Sodium Bicyclo[1.1.1]pentanesulfinate: A Bench-Stable Precursor for Bicyclo[1.1.1]pentylsulfones and Bicyclo- [1.1.1]pentanesulfonamides

Herein, we present the synthesis of the bench-stable sodium bicyclo[1.1.1]pentanesulfinate (BCP-SO₂Na) and its application in the synthesis of bicyclo[1.1.1]pentyl (BCP) sulfones and sulfonamides. The salt can be obtained in a four-step procedure from commercially available precursors in multigram scale without the need for column chromatography or crystallization. Sulfinates are known to be useful precursors in radical and nucleophilic reactions and are widely used in medicinal chemistry. This building block enables access to BCP sulfones and sulfonamides avoiding the volatile [1.1.1]propellane which is favorable for the extension of SAR studies. Further, BCP-SO₂Na enables the synthesis of products that were not available with previous methods. A chlorination of BCP-SO₂Na and subsequent reaction with a Grignard reagent provides a new route to BCP sulfoxides. Several products were analyzed by single-crystal X-ray diffraction.     

Synthesis of All‐Carbon Disubstituted Bicyclo[1.1.1]pentanes by Iron‐Catalyzed Kumada Cross‐Coupling

1,3‐Disubstituted bicyclo[1.1.1]pentanes (BCPs) are important motifs in drug design as surrogates for p‐substituted arenes and alkynes. Access to all‐carbon disubstituted BCPs via cross‐coupling has to date been limited to use of the BCP as the organometallic component, which restricts scope due to the harsh conditions typically required for the synthesis of metallated BCPs. Here we report a general method to access 1,3‐C‐disubstituted BCPs from 1‐iodo‐bicyclo[1.1.1]pentanes (iodo‐BCPs) by direct iron‐catalyzed cross‐coupling with aryl and heteroaryl Grignard reagents. This chemistry represents the first general use of iodo‐BCPs as electrophiles in cross‐coupling, and the first Kumada coupling of tertiary iodides. Benefiting from short reaction times, mild conditions, and broad scope of the coupling partners, it enables the synthesis of a wide range of 1,3‐C‐disubstituted BCPs including various drug analogues.     

A General and Practical Route to Functionalized Bicyclo[1.1.1]Pentane-Heteroaryls Enabled by Photocatalytic Multicomponent Heteroarylation of [1.1.1]Propellane

1-Aryl-substituted bicyclo[1.1.1]pentanes (BCPs) are an important class of BCP derivatives with widespread application in drug development. Most syntheses of these materials require multiple chemical steps via BCP electrophiles or nucleophiles derived from [1.1.1]propellane. Although one-step, multicomponent radical cross-coupling reactions could provide a more sustainable and rapid route to access diverse heteroarylated BCPs, current approaches are limited to tertiary alkyl radicals, leading to a decrease in their practical value. In this study, a conceptually different approach enabled by a radical multicomponent heteroarylation of [1.1.1]propellane to access functionalized heteroarylated BCPs is described. Importantly, this protocol is compatible with primary-, secondary-, and tertiary aliphatic radicals, as well as various fluoroalkyl radical sources, thus enabling rapid library generation of sought-after BCP derivatives for drug development.     

1,3‐Difunctionalizations of [1.1.1]Propellane via 1,2‐Metallate Rearrangements of Boronate Complexes

1,3‐Disubstituted bicyclo[1.1.1]pentanes (BCPs) are valuable bioisosteres of para‐substituted aromatic rings. The most direct route to these structures is via multicomponent ring‐opening reactions of [1.1.1]propellane. However, challenges associated with these transformations mean that difunctionalized BCPs are more commonly prepared by multistep reaction sequences with BCP‐halide intermediates. Herein, we report three‐ and four‐component 1,3‐difunctionalizations of [1.1.1]propellane with organometallic reagents, organoboronic esters, and a variety of electrophiles. This process is achieved by trapping intermediate BCP‐metal species with boronic esters to form boronate complexes, which are versatile intermediates whose electrophile‐induced 1,2‐metallate rearrangement chemistry enables a broad range of C?C bond‐forming reactions.     

