Cell‐Derived Vesicles for Single‐Molecule Imaging of Membrane Proteins

A new approach is presented for the application of single‐molecule imaging to membrane receptors through the use of vesicles derived from cells expressing fluorescently labeled receptors. During the isolation of vesicles, receptors remain embedded in the membrane of the resultant vesicles, thus allowing these vesicles to serve as nanocontainers for single‐molecule measurements. Cell‐derived vesicles maintain the structural integrity of transmembrane receptors by keeping them in their physiological membrane. It was demonstrated that receptors isolated in these vesicles can be studied with solution‐based fluorescence correlation spectroscopy (FCS) and can be isolated on a solid substrate for single‐molecule studies. This technique was applied to determine the stoichiometry of α3β4 nicotinic receptors. The method provides the capability to extend single‐molecule studies to previously inaccessible classes of receptors.     

Make them Blink: Probes for Super‐Resolution Microscopy

In recent years, a number of approaches have emerged that enable far‐field fluorescence imaging beyond the diffraction limit of light, namely super‐resolution microscopy. These techniques are beginning to profoundly alter our abilities to look at biological structures and dynamics and are bound to spread into conventional biological laboratories. Nowadays these approaches can be divided into two categories, one based on targeted switching and readout, and the other based on stochastic switching and readout of the fluorescence information. The main prerequisite for a successful implementation of both categories is the ability to prepare the fluorescent emitters in two distinct states, a bright and a dark state. Herein, we provide an overview of recent developments in super‐resolution microscopy techniques and outline the special requirements for the fluorescent probes used. In combination with the advances in understanding the photophysics and photochemistry of single fluorophores, we demonstrate how essentially any single‐molecule compatible fluorophore can be used for super‐resolution microscopy. We present examples for super‐resolution microscopy with standard organic fluorophores, discuss factors that influence resolution and present approaches for calibration samples for super‐resolution microscopes including AFM‐based single‐molecule assembly and DNA origami.     

From Biological towards Artificial Molecular Motors

Novel single‐molecule techniques allow the observation of single‐molecular motors in real time under physiological conditions. This enables one to gain previously inaccessible information about the mechanics of molecular motors, especially their mechano‐chemical coupling. As an example, we discuss the DNA import motor of the bacteriophage ?29 and protein import into chloroplasts. In contrast to these highly developed biological molecular motors, artificial molecular motors are still at an early stage of development. Nevertheless, they already give a wealth of information. Our review focuses on how the investigation of artificial and biological molecular motors can mutually enrich each other.     

Analysis of Interactions between the Epidermal Growth Factor Receptor and Soluble Ligands on the Basis of Single‐Molecule Diffusivity in the Membrane of Living Cells

We present a single‐molecule diffusional‐mobility‐shift assay (smDIMSA) for analyzing the interactions between membrane and water‐soluble proteins in the crowded membrane of living cells. We found that ligand–receptor interactions decreased the diffusional mobility of ErbB receptors and β‐adrenergic receptors, as determined by single‐particle tracking with super‐resolution microscopy. The shift in diffusional mobility was sensitive to the size of the water‐soluble binders that ranged from a few tens of kilodaltons to several hundred kilodaltons. This technique was used to quantitatively analyze the dissociation constant and the cooperativity of antibody interactions with the epidermal growth factor receptor and its mutants. smDIMSA enables the quantitative investigation of previously undetected ligand–receptor interactions in the intact membrane of living cells on the basis of the diffusivity of single‐molecule membrane proteins without ligand labeling.     

SLAP: Small Labeling Pair for Single‐Molecule Super‐Resolution Imaging

Protein labeling with synthetic fluorescent probes is a key technology in chemical biology and biomedical research. A sensitive and efficient modular labeling approach (SLAP) was developed on the basis of a synthetic small‐molecule recognition unit (Ni‐trisNTA) and the genetically encoded minimal protein His_6‐10‐tag. High‐density protein tracing by SLAP was demonstrated. This technique allows super‐resolution fluorescence imaging and fulfills the necessary sampling criteria for single‐molecule localization‐based imaging techniques. It avoids masking by large probes, for example, antibodies, and supplies sensitive, precise, and robust size analysis of protein clusters (nanodomains).     

