Green synthesis of reduced graphene oxide/Fe3O4/Ag ternary nanohybrid and its application as magnetically recoverable catalyst in the reduction of 4‐nitrophenol

Materials having both magnetic and catalytic properties have shown great potential for practical applications. Here, a reduced graphene oxide/iron oxide/silver nanohybrid (rGO/Fe₃O₄/Ag NH) ternary material was prepared by green synthesis of Ag on pre‐synthesized rGO/Fe₃O₄. The as‐prepared rGO/Fe₃O₄/Ag NH was characterized using Fourier transform infrared spectroscopy, X‐ray diffractometry, Raman spectroscopy, vibrating sample magnetometry, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. rGO sheets were covered with Fe₃O₄ (8–16 nm) and Ag (18–40 nm) nanoparticles at high densities. The mass percentages were 13.47% (rGO), 62.52% (Fe₃O₄) and 24.01% (Ag). rGO/Fe₃O₄/Ag NH exhibited superparamagnetic behavior with high saturated magnetization (29 emu g⁻¹ at 12 kOe), and efficiently catalyzed the reduction of 4‐nitrophenol (4‐NP) with a rate constant of 0.37 min⁻¹, comparable to those of Ag‐based nanocatalysts. The half‐life of 4‐NP in the presence of rGO/Fe₃O₄/Ag NH was ca 1.86 min. rGO/Fe₃O₄/Ag NH could be magnetically collected and reused, and retained a high conversion efficiency of 94.4% after the fourth cycle. rGO/Fe₃O₄/Ag NH could potentially be used as a magnetically recoverable catalyst in the reduction of 4‐NP and environmental remediation.     

Preparation,characterization and catalytic application of PdPt bimetallic nanoparticles stabilized by 15‐membered triolefinic macrocycle‐terminated poly(propylene imine) dendrimer

PdPt bimetallic nanoparticles stabilized by 15‐membered triolefinic macrocycle‐stabilized poly(propylene imine) dendrimer (G3‐M(Pd_x Pt_10−x ) DSNs) have been prepared via synthesis of a 15‐membered triolefinic macrocycle‐modified third‐generation poly(propylene imine) dendrimer (G3‐M) and then synchronous ligand exchange with Pd(PPh₃)₄/Pt(PPh₃)₄ complexes. The structure and catalytic activity of the DSNs were characterized using Fourier transform infrared, ¹H NMR, transmission electron microscopy, energy‐dispersive X‐ray and X‐ray photoelectron analyses. As a novel catalyst system, it can be concluded that the composition of the bimetallic nanoparticles has an influence on the catalytic activity of the hydrogenation reaction of acrylonitrile–butadiene rubber, which can be related to synergistic effect. Furthermore, the selectivity and recyclability of G3‐M(Pd_x Pt_10−x ) DSN catalyst are also discussed.     

A 2D cadmium metal–organic framework: Synthesis,structure and luminescence sensing for chromate,permanganate, cupric,silver and ferric

A multi-responsive Cd metal–organic framework {[Cd (ttpe)(H₂O)(ip)]•4H₂O•DMAC}_n ( 1•4H ₂ O•DMAC ) was synthesized using hydrothermal method (ttpe = 1,1,2,2-tetra(4-(1H-1,2,4-triazol-1-yl)phenyl)ethylene, ip = isophthalate, DMAC = N,N-dimethylacetamide), and characterized. 1 exhibits a 2D (4,4) network. The luminescent sensing experimrnts showed that 1•4H ₂ O•DMAC as a new MOF luminescent sensor can detect Cr₂O₇²⁻, CrO₄²⁻, MnO₄⁻, Cu²⁺, Ag⁺ and Fe³⁺ in aqueous solution with simultaneously high efficiency and high sensitivity. The quenching constants K_sv for Cr₂O₇²⁻, CrO₄²⁻, MnO₄⁻, Cu²⁺, Ag⁺ and Fe³⁺ are 4.231 × 10⁴ M⁻¹, 2.471 × 10⁴ M⁻¹, 6.459 × 10³ M⁻¹, 7.617 × 10³ M⁻¹, 1.563 × 10⁴ M⁻¹ and 3.574 × 10⁴ M⁻¹, respectively. The detection limits are 0.094 μM for Cr₂O₇²⁻, 0.108 μM for CrO₄^{2 −} , 0.346 μM for MnO₄⁻, 0.302 μM for Cu²⁺, 0.221 μM for Ag ⁺ , and 0.100 μM for Fe³⁺. 1•4H ₂ O•DMAC exhibits high photocatalytic efficiency for degradation of methylene blue under visible light irradiation.     