1,3-Difunctionalizations of [1.1.1]Propellane via 1,2-Metallate Rearrangements of Boronate Complexes

1,3-Disubstituted bicyclo[1.1.1]pentanes (BCPs) are valuable bioisosteres of para-substituted aromatic rings. The most direct route to these structures is via multicomponent ring-opening reactions of [1.1.1]propellane. However, challenges associated with these transformations mean that difunctionalized BCPs are more commonly prepared by multistep reaction sequences with BCP-halide intermediates. Herein, we report three- and four-component 1,3-difunctionalizations of [1.1.1]propellane with organometallic reagents, organoboronic esters, and a variety of electrophiles. This process is achieved by trapping intermediate BCP-metal species with boronic esters to form boronate complexes, which are versatile intermediates whose electrophile-induced 1,2-metallate rearrangement chemistry enables a broad range of C−C bond-forming reactions.     

Synthesis of All-Carbon Disubstituted Bicyclo[1.1.1]pentanes by Iron-Catalyzed Kumada Cross-Coupling

1,3-Disubstituted bicyclo[1.1.1]pentanes (BCPs) are important motifs in drug design as surrogates for p-substituted arenes and alkynes. Access to all-carbon disubstituted BCPs via cross-coupling has to date been limited to use of the BCP as the organometallic component, which restricts scope due to the harsh conditions typically required for the synthesis of metallated BCPs. Here we report a general method to access 1,3-C-disubstituted BCPs from 1-iodo-bicyclo[1.1.1]pentanes (iodo-BCPs) by direct iron-catalyzed cross-coupling with aryl and heteroaryl Grignard reagents. This chemistry represents the first general use of iodo-BCPs as electrophiles in cross-coupling, and the first Kumada coupling of tertiary iodides. Benefiting from short reaction times, mild conditions, and broad scope of the coupling partners, it enables the synthesis of a wide range of 1,3-C-disubstituted BCPs including various drug analogues.     

Silaboration of [1.1.1]Propellane: A Storable Feedstock for Bicyclo[1.1.1]pentane Derivatives

The silaboration of [1.1.1]propellane enables direct introduction of B and Si functional groups onto the bicyclo[1.1.1]pentane (BCP) scaffold in high yield under mild, additive‐free conditions. The silaborated BCP can be obtained on a gram‐scale in a single step without the need for column‐chromatographic purification, and is storable and easy to handle, providing a versatile synthetic intermediate for BCP derivatives. We also describe various conversions of the C?B/C?Si bonds on the BCP scaffold, including development of a modified Suzuki–Miyaura cross‐coupling reaction at the highly sterically hindered bridgehead sp³ carbon center of the BCP skeleton using a combination of highly activated BCP boronic esters, copper(I) oxide, and a PdCl₂(dppf) catalyst system.     

Theoretical studies on polynitrobicyclo[1.1.1]pentanes in search of novel high energy density materials

Bicyclo[1.1.1]pentane is a highly strained hydrocarbon system due to close proximity of nonbonded bridge head carbons. Based on fully optimized molecular geometries at the density functional theory using the B3LYP/6-31G* level, densities, detonation velocities, and pressures for a series of polynitrobicyclo[1.1.1]pentanes, as well as their thermal stabilities were investigated in search for high energy density materials (HEDMs). The designed compounds with more than two nitro groups are characterized by high heat of formation and magnitude correlative with the number and space distance of nitro groups. Density was calculated using the crystal packing calculations and an increase in the number of nitro groups increases the density. The increase in density shows a linear increase in the detonation characteristics. Bond dissociation energy was analyzed to determine thermal stability. Calculations of the bond length and bond dissociation energies of the C-NO₂ bond indicate that this may be the possible trigger bond in the pyrolysis mechanism. 1,2,3-Trinitrobicyclo[1.1.1]pentane (S3), 1,2,3,4-tetranitrobicyclo[1.1.1]pentane (S4), and 1,2,3,4,5-pentanitrobicyclo[1.1.1]pentane (S5) have better energetic characteristics with better stability and insensitivity, and as such may be explored in defense applications as promising candidates of the HEDMs series.     

