ORGANO-SOLUBLE FLUORINATED POLYIMIDES DERIVED FROM a,a-BIS(4-AMINO-3,5- DIMETHYLPHENYL)-4′-FLUOROPHENYL METHANE AND VARIOUS AROMATIC DIANHYDRIDES

 Organo-soluble fluorinated polyimides were synthesized by the polycondensation of a new aromatic diamine -bis(4-amino-3,5-dimethylphenyl)-4′-fluorophenyl methane with several aromatic dianhydrides. The one-step polymerization procedure was conducted at 180℃ in m-cresol, producing the polyimides with inherent viscosities of 0.680.76 dL•g1. The polyimides could be soluble not only in polar aprotic solvents, such as N-methyl-2-pyrrolidinone, and N,N-dimethylacetamide, but also in common organic solvents, such as chloroform, cyclopentanone, m-cresol and so on. The polyimide films show excellent transparency with the UV-Vis cut-off lengths of 310360 nm and light transmittances of higher than 80% in the visible region. In addition, the polyimides exhibit good thermal stability with an initial decomposition temperature (Td) higher than 530℃ and have more than 60% of residual weight retentions at 700℃.     

SYNTHESIS AND CHARACTERIZATION OF ORGANO-SOLUBLE FLUORINATED POLYIMIDES FROM 4,4′-BIS(3-AMINO-5-TRIFLUOROMETHYLPHENOXY)-BIPHENYL AND VARIOUS AROMATIC DIANHYDRIDES

An aromatic diamine monomer, 4,4′-bis(3-amino-5-trifluoromethyl phenoxy)-biphenyl (TFBPDA), was synthesized via the nucleophilic displacement reaction of 3,5-dinitrobenzotrifluoride and 4,4′-biphenol. The monomer was reacted with various aromatic dianhydrides via the high temperature polycondensation procedure to provide a series of polyimides. The polyimides, PI-1 to PI-4, show good solubility not only in aprotic solvents, such as N-methyl-2-pyrrolidinone and N,N-dimethylacetamide, but also in many common solvents, such as m-cresol, chloroform and cyclopentanone. PI-4, derived from 4,4′-(hexafluoroisopropylidene)diphthalic anhydride and TFBPDA, was even soluble in toluene. Moreover, PI films exhibit good thermal stability, outstanding transparency in the visible light region and acceptable mechanical and electrical properties. The excellent combined properties of the polyimides make them as a good candidate for fabricating microelectronics.     

SYNTHESIS AND CHARACTERIZATION OF ORGANO-SOLUBLE FLUORINATED POLYIMIDES FROM 4,4''''-BIS(3-AMINO-5-TRIFLUOROMETHYLPHENOXY)-BIPHENYL AND VARIOUS AROMATIC DIANHYDRIDES

An aromatic diamine monomer,4,4'-bis(3-amino-5-trifluoromethyl phenoxy)-biphenyl (TFBPDA),wassynthesized via the nucleophilic displacement reaction of 3,5-dinitrobenzotrifluoride and 4,4'-biphenol.The monomer wasreacted with various aromatic dianhydrides via the high temperature polycondensation procedure to provide a series ofpolyimides.The polyimides,PI-1 to PI-4,show good solubility not only in aprotic solvents,such as N-methyl-2-pyrrolidinone and N,N-dimethylacetamide,but also in many common solvents,such as m-cresol,chloroform andcyclopentanone.PI-4,derived from 4,4'-(hexafluoroisopropylidene)diphthalic anhydride and TFBPDA,was even soluble intoluene.Moreover,PI films exhibit good thermal stability,outstanding transparency in the visible light region and acceptablemechanical and electrical properties.The excellent combined properties of the polyimides make them as a good candidate forfabricating microelectronics.     

