The thermal decomposition of N,N-dimethyl-3-oxaglutaramic acid and the kinetics of its second-stage thermal decomposition reaction

N,N-dimethyl-3-oxa-glutaramic acid was purified and characterized by ¹H-NMR, Fourier transform infrared spectroscopy (FT-IR) and elemental analysis. The thermal decomposition of the title compound was studied by means of thermogravimetry differential thermogravimetry (TG-DTG) and FT-IR. The kinetic parameters of its second-stage decomposition reaction were calculated and the decomposition mechanism was discussed. The kinetic model function in a differential form, apparent activation energy and pre-exponential constant of the reaction are 3/2 [(1?α)^1/3?1]^?1, 203.75 kJ·mol^?1 and 10^17.95s^?1, respectively. The values of ΔS ^≠, ΔH ^≠ and ΔG ^≠ of the reaction are 94.28 J·mol^?1·K^?1, 203.75 kJ·mol^?1 and 155.75 kJ·mol^?1, respectively.     

Study on thermal decomposition kinetics of N,N′-bis(5,5-dimethyl-2-phospha-2-thio-1,3-dioxan-2-yl)ethylenediamine in air

The thermal decomposition kinetics of the N,N′-bis(5,5-dimethyl-2-phospha-2-thio-1,3-dioxan-2-yl) ethylenediamine (DPTDEDA) in air were studied by TGDTG techniques. The kinetic parameters of the decomposition process for the title compound in the two main thermal decomposition steps were calculated through the Friedman and Flynn-Wall-Ozawsa (FWO) methods and the thermal decomposition mechanism of DPTDEDA was also studied with the Coats-Redfern and Achar methods. The results show that the activation energies for the two main thermal decomposition steps are 128.03 and 92.59 kJ·mol⁻¹ with the Friedman method, and 138.75 and 106.78 kJ·mol⁻¹ with the FWO method, respectively. Although there are two main thermal decomposition steps for DPTDEDA in air, the thermal decomposition mechanism of DPTDEDA in the two steps are the same, i.e. f(α) = 3/2(1 − α)^4/3[(1 − α)^−1/3 − 1]⁻¹. __________ Translated from Acta Chimica Sinica, 2008, 66(9) (in Chinese)     

Thermal behavior and thermal safety on 3,3-dinitroazetidinium salt of perchloric acid

3,3-Dinitroazetidinium (DNAZ) salt of perchloric acid (DNAZ·HClO₄) was prepared, it was characterized by the elemental analysis, IR, NMR, and a X-ray diffractometer. The thermal behavior and decomposition reaction kinetics of DNAZ·HClO₄ were investigated under a non-isothermal condition by DSC and TG/DTG techniques. The results show that the thermal decomposition process of DNAZ·HClO₄ has two mass loss stages. The kinetic model function in differential form, the value of apparent activation energy (E _a) and pre-exponential factor (A) of the exothermic decomposition reaction of DNAZ·HClO₄ are f(α) = (1 − α)⁻¹/2, 156.47 kJ mol⁻¹, and 10^15.12 s⁻¹, respectively. The critical temperature of thermal explosion is 188.5 °C. The values of ΔS ^≠, ΔH ^≠, and ΔG ^≠of this reaction are 42.26 J mol⁻¹ K⁻¹, 154.44 kJ mol⁻¹, and 135.42 kJ mol⁻¹, respectively. The specific heat capacity of DNAZ·HClO₄ was determined with a continuous C _p mode of microcalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was evaluated as 14.2 s.     

Synthesis,molecular structure,non-isothermal decomposition kinetics and adiabatic time to explosion of 3,3-dinitroazetidinium 3,5-dinitrosalicylate

The title compound 3,3-dinitroazetidinium (DNAZ) 3,5-dinitrosalicylate (3,5-DNSA) was prepared and the crystal structure has been determined by a four-circle X-ray diffractometer. The thermal behavior of the title compound was studied under a non-isothermal condition by DSC and TG/DTG techniques. The kinetic parameters were obtained from analysis of the TG curves by Kissinger method, Ozawa method, the differential method and the integral method. The kinetic model function in differential form and the value of E _a and A of the decomposition reaction of the title compound are f(α)=4α^3/4, 130.83 kJ mol⁻¹ and 10_13.80s⁻¹, respectively. The critical temperature of thermal explosion of the title compound is 147.55 °C. The values of ΔS ^≠, ΔH ^≠ and ΔG ^≠ of this reaction are −1.35 J mol⁻¹ K₋₁, 122.42 and 122.97 kJ mol⁻¹, respectively. The specific heat capacity of the title compound was determined with a continuous C _p mode of mircocalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was obtained.     