Decoration of Fe3O4 nanoparticles on the surface of poly(acrylic acid) functionalized multi‐walled carbon nanotubes by covalent bonding

Fe₃O₄ nanoparticles were indirectly implanted onto functionalized multi‐walled carbon nanotubes (MWCNTs) leading to a nanocomposite with stronger magnetic performance. Poly(acrylic acid) (PAA) oligomer was first reacted with hydroxyl‐functionalized MWCNTs (MWCNTs‐OH) forming PAA‐grafted MWCNTs (PAA‐g‐MWCNTs). Subsequently, Fe₃O₄ nanoparticles were attached onto the surface of PAA‐g‐MWCNTs through an amidation reaction between the amino groups on the surface of Fe₃O₄ nanoparticles and the carboxyl groups of PAA. Fourier transform infrared spectra confirmed that the Fe₃O₄ nanoparticles and PAA‐g‐MWCNTs were indeed chemically linked. The morphology of the nanocomposites was characterized using transmission electron microscope (TEM). The surface and bulk structure of the nanocomposites were examined using X‐ray diffraction, X‐ray photoelectron spectrometer (XPS), and thermogravimetric analysis (TGA). The magnetic performance was characterized by vibrating sample magnetometer (VSM) and the magnetic saturation value of the magnetic nanocomposites was 47 emu g^?1. The resulting products could be separated from deionized water under an external magnetic field within about 15 s. Finally, the magnetorheological (MR) performances of the synthesized magnetic nanocomposites and pure Fe₃O₄ nanoparticles were examined using a rotational rheometer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Highly stable magnetically separable copper nanocatalyst as an efficient catalyst for C(sp2)–C(sp) and C(sp2)–C(sp2) cross‐coupling reactions

A copper catalyst has been explored as an efficient and recyclable catalyst to effect Sonogashira and Suzuki cross‐coupling reactions. After modification of 2‐(((piperazin‐1‐ylmethyl)imino)methyl)phenol (PP) on the surface of amorphous silica‐coated iron oxide (Fe₃O₄@SiO₂@Cl) magnetic core–shell nanocomposite, copper(II) chloride was employed to synthesize the Fe₃O₄@SiO₂@PP‐Cu catalyst, affording a copper loading of 1.52 mmol g⁻¹. High yield, low reaction times, non‐toxicity and recyclability of the catalyst are the main merits of this protocol. The catalyst was characterized using Fourier transform infrared, X‐ray photoelectron, energy‐dispersive X‐ray and inductively coupled plasma optical emission spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, and vibrating sample magnetometry.     

Synthesis and characterization of Ni (II), Cu (II), Fe (II) and Fe3O4 nanoparticle complexes with tetraaza macrocyclic Schiff base ligand for antimicrobial activity and cytotoxic activity against cancer and normal cells