Tracking Surface Glycans on Live Cancer Cells with Single‐Molecule Sensitivity

Using a combination of metabolically labeled glycans, a bioorthogonal copper(I)‐catalyzed azide–alkyne cycloaddition, and the controlled bleaching of fluorescent probes conjugated to azide‐ or alkyne‐tagged glycans, a sufficiently low spatial density of dye‐labeled glycans was achieved, enabling dynamic single‐molecule tracking and super‐resolution imaging of N‐linked sialic acids and O‐linked N‐acetyl galactosamine (GalNAc) on the membrane of live cells. Analysis of the trajectories of these dye‐labeled glycans in mammary cancer cells revealed constrained diffusion of both N‐ and O‐linked glycans, which was interpreted as reflecting the mobility of the glycan rather than to be caused by transient immobilization owing to spatial inhomogeneities on the plasma membrane. Stochastic optical reconstruction microscopy (STORM) imaging revealed the structure of dynamic membrane nanotubes.     

From Valleys to Ridges: Exploring the Dynamic Energy Landscape of Single Membrane Proteins

Membrane proteins are involved in essential biological processes such as energy conversion, signal transduction, solute transport and secretion. All biological processes, also those involving membrane proteins, are steered by molecular interactions. Molecular interactions guide the folding and stability of membrane proteins, determine their assembly, switch their functional states or mediate signal transduction. The sequential steps of molecular interactions driving these processes can be described by dynamic energy landscapes. The conceptual energy landscape allows to follow the complex reaction pathways of membrane proteins while its modifications describe why and how pathways are changed. Single‐molecule force spectroscopy (SMFS) detects, quantifies and locates interactions within and between membrane proteins. SMFS helps to determine how these interactions change with temperature, point mutations, oligomerization and the functional states of membrane proteins. Applied in different modes, SMFS explores the co‐existence and population of reaction pathways in the energy landscape of the protein and thus reveals detailed insights into local mechanisms, determining its structural and functional relationships. Here we review how SMFS extracts the defining parameters of an energy landscape such as the barrier position, reaction kinetics and roughness with high precision.     

Single‐Molecule Mechanochemical Sensing Using DNA Origami Nanostructures

While single‐molecule sensing offers the ultimate detection limit, its throughput is often restricted as sensing events are carried out one at a time in most cases. 2D and 3D DNA origami nanostructures are used as expanded single‐molecule platforms in a new mechanochemical sensing strategy. As a proof of concept, six sensing probes are incorporated in a 7‐tile DNA origami nanoassembly, wherein binding of a target molecule to any of these probes leads to mechanochemical rearrangement of the origami nanostructure, which is monitored in real time by optical tweezers. Using these platforms, 10 pM platelet‐derived growth factor (PDGF) are detected within 10 minutes, while demonstrating multiplex sensing of the PDGF and a target DNA in the same solution. By tapping into the rapid development of versatile DNA origami nanostructures, this mechanochemical platform is anticipated to offer a long sought solution for single‐molecule sensing with improved throughput.     

Dual Binding of an Antibody and a Small Molecule Increases the Stability of TERRA G‐Quadruplex

In investigating the binding interactions between the human telomeric RNA (TERRA) G‐quadruplex (GQ) and its ligands, it was found that the small molecule carboxypyridostatin (cPDS) and the GQ‐selective antibody BG4 simultaneously bind the TERRA GQ. We previously showed that the overall binding affinity of BG4 for RNA GQs is not significantly affected in the presence of cPDS. However, single‐molecule mechanical unfolding experiments revealed a population (48 %) with substantially increased mechanical and thermodynamic stability. Force‐jump kinetic investigations suggested competitive binding of cPDS and BG4 to the TERRA GQ. Following this, the two bound ligands slowly rearrange, thereby leading to the minor population with increased stability. Given the relevance of G‐quadruplexes in the regulation of biological processes, we anticipate that the unprecedented conformational rearrangement observed in the TERRA‐GQ–ligand complex may inspire new strategies for the selective stabilization of G‐quadruplexes in cells.     

