One-step synthesis of highly water-soluble magnetite colloidal nanocrystals

A high-temperature solution-phase hydrolysis approach has been developed for the synthesis of colloidal magnetite nanocrystals with well-controlled size and size distribution, high crystallinity, and high water solubility. The synthesis was accomplished by the hydrolysis and reduction of iron(III) cations in diethylene glycol with a rapidly injected solution of sodium hydroxide at an elevated temperature. The high reaction temperature allows for control over size and size distribution and yields highly crystalline products. The superior water solubility is achieved by using a polyelectrolyte, that is, poly(acrylic acid) as the capping agent, the carboxylate groups of which partially bind to the nanocrystal surface and partially extend into the surrounding water. The direct synthesis of water-soluble nanocrystals eliminates the need for additional surface modification steps which are usually required for treating hydrophobic nanocrystals produced in nonpolar solvents through the widely recognized pyrolysis route. The abundant carboxylate groups on the nanocrystal surface allow further modifications, such as bioconjugation, as demonstrated by linking cysteamine to the particle surface. The monodisperse, highly water-soluble, superparamagnetic, and biocompatible magnetite nanocrystals should find immediate important biomedical applications.     

A Nanocage for Nanomedicine: Polyhedral Oligomeric Silsesquioxane (POSS)

Ground‐breaking advances in nanomedicine (defined as the application of nanotechnology in medicine) have proposed novel therapeutics and diagnostics, which can potentially revolutionize current medical practice. Polyhedral oligomeric silsesquioxane (POSS) with a distinctive nanocage structure consisting of an inner inorganic framework of silicon and oxygen atoms, and an outer shell of organic functional groups is one of the most promising nanomaterials for medical applications. Enhanced biocompatibility and physicochemical (material bulk and surface) properties have resulted in the development of a wide range of nanocomposite POSS copolymers for biomedical applications, