Oxidative addition of trifluoromethanesulfonamide to cycloalkadienes

Reactions of trifluoromethanesulfonamide with cyclopentadiene, cyclohexa-1,3- and -1,4-dienes, cyclohepta-1,3,5-triene, and cycloocta-1,3-diene in the presence of t-BuOCl-NaI were studied. Trifluoromethanesulfonamide added at one double bond of cyclopentadiene and cyclohexa-1,3-diene in regio- and stereoselective fashion to give N-(5-iodocyclopent-2-en-1-yl)trifluoromethanesulfonamide and trans-N,N′-cyclohex-3-ene-1,2-diylbis(1,1,1-trifluoromethanesulfonamide), respectively. The reaction with cyclohexa-1,4-diene involved both isolated double bonds to produce N,N′-(2-chloro-5-iodocyclohexane-1,4-diyl)bis(1,1,1-trifluoromethanesulfonamide) which underwent halophilic reduction of the CHI group by the action of NaI and elimination of HCl, leading to N,N′-(cyclohex-2-ene-1,4-diyl)bis(1,1,1-trifluoromethanesulfonamide). Under analogous conditions, cyclohepta-1,3,5-triene was oxidized to benzaldehyde, while no reaction with trifluoromethanesulfonamide occurred.     

Transition Metal Cation Salts in Organic Synthesis

Reaction of lithium diisopropylamide (LDA) with (η⁴-1,3-cyclohexadiene)Fe(CO)₃ complexes bearing functionalized side chains at C-5, under an atmosphere of carbon monoxide, gives bridged bicyclo[3,2,1]octene and bicyclo[3,3,1]nonene systems after electrophilic quenching. Under the same reaction conditions, intramolecular cyclization of acyclic (η⁴- 1,3-butadiene)Fe(CO)₃ complexes with functionalized side chains at the terminal position of the diene ligands furnishes fused bicyclo[3.3,0]octanone and bicyclo[4.3.0]nonanone derivatives after acid quenching. The addition of a variety of the highly functionalized zinc-copper reagents RCu(CN)ZnI to the (η⁷-cycloheptatrienyl)Cr(CO) gives (η⁶-cyclohepta-1,3,5-triene)Cr(CO)₃ complexes with a functionalized side-chain at the C-7 position of the ring. Intramolecular cyclization of ester-subsbtuted adducts using lithium diisopropylamide generates fused bicyclo[5.3.0]decane and bicyclo[5.4.0]undecane derivatives. The addition of a variety of the highly functionalized zinc-copper reagents RCu(CN)Znl to the (η⁴-cyclohexa-1,3-diene)Mo(CO)₂(Cp) at the terminus of the coordinated diene ligand gives [Mo(π-allyl)(CO)₂(Cp)](Cp = cyclopentadienyl) complexes with the functionalized side-chain at the C-4 position of the ring. Intramolecular cyclization of the (π-allyl)molybdenum complex containing a pendant propanoic acid unit generates the δ-lactone derivative.     

Synthesis of Si- and N-containing bicyclo[4.2.1]nona-2,4-dienes and bicyclo[4.2.1]nona-2,4,7-trienes

A [6π+2π] cycloaddition of Si- and N-containing alkynes and 1,2-dienes to cyclohepta-1,3,5-trienes in the presence of the two-component catalytic system (acac)₂TiCl₂-Et₂AlCl gives rise to the corresponding bicyclo[4.2.1]nona-2,4-diene and bicyclo[4.2.1]nona-2,4,7-triene derivatives.     