Catalytic effect of cuprous ions on the thermal decomposition of 3,3,6,6-tetramethyl-1,2,4,5-tetraoxane in methanol solution

Thermal decomposition of 3,3,6,6-tetramethyl-1,2,4,5-tetraoxane was examined in methanol solution (1.69×10⁻² M) containing cuprous ions (5.05×10⁻⁷ M) in the temperature range from 130 to 166°C using UV spectroscopy as analytical method. The ion-catalyzed reaction follows first-order kinetics with respect to the peroxide and added cuprous ions. The temperature effect on the rate of thermal decomposition of the title compound was described by the corresponding Arrhenius equations, and its stability in solution was estimated on a quantitative level. The activation parameters of the initial step of decomposition of 3,3,6,6-tetramethyl-1,2,4,5-tetraoxane were determined (ΔH ^≠ = 14.7±0.8 kcal mol⁻¹; ΔS ^≠ = −38.9±1.4 cal mol⁻¹ K⁻¹; ΔG ^≠ = 31.0±0.8 kcal mol⁻¹). Electron-transfer mechanism was proposed for the reaction under study. The text was submitted by the authors in English.     

Synthesis and thermal decomposition kinetics of two lanthanide complexes with cinnamic acid and 2,2′-Bipyridine

The two complexes of [Ln(CA)₃bipy]₂ (Ln = Tb and Dy; CA = cinnamate; bipy = 2,2′-bipyridine) were prepared and characterized by elemental analysis, infrared spectra, ultraviolet spectra, thermogravimetry and differential thermogravimetry techniques. The thermal decomposition behaviors of the two complexes under a static air atmosphere can be discussed by thermogravimetry and differential thermogravimetry and infrared spectra techniques. The non-isothermal kinetics was investigated by using a double equal-double steps method, the nonlinear integral isoconversional method and the Starink method. The mechanism functions of the first decomposition step of the two complexes were determined. The thermodynamic parameters (ΔH ^≠ , ΔG ^≠ and ΔS ^≠ ) and kinetic parameters (activation energy E and the pre-exponential factor A) of the two complexes were also calculated.     

Kinetic and equilibrium study of the deprotonation of 4-nitrophenyl[bis(ethylsulphonyl)]methane by organic bases in acetonitrile in the presence of common cation BH<Superscript>+</Superscript> and tetrabutylammonium perchlorate

The results of kinetic and equilibrium experiments with the set of reaction of proton abstraction from 4-nitrophenyl[bis(ethylsulphonyl)]methane in acetonitrile are reported. Two strong organic bases are used: 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) and 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (MTBD). The rates of proton transfer reaction have been measured by T-jump method in the presence of perchlorate of the appropriate base as a common cation BH⁺ and supporting electrolyte-tetrabutylammonium perchlorate (TBAP) in the temperature range between 20–40°C are: k _H =1.32×10⁷−2.00×10⁷ and 2.82×10⁷−4.84×10⁷ dm ³mol⁻¹s⁻¹ for MTBD and TBD respectively. The enthalpies of activation ΔH _MTBD ^≠ =13.5 and ΔH _TBD ^≠ =18.1 kJmol⁻¹. The entropies of activation are negative: ΔS _MTBD ^≠ =−62.3 and ΔS _TBD ^≠ =−40.3 Jmol⁻¹K⁻¹. The change of the absorbance of the anion of 4-nitrophenyl[bis9ethylsulphonyl)]methane at the temperature 25°C in the presence of common cation BH⁺ gives the equilibrium constants K=705 and 906 M⁻¹ for MTBD and TBD respectively. Kinetic and equilibrium results are discussed. The possible mechanism of proton transfer reaction between 4-nitrophenyl[bis(ethylsulphonyl)]methane and cyclic organic bases: MTBD and TBD in acetonitrile is proposed.     