SYNTHESIS AND CHARACTERIZATION OF HIGHLY ORGANO-SOLUBLE POLYIMIDES BASED ON ALICYCLIC 1,8-DIMETHYL-BICYCLO[2.2.2]OCT-7- ENE-2,3,5,6-TETRACARBOXYLIC DIANHYDRIDE AND AROMATIC DIAMINES

Organo-soluble alicyclic polyimides (ALPIs) were synthesized from an alicyclic dianhydride, 1,8-dimethylbicyclo[2.2.2] oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (DMEA) and several multialkyl-substituted 4,4′-diaminodiphenylmethane compounds, including 3,3′-dimethyl-4,4′-diaminodiphenyl methane (DMDA), 3,3′,5,5′-tetramethyl-4,4′-diaminodiphenyl methane (TMDA) and 3,3′,5,5′-tetraethyl-4,4′-diaminodiphenylmethane (TEDA). For comparison, the aromatic polyimides (ARPIs) were synthesized from the aromatic dianhydride, 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and the same diamines. The ALPIs exhibited better solubility and transparency,but worse thermal stabilities and mechanical properties than those of the ARPIs. And the ALPIs could be dissolved in common organic solvents, such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), chloroform, tetrahydrofuran, m-cresol and so on. The ALPI films had an UV-Vis cut-off at 320 nm and a transmittance of higher than 80% in the visible region. In addition, the ALPIs showed thermal decomposition temperatures (Td) of about 450℃, which was nearly 100℃ lower than that of the ARPIs.     

基于1,2-二氢-2-(4-羧基苯基-4-[4-(4-羧基苯氧基)-3-甲基苯基](2H)二氮杂萘-1-酮的新型芳香聚酰胺的简易合成

A new monomer diacid, 1,2-dihydro-2-(4-carboxylphenyl)-4-[4-(4-carboxylphenoxy)-3-methylphenyl]phtha-lazin-1-one (3), was synthesized through the aromatic nucleophilic substitution reaction of a readily available unsymmetrical phthalazinone 1 bisphenol-like with p-chlorobenzonitrile in the presence of potassium carbonate in N,N-dimethylacetamide and alkaline hydrolysis. The diacid could be directly polymerized with various aromatic diamines 4a-4e using triphenyl phosphite and pyridine as condensing agents to give five new aromatic poly(ether amide)s 5a-5e containing the kink non-coplanar heterocyclic units with inherent viscosities of 1.30-1.54 dL/g.The polymers were readily soluble in a variety of solvents such as N,N-dimethylformamide (DMF), N,N-dimethyl-acetamide (DMA), dimethylsulfoxide (DMSO), N-methyl-2-pyrrolidinone (NMP), and even in m-cresol and pyridine (Py). The transparent, flexible and tough films could be formed by solution casting. The glass transition tem-peratures Tg were in the range of 286-317℃.     

Aromatic polyimides with tertbutyl-substituted and pendent naphthalene units: synthesis and soluble,transparent properties

A novel non-coplanar aromatic diamine monomer,3,3'-ditertbutyl-4,4'-diaminodiphenyl-4'-naphthylmethane(TAPN) was synthesized by a condensation reaction of 2-tertbutylaniline and 1-naphthaldehyde under catalyst hydrochloric acid.The structure of the monomer was confirmed by FTIR,NMR,elementary analysis and mass spectrometry.A series of aromatic polyimides(PIs) were synthesized via conventional one-step polycondensation from TAPN and various commercial aromatic dianhydrides.All of the PIs exhibit excellent solubility in common organic solvents,even in low boiling point solvents such as chloroform(CHCl3),tetrahydrofuran(THF) and acetone.The PIs present outstanding thermal stability with the glass transition temperature(Tg) ranged from 299 °C to 350 °C,and the temperature at 10% weight loss ranged from 490 °C to 504 °C,and high optical transparency with the cutoff wavelengths of 306-356 nm.Moreover,the flexible and tough PI films have prominent mechanical properties with tensile strengths in the range of 77.6-90.5 MPa,tensile modulus in the range of 1.8-2.4 GPa and elongation at break in the range of 6.3%-9.5%,as well as lower dielectric constant(2.89-3.12 at 1 MHz) and lower moisture absorption(0.35%-0.66%).     