DCDHF Fluorophores for Single‐Molecule Imaging in Cells

There is a persistent need for small‐molecule fluorescent labels optimized for single‐molecule imaging in the cellular environment. Application of these labels comes with a set of strict requirements: strong absorption, efficient and stable emission, water solubility and membrane permeability, low background emission, and red‐shifted absorption to avoid cell autofluorescence. We have designed and characterized several fluorophores, termed “DCDHF” fluorophores, for use in live‐cell imaging based on the push–pull design: an amine donor group and a 2‐dicyanomethylene‐3‐cyano‐2,5‐dihydrofuran (DCDHF) acceptor group, separated by a π‐rich conjugated network. In general, the DCDHF fluorophores are comparatively photostable, sensitive to local environment, and their chemistries and photophysics are tunable to optimize absorption wavelength, membrane affinity, and solubility. Especially valuable are fluorophores with sophisticated photophysics for applications requiring additional facets of control, such as photoactivation. For example, we have reengineered a red‐emitting DCDHF fluorophore so that it is dark until photoactivated with a short burst of low‐intensity violet light. This molecule and its relatives provide a new class of bright photoactivatable small‐molecule fluorophores, which are needed for super‐resolution imaging schemes that require active control (here turning‐on) of single‐molecule emission.     

Molecular Basis of the Dynamic Strength of the Sialyl Lewis X—Selectin Interaction

The selectins are Ca²⁺‐dependent cell adhesion molecules that facilitate the initial attachment of leukocytes to the vascular endothelium by binding to a carbohydrate moiety as exemplified by the tetrasaccharide, sialyl Lewis X (sLeX). An important property of the selectin‐sLeX interaction is its ability to withstand the hydrodynamic force of the blood flow. Herein, we used single‐molecule dynamic force spectroscopy (DFS) to identify the molecular determinants within sLeX that give rise to the dynamic properties of the selectin/sLeX interaction. Our atomic force microscopy (AFM) measurements revealed that the unbinding of the selectin/sLeX complexes involves overcoming at least two activation barriers. The inner barrier, which determines the dynamic response of the complex at high forces, is governed by the interaction between the Fuc residue of sLeX and a Ca²⁺ ion chelated to the lectin domain of the selectin molecule, whereas the outer activation barrier can be attributed to interactions involving the sialic acid residue of sLeX. Due to their steep inner activation barriers, the selectin‐sLeX complexes are less sensitive to high pulling forces. Hence, besides its contribution to the bond energy, the Ca²⁺ ion also grants the selectin–sLeX complexes a tensile strength that is crucial for the selectin‐mediated rolling of leukocytes.     

Nanoscale organization of the pathogen receptor DC-SIGN mapped by single-molecule high-resolution fluorescence microscopy.

DC-SIGN, a C-type lectin exclusively expressed on dendritic cells (DCs), plays an important role in pathogen recognition by binding with high affinity to a large variety of microorganisms. Recent experimental evidence points to a direct relation between the function of DC-SIGN as a viral receptor and its spatial arrangement on the plasma membrane. We have investigated the nanoscale organization of fluorescently labeled DC-SIGN on intact isolated DCs by means of near-field scanning optical microscopy (NSOM) combined with single-molecule detection. Fluorescence spots of different intensity and size have been directly visualized by optical means with a spatial resolution of less than 100 nm. Intensity- and size-distribution histograms of the DC-SIGN fluorescent spots confirm that approximately 80 % of the receptors are organized in nanosized domains randomly distributed on the cell membrane. Intensity-size correlation analysis revealed remarkable heterogeneity in the molecular packing density of the domains. Furthermore, we have mapped the intermolecular organization within a dense cluster by means of sequential NSOM imaging combined with discrete single-molecule photobleaching. In this way we have determined the spatial coordinates of 13 different individual dyes, with a localization accuracy of 6 nm. Our experimental observations are all consistent with an arrangement of DC-SIGN designed to maximize its chances of binding to a wide range of microorganisms. Our data also illustrate the potential of NSOM as an ultrasensitive, high-resolution technique to probe nanometer-scale organization of molecules on the cell membrane.     