Stereospecific preparation of symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes from 1-bromo-1-fluoroalkenes

A straightforward method to prepare symmetrical (1Z, 3Z)- and (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes is described. High E/Z ratio 1-bromo-1-fluoroalkenes, prepared by isomerization from the E/Z ≈ 1:1 isomeric mixtures, reacted with Bu₃SnSnBu₃ and Pd(PPh₃)₄ to afford (1Z, 3Z)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes in good yield. (Z)-1-Bromo-1-fluoroalkenes, which were prepared by kinetic reduction from 1-bromo-1-fluoroalkenes (E/Z ≈ 1:1), can undergo similar reaction with Bu₃SnSnBu₃ and Pd(PPh₃)₄/CuI to prepare (1E, 3E)-2,3-difluoro-1,4-disubstituted-buta-1,3-dienes.     

Influence de la longueur d'onde sur la photoisomerisation de derives de l'hexatriene-1,3,5

Kinetic studies of photoisomerization of 1-phenyl 6-methyl-cyclohexa-1,3-diene, and of the four isomeric 5-phenylhepta-1,3,5-trienes, have been performed at 313, 254, 228 and 214 nm. Photoreactions of these compounds are dependent on the wavelength of irradiation. Photolysis at short wavelength of Z,E-5-phenylhepta-1, 3,5-triene initiates a new reaction, sigmatropic [1,5] hydrogen migration, forming an ene-allenic compound. Thermal reactivity data for polyenic compounds supports the assigned structures.     

4-alkyl(aryl)-1-germacyclohexa-2,5-diene

enThe 1(Z),4(Z)-1,5-dilithium-3R-3-methoxypenta-1,4-dienes react with diaryldichlorogermanes and dialkyldichlorogermanes to give the 1,1-diaryl- and 1,1-dialkyl-4R-4-methoxy-1-germacyclohexa-2,5-dienes, respectively.With phenyltrichlorogermane, methyl- and ethyl-trichlorogermanes the E/Z-isomeric 1-phenyl(methyl,ethyl)-1-chloro-4R-4-methoxy-1-germacyclohexa-1,3-dienes are obtained, reduction of these with LiAlH₄ makes the corresponding 1-aryl-(alkyl)-1H-4R-4-methoxy-1-germacyclohexa-2,5-dienes available.Reduction of 1-ethyl-1-chloro-4-phenyl-4-methoxy-1-germacyclohexa-2,5-diene with LiAlH₄ yields by additional ether cleavage 1-ethyl-1H-4-phenyl-1-germacyclohexa-2,4-diene.The ¹H NMR (60 MHz, 90 MHz), ¹³C NMR, IR and mass spectra are discussed, several ¹H NMR spectra are calculated according to the LAOCOONLAME program.     

The reductive dimerization of some 1,3-dienes and of 1,3,5-cycloheptatriene in the presence of trimethylchlorosilane: a DFT investigation

Treatment of 1,3-dienes and 1,3,5-cycloheptatriene by chlorotrimethylsilane in the presence of wire of lithium led mainly to reductive dimerization with formation of bis(allylsilane) derivatives. Bis-silyl compounds obtained: from 1,3-butadiene, 1,8-bis(trimethylsilyl)-2,6-octadiene (70%); from isoprene, (Z,Z)-2,7-dimethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (44%) and 2,6-dimethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (19%); from butadiene-isoprene mixture (1:1), 3-methyl-1,8-bis(trimethylsilyl)-2,6-octadiene (55%); from 2,3-dimethylbutadiene, (E,E)-2,3,6,7-tetramethyl-1,8-bis(trimethylsilyl)-2,6-octadiene (36%), from 1,3-cyclohexadiene, 4,4′-bis(trimethylsilyl)-bicyclohexyl-2,2′-diene (48%); from 1,3,5-cycloheptatriene, 1,1′-bi[(S^∗,S^∗)-6-(trimethylsilyl)cyclohepta-2,4-dien-1-yl] (53%). The structure of the various intermediates (radical anion, dianion, silylated radical, silylated anion) has been established by calculations at the B3LYP/6-311++G(d,p) level of theory with zero-point energy correction. These results are in accordance with a pathway including the formation of a radical anion, its silylation furnishing to a γ-silylated allylic radical followed by a dimerization reaction in the head to head manner.     