SYNTHESIS OF NEW AROMATIC POLY（AMIDE IMIDE）S FROM UNSYMMETRICAL EXTENDED DIAMINE CONTAINING A PHTHALAZINONE MOIETY

The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a series of new aromatic poly(amide imide)s (3a-e) containing the kink non-coplanar phthalazinone heterocyclic units in the polymer main chains with inherent viscosities of 0.58-0.66 dL/g. The polymers are readily soluble in a variety of solvents such as N,N-dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide, N-methyl-2-pyrrolidinone, pyridine and m-cresol and can be cast to form flexible and tough films. The glass transition temperatures of polymers (T8) are in the range of 301-327℃, and the temperatures for 5% weight loss in nitrogen are in the range of 498-521℃.     

Organosoluble and thermally stable polyimides derived from a new diamine containing bulky-flexible triaryl pyridine pendent group

A novel kind of aromatic diamine,N-(4-(4-(2,6-diphenyl pyridine-4-yl)phenoxy)phenyl)-3,5-diaminobezamide (DPDAB),was synthesized via aromatic nucleophilic substitution of 3,5-dinitrobenzoylchloride with 4-(4-(2,6- diphenylpyridine-4-yl)phenoxy)aniline(DPPA),followed by palladium-catalyzed hydrazine reduction.This monomer was used to prepare polyimides(PIs)based on reaction with several commerically avaiable tetracarboxylic dianhydrides such as pyromellatic dianhydride(PMDA),benzophenone tetracarboxylic acide dianhydride(BTDA)and bicycle[2.2.2]oct-7-enc- 2,3,5,6-tetracarboxylic dianhydride(BCDA).These PIs had inherent viscosity in the range of 0.34-0.76 dL/g and showed good solubility in various aprotic polar solvents.The glass-transition tempratures(T_gs)of the PIs were in the range of 184-302℃,and showed high thermal stability with 10%weight loss in the temperature range of 360-500℃under nitrogen atmosphere.     

A novel soluble polyamide containing xanthene structure and trifluoromethylphenoxy pendent

<正>A novel polyamide containing xanthene structure and trifluoromethylphenoxy pendent was prepared from 9,9-bis[4-(4- aminophenoxy)phenyl]xanthene,a novel diamine with 2-(4-trifluoromethylphenoxy)terephthaloyl chloride,by the low temperature polycondensation.This new polyamide with the inherent viscosity of 0.95 dL/g was amorphous and readily soluble in polar solvents such as DMAc,m-cresol,etc.This polyamide showed the glass transition temperature(T_g) of 236℃,decomposition temperature (Td) at 5%weight loss of 455℃and char yield of 56%at 800℃in N_2.Transparent,flexible,and tough film of the polymer cast from DMAc solution exhibited tensile strength of 93 MPa,elongation at break of 14%,initial moduli of 2.2 GPa.The electric properties such as the dielectric constant of 3.03(1 MHz) and surface resistance(2.78×10~(14)Ω),and the moisture uptake of 1.36% were also described.     

Synthesis of Methyl—substituted Phthalazinone—based Aromatic Poly（amide imide）s

A series of novel aromatic poly (amide imide)s containing phthalazinone moietics were prepared from 2-(4-aminophenyl)-4-[3-methyl-4-(4-aminophenoxy)-2,3-phthalazinone-1], a novel diamine 1 with our diimide-dicarboxylic acids by Yamazaki phosphorylation method with the inherent viscosity of 0.36-0.65 dL/g. These polymers had high glass transition temperatures above 300℃ and they lost 10% weight between 426-475℃ in N2. The structure of diamine 1 and the polymers was confirmed by IR,^1H NMR and MS. The obtained polymers were readily soluble in polar solvents such as NMP,m-cresol etc. and easily cast into tough,flexible films. The X-ray indicated that they are all amorphous.     