Reactions of 2‐Aryl‐1,3‐Dithianes and [1.1.1]Propellane

Bicyclo[1.1.1]pentanes (BCPs) have sparked the interest of medicinal chemists due to their recent discovery as bioisosteres of aromatic rings. To study the biological activity of this relatively new class of bioisosteres, reliable methods to incorporate BCPs into target molecules are in high demand, as reflected by a flurry of methods for BCP synthesis in recent years. In this work, we disclose a general method for the synthesis of BCP‐containing dithianes which, upon deprotection, provide access to BCP analogues of medicinally abundant diarylketones. A broad scope of 2‐aryl‐1,3‐dithianes, including several heterocyclic derivatives, react with [1.1.1]propellane to afford 26 new derivatives in good to excellent yields. Further transformation of the dithiane portion into a variety of functional groups demonstrates the robustness of the products. A computational study indicates that the reaction of 2‐aryl‐1,3‐dithianes and [1.1.1]propellane proceeds via a two‐electron pathway.     

Scalable synthesis of 1-bicyclo[1.1.1]pentylamine via a hydrohydrazination reaction

The reaction of [1.1.1]propellane with di-tert-butyl azodicarboxylate and phenylsilane in the presence of Mn(dpm)(3) to give di-tert-butyl 1-(bicyclo[1.1.1]pentan-1-yl)hydrazine-1,2-dicarboxylate is described. Subsequent deprotection gives 1-bicyclo[1.1.1]pentylhydrazine followed by reduction to give 1-bicyclo[1.1.1]pentylamine. The reported route marks a significant improvement over the previous syntheses of 1-bicyclo[1.1.1]pentylamine in terms of scalability, yield, safety, and cost.     

Synthesis of bisbicyclo[1.1.1]pentyldiazene. The smallest bridgehead diazene

Bisbicyclo[1.1.1]pentyldiazene, the smallest bicyclic azo compound, has been synthesized from the precursor [1.1.1]propellane via synthesis of N,N'-bis(bicyclo[1.1.1]pentyl)sulfamide and azoxybicyclo[1.1.1]pentane. The UV absorption of this diazene at 382 nm indicates that the compound is the trans isomer. Conversion to the cis isomer by irradiation was not possible because of attainment of a photostationary state. However, on the basis of the photochemical studies, the absorption of the cis-[1.1.1] isomer is estimated to be 384 nm.     

Strain-release 2-azaallyl anion addition/borylation of [1.1.1]propellane: synthesis and functionalization of benzylamine bicyclo[1.1.1]pentyl boronates

We report a 3-component reaction between N-benzyl ketimines, [1.1.1]propellane, and pinacol boronates to generate benzylamine bicyclo[1.1.1]pentane (BCP) pinacol boronates. These structures are analogous to highly sought diarylmethanamine cores, which are common motifs in bioactive molecules. We demonstrate the versatility of the boronate ester handle via downstream functionalization through a variety of reactions, including a challenging Pd-catalyzed (hetero)arylation that exhibits a broad substrate scope. Together, these methods enable the synthesis of high-value BCP benzylamines which are inaccessible by existing methods. Furthermore, we demonstrate the successful application of these newly developed (hetero)arylation conditions to a variety of challenging tertiary pinacol boronates, including nitrogen-containing heterocycles, 1,1-disubstituted cyclopropanes, and other BCP cores.