Cobalt-catalysed asymmetric hydrovinylation of 1,3-dienes

In the presence of bidentate 1,n-bis-diphenylphosphinoalkane-CoCl₂ complexes {Cl₂Co[P ∼ P]} and Me₃Al or methylaluminoxane, acyclic (E)-1,3-dienes react with ethylene (1 atmosphere) to give excellent yields of hydrovinylation products. The regioselectivity (1,4- or 1,2-addition) and the alkene configuration (E- or Z-) of the resulting product depend on the nature of the ligand and temperature at which the reaction is carried out. Cobalt(ii)-complexes of 1,1-diphenylphosphinomethane and similar ligands with narrow bite angles give mostly 1,2-addition, retaining the E-geometry of the original diene. Complexes of most other ligands at low temperature (–40 °C) give almost exclusively a single branched product, (Z)-3-alkylhexa-1,4-diene, which arises from a 1,4-hydrovinylation reaction. A minor product is the linear adduct, a 6-alkyl-hexa-1,4-diene, also arising from a 1,4-addition of ethylene. As the temperature is increased, a higher proportion of the major branched-1,4-adduct appears as the (E)-isomer. The unexpectedly high selectivity seen in the Co-catalysed reaction as compared to the corresponding Ni-catalysed reaction can be rationalized by invoking the intermediacy of an η⁴-[(diene)[P ∼ P]CoH]⁺-complex and its subsequent reactions. The enhanced reactivity of terminal E-1,3-dienes over the corresponding Z-dienes can also be explained on the basis of the ease of formation of this η⁴-complex in the former case. The lack of reactivity of the X₂Co(dppb) (X = Cl, Br) complexes in the presence of Zn/ZnI₂ makes the Me₃Al-mediated reaction different from the previously reported hydroalkenylation of dienes. Electron-rich phospholanes, bis-oxazolines and N-heterocyclic carbenes appear to be poor ligands for the Co(ii)-catalysed hydrovinylation of 1,3-dienes. An extensive survey of chiral ligands reveals that complexes of DIOP, BDPP and Josiphos ligands are quite effective for these reactions even at –45 °C and enantioselectivities in the range of 90–99% ee can be realized for a variety of 1,3-dienes. Cobalt(ii)-complex of an electron-deficient Josiphos ligand is especially active, requiring only <1 mol% catalyst to effect the reactions.     

A facile method for the stereoselective preparation of (1E,3E)-4-substituted-1-amino-1,3-dienes via 1,4-elimination

The 1,4-elimination reaction of 1-amino-4-methoxy-(2Z)-alkenes is shown to proceed with high (1E,3E)-stereoselectivities to afford the corresponding 4-substituted-1-amino-1,3-dienes in good yield. The scope and stereochemical features of the synthetic method are described.     

Regiospecific synthesis of symmetrical (1E,3E) 2,3-difluoro-1,4-diphenyl-buta-1,3-dienes via palladium-catalyzed cross-coupling of (Z) 2-bromo-2-fluoroethenylbenzenes in presence of bis(pinacolato)diboron

The cross-coupling reaction of (Z) 1-bromo-1-fluoroalkenes catalyzed by PdCl₂(PPh₃)₂-2PPh₃ (3%) and CsF in Tetrahydrofuran (THF) in presence of bis(pinacolato)diboron led to (1E,3E) 2,3-difluoro-1,4-disubstituted-buta-1,3-dienes in high yields.     

