rings. Ammonium N—H...Br interactions join the sheets to form a three‐dimensional extended structure. Energy‐minimized structures obtained using DFT and MP2 calculations are consistent with the solid‐state structures. Consistent with (II) and (III), calculations show that protonation of the amine group meta to the nitro group results in a structure that is about 1.5 kJ mol⁻¹ more stable than that obtained by protonation of the para‐amine group. DFT calculations on single molecules and hydrogen‐bonded pairs of molecules based on structural results obtained for (I) and for 3‐nitrobenzene‐1,2‐diamine, (IV) [Betz & Gerber (2011). Acta Cryst. E 67 , o1359] were used to estimate the strength of the N—H...O(nitro) interactions for three observed motifs. The hydrogen‐bonding interaction between the pairs of molecules examined was found to correspond to 20–30 kJ mol⁻¹.     

Hydrogen‐bonded two‐ and three‐dimensional polymeric structures in the ammonium salts of 3,5‐dinitrobenzoic acid, 4‐nitrobenzoic acid and 2,4‐dichlorobenzoic acid

The structures of ammonium 3,5‐dinitrobenzoate, NH₄⁺·C₇H₃N₂O₆⁻, (I), ammonium 4‐nitrobenzoate dihydrate, NH₄⁺·C₇H₄NO₄⁻·2H₂O, (II), and ammonium 2,4‐dichlorobenzoate hemihydrate, NH₄⁺·C₇H₃Cl₂O₂⁻·0.5H₂O, (III), have been determined and their hydrogen‐bonded structures are described. All three salts form hydrogen‐bonded polymeric structures, viz. three‐dimensional in (I) and two‐dimensional in (II) and (III). With (I), a primary cation–anion cyclic association is formed [graph set R₄³(10)] through N—H...O hydrogen bonds, involving a carboxylate group with both O atoms contributing to the hydrogen bonds (denoted O,O′‐carboxylate) on one side and a carboxylate group with one O atom involved in two hydrogen bonds (denoted O‐carboxylate) on the other. Structure extension involves N—H...O hydrogen bonds to both carboxylate and nitro O‐atom acceptors. With structure (II), the primary inter‐species interactions and structure extension into layers lying parallel to (001) are through conjoined cyclic hydrogen‐bonding motifs, viz.R₄³(10) (one cation, an O,O′‐carboxylate group and two water molecules) and centrosymmetric R₄²(8) (two cations and two water molecules). The structure of (III) also has conjoined R₄³(10) and centrosymmetric R₄²(8) motifs in the layered structure but these differ in that the first motif involves one cation, an O,O′‐carboxylate group, an O‐carboxylate group and one water molecule, and the second motif involves two cations and two O‐carboxylate groups. The layers lie parallel to (100). The structures of salt hydrates (II) and (III), displaying two‐dimensional layered arrays through conjoined hydrogen‐bonded nets, provide further illustration of a previously indicated trend among ammonium salts of carboxylic acids, but the anhydrous three‐dimensional structure of (I) is inconsistent with that trend.     

4,4′‐Bi(1H‐pyrazol‐2‐ium) tetrachloridoaurate(III) chloride: a three‐dimensional cationic cooperite‐like framework with multiple pyrazolium–chloride hydrogen‐bonding interactions

In the title compound, (C₆H₈N₄)[AuCl₄]Cl, the 4,4′‐bi(1H‐pyrazol‐2‐ium) dication, denoted [H₂bpz]²⁺, is situated across a centre of inversion, the [AuCl₄]⁻ anion lies across a twofold axis passing through Cl—Au—Cl, and the Cl⁻ anion resides on a twofold axis. Conventional N—H...Cl hydrogen bonding [N...Cl = 3.109 (3) and 3.127 (3) Å, and N—H...Cl = 151 and 155°] between [H₂bpz]²⁺ cations (square‐planar node) and chloride anions (tetrahedral node), as complementary donors and acceptors of four hydrogen bonds, leads to a three‐dimensional binodal four‐connected framework with cooperite topology (three‐letter notation pts). The framework contains channels along the c axis housing one‐dimensional stacks of square‐planar [AuCl₄]⁻ anions [Au—Cl = 2.2895 (10)–2.2903 (16) Å; interanion Au...Cl contact = 3.489 (2) Å], which are excluded from primary hydrogen bonding with the [H₂bpz]²⁺ tectons.     