We report a 3-component reaction between N-benzyl ketimines, [1.1.1]propellane, and pinacol boronates to generate benzylamine bicyclo[1.1.1]pentane (BCP) pinacol boronates.     

Formation of a 1-bicyclo[1.1.1]pentyl anion and an experimental determination of the acidity and C-H bond dissociation energy of 3-tert-butylbicyclo[1.1.1]pentane

Decarboxylation of 1-bicyclo[1.1.1]pentanecarboxylate anion does not afford 1-bicyclo[1.1.1]pentyl anion as previously assumed. Instead, a ring-opening isomerization which ultimately leads to 1,4-pentadien-2-yl anion takes place. A 1-bicyclo[1.1.1]pentyl anion was prepared nevertheless via the fluoride-induced desilylation of 1-tert-butyl-3-(trimethylsilyl)bicyclo[1.1.1]pentane. The electron affinity of 3-tert-butyl-1-bicyclo[1.1.1]pentyl radical (14.8 plus minus 3.2 kcal/mol) was measured by bracketing, and the acidity of 1-tert-butylbicyclo[1.1.1]pentane (408.5 +/- 0.9) was determined by the DePuy kinetic method. These values are well-reproduced by G2 and G3 calculations and can be combined in a thermodynamic cycle to provide a bridgehead C-H bond dissociation energy (BDE) of 109.7 +/- 3.3 kcal/mol for 1-tert-butylbicyclo[1.1.1]pentane. This bond energy is the strongest tertiary C-H bond to be measured, is much larger than the corresponding bond in isobutane (96.5 +/- 0.4 kcal/mol), and is more typical of an alkene or aromatic compound. The large BDE can be explained in terms of hybridization.     

9,9-Dimethyl-8,10-dioxapentacyclo[5.3.0.0.0.0]decane and naphthotetracyclo[5.1.0.0.0]oct-3-ene: new substituted [1.1.1]propellanes as precursors to 1,2,3,4-tetrafunctionalized bicyclo[1.1.1]pentanes

Two new substituted [1.1.1]propellanes have been generated from the corresponding bicyclo[1.1.0]butanes in either single-step (1a) or four-step procedures (1b). The observed degree of double lithiation of the bicyclo[1.1.0]butanes is discussed in the context of DFT computational results. Addition reactions across the central C(1)-C(3) bonds of the propellanes were studied. Only the propellane 1b gave the biacetyl addition product.     

Partially bridge-fluorinated dimethyl bicyclo[1.1.1]pentane-1,3-dicarboxylates: preparation and NMR spectra

Direct fluorination of dimethyl bicyclo[1.1.1]pentane-1,3-dicarboxylate, obtained from [1.1.1]propellane prepared by an improved synthetic procedure, furnished esters of 14 of the 15 possible bridge-fluorinated bicyclo[1.1.1]pentane-1,3-dicarboxylic acids, isolated by preparative GC. Calculated geometries reflect the substitution pattern in a regular fashion compatible with Bent's rules. Considerable additional strain is introduced into the bicyclo[1.1.1]pentane cage by polyfluorination; it is calculated to be as high as 33-35 kcal/mol for hexasubstitution. Three arrangements of the fluorine substituents are especially strain-rich: geminal, proximate, and W-related. The (1)H, (13)C, and (19)F NMR spectra exhibit a striking variety of chemical shifts and long-range coupling constants. These are in good agreement with results calculated with neglect of the bridgehead substituents for all of the chemical shifts by the GIAO-RHF/6-31G//RHF/6-31G and GIAO-RHF/6-31G//MP2/6-31G methods and for many of the coupling constants by the EOM-CCSD/6-311G//MP2/6-311G method. The proximate (4)J(FF) constants are particularly large (50-100 Hz) and show an inverse linear dependence on the calculated F-F distance in the range 2.43-2.58 A.     