GeCl<Subscript>2</Subscript> cycloaddition reactions to unsaturated organic compounds taking ethylene,buta-1,3-diene,and hexa-1,3,5-triene as examples: a quantum chemical study

The cycloaddition reactions of dichlorogermylene GeCl₂ to ethylene, buta-1,3-diene, and hexa-1,3,5-triene were studied within the framework of the density functional theory (PBE and B3LYP density functionals) and by the ab initio CBS-QB3 method. The energy characteristics of the reaction of GeCl₂ with ethylene were refined and non-empirical quantum chemical calculations of reaction pathways in the GeCl₂ + buta-1,3-diene and GeCl₂ + hexa-1,3,5-triene systems were carried out for the first time. It was shown that the [2+1] cycloaddition reactions are kinetically hindered and thermodynamically unfavorable, while the [4+1] and [6+1] cycloaddition reactions are characterized by low barriers and result in thermodynamically favorable products. For the [4+1] cycloaddition to buta-1,3-diene and [6+1] cycloaddition to hexa-1,3,5-triene, the most energetically favorable reaction pathways involve a suprafacial and antarafacial approach of reactants, respectively.     

Conformational Properties of (Z,Z)-, (E,Z)-, and (E,E)-Cycloocta-1,4-dienes

Summary.  Ab initio calculations at the HF/6-31G^* level of theory for geometry optimization and the MP2/6-31G^*//HF/6-31G^* level for a single point total energy calculation are reported for (Z,Z)-, (E,Z)-, and (E,E)-cycloocta-1,4-dienes. The C ₂-symmetric twist-boat conformation of (Z,Z)-cycloocta-1,4-diene was calculated to be by 3.6 kJ·mol⁻¹ more stable than the C _S-symmetric boat-chair form; the calculated energy barrier for ring inversion of the twist-boat conformation via the C _S-symmetric boat-boat geometry is 19.1 kJ·mol⁻¹. Interconversion between twist-boat and boat-chair conformations takes place via a half-chair (C ₁) transition state which is 43.5 kJ·mol⁻¹ above the twist-boat form. The unsymmetrical twist-boat-chair conformation of (E,Z)-cycloocta-1,4-diene was calculated to be by 18.7 kJ·mol⁻¹ more stable than the unsymmetrical boat-chair form. The calculated energy barrier for the interconversion of twist-boat-chair and boat-chair is 69.5 kJ·mol⁻¹, whereas the barrier for swiveling of the trans-double bond through the bridge is 172.6 kJ·mol⁻¹. The C _S symmetric crown conformation of the parallel family of (E,E)-cycloocta-1,4-diene was calculated to be by 16.5 kJ·mol⁻¹ more stable than the C _S-symmetric boat-chair form. Interconversion of crown and boat-chair takes place via a chair (C _S) transition state which is 37.2 kJ·mol⁻¹ above the crown conformation. The axial- symmetrical twist geometry of the crossed family of (E,E)-cycloocta-1,4-diene is 5.9 kJ·mol⁻¹ less stable than the crown conformation. Corresponding author. E-mail: isayavar@yahoo.com Received March 25, 2002; accepted April 3, 2002     

Diverse reactions of 1,4-dilithio-1,3-dienes with nitriles: facile access to tricyclic Delta1-bipyrrolines, multiply substituted pyridines, siloles, and (Z,Z)-dienylsilanes by tuning of substituents on the butadienyl skeleton

Addition cyclization of 1,2,3,4-tetrasubstituted 1,4-dilithio-1,3-dienes (Type I) with four equivalents of various aromatic nitriles in the presence of hexamethylphosphoramide (HMPA) gives exclusively fully substituted pyridines in moderate to good yields. Similarly, trisubstituted pyridines can be prepared by the reaction of 2,3-dialkyl- or diaryl-substituted 1,4-dilithio-1,3-dienes (Type II) with nitriles. However, five- or six-membered-ring fused 2,3-disubstituted 1,4-dilithio-1,3-dienes (Type III) reacted with various aromatic and aliphatic nitriles without alpha-hydrogen atoms to afford tricyclic Delta1-bipyrrolines in high yields. The reaction of six-membered-ring fused 2,3-disubstituted 1,4-dilithio-1,3-diene (Type III) with 2-cyanopyridine afforded the corresponding pyridine, and no tricyclic Delta1-bipyrroline was observed. Seven-membered-ring fused dilithiodienes reacted with PhCN or trimethylacetonitrile to afford the corresponding pyridines in good yield. When 1,2,3,4-tetrasubstituted dilithio reagents (Type I) were treated with Me3SiCN, a tandem silylation/intramolecular substitution process readily occurred to yield siloles, whereas the reaction of 2,3-disubstituted dilithio reagents (Types II and III) with Me3SiCN gave rise to (Z,Z)-dienylsilanes with high stereoselectivity. These results revealed that the formation of tricyclic Delta1-bipyrrolines, pyridines, siloles, and (Z,Z)-dienylsilanes are strongly dependent on the substitution patterns of the dilithio butadienes and the nature of the nitriles employed.     