SYNTHESIS AND CHARACTERIZATION OF POLY(PHTHALAZINONE ETHER PHOSPHINE OXIDE)S BY N―C COUPLING REACTION

<正>Based on several unsymmetrical,twist,noncoplanar phthalazinone-containing monomers 2a-2e and an active bis(4-fluorophenyl)phenyl phosphine oxide(BFPPO) monomer,a series of novel poly(phthalazinone ether phosphine oxide)s (PPEPO) was synthesized by anhydrous K_2CO_3 mediated N—C coupling reaction in DMAc.The polymers exhibited good thermal properties with T_gs ranging from 267℃to 306℃and 5%weight loss temperatures in nitrogen higher than 430℃, together with high char yield upon prolonged heating at 800℃(35%—56%).Moreover,the polymers were readily soluble in common organic solvents,such as N-methyl-2-pyrrolidone,chloroform and m-cresol.These polymers had inherent viscosities in the range of 0.45-0.72 dL/g and could be cast into flexible and colorless films by spin coating or casting approach.     

Synthesis and characterization of highly soluble aromatic polyimides

Two highly soluble aromatic polyimides were synthesized successfully from a diamine with two tert-butyl groups （MBTBA）and dianhydrides with a thioether or sulfone moiety（DTDA and DSDA）.Both of them showed excellent solubility in common solvents such as chloroform,tetrahydrofuran and dioxane at the room temperature.The number-average molecular weight was 6.0×10⁴ and 8.3×10⁴ according to gel permeation chromatography relative to a polystyrene standard,and the polydispersity index was 1.80 and 1.82 respectively.The glass-transition temperatures of them were 286℃and 314℃（or 315℃and 358℃）respectively,as measured by differential scanning calorimetry（or dynamic mechanical analysis）.The 5%weight loss temperature of both was near 490℃in N₂ by thermogravimetric analysis.These results indicated that the tert-butyl pendent groups reduced the interactions among polymer chains and the thioether or sulfone moiety was flexible which may improve their solubility in conventional organic solvents without the loss of thermal stability. Transparent and flexible films of the two polyimides were obtained via solution casting.The MBTBA-DTDA membrane had higher storage moduli than those of the MBTBA-DSDA membrane.     

Fluorene-bridged polyphenylquinoxalines with high solubility and good thermal stability: Synthesis and properties

<正>A novel fluorene-bridged tetraketone monomer,9,9-bis[(4-benzilyloxy)phenyl]fluorene(FLTK) was synthesized and characterized.The tetraketone was polymerized with various aromatic tetraamines to afford a series of polyphenylquinoxalines(PPQs).The obtained polymers were found to be soluble in common organic solvents such as N-methyl-2-pyrrolidone(NMP),chloroform and m-cresol.Flexible and tough PPQ films obtained by spin-casting their NMP solutions exhibited tensile strengths higher than 60 MPa.The films also demonstrated good thermal stability up to 500℃in nitrogen and glass transition temperatures higher than 280℃.In addition,the PPQ films exhibited good hydrolytic stability. High surface and volume resistivity retentions were achieved for the films after immersion or boiling in water for 24 h.     

Synthesis and characterization of polyamides derived from (4-(4-(2, 6-diphenylpyridin-4yl)phenoxy)phenyl)-3, 5-diaminobezamide

New types of polyamides containing pendent triaryl pyridine groups were successfully synthesized by direct polycondensation of a symmetry diamine,（4-（4-（2,6-diphenylpyridin-4yl）phenoxy）phenyl）-3,5-diaminobezamide（DPDAB）, and various aromatic and aliphatic dicarboxylic diacids in NMP using triphenyl phosphate（TPP） and pyridine as catalyst. The diamine and all the prepared polyamides were fully characterized by using FT-IR,¹H-NMR,UV-Vis spectroscopy, fluorimetry and elemental analysis.The inherent viscosity of polyamides ranged from 0.45 dL/g to 0.68 dL/g.All the polymers exhibited solubility in common polar aprotic solvents such as NMP,DMAc,DMF,DMSO,pyridine,HMPA,and even in less polar solvents such as THF and m-cresol at room temperature.Thermal properties of polyamides were evaluated by means of DSC,DMTA and TGA.These polymers showed glass transition temperatures（T_g） in the range of 138-210℃. Their initial decomposition temperature（T_i） varied from 265℃to 310℃under N₂.The dilute solution（0.2 g/dL） of polyamides in DMF exhibited fluorescence emission withλ_max in the range of 470-550 nm.     