Boosting charge separation of BiVO4 photoanode modified with 2D metal-organic frameworks nanosheets for high-performance photoelectrochemical water splitting

Water splitting by photoelectrochemical (PEC) processes to convert solar energy into hydrogen energy using semiconductors is regarded as one of the most ideal methods to solve the current energy crisis and has attracted widespread attention. Herein, Co-based metal-organic framework (Co(bpdc)(H₂O)₄ (Co-MOF) nanosheets as passivation layers were in-situ constructed on the surface of BiVO₄ films through an uncomplicated hydrothermal method (Co-MOF/BiVO₄). Under AM 1.5G illumination, synthesized Co-MOF/BiVO₄ electrode exhibited a 4-fold higher photocurrent than bare BiVO₄, measuring 6.0 mA/cm² at 1.23 V vs. RHE in 1 mol/L potassium borate electrolyte (pH 9.5) solution. Moreover, the Co-MOF/BiVO₄ film demonstrated a 96% charge separation efficiency, a result caused by an inhibited recombination rate of photogenerated electrons and holes by the addition of Co-MOF nanosheets. This work provides an idea for depositing inexpensive 2D Co-MOF nanosheets on the photoanode as an excellent passivation layer for solar fuel production.     

Three‐dimensional hydrogen‐bonded structures in the hydrated proton‐transfer salts of isonipecotamide with the dicarboxylic oxalic and adipic acid homologues

The structures of the 1:1 hydrated proton‐transfer compounds of isonipecotamide (piperidine‐4‐carboxamide) with oxalic acid, 4‐carbamoylpiperidinium hydrogen oxalate dihydrate, C₆H₁₃N₂O⁺·C₂HO₄⁻·2H₂O, (I), and with adipic acid, bis(4‐carbamoylpiperidinium) adipate dihydrate, 2C₆H₁₃N₂O⁺·C₆H₈O₄²⁻·2H₂O, (II), are three‐dimensional hydrogen‐bonded constructs involving several different types of enlarged water‐bridged cyclic associations. In the structure of (I), the oxalate monoanions give head‐to‐tail carboxylic acid O—H...O_carboxyl hydrogen‐bonding interactions, forming C(5) chain substructures which extend along a. The isonipecotamide cations also give parallel chain substructures through amide N—H...O hydrogen bonds, the chains being linked across b and down c by alternating water bridges involving both carboxyl and amide O‐atom acceptors and amide and piperidinium N—H...O_carboxyl hydrogen bonds, generating cyclic R₄³(10) and R₃²(11) motifs. In the structure of (II), the asymmetric unit comprises a piperidinium cation, half an adipate dianion, which lies across a crystallographic inversion centre, and a solvent water molecule. In the crystal structure, the two inversion‐related cations are interlinked through the two water molecules, which act as acceptors in dual amide N—H...O_water hydrogen bonds, to give a cyclic R₄²(8) association which is conjoined with an R₄⁴(12) motif. Further N—H...O_water, water O—H...O_amide and piperidinium N—H...O_carboxyl hydrogen bonds give the overall three‐dimensional structure. The structures reported here further demonstrate the utility of the isonipecotamide cation as a synthon for the generation of stable hydrogen‐bonded structures. The presence of solvent water molecules in these structures is largely responsible for the non‐occurrence of the common hydrogen‐bonded amide–amide dimer, promoting instead various expanded cyclic hydrogen‐bonding motifs.     

A Hydrogen Farm Strategy for Scalable Solar Hydrogen Production with Particulate Photocatalysts

Scalable solar hydrogen production by water splitting using particulate photocatalysts is promising for renewable energy utilization. However, photocatalytic overall water splitting is challenging owing to slow water oxidation kinetics, severe reverse reaction, and H₂/O₂ gas separation. Herein, mimicking nature photosynthesis, a practically feasible approach named Hydrogen Farm Project (HFP) is presented, which is composed of solar energy capturing and hydrogen production subsystems integrated by a shuttle ion loop, Fe³⁺/Fe²⁺. Well‐defined BiVO₄ crystals with precisely tuned {110}/{010} facets are ideal photocatalysts to realize the HFP, giving up to 71 % quantum efficiency for photocatalytic water oxidation and full forward reaction with nearly no reverse reaction. An overall solar‐to‐chemical efficiency over 1.9 % and a solar‐to‐hydrogen efficiency exceeding 1.8 % could be achieved. Furthermore, a scalable HFP panel for solar energy storage was demonstrated under sunlight outdoors.     