Cross-coupling of E,E-1,4-diiodobuta-1,3-diene with nucleophiles catalyzed by Pd or Ni complexes: a new route to functionalized dienes

E,E-1,4-Diiodobuta-1,3-diene can enter into cross-coupling reactions with carbon- or other element-centered nucleophiles in the presence of Pd or Ni complexes as catalysts. Convenient procedures were developed for the stereoselective synthesis of E,E-1,4-dialkenylbuta-1,3-dienes, dienyl-1,4-bisphosphonates, E,E-1,4-bis(diphenylphosphino)buta-1,3-diene, E,E-1,4-diphenylbuta-1,3-diene, and E,E-1,4-bis(thiophenyl)buta-1,3-diene.     

Fully regio- and endo-stereoselective synthesis of new polycyclic allylic sulfides via a Diels-Alder reaction. Synthetically useful transformations of these sulfides

Thermal and Lewis acid catalyzed cycloadditions of (Z)-1,2-diheterosubstituted-1,3-dienes to a variety of dienophiles are described. Both endo/exo and regioselectivity have been investigated. In all cases cycloaddition reactions exhibited full regio- and endo-stereoselectivity. The obtained cycloadducts are new polycyclic allylic sulfides carrying much structural and stereochemical informations. Work on transformation of the adducts, mainly to the corresponding new 1,3-dienes and aromatic compounds, is also presented.     

Triplet photochemistry of medium ring trienes

The photochemistry of the triplets of 10- and 11-membered ring 1,3,5-trienes has been studied. At ?70° cis,trans,cis-cyclodeca-1,3,5-triene goes only to the cis,cis,cis-isomer. At 25°, this latter compound is converted into cis-bicyclo[4.4.0]deca-2,4-diene via the thermally labile trans,cis,trans-cyclodeca-1,3,5-triene. At ?70° cis,trans,cis-cycloundeca-1,3,5-triene is converted to the cis,cis,cis-isomer. At 25°, this primary ptotochemical product undergoes a thermal 1,7-sigmatropic hydrogen migration to yield the trans,cis,cis, isomer. This latter triene upon sensitized irradiation yields cis-bicyclo[5.4.0]undeca-8,10-diene and trans-bicyclo[7.2.0]undeca-2,10-diene. The ratio of these latter two products changes with the temperature of the sensitized reaction. The possible mechanisims of these transformations are discussed.     

Hetero-Diels-Alder-Reaktion mit 1,3-Thiazol-5(4H)-thionen

Hetro-Diels-Alder Reaction with 1,3-Thiazol-5(4H)-thiones On heating in toluene to 180° and on treatment with BF₃·Et₂O in CH₂Cl₂ room temperature, 1,3-dienes react with the C?S group of 1,3-thiazol-5(4H)-thiones 1 in a reversible Diels-Alder reaction to give spiro[4.5]-heterocycles of type 6. A 1:1 mixture of two regioisomeric cycloadducts is formed in the thermal reaction with 2-methylbuta-1,3-diene (isoprene, 5b ). In contrast, the formation of one regioisomer is strongly preferred in the BF₃-catalyzed reaction. Frontier-orbital control as well as steric factors seem to be responsible for the observed regioselectivity. BF₃-Catalyzed, cyclic 1,3-dienes and 1 also undergo a smooth Diels-Alder reaction. Whereas cyclohexa-1,3-diene ( 5c ) reacts with 1a and 1b to give a single isomer (presumably the ‘exo’-adduct), cyclopenta-1,3-diene ( 5d ) leads to a ca. 3:1 mixture of ‘exo’-and ‘endo’-isomer.     