SYNTHESIS AND CHARACTERIZATION OF ORGANSOLUBLE POLYIMIDE AND COPOLYIMIDES FROM ALICYCLIC DIANHYDRIDE

A kind of highly organsoluble polyimide and copolyimides were successfully synthesized from bicyclo（2.2.2）-oct- 7-ene-2,3,5,6-tetracarboxylic dianhydride （BCDA）, the commercial diamine 4,4＇-methylenedianiline （MDA） and the designed diamine 4,4＇-methylenebis-（2-tert-butylaniline） （MBTBA）. The polyimide from BCDA and MBTBA is highly soluble in conventional low boiling point solvents （such as chloroform, tetrahydrofuran） at room temperature. But the solubility of the copolyimides in conventional solvents decreased with the molar ratio of MBTBA and MDA decreased. When the molar ratio of MBTBA and MDA was larger than 7/3, the copolyimides can be soluble in low boiling point solvents at room temperature to form a transparent, flexible, tough film by solution casting. When the molar ratio of MBTBA and MDA was between 7/3 and 1/9, they can only be soluble in hot dipolar aprotic solvents （such as DMF, NMP etc.） and form films too. The copolyimide was only soluble in m-cresol when the molar ratio of MBTBA and MDA was lower than 1/9. The number-average molecular weights of the soluble copolyimides were larger than 5.8 × 1064 g/mol by GPC and their polydispersity indices were higher than 1.4. Only one glass transition temperature of these copolyimides was detected around 400℃ by DMA. The copolyimides did not show appreciable decomposition up to 430℃ in N2.     

SYNTHESIS AND CHARACTERIZATION OF HIGHLY ORGANO-SOLUBLE POLYIMIDES BASED ON ALICYCLIC 1,8-DIMETHYL-BICYCLO[2.2.2]OCT-7- ENE-2,3,5,6-TETRACARBOXYLIC DIANHYDRIDE AND AROMATIC DIAMINES*

 Organo-soluble alicyclic polyimides (ALPIs) were synthesized from an alicyclic dianhydride, 1,8-dimethyl-bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (DMEA) and several multialkyl-substituted 4,4'-diaminodiphenylmethane compounds, including 3,3'-dimethyl-4,4'-diaminodiphenyl methane (DMDA), 3,3',5,5'-tetra-methy]-4,4'-diaminodiphenyl methane (TMDA) and 3,3',5,5'-tetraethyl-4,4'-diaminodiphenylmethane (TEDA). For comparison, the aromatic polyimides (ARPIs) were synthesized from the aromatic dianhydride, 3,3',4,4'-benzo-phenonetetracarboxylic dianhydride (BTDA) and the same diamines. The ALPIs exhibited better solubility and transparency,but worse thermal stabilities and mechanical properties than those of the ARPIs. And the ALPIs could be dissolved in common organic solvents,such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), chloroform, tetrahydrofuran, m-cresol and so on. The ALPI films had an UV-Vis cut-off at 320 nm and a transmittance of higher than 80% in the visible region. In addition, the ALPIs showed thermal decomposition temperatures (T_d) of about 450℃, which was nearly 100℃ lower than that of the ARPIs.     

Wholly aromatic chiral polyamides bearing pendant phthalimido and L-isoleucine moities

<正>A potential biodegradable and optically active bulky chiral aromatic amide-imidic diacid monomer,(2S,3S)-5-(3- methyl-2-phthalimidylpentanoylarnino)isophthalic acid(7),containing a rigid phthalimide and flexible L-isoleucine pendant group was synthesized in three steps.New aromatic polyamides including pendant phthalimido groups and flexible side spacers have been synthesized by direct polycondensation reaction of equimolar amounts of different aromatic diamines with an optically active diacid 7,using N-methyl-2-pyrrolidone(NMP) as a solvent and triphenyl phosphite/CaCl_2/pyridine as a condensing agent.These polyamides were characterized by FTIR,~1H-NMR spectroscopy,specific rotation, thermogravimetric and elemental analysis.The resulting polymers have inherent viscosities in the range of 0.21-0.45 dL/g. Amino acid existence in this backbone results in optically active polymers.Due to introduction of bulky and flexible groups in these polyamides,they show improved solubility in polar aprotic solvents such as NMP and dimethylacetamide and also good thermal stability(10%weight loss temperatures in excess of 330℃,and char yields at 600℃in nitrogen higher than 62%).     