A kinetic analysis of thermal decomposition of polyaniline/ZrO<Subscript>2</Subscript> composite

Synthesis, characterization and thermal analysis of polyaniline (PANI)/ZrO₂ composite and PANI was reported in our early work. In this present, the kinetic analysis of decomposition process for these two materials was performed under non-isothermal conditions. The activation energies were calculated through Friedman and Ozawa-Flynn-Wall methods, and the possible kinetic model functions have been estimated through the multiple linear regression method. The results show that the kinetic models for the decomposition process of PANI/ZrO₂ composite and PANI are all D₃, and the corresponding function is ƒ(α)=1.5(1−α)^2/3[1−(1-α)^1/3]−1. The correlated kinetic parameters are E _a=112.7±9.2 kJ mol⁻¹, lnA=13.9 and E _a=81.8±5.6 kJ mol⁻¹, lnA=8.8 for PANI/ZrO₂ composite and PANI, respectively.     

Kinetic investigation on thermal decomposition of organophosphorous compounds

In this paper, the thermal behaviours of two organophosphorous compounds, N,N-dimethyl-N′,N′-diphenylphosphorodihydrazidic (NDD) and diphenyl amidophosphate (DPA), were studied by thermogravimetery (TG), differential thermal analysis (DTA) and differential scanning calorimetery (DSC) techniques under non-isothermal conditions. The results showed that NDD melts about 185 °C before it decomposes. NDD decomposition occurs in two continuous steps, in the 190–410 °C temperature range. First thermal degradation stage for NDD results a broad exothermic peak in the DTA curve that is continued with a small exothermic peak at the end of decomposition process. On the other hand, applying TG-DTA techniques indicates that DPA melts about 150 °C before it decomposes. This compound decomposes in the temperature range of 230 to 330 °C in two steps. These steps are endothermic and exothermic, respectively. Activation energy and pre-exponential factor for the first step of decomposition of each compound were found by means of Kissinger method and were verified by Ozawa–Flynn–Wall method. Activation energy obtained by Kissinger method for the first stage of NDD and DPA decompositions are 138 and 170 KJ mol⁻¹, respectively. Finally, the thermodynamic parameters (ΔG ^#, ΔH ^# and ΔS ^#) for first step decomposition of investigated organophosphorous were determined.     

New ionic liquid for inorganic cations analysis by capillary electrophoresis: 2-hydroxy- N , N , N -trimethyl-1-phenylethanaminium bis(trifluoromethylsulfonyl)imide (phenylcholine NTf2)

The potentialities of new ionic liquids (ILs) based on choline were evaluated as an electrophoretic medium in capillary electrophoresis for the analysis of alkaline and alkaline earth cations (Li⁺, K⁺, Na⁺, Cs⁺, Mg²⁺, Ba²⁺, Ca²⁺, and Sr²⁺) with indirect UV detection. Two types of capillaries were tested: an untreated fused silica and fused silica coated with a film of polyvinylalcohol. The coated capillary proved to be the best adapted for the metal ions studied. Moreover, it appeared that the nature of the ionic liquid anion influenced the baseline stability, and the bis(trifluoromethylsulfonyl) imide (NTf₂ ⁻) anion seemed to be the most efficient. These preliminary studies led us to synthesize a new ionic liquid, 2-hydroxy-N,N,N-trimethyl-1-phenylethanaminium NTf₂ (phenylcholine NTf₂). This liquid was able to act as the running electrolyte and probe, generating the background signal in indirect UV light and consequently simplifying the electrophoretic medium. Excellent baseline stability, good reproducibility, as well as good sensitivity of detection were obtained with this new ionic liquid. Thus, 510,000 plates/meter for Li⁺ with 40 mM IL were successfully obtained. The optimal concentration of IL was 20 mM with a detection limit ranging from 28 μg L⁻¹ for Li⁺ to 1,000 μg L⁻¹ for Cs⁺. This method (phenylcholine NTf₂ with polyvinylalcohol capillary) was applied to analyze different commercial source and mineral waters. Finally, the potentiality of this ionic liquid in nonaqueous capillary electrophoresis was explored. The use of phenylcholine NTf₂ with a fused silica capillary, in pure methanol medium and in the presence of acetic acid, made it possible to obtain separation selectivity different from that obtained in aqueous medium.     