N,N-dihalophosphoramides-XV: The addition of diethyl N,N-dichlorophosphoroamidate (DCPA) to conjugated 1,3-dienes

The addition of DCPA to several conjugated 1,3-dienes has been studied. The reaction was found to proceed in dichloromethane and was spontaneously or photolytically initiated depending on the structure of the dienes. N-chloro adducts, formed upon addition, could be reduced “in situ” with sodium sulphite solution to give the corresponding diethyl N-(chloroalkenyl)posphoroamidates. Addition of DCPA to terminal double bond 1,3-dienes (butadiene, isoprene and 2,3-dimethyl-1,3-butadiene) leads regiospecifically to (E)-1,4-adducts. Similarly, 1,4-addition is also observed for 1,3-cyclohexadiene. Reaction of DCPA with nonterminal double bond 1,3-dienes (trans-piperylene, 4-methyl-1,3-pentadiene, 2,5-dimethyl-2,4-hexadiene and 1,4-diphenyl-1,3-butadiene) usually affords a mixture of adducts. Spectral data and chemical transformations pertinent to the proof of structure of DCPA addition products are presented. A possible mechanism for the addition is discussed.     

Synthesis of 1,4-disubstituted (E,Z)-1,3-dienes from lithium dicyclohexyl(trans-1-alkenyl)(1-alkynyl)borates

Treatment of lithium dicyclohexyl(trans-1-alkenyl)(1-alkynyl)borates with either boron trifluoride etherate or tri-n-butyltin chloride results in the preferential migration of the alkenyl group from boron to the adjacent alkynyl carbon atom. Protonolysis of the resultant organoboron intermediates with acetic acid affords the corresponding 1,4-disubstituted (E,Z)-1,3-dienes in good yields, provided that the (Z)-alkenyl moiety of the diene does not contain a tertiary alkyl group. Demonstration that this novel procedure is applicable for the preparation of (E,Z)-1,3-dienes containing functional groups has been shown by the synthesis in 66% yield of methyl (10E, 12Z)-hexadecadienoate, a precursor via lithium aluminium hydride reduction of the sex pheromone of the female silk moth, Bombyx mori.     

The quinones of bicyclo[3.1.0]hexatriene: A computational study of their chemistry and thermochemistry

Quinones of bicyclo[3.1.0]hexa-1,3,5-triene were examined computationally. The six compounds considered were the five possible classical and one non-classical quinone: bicyclo[3.1.0]hexa-1(6),4-diene-2,3-dione (and its monocyclic isomer with a long trans-annular bond), bicyclo[3.1.0]hexa-1(5),3-diene-2,6-dione, bicyclo[3.1.0]hexa-1,4-diene-3,6-dione (and its monocyclic isomer with a long trans-annular bond), and bicyclo[3.1.0]hexa-1(5),4-diene-2,4-dione-3,6-diyl, a non-classical (non-Kekulé) zwitterion. The two long trans-annular bond structures are akin to that found for m-benzyne. Geometries were calculated (BLYP/6-31G¹, CASSCF(2,2)/6-31G¹, MP2/6-31G¹) and electronic structural inferences were made from the geometries. Also calculated were relative energies and heats of formation (CBS-QB3), singlet and triplet energies (BLYP/6-31G¹), and ionization energies and electron affinities (HF/6-311+G⁷//BLYP/6-31G¹). The NICS(1) calculations were performed as a probe of the aromaticity of the diverse quinones.