EFFECT OF THE COMPOSITION OF m-CRESOL/H2O SOLVENT ON HYDRODYNAMIC PROPERTIES OF NYLON 6

The intrinsic viscosity [ η], Huggins constant (KH), [ η]0, α3 and flow activation energy values of nylon 6 have been measured in water/m-cresol (0/100-20/80) systems at different temperatures (20-60℃). It has been found that the intrinsic viscosity, [η]0 and α3 increase with the increase in water contents in m-cresol up to 15% and then decrease. They increase with the increase in temperature irrespective of solvent composition. It has been noted that the percent increase of α3 is the highest at 60℃ and the lowest at 20℃ for a particular solvent system. The intrinsic viscosity data obey Arrhenius equation over the considered conditions. The activation energy and the KH values decrease very sharply with the addition of water,giving a minimum value at 15% of water and then increase slowly. The variation of all the parameters has been explained in terms of variation in thermodynamic quality of solvent with the addition of water to m-cresol and change in temperature,resulting in the change of conformational and orientational properties of polymer molecules. This change of solvent quality also results in variation of selective sorption of solvent over the polymer, such as hydrogen bonding, etc.     

SYNTHESIS AND CHARACTERIZATION OF FLUORINATED POLYAMIDES DERIVED FROM UNSYMMETRICAL DIAMINES CONTAINING THE PHTHALAZINONE MOIETY

A novel unsymmetrical fluorinated diamine monomer with kink non-coplanar heterocyclic structures, 1,2-dihydro- 2-（4-amino-2-trifluoromethyophenyo）-4-[4-（4-amino-2-trifluoromethyophenoxy）phenyo]（2H）phthaoazin-1-oneo was prepared through the nucleophilic substitution reaction of 1-trifluromethyl-2-chloro-5-nitrobenzene with 1,2-dihydro-4-（4- hydroxyphenyl）（2H）phthalazin-l-one in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd-C. A series of new fluorinated polyarnides were synthesized by the phosphorylation polyamidation of the fluorinated diamine with various dicarboxylic acids. The prepared polymers were obtained in quantitative yields with moderately and high inherent viscosities （0.47-0.87 dL/g）. They were all amorphous and readily soluble in various polar aprotic solvents such as N-methyl-2-pyrrolidone （NMP）, N,N-dimethylformamide （DMF）, N,N-dimethylacctamide （DMAc）, pyridine （Py） and m-cresol at room temperature. These fluorinated polyamides have excellent thermal properties. The glass transition temperatures were all above 300℃. The 5% and 10% weight loss temperatures were in the range of 437-466℃ and 482-525℃ in nitrogen atmosphere, respectively.     

Synthesis, characterization and biological activity of polyketones

Polyketone resins have been prepared by the Friedel-Crafts polymerization of dithiophenylidenecyclopentanone (Ⅰ), dithiophenylidenecyclohexanone (Ⅱ) and dithiophenylideneacetone (Ⅲ) with adipoyl, sebacoyl and terephthaloyl dichlorides using boron trifluoride as catalyst and carbon disulphide as solvent. Polymers were characterized with IR, 1 H-NMR, and the results showed the presence of carbonyl of ketonic groups in the main chain. The polyketones have inherent viscosities of 0.40-0.70 dL/g. All the polymers are semicrystalline and most of them are partially soluble in most common organic solvents but freely soluble in aprotic solvents. The temperatures of 50% weight loss are as high as 185℃ to 280℃ in air, indicating that these aromatic polyketones have excellent thermal stability. All the polyketones were tested for their antimicrobial activity against bacteria and fungi.