Mechanochemical Sensing: A Biomimetic Sensing Strategy

Existing biosensors employ two major components: analyte recognition and signal transduction. Although specificity is achieved through analyte recognition, sensitivity is usually enhanced through a chemical amplification stage that couples the two main units in a sensor. Although highly sensitive, the extra chemical amplification stage complicates the sensing protocol. In addition, it separates the two elements spatiotemporally, reducing the real‐time response of the biosensor. In this review, we discuss the new mechanochemical biosensors that employ mechanochemical coupling strategies to overcome these issues. By monitoring changes in the mechanical properties of a single‐molecule template upon analyte binding, single‐molecule sensitivity is reached. As chemical amplification becomes unnecessary in this single‐molecule mechanochemical sensing (SMMS) strategy, real‐time sensing is achieved.     

Photophysics of New Water‐Soluble Terrylenediimide Derivatives and Applications in Biology

The photophysical properties of three new water‐soluble terrylenediimide (WS‐TDI) derivatives are investigated and their utilization in biological experiments is demonstrated. Each of these dyes can be excited in the far red region of the visible spectrum, making them good candidates for in‐vivo studies. Single‐molecule techniques characterize their photophysics that is, the number of emitted photons, blinking characteristics and survival times until photobleaching takes place. All three dyes exhibit bright fluorescence, as well as an extremely high resistance against photodegradation compared to other well‐known fluorophores. Due to their different characteristics the three new WS‐TDI derivatives are suitable for specialized biological applications. WS‐TDI dodecyl forms non‐fluorescent aggregates in water which can be disrupted in a hydrophobic environment leading to a monomeric fluorescent form. Due to its high lipophilicity WS‐TDI dodecyl anchors efficiently in lipid bilayers with its alkyl chain and hence can be ideally used to image membranes and membrane‐containing compartments in living cells. In contrast, the positively charged WS‐TDI pyridoxy is a new type of chromophore in the WS‐TDI family. It is fully solubilized in water forming fluorescent monomers and is successfully used to label the envelope of herpes simplex viruses. Finally, it is shown that a WS‐TDI derivative functionalized with N‐hydroxysuccinimide ester moiety (WS‐TDI/NHS ester) provides a versatile reactive dye molecule for the specific labelling of amino groups in biomolecules such as DNA.     

Yoctoliter Thermometry for Single‐Molecule Investigations: A Generic Bead‐on‐a‐Tip Temperature‐Control Module

A new temperature‐jump (T‐jump) strategy avoids photo‐damage of individual molecules by focusing a low‐intensity laser on a black microparticle at the tip of a capillary. The black particle produces an efficient photothermal effect that enables a wide selection of lasers with powers in the milliwatt range to achieve a T‐jump of 65 °C within milliseconds. To measure the temperature in situ in single‐molecule experiments, the temperature‐dependent mechanical unfolding of a single DNA hairpin molecule was monitored by optical tweezers within a yoctoliter volume. Using this bead‐on‐a‐tip module and the robust single‐molecule thermometer, full thermodynamic landscapes for the unfolding of this DNA hairpin were retrieved. These approaches are likely to provide powerful tools for the microanalytical investigation of dynamic processes with a combination of T‐jump and single‐molecule techniques.     

Adsorption of Large Organic Molecules on Clean and Hydroxylated Rutile TiO2(110) Surfaces

Behavior of large organic molecules equipped with spacer groups (Violet Landers, VL) on the TiO₂(110)‐(1×1) surfaces is investigated by means of high‐resolution scanning tunneling microscopy (STM). Two distinct adsorption geometries are observed. We demonstrate that the molecule adsorption morphology can be alternated by well‐controlled STM tip‐induced manipulation. It is used to probe the mobility of molecules and reveals locking in one of the analyzed adsorption sites, thus allow to enhance or reduce the mobility along the [001] direction. Field induced hydrogen desorption is used to perform lateral STM manipulation on a hydroxyl‐free surface, which provides insight into the influence of surface hydroxyl groups on the molecule behavior. The ability to image with submolecular resolution both the central board and the spacer groups of the VL molecule is demonstrated.     