This work describes a simple synthesis of complexes of the type [M(C₃₂H₂₈N₄)Cl₂], where M = Ni (II), Cu (II) and Fe (II) and a novel complex of magnetite nanoparticle (Fe₃O₄NP) inside (INS) tetraaza macrocyclic Schiff base ligand (C₃₂H₂₈N₄): [Fe₃O₄NP‐INS‐(C₃₂H₂₈N₄)], which was prepared by using a novel co‐precipitation method of coordinated ferric ion (Fe³⁺) in the complex [Fe(C₃₂H₂₈N₄)Cl₂] under mild conditions. The synthesized compounds were characterized and compared with a various physic‐chemical techniques like: Fourier transform infrared (FT‐IR), ultraviolet–visible spectroscopic techniques (UV–Vis), 1‐dimensional (1D) ¹H‐NMR, ¹³C‐NMR spectroscopic techniques, mass spectra, Powder X‐ray diffraction (PXRD), Vibrating sample magnetometer (VSM), Scanning electron microscopy (SEM), elemental analysis and molar conductance measurements. Furthermore, the highest saturation magnetization was 26.56 emu.g^?1 obtained from [Fe₃O₄NP‐INS‐(C₃₂H₂₈N₄)] (diameter of Fe₃O₄NPs~20.87 nm) that prove easy separation by an external magnetic field. In vitro screening of all the compounds against different species of bacteria and fungi shows that [Fe₃O₄NP‐INS‐(C₃₂H₂₈N₄)] is effective against the tested strains as compared to the tetraaza macrocyclic ligand and selected complexes. The cytotoxic activity of the all compounds was also examined in 3 human tumor cell lines as U87, MDA‐MB‐231 and LS‐174. The complex [Fe₃O₄NP‐INS‐(C₃₂H₂₈N₄)] shows moderate and strong cytotoxic activity against brain cancer, colon cancer and breast cancer (U87, MDA‐MB‐231 and LS‐174 respectively), without showing cytotoxicity towards peripheral blood mononucleocyte (PBMC) cells.     

Catalytic promiscuity of an iron(II)–phenanthroline complex

A mononuclear iron(II) complex, [Fe(phen)₃]Cl₂ ( 1 ) (phen =1,10‐phenanthroline), has been synthesized in crystalline phase and characterized using various spectroscopic techniques including single crystal X‐ray diffraction. Crystal structure analysis revealed that 1 crystallizes in a monoclinic system with C2/m space group. Complex 1 acts as a functional model for a biomimetic catalyst promoting the aerobic oxidation of 3,5‐di‐tert ‐butylcatechol (3,5‐DTBC) through radical pathways with a significant turnover number (k _cat =3.55 × 10³ h⁻¹) and exhibits catechol dioxygenase activity towards the same 3,5‐DTBC substrate at room temperature in oxygen‐saturated ethanol medium. The existence of an isobestic point at 610 nm from spectrophotometric data indicates the presence of Fe³⁺ −3,5‐DTBC adduct favouring an enzyme–substrate binding phenomenon. Upon stoichiometric addition of 3,5‐DTBC pretreated with two equivalents of triethylamine to the iron complex, two catecholate‐to‐iron(III) ligand‐to‐metal charge transfer bands (575 and 721 nm) are observed and the in situ generated catecholate intermediate reacts with dioxygen (k _obs =9.89 × 10⁻⁴ min⁻¹) in ethanol medium to afford exclusively intradiol cleavage products along with a small amount of benzoquinone, and a small amount of extradiol cleavage products, which provide substantial evidence for a substrate activation mechanism. Copyright © 2016 John Wiley & Sons, Ltd.     

General Preparation of Heme Protein Functional Fe3O4@Au‐Nps Magnetic Nanocomposite for Sensitive Detection of Hydrogen Peroxide

Stable magnetic nanocomposite of gold nanoparticles (Au‐NPs) decorating Fe₃O₄ core was successfully synthesized by the linker of Boc‐L‐cysteine. Transmission electron microscope (TEM), energy dispersive X‐ray spectroscopy (EDX) and cyclic voltammograms (CV) were performed to characterize the as‐prepared Fe₃O₄@Au‐Nps. The results indicated that Au‐Nps dispersed homogeneously around Fe₃O₄ with the ratio of Au to Fe₃O₄ nanoparticles as 5–10/1 and the apparent electrochemical area as 0.121 cm². After self‐assembly of hemoglobin (Hb) on Fe₃O₄@Au‐Nps by electrostatic interaction, a hydrogen peroxide biosensor was developed. The Fe₃O₄@Au‐Nps/Hb modified GCE exhibited fast direct electron transfer between heme center and electrode surface with the heterogeneous electron transfer rate constant (Ks ) of 3.35 s⁻¹. Importantly, it showed excellent electrocatalytic activity towards hydrogen peroxide reduction with low detection limit of 0.133 μM (S /D =3) and high sensitivity of 0.163 μA μM⁻¹, respectively. At the concentration evaluated, the interfering species of glucose, dopamine, uric acid and ascorbic acid did not affect the determination of hydrogen peroxide. These results demonstrated that the introduction of Au‐Nps on Fe₃O₄ not only stabilized the immobilized enzyme but also provided large surface area, fast electron transfer and excellent biocompatibility. This facile nanoassembly protocol can be extended to immobilize various enzymes, proteins and biomolecules to develop robust biosensors.     