Thermal Behavior of N,N＇Bis[N-（2,2,2-trinitroethyl）-N-nitro]ethylenediamine

The thermal behavior and kinetic parameters of the exothermic decomposition reaction of N‐N‐bis[N‐(2,2,2‐tri‐nitroethyl)‐N‐nitro]ethylenediamine in a temperature‐programmed mode have been investigated by means of differential scanning calorimetry (DSC). The results show that kinetic model function in differential form, apparent activation energy E_a and pre‐exponential factor A of this reaction are 3(1 ‐α)^2/3, 203.67 kJ·mol^?1 and 10^20.61s^?1, respectively. The critical temperature of thermal explosion of the compound is 182.2 °C. The values of ΔS^≠ ΔH^≠ and ΔG^≠ of this reaction are 143.3 J·mol^?1·K^?1, 199.5 kJ·mol^?1 and 135.5 kJ·mol^?1, respectively.     

Thermal behavior of 1,2,3-triazole nitrate

The thermal decomposition behaviors of 1,2,3-triazole nitrate were studied using a Calvet Microcalorimeter at four different heating rates. Its apparent activation energy and pre-exponential factor of exothermic decomposition reaction are 133.77 kJ mol⁻¹ and 10^14.58 s⁻¹, respectively. The critical temperature of thermal explosion is 374.97 K. The entropy of activation (ΔS ^≠), the enthalpy of activation (ΔH ^≠), and the free energy of activation (ΔG ^≠) of the decomposition reaction are 23.88 J mol⁻¹ K⁻¹, 130.62 kJ mol⁻¹, and 121.55 kJ mol⁻¹, respectively. The self-accelerating decomposition temperature (T _SADT) is 368.65 K. The specific heat capacity was determined by a Micro-DSC method and a theoretical calculation method. Specific heat capacity equation is C_\textp ( \textJ mol ^{- 1} \text K ^{- 1} ) = - 42.6218 + 0.6807T C_{\text{p}} \left( {{\text{J mol}}^{ - 1} {\text{ K}}^{ - 1} } \right) = - 42.6218 + 0.6807T (283.1 K < T < 353.2 K). The adiabatic time-to-explosion is calculated to be a certain value between 98.82 and 100.00 s. The critical temperature of hot-spot initiation is 637.14 K, and the characteristic drop height of impact sensitivity (H ₅₀) is 9.16 cm.     

Synthesis and thermal decomposition of ditetrazol-5-ylamine

Ditetrazol-5-ylamine (DTA) was synthesized from cyanuric chloride in four steps. The thermal decomposition of DTA in the solid state was studied by thermogravimetry, volumetry, mass spectrometry, IR spectroscopy, and calorimetry. Under isothermal conditions at 200–242 °C, thermal decomposition obeys the first order autocatalytic kinetics. The kinetic and activation parameters of DTA decomposition were determined. The composition of gaseous reaction products and the structure of condensed residue were studied. The thermal effect of thermal DTA decomposition is 281.4 kJ mol⁻¹. The nitrogen content in a mixture of gaseous products formed by the reaction in a temperature interval of 200–242 °C exceeds 97 vol.%. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1660–1664, July, 2005.     

Studies of dehydration kinetics of Li2SO4·H2O by the master plots method

The kinetics of Li₂SO₄·H₂O dehydration in static air atmosphere was studied on the basis of nonisothermal measurements by differential scanning calorimetry. Dehydration data were subjected to an integral composite procedure, which includes an isoconversional method, a master plots method and a model-fitting method. Avrami-Erofeev equation was found to describe all the experimental data in the range of conversion degrees from 0.1 to 0.9. The determined activation energy equals 65.45 kJ·mol⁻¹ with standard deviation ±0.47 kJ·mol⁻¹. The estimated value of parameter m in Avrami-Erofeev equation is 2.15 with standard deviation ±0.11. Also, the obtained pre-exponential factor is 7.79×10⁵ s⁻¹ with standard deviation ±0.55×10⁵ s⁻¹. The results show that the present integral composite procedure gives self-consistent kinetic parameters.     