Recent advances in the applications of [1.1.1]propellane in organic synthesis

As a highly strained small molecule, [1.1.1]propellane has been widely used in various synthetic transformations owing to the exceptional reactivity of the central bond between the two bridgehead carbons. Utilizing strain-release approaches, the rapid development of strategies for the construction of bicyclo[1.1.1]pentane (BCP) and cyclobutane derivatives using [1.1.1]propellane as the starting material has been witnessed in the past few years. In this review, we highlight the most recent advances in this field. Accordingly, the reactivity of [1.1.1]propellane can be divided into three pathways, including radical, anionic and transition metal-catalyzed pathways under appropriate conditions.     

Synthesis of 1,3-disubstituted bicyclo[1.1.0]butanes via directed bridgehead functionalization

Bicyclo[1.1.0]butanes (BCBs) are increasingly valued as intermediates in ‘strain release’ chemistry for the synthesis of substituted four membered rings and bicyclo[1.1.1]pentanes, with applications including bioconjugation processes. Variation of the BCB bridgehead substituents can be challenging due to the inherent strain of the bicyclic scaffold, often necessitating linear syntheses of specific BCB targets. Here we report the first palladium catalyzed cross-coupling on pre-formed BCBs which enables a ‘late stage’ diversification of the bridgehead position, and the conversion of the resultant products into a range of useful small ring building blocks.

Bicyclo[1.1.0]butanes (BCBs) are valuable precursors to four-membered rings and bicyclo[1.1.1]pentanes, and useful bioconjugation agents. We describe a versatile approach to access 1,3-disubstituted BCBs, which are otherwise challenging to prepare.     

Rationalizing the diverse reactivity of [1.1.1]propellane through σ–π-delocalization

[1.1.1]Propellane is the ubiquitous precursor to bicyclo[1.1.1]pentanes (BCPs), motifs of high value in pharmaceutical and materials research. The classical Lewis representation of this molecule places an inter-bridgehead C–C bond along its central axis; ‘strain relief’-driven cleavage of this bond is commonly thought to enable reactions with nucleophiles, radicals and electrophiles. We propose that this broad reactivity profile instead derives from σ–π-delocalization of electron density in [1.1.1]propellane. Using ab initio and DFT calculations, we show that its reactions with anions and radicals are facilitated by increased delocalization of electron density over the propellane cage during addition, while reactions with cations involve charge transfer that relieves repulsion inside the cage. These results provide a unified framework to rationalize experimental observations of propellane reactivity, opening up opportunities for the exploration of new chemistry of [1.1.1]propellane and related strained systems that are useful building blocks in organic synthesis.

A unified framework that explains the reactivity of [1.1.1]propellane through electron delocalization.     

Recent advances in the applications of [1.1.1]propellane in organic synthesis

As a highly strained small molecule, [1.1.1]propellane has been widely used in various synthetic transformations owing to the exceptional reactivity of the central bond between the two bridgehead carbons. Utilizing strain-release approaches, the rapid development of strategies for the construction of bicyclo[1.1.1]pentane (BCP) and cyclobutane derivatives using [1.1.1]propellane as the starting material has been witnessed in the past few years. In this review, we highlight the most recent advances in this field. Accordingly, the reactivity of [1.1.1]propellane can be divided into three pathways, including radical, anionic and transition metal-catalyzed pathways under appropriate conditions.     

Bicyclo[1.1.1]pentane Embedded in Porphyrinoids**

We report a two-step approach to obtain synthetically versatile bicyclo[1.1.1]pentane (BCP) derivatives using Grignard reagents. This method allows the incorporation of BCP units in tetrapyrrolic macrocycles and the synthesis of a new class of calix[4]pyrrole analogues by replacing two bridging methylene groups with two BCP units. In addition, a doubly N-confused system was also formed in the presence of electron-withdrawing substituents at the BCP bridgeheads. The pyrrole rings in BCP containing macrocycles exist in 1,3-alternate or αβαβ conformations, as observed from single-crystal X-ray diffraction analyses and 2D NMR spectroscopy.