Preparation of bio‐based keratin‐derived magnetic molecularly imprinted polymer nanoparticles for the facile and selective separation of bisphenol A from water

In this study, new bio‐based magnetic molecularly imprinted polymer nanoparticles (∼23 nm) were synthesized from keratin extracted from chicken feathers and methacrylate‐functionalized Fe₃O₄ nanoparticles for its potential application in separation and removal of bisphenol A from water. The prepared magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, field‐emission scanning electron microscopy, thermogravimetric analysis, alternative gradient field magnetometry, and energy‐dispersive X‐ray spectroscopy. The sorption of bisphenol A was investigated by changing the influencing factors such as pH, immersion time, Fe₃O₄ nanoparticles dosage, and the initial concentration of bisphenol A. Results illustrated that sorption was very fast and efficient (Q_m = 600 mg/g) having a removal efficiency of ∼98% in 40 min of immersion. The adsorption process showed better conformity with the Weber−Morris kinetics and the Freundlich isotherm model. The selectivity of bisphenol A by adsorbent was checked in the presence of hydroquinone, phenol, tetrabromobisphenol, and 4,4′‐biphenol as interferences.     

FeIII in a low‐spin state in caesium bis[3‐ethoxysalicylaldehyde 4‐methylthiosemicarbazonato(2–)‐κ3O2,N1,S]ferrate(III) methanol monosolvate

The synthesis and crystal structure (at 100 K) of the title compound, Cs[Fe(C₁₁H₁₃N₃O₂S₂)₂]·CH₃OH, is reported. The asymmetric unit consists of an octahedral [Fe^III(L)₂]⁻ fragment, where L²⁻ is 3‐ethoxysalicylaldehyde 4‐methylthiosemicarbazonate(2−) {systematic name: [2‐(3‐ethoxy‐2‐oxidobenzylidene)hydrazin‐1‐ylidene](methylamino)methanethiolate}, a caesium cation and a methanol solvent molecule. Each L²⁻ ligand binds through the thiolate S, the imine N and the phenolate O atoms as donors, resulting in an Fe^IIIS₂N₂O₂ chromophore. The O,N,S‐coordinating ligands are orientated in two perpendicular planes, with the O and S atoms in cis positions and the N atoms in trans positions. The Fe^III cation is in the low‐spin state at 100 K.     

Triangle Cl−Ag1−Cl Sites for Superior Photocatalytic Molecular Oxygen Activation and NO Oxidation of BiOCl

BiOCl photocatalysis shows great promise for molecular oxygen activation and NO oxidation, but its selective transformation of NO to immobilized nitrate without toxic NO₂ emission is still a great challenge, because of uncontrollable reaction intermediates and pathways. In this study, we demonstrate that the introduction of triangle Cl−Ag₁−Cl sites on a Cl-terminated, (001) facet-exposed BiOCl can selectively promote one-electron activation of reactant molecular oxygen to intermediate superoxide radicals (⋅O₂⁻), and also shift the adsorption configuration of product NO₃⁻ from the weak monodentate binding mode to a strong bidentate mode to avoid unfavorable photolysis. By simultaneously tuning intermediates and products, the Cl−Ag₁−Cl-landen BiOCl achieved >90 % NO conversion to favorable NO₃⁻ of high selectivity (>97 %) in 10 min under visible light, with the undesired NO₂ concentration below 20 ppb. Both the activity and the selectivity of Cl−Ag₁−Cl sites surpass those of BiOCl surface sites (38 % NO conversion, 67 % NO₃⁻ selectivity) or control O−Ag₁−O sites on a benchmark photocatalyst P25 (67 % NO conversion and 87 % NO₃⁻ selectivity). This study develops new single-atom sites for the performance enhancement of semiconductor photocatalysts, and also provides a facile pathway to manipulate the reactive oxygen species production for efficient pollutant removal.     