Thermal behavior of 3,4,5-triamino-1,2,4-triazole dinitramide

The thermal decomposition behavior of 3,4,5-triamino-1,2,4-triazole dinitramide was measured using a C-500 type Calvet microcalorimeter at four different temperatures under atmospheric pressure. The apparent activation energy and pre-exponential factor of the exothermic decomposition reaction are 165.57 kJ mol⁻¹ and 10^18.04 s⁻¹, respectively. The critical temperature of thermal explosion is 431.71 K. The entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠), and free energy of activation (ΔG ^≠) are 97.19 J mol⁻¹ K⁻¹, 161.90 kJ mol⁻¹, and 118.98 kJ mol⁻¹, respectively. The self-accelerating decomposition temperature (T _SADT) is 422.28 K. The specific heat capacity of 3,4,5-triamino-1,2,4-triazole dinitramide was determined with a micro-DSC method and a theoretical calculation method. Specific heat capacity (J g⁻¹ K⁻¹) equation is C _p = 0.252 + 3.131 × 10⁻³  T (283.1 K < T < 353.2 K). The molar heat capacity of 3,4,5-triamino-1,2,4-triazole dinitramide is 264.52 J mol⁻¹ K⁻¹ at 298.15 K. The adiabatic time-to-explosion of 3,4,5-triamino-1,2,4-triazole dinitramide is calculated to be a certain value between 123.36 and 128.56 s.     

Solvation Structure and Complexation of the Manganese(II) Ion in N,N-Dimethylpropionamide and N,N,N′,N′-Tetramethylurea Studied by Means of Titration Calorimetry and Raman Spectroscopy

Aprotic N,N-dimethylpropionamide (DMPA) and N,N,N′,N′-tetramethylurea (TMU) are both strong donor solvents and coordinate to metal ions through the carbonyl oxygen atom. These solvents show a different conformational aspect in the bulk phase, i.e., DMPA exists as either a planar cis or a nonplanar staggered conformer, while TMU exists in a single planar cis conformer. It has been established that the manganese(II) ion is solvated by five molecules in both solvents. Interestingly, although the planar cis conformer of DMPA is more favorable than the nonplanar staggered one in the bulk phase, the reverse is the case in the coordination sphere of the metal ion, i.e., a conformational change occurs upon solvation. To reveal the thermodynamic aspect of this conformational change, the complexation of Mn(II) with bromide ions in DMPA and TMU has been studied by titration calorimetry at 298 K. It was found that the Mn(II) ion forms mono-, di- and tri-bromo complexes in both solvents, and their formation constants, enthalpies and entropies were obtained. The Δ H∘₁ value for MnBr⁺ strongly depends on the solvent, i.e., it is positive (19.4 kJ-mol⁻¹) in DMPA and negative (−8.7 kJ-mol⁻¹) in TMU, whereas the Δ H^∘₂ and Δ H∘₃ values for the stepwise formation of MnBr₂ and MnBr₃⁻ are both small and negative. The enthalpy of transfer Δ_tH^∘ from DMPA to TMU, which is evaluated on the basis of the extrathermodynamic TATB assumption, is 25.5 kJ-mol⁻¹ for Mn²⁺ and −3.6 kJ-mol⁻¹ for MnBr⁺. These values indicate that the difference between the formation enthalpy of MnBr⁺ in the two solvents, Δ H^∘₁ (DMPA) – Δ H∘₁ (TMU), is mainly ascribed to the value of Δ_tH^∘(Mn²⁺). It is found that the metal ion is also five-coordinated in the monobromo complex, MnBr(DMPA)₄⁺ . The enthalpy for the conformational change of DMPA from its planar cis to the nonplanar staggered form is evaluated to be −11 and −5.5 kJ-mol⁻¹ for Mn(DMPA)₅^{2 +} and MnBr(DMPA)₄⁺, respectively. Note that these values are significantly smaller than the corresponding value (5.0 kJ-mol⁻¹) in the bulk phase. We thus conclude that, although steric hindrance among solvent molecules is reduced by replacing one DMPA of Mn(DMPA)₅^{2 +} with the relatively small bromide ion, DMPA molecules are still sterically hindered in the MnBr(DMPA)₄⁺ complex.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