Hydrogen bonding in two ammonium salts of 5‐sulfosalicylic acid: ammonium 3‐carboxy‐4‐hydroxybenzenesulfonate monohydrate and triammonium 3‐carboxy‐4‐hydroxybenzenesulfonate 3‐carboxylato‐4‐hydroxybenzenesulfonate

The structures of two ammonium salts of 3‐carboxy‐4‐hydroxybenzenesulfonic acid (5‐sulfosalicylic acid, 5‐SSA) have been determined at 200 K. In the 1:1 hydrated salt, ammonium 3‐carboxy‐4‐hydroxybenzenesulfonate monohydrate, NH₄⁺·C₇H₅O₆S⁻·H₂O, (I), the 5‐SSA⁻ monoanions give two types of head‐to‐tail laterally linked cyclic hydrogen‐bonding associations, both with graph‐set R₄⁴(20). The first involves both carboxylic acid O—H...O_water and water O—H...O_sulfonate hydrogen bonds at one end, and ammonium N—H...O_sulfonate and N—H...O_carboxy hydrogen bonds at the other. The second association is centrosymmetric, with end linkages through water O—H...O_sulfonate hydrogen bonds. These conjoined units form stacks down c and are extended into a three‐dimensional framework structure through N—H...O and water O—H...O hydrogen bonds to sulfonate O‐atom acceptors. Anhydrous triammonium 3‐carboxy‐4‐hydroxybenzenesulfonate 3‐carboxylato‐4‐hydroxybenzenesulfonate, 3NH₄⁺·C₇H₄O₆S²⁻·C₇H₅O₆S⁻, (II), is unusual, having both dianionic 5‐SSA²⁻ and monoanionic 5‐SSA⁻ species. These are linked by a carboxylic acid O—H...O hydrogen bond and, together with the three ammonium cations (two on general sites and the third comprising two independent half‐cations lying on crystallographic twofold rotation axes), give a pseudo‐centrosymmetric asymmetric unit. Cation–anion hydrogen bonding within this layered unit involves a cyclic R₃³(8) association which, together with extensive peripheral N—H...O hydrogen bonding involving both sulfonate and carboxy/carboxylate acceptors, gives a three‐dimensional framework structure. This work further demonstrates the utility of the 5‐SSA⁻ monoanion for the generation of stable hydrogen‐bonded crystalline materials, and provides the structure of a dianionic 5‐SSA²⁻ species of which there are only a few examples in the crystallographic literature.     

The hydrogen‐bonded complex bis(tert‐butylammonium) 2,6‐dichlorophenolate 2,4‐dichlorophenol–2,4‐dichlorophenolate tetrahydrofuran disolvate containing a chiral R53(10) hydrogen‐bonded ring as a supramolecular synthon

A fixed hydrogen‐bonding motif with a high probability of occurring when appropriate functional groups are involved is described as a `supramolecular hydrogen‐bonding synthon'. The identification of these synthons may enable the prediction of accurate crystal structures. The rare chiral hydrogen‐bonding motif R₅³(10) was observed previously in a cocrystal of 2,4,6‐trichlorophenol, 2,4‐dichlorophenol and dicyclohexylamine. In the title solvated salt, 2C₄H₁₂N⁺·C₆H₃Cl₂O⁻·(C₆H₃Cl₂O⁻·C₆H₄Cl₂O)·2C₄H₈O, five components, namely two tert‐butylammonium cations, one 2,4‐dichlorophenol molecule, one 2,4‐dichlorophenolate anion and one 2,6‐dichlorophenolate anion, are bound by N—H…O and O—H…O hydrogen bonds to form a hydrogen‐bonded ring, with the graph‐set motif R₅³(10), which is further associated with two pendant tetrahydrofuran molecules by N—H…O hydrogen bonds. The hydrogen‐bonded ring has internal symmetry, with a twofold axis running through the centre of the 2,6‐dichlorophenolate anion, and is isostructural with a previous and related structure formed from 2,4‐dichlorophenol, dicyclohexylamine and 2,4,6‐trichlorophenol. In the title crystal, helical columns are built by the alignment and twisting of the chiral hydrogen‐bonded rings, along and across the c axis, and successive pairs of rings are associated with each other through C—H…π interactions. Neighbouring helical columns are inversely related and, therefore, no chirality is sustained, in contrast to the previous case.     