Facile Synthesis of Graphene/Cobalt Oxide Nanohexagons for the Selective Detection of Dopamine

This work presents a simple green approach for the chemical synthesis of cobalt oxide nano hexagons (Co₃O₄ NHs) with an average size of 160±40 nm incorporated graphene nanosheets (GR). The techniques used to confirm the formation of GR−Co₃O₄ NHs are transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), and X‐ray diffraction spectroscopy (XRD). The dopamine (DA) sensor was fabricated by drop casting GR−Co₃O₄ NHs on the pre‐cleaned glassy carbon electrode (GCE). GR−Co₃O₄ modified GCE displayed a sensitive and selective electrochemical determination of DA compared to only GR and Co₃O₄ NHs modified GCE. Our fabricated sensor showed a wide linear range from 0.2 to 3443 μM with low limit of detection (84 nM) towards the determination of DA. The sensitivity of our fabricated sensor was calculated to be 108 μA mM⁻¹ cm⁻². As well, a significant storage stability, repeatability and reproducibility were attained by GR−Co₃O₄ NHs modified GCE. Human urine samples were targeted for the demonstration of practicality of our sensor.     

Synthesis of gold/polydopamine composite surfaces on glass substrates for localized surface plasmon resonance and catalysis

Composite materials of polydopamine (PDA) and gold nanoparticles on glass substrates (Au/PDA@slide) were obtained via a simple chemical process. First, PDA films (PDA@slide) were formed by immersing slides in 20 mg ml⁻¹ dopamine aqueous solution at pH = 8.5 for 1 h. Then, PDA@slide was dipped in 0.02 M chloroauric acid (HAuCl₄) aqueous solution for a certain time, Au/PDA@slide being formed. Gold nanoparticles were obtained by the reductive properties of PDA. The morphology and chemical composition of the composite material were characterized using scanning electron microscopy, X‐ray diffraction and X‐ray photoelectron spectroscopy. The catalytic properties of Au/PDA@slide were evaluated using the reduction of 4‐nitrophenol (4‐NP) in the presence of sodium borohydride (NaBH₄) aqueous solution at room temperature. The catalytic activity of the optimal Au/PDA@slide was so satisfactory that the reduction of 4‐NP was completed within 10 min. Moreover, the Au/PDA@slide composite material was stable up to five cycles without significant loss of its catalytic activity. In addition, Au/PDA@slide also exhibited photocatalytic ability, photodegrading 2.5 ml of 17.5 mg l⁻¹ methyl orange in 100 min. By measuring the UV–visible absorption bands of Au/PDA@slide, it was proved that the condition of the strongest surface plasmon resonance of Au/PDA@slide was the optimal condition for catalytic reduction of 4‐NP.     

Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

99Tc NMR determination of the oxygen isotope content in 18O‐enriched water

⁹⁹Tc NMR has been suggested as an original method of evaluating the content of oxygen isotopes in oxygen‐18‐enriched water, a precursor for the production of radioisotope fluorine‐18 used in positron emission tomography. To this end, solutions of NH₄TcO₄ or NaTcO₄ (up to 0.28 mol/L) with natural abundance of oxygen isotopes in virgin or recycled ¹⁸O‐enriched water have been studied by ⁹⁹Tc NMR. The method is based on ¹⁶O/¹⁷O/¹⁸O intrinsic isotope effects in the ⁹⁹Tc NMR chemical shifts, and the statistical distribution of oxygen isotopes in the coordination sphere of TcO₄⁻ and makes it possible to quantify the composition of enriched water by measuring the relative intensities of the ⁹⁹Tc NMR signals of the Tc¹⁶O_4−n¹⁸O_n⁻ isotopologues. Because the oxygen exchange between TcO₄⁻ and enriched water in neutral and alkaline solutions is characterized by slow kinetics, gaseous HCl was bubbled through a solution for a few seconds to achieve the equilibrium distribution of oxygen isotopes in the Tc coordination sphere without distortion of the oxygen composition of the water. Pertechnetate ion was selected as a probe due to its high stability in solutions and the significant ⁹⁹Tc NMR shift induced by a single ¹⁶O→¹⁸O substitution (−0.43 ± 0.01 ppm) in TcO₄⁻ and spin coupling constant ¹J(⁹⁹Tc–¹⁷O) (131.46 Hz) favourable for the observation of individual signals of Tc¹⁶O_4−n¹⁸O_n⁻ isotopologues.     

Adsorption of cinnabarinic acid from culture fluid with magnetic microbeads

In this study, antimicrobial pigment cinnabarinic acid (CA) was produced from Pycnoporus cinnabarinus in laboratory‐scale batch cultures. Magnetic poly(ethylene glycol dimethacrylate‐N‐methacryloyl‐l‐tryptophan methyl ester) [m‐poly(EGDMA‐MATrp)] beads (average diameter = 53–103 µm) were synthesized by copolymerizing of N‐methacryloyl‐l‐tryptophan methyl ester (MATrp) with ethylene glycol dimethacrylate (EGDMA) in the presence of magnetite (Fe₃O₄) and used for the adsorption of CA. The m‐poly(EGDMA‐MATrp) beads were characterized by N₂ adsorption/desorption isotherms (Brunauer Emmet Teller), X‐ray photoelecron spectroscopy, scanning electron microscopy, infrared spectroscopy, thermal gravimetric analysis, electron spin resonance and swelling studies. The efficiency of m‐poly(EGDMA‐MATrp) beads for separation of CA from culture fluid was evaluated. The effects of pH, initial concentration, contact time and temperature on adsorption were analyzed. The maximum CA adsorption capacity of the m‐poly(EGDMA‐MATrp) beads was 272.9 mg g⁻¹ at pH 7.0, 25 °C. All the isotherm data can be fitted with the Langmuir, Freundlich and Dubinin–Radushkevich isotherm models. The adsorption process obeyed pseudo‐second‐order kinetic model. Thermodynamic parameters ΔH = 5.056 kJ mol⁻¹, ΔS = 52.44 J K⁻¹ mol⁻¹ and ΔG = −9.424 kJ mol−¹ to ‐11.27 kJ mol−¹ with the rise in temperature from 4 to 40 °C indicated that the adsorption process was endothermic and spontaneous. Copyright © 2015 John Wiley & Sons, Ltd.     

Idiosyncratic Ag7Pt2O7: An Electron Imprecise yet Diamagnetic Small Band Gap Oxide

The seminal qualitative concepts of chemical bonding, as presented by Walter Kossel and Gilbert Newton Lewis back in 1916, have lasting general validity. These basic rules of chemical valence still serve as a touchstone for validating the plausibility of composition and constitution of a given chemical compound. We report on Ag₇Pt₂O₇, with a composition that violates the basic rules of chemical valence and an exotic crystal structure. The first coordination sphere of platinum is characteristic of tetravalent platinum. Thus, the electron count corresponds to Ag₇Pt₂O₇*e⁻, where excess electrons are associated with the silver substructure. Such conditions given, it is commonly assumed that the excess electrons are either itinerant or localized in Ag−Ag bonds. However, the material does not show metallic conductivity, nor does the structure feature Ag-Ag pairs. Instead, the excess electrons organize themselves in 2e−4c bonds within the silver substructure. This subvalent silver oxide reveals a new general facet pertinent to silver chemistry.     