Dual‐Polarization Imaging of a Dual‐Fluorophore Ion Sensor: A Single‐Molecule Study

The fluorescence emission of the dual‐fluorophore Ca²⁺ ion sensor molecule, calcium‐green 2 (CG‐2), has been characterized using dual‐polarization imaging at the single‐molecule level. By comparing the fluorescence intensity of individual CG‐2 molecules in two mutually orthogonal polarization image channels, information about the relative orientation of the two constituent fluorophores in the molecule is obtained. Experimental results from polarization measurements are compared with those predicted from a geometric model based on coupled‐fluorophores that are randomly distributed in space. The results confirm previous optical spectroscopy‐based predictions of the orientation of CG‐2′s fluorophores, and the general applications of this dual‐polarization imaging approach for characterizing the optical properties of molecules containing multiple fluorophores is discussed.     

Loading Dynamics of a Sliding DNA Clamp

Sliding DNA clamps are loaded at a ss/dsDNA junction by a clamp loader that depends on ATP binding for clamp opening. Sequential ATP hydrolysis results in closure of the clamp so that it completely encircles and diffuses on dsDNA. We followed events during loading of an E. coli β clamp in real time by using single‐molecule FRET (smFRET). Three successive FRET states were retained for 0.3 s, 0.7 s, and 9 min: Hydrolysis of the first ATP molecule by the γ clamp loader resulted in closure of the clamp in 0.3 s, and after 0.7 s in the closed conformation, the clamp was released to diffuse on the dsDNA for at least 9 min. An additional single‐molecule polarization study revealed that the interfacial domain of the clamp rotated in plane by approximately 8° during clamp closure. The single‐molecule polarization and FRET studies thus revealed the real‐time dynamics of the ATP‐hydrolysis‐dependent 3D conformational change of the β clamp during loading at a ss/dsDNA junction.     

Motion Capture and Manipulation of a Single Synthetic Molecular Rotor by Optical Microscopy

Single‐molecule imaging and manipulation with optical microscopy have become essential methods for studying biomolecular machines; however, only few efforts have been directed towards synthetic molecular machines. Single‐molecule optical microscopy was now applied to a synthetic molecular rotor, a double‐decker porphyrin (DD). By attaching a magnetic bead (ca. 200 nm) to the DD, its rotational dynamics were captured with a time resolution of 0.5 ms. DD showed rotational diffusion with 90° steps, which is consistent with its four‐fold structural symmetry. Kinetic analysis revealed the first‐order kinetics of the 90° step with a rate constant of 2.8 s^?1. The barrier height of the rotational potential was estimated to be greater than 7.4 kJ mol^?1 at 298 K. The DD was also forcibly rotated with magnetic tweezers, and again, four stable pausing angles that are separated by 90° were observed. These results demonstrate the potency of single‐molecule optical microscopy for the elucidation of elementary properties of synthetic molecular machines.     

Unbinding Molecular Recognition Force Maps of Localized Single Receptor Molecules by Atomic Force Microscopy

Atomic force microscopy is a technique capable to study biological recognition processes at the single‐molecule level. In this work we operate the AFM in a force‐scan based mode, the jumping mode, where simultaneous topographic and tip–sample adhesion maps are acquired. This approach obtains the unbinding force between a well‐defined receptor molecule and a ligand attached to the AFM tip. The method is applied to the avidin–biotin system. In contrast with previous data, we obtain laterally resolved adhesion maps of avidin–biotin unbinding forces highly correlated with single avidin molecules in the corresponding topographic map. The scanning rate 250 pixel s^?1 (2 min for a 128×128 image) is limited by the hydrodynamic drag force. We are able to build a rupture‐force distribution histogram that corresponds to a single defined molecule. Furthermore, we find that due to the motility of the polymer used as spacer to anchor the ligand to the tip, its direction at rupture does not generally coincide with the normal to the tip–sample, this introduces an appreciable error in the measured force.