Supramolecular hydrogen‐bonding patterns in salts of the antifolate drugs trimethoprim and pyrimethamine

Nine salts of the antifolate drugs trimethoprim and pyrimethamine, namely, trimethoprimium [or 2,4‐diamino‐5‐(3,4,5‐trimethoxybenzyl)pyrimidin‐1‐ium] 2,5‐dichlorothiophene‐3‐carboxylate monohydrate (TMPDCTPC, 1:1), C₁₄H₁₉N₄O₃⁺·C₅HCl₂O₂S⁻, ( I ), trimethoprimium 3‐bromothiophene‐2‐carboxylate monohydrate, (TMPBTPC, 1:1:1), C₁₄H₁₉N₄O₃⁺·C₅H₂BrO₂S⁻·H₂O, ( II ), trimethoprimium 3‐chlorothiophene‐2‐carboxylate monohydrate (TMPCTPC, 1:1:1), C₁₄H₁₉N₄O₃⁺·C₅H₂ClO₂S⁻·H₂O, ( III ), trimethoprimium 5‐methylthiophene‐2‐carboxylate monohydrate (TMPMTPC, 1:1:1), C₁₄H₁₉N₄O₃⁺·C₆H₅O₂S⁻·H₂O, ( IV ), trimethoprimium anthracene‐9‐carboxylate sesquihydrate (TMPAC, 2:2:3), C₁₄H₁₉N₄O₃⁺·C₁₅H₉O₂⁻·1.5H₂O, ( V ), pyrimethaminium [or 2,4‐diamino‐5‐(4‐chlorophenyl)‐6‐ethylpyrimidin‐1‐ium] 2,5‐dichlorothiophene‐3‐carboxylate (PMNDCTPC, 1:1), C₁₂H₁₄ClN₄⁺·C₅HCl₂O₂S⁻, ( VI ), pyrimethaminium 5‐bromothiophene‐2‐carboxylate (PMNBTPC, 1:1), C₁₂H₁₄ClN₄⁺·C₅H₂BrO₂S⁻, ( VII ), pyrimethaminium anthracene‐9‐carboxylate ethanol monosolvate monohydrate (PMNAC, 1:1:1:1), C₁₂H₁₄ClN₄⁺·C₁₅H₉O₂⁻·C₂H₅OH·H₂O, ( VIII ), and bis(pyrimethaminium) naphthalene‐1,5‐disulfonate (PMNNSA, 2:1), 2C₁₂H₁₄ClN₄⁺·C₁₀H₆O₆S₂²⁻, ( IX ), have been prepared and characterized by single‐crystal X‐ray diffraction. In all the crystal structures, the pyrimidine N1 atom is protonated. In salts ( I )–( III ) and ( VI )–( IX ), the 2‐aminopyrimidinium cation interacts with the corresponding anion via a pair of N—H…O hydrogen bonds, generating the robust R₂²(8) supramolecular heterosynthon. In salt ( IV ), instead of forming the R₂²(8) heterosynthon, the carboxylate group bridges two pyrimidinium cations via N—H…O hydrogen bonds. In salt ( V ), one of the carboxylate O atoms bridges the N1—H group and a 2‐amino H atom of the pyrimidinium cation to form a smaller R₂¹(6) ring instead of the R₂²(8) ring. In salt ( IX ), the sulfonate O atoms mimic the role of carboxylate O atoms in forming an R₂²(8) ring motif. In salts ( II )–( IX ), the pyrimidinium cation forms base pairs via a pair of N—H…N hydrogen bonds, generating a ring motif [R₂²(8) homosynthon]. Compounds ( II ) and ( III ) are isomorphous. The quadruple DDAA (D = hydrogen‐bond donor and A = hydrogen‐bond acceptor) array is observed in ( I ). In salts ( II )–( IV ) and ( VI )–( IX ), quadruple DADA arrays are present. In salts ( VI ) and ( VII ), both DADA and DDAA arrays co‐exist. The crystal structures are further stabilized by π–π stacking interactions [in ( I ), ( V ) and ( VII )–( IX )], C—H…π interactions [in ( IV )–( V ) and ( VII )–( IX )], C—Br…π interactions [in ( II )] and C—Cl…π interactions [in ( I ), ( III ) and ( VI )]. Cl…O and Cl…Cl halogen‐bond interactions are present in ( I ) and ( VI ), with distances and angles of 3.0020 (18) and 3.5159 (16) Å, and 165.56 (10) and 154.81 (11)°, respectively.     