Kinetics of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione with β‐pinene and 2‐carene: Temperature,high pressure,and solvent effects

The data on temperature, solvent, and high hydrostatic pressure influence on the rate of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione ( 1 ) with 2‐carene ( 2 ), and β‐pinene ( 4 ) have been obtained. Ene reactions 1 + 2 and 1 + 4 have high heat effects: ∆H_r‐n ( 1 + 2 ) −158.4, ∆H_r‐n( 1 + 4 ) −159.2 kJ mol⁻¹, 25°C, 1,2‐dichloroethane. The comparison of the activation volume (∆V^≠( 1 + 2 ) −29.9 cm³ mol⁻¹, toluene; ∆V^≠( 1 + 4 ) −36.0 cm³ mol⁻¹, ethyl acetate) and reaction volume values (∆V_r‐n( 1 + 2 ) −24.0 cm³ mol⁻¹, toluene; ∆V_r‐n( 1 + 4 ) −30.4 cm³ mol⁻¹, ethyl acetate) reveals more compact cyclic transition states in comparison with the acyclic reaction products 3 and 5 . In the series of nine solvents, the reaction rate of 1+2 increases 260‐fold and 1+4 increases 200‐fold, respectively, but not due to the solvent polarity.     

Fabrication and photoluminescence properties of Ag0 and Ag0–Er3+ containing plasmonic glass nanocomposites in the K2O–ZnO–SiO2 system

Here, we report the preparation of nano silver (Ag) and nano Ag-erbium (Ag–Er) co-embedded potassium–zinc-silicate based monolithic glass nanocomposites by a controlled heat-treatment process of precursor glasses. The nanocomposites were characterized by differential scanning calorimeter, dilatometer, UV–Visible absorption spectrophotometer, X-ray diffractometer and transmission electron microscope and spectroflurimeter. A strong surface plasmon resonance (SPR) band is observed around 430 nm in all the heat-treated glass nanocomposite samples due to the formation of Ag⁰ nanoparticles (NP). The Ag-glass nanocomposite samples display nearly 2-fold enhanced photoluminescence (PL) at 470 nm upon excitation at 290 nm until the size of the NP increases to the value equals to the mean free path of conduction electrons inside the particles. On contrary to this, the photoluminescence spectra of Er³⁺ ions exhibit a gradual decrease of NIR emission at 1540 nm due to ⁴I_13/2 → ⁴I_15/2 transition under excitation at 523 nm in the heat-treated glass nanocomposites which happened due to excitation energy transfer of Er³⁺ ions to the Ag NP, acting as ‘plasmonics diluents’ for Er³⁺ ions. These nanocomposites have huge potential for various nanophotonic applications.     

Magnetic graphene oxide modified with choline chloride-based deep eutectic solvent for the solid-phase extraction of protein

Four kinds of green deep eutectic solvents (DESs) based on choline chloride (ChCl) have been synthesized and coated on the surface of magnetic graphene oxide (Fe₃O₄@GO) to form Fe₃O₄@GO-DES for the magnetic solid-phase extraction of protein. X-ray diffraction (XRD), vibrating sample magnetometer (VSM), Fourier transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FESEM) and thermal gravimetric analysis (TGA) were employed to characterize Fe₃O₄@GO-DES, and the results indicated the successful preparation of Fe₃O₄@GO-DES. The UV–vis spectrophotometer was used to measure the concentration of protein after extraction. Single factor experiments proved that the extraction amount was influenced by the types of DESs, solution temperature, solution ionic strength, extraction time, protein concentration and the amount of Fe₃O₄@GO-DES. Comparison of Fe₃O₄@GO and Fe₃O₄@GO-DES was carried out by extracting bovine serum albumin, ovalbumin, bovine hemoglobin and lysozyme. The experimental results showed that the proposed Fe₃O₄@GO-DES performs better than Fe₃O₄@GO in the extraction of acidic protein. Desorption of protein was carried out by eluting the solid extractant with 0.005 mol L⁻¹ Na₂HPO₄ contained 1 mol L⁻¹ NaCl. The obtained elution efficiency was about 90.9%. Attributed to the convenient magnetic separation, the solid extractant could be easily recycled.