Thermochemistry of europium and dithiocarbamate complex Eu(C5H8NS2)3(C12H8N2)

A solid complex Eu(C₅H₈NS₂)₃(C₁₂H₈N₂) has been obtained from reaction of hydrous europium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen⋅H₂O) in absolute ethanol. IR spectrum of the complex indicated that Eu³⁺ in the complex coordinated with sulfur atoms from the APDC and nitrogen atoms from the o-phen. TG-DTG investigation provided the evidence that the title complex was decomposed into EuS. The enthalpy change of the reaction of formation of the complex in ethanol, Δ_r H _m ^θ(l), as –22.214±0.081 kJ mol^–1, and the molar heat capacity of the complex, c _m, as 61.676±0.651 J mol^–1 K^–1, at 298.15 K were determined by an RD-496 III type microcalorimeter. The enthalpy change of the reaction of formation of the complex in solid, Δ_r H _m ^θ(s), was calculated as 54.527±0.314 kJ mol^–1 through a thermochemistry cycle. Based on the thermodynamics and kinetics on the reaction of formation of the complex in ethanol at different temperatures, fundamental parameters, including the activation enthalpy (ΔH _≠ ^θ), the activation entropy (ΔS _≠ ^θ), the activation free energy (ΔG _≠ ^θ), the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A) and the reaction order (n), were obtained. The constant-volume combustion energy of the complex, Δ_c U, was determined as –16937.88±9.79 kJ mol^–1 by an RBC-II type rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_c H _m ^θ, and standard enthalpy of formation, Δ_f H _m ^θ, were calculated to be –16953.37±9.79 and –1708.23±10.69 kJ mol^–1, respectively.     

Adsorption syntax of Au(III) on unloaded polyurethane foam

The nature of adsorption behavior of Au(III) on polyurethane (PUR) foam was studied in 0.2M HCl aqueous solution. The effect of shaking time and amount of adsorbent were optimized for 3.16·10⁻⁵M solution of Au(III) in 0.2M HCl. The classical Freundlich and Langmuir adsorption isotherms have been employed successfully. The Freundlich parameters 1/n and adsorption capacityK are 0.488±0.016 and (1.40±0.22)·10⁻² mol·g⁻¹, respectively. The Langmuir constants of saturation capacityM and binding energyb are (1.66±0.08)·10⁻⁴mol·g⁻¹ and 40294±2947 l·g⁻¹, respectively, indicating the monolayer chemical sorption. The mean free energy (E) of adsorption of Au(III) on PUR foam has been evaluated using D-R isotherm and found to be 11.5±0.16 kJ·mol⁻¹ reflecting the ion exchange type of chemical adsorption. The effect of temperature on the adsorption has also been studied. the isosteric heat of adsorption was found to be 44.03±1.66 kJ·mol⁻¹. The thermodynamic parameters of ΔG, ΔH, ΔS and equilibrium constantK _c have been calculated. The negative values of ΔG, ΔH and ΔS support that the adsorption of Au(III) on PUR foam is spontaneous, exothermic and of ion exchange chemisorption. The nature of the Au(III) species sorbed on PUR foam have been discussed.     

Kinetic Study on the Exothermic First-stage Decomposition Reaction of 2,4,8,10-Tetranitro-2,4,8,10-tetraaza- spiro[5,5]undecane-3,9-dione

Introduction 2,4,8,10-Tetranitro-2,4,8,10-tetraazaspiro[5,5]udecane- 3,9-dione is a typical cyclourea nitramine (Figure 1). Its crystal density is 1.91 gcm-3. The detonation velocity according to =1.90 gcm-3 is about 8670 ms-1. Its sensitivity to impact is better than that of cyclotrimethy- lenetrinitramine. So it is the potential high explosive. Its preparation,1-3 properties,1-3 hydrolytic behavior4 and electronic structure3 have been reported. In the present work, we report its kinetic pa…