Integration of Fe_2O_3-based photoanode and atomically dispersed cobalt cathode for efficient photoelectrochemical NH_3 synthesis

Realizing nitrogen reduction reaction(NRR) to synthesis NH_3 under mild conditions has gained extensive attention as a promising alternative way to the energy-and emission-intensive Haber-Bosch process.Among varieties of potential strategies,photoelectrochemical(PEC) NRR exhibits many advantages including utilization of solar energy,water(H_2O) as the hydrogen source and ambient operation conditions.Herein,we have designed a solar-driven PEC-NRR system integrating high-efficiency Fe_2O_3-based photoanode and atomically dispersed cobalt(Co) cathode for ambient NH_3 synthesis.Using such solar-driven PEC-NRR system,high-efficiency Fe_2O_3-based photoanode is responsible for H_2O/OH oxidatio n,and meanwhile the generated photoelectrons transfer to the single-atom Co cathode for the N_2 reduction to NH_3.As a result,this system can afford an NH_3 yield rate of 1021.5 μg mgco~(-1) h~(-1) and a faradic efficiency of 11.9% at an applied potential bias of 1.2 V(versus reversible hydrogen electrode) on photoanode in 0.2 mol/L NaOH electrolyte under simulated sunlight irradiation.     

BiVO4/ZnFe2O4同型异质结光阳极的构筑及其光电催化分解水性能

光生电子-空穴对的复合被认为是限制BiVO₄材料光电催化转换效率的重要原因之一。基于此,通过简单的水热-煅烧方法构筑了 BiVO₄/ZnFe₂O₄同型异质结光阳极,BiVO₄/ZnFe₂O₄复合光阳极在 1.23 V(vs RHE)下的光电流密度为 3.33 mA·cm^-2,较纯BiVO₄提升了2倍 (1.20 mA·cm^-2)。相关的结构及性能测试表明,BiVO₄和ZnFe₂O₄形成了带隙错开的n-n异质结,使得光生载流子得到有效分离,更有效地参与水氧化过程,进而提高了BiVO₄的光电催化水分解性能。     

Sulfonate salts of the therapeutic agent dapsone: 4‐[(4‐aminophenyl)sulfonyl]anilinium benzenesulfonate monohydrate and 4‐[(4‐aminophenyl)sulfonyl]anilinium methanesulfonate monohydrate

Dapsone, formerly used to treat leprosy, now has wider therapeutic applications. As is the case for many therapeutic agents, low aqueous solubility and high toxicity are the main problems associated with its use. Derivatization of its amino groups has been widely explored but shows no significant therapeutic improvements. Cocrystals have been prepared to understand not only its structural properties, but also its solubility and dissolution rate. Few salts of dapsone have been described. The title salts, C₁₂H₁₃N₂O₂S⁺·C₆H₅O₃S⁻·H₂O and C₁₂H₁₃N₂O₂S⁺·CH₃SO₃⁻·H₂O, crystallize as hydrates and both compounds exhibit the same space group (monoclinic, P2₁/n). The asymmetric unit of each salt consists of a 4‐[(4‐aminophenyl)sulfonyl]anilinium monocation, the corresponding sulfonate anion and a water molecule. The cation, anion and water molecule form hydrogen‐bonded networks through N—H…O=S, N—H…O_water and O_water—H…O=S hydrogen bonds. For both salts, the water molecules interact with one sulfonate anion and two anilinium cations. The benzenesulfonate salt forms a two‐dimensional network, while the hydrogen bonding within the methanesulfonate salt results in a three‐dimensional network.     

N—H...O and O—H...O hydrogen‐bonded supramolecular networks in 4‐chloroanilinium, 2‐hydroxyanilinium and 3‐hydroxyanilinium hydrogen phthalates

The title salts, 4‐chloroanilinium hydrogen phthalate (PCAHP), C₆H₇ClN⁺·C₈H₅O₄⁻, 2‐hydroxyanilinium hydrogen phthalate (2HAHP), C₆H₈NO⁺·C₈H₅O₄⁻, and 3‐hydroxyanilinium hydrogen phthalate (3HAHP), C₆H₈NO⁺·C₈H₅O₄⁻, all crystallize in the space group P2₁/c. The asymmetric unit of 2HAHP contains two independent ion pairs. The hydrogen phthalate ions of 2HAHP and 3HAHP show a short intramolecular O—H...O hydrogen bond, with O...O distances ranging from 2.3832 (15) to 2.3860 (14) Å. N—H...O and O—H...O hydrogen bonds, together with short C—H...O contacts in PCAHP and 3HAHP, generate extended hydrogen‐bond networks. PCAHP forms a two‐dimensional supramolecular sheet extending in the (100) plane, whereas 2HAHP has a supramolecular chain running parallel to the [100] direction and 3HAHP has a two‐dimensional network extending parallel to the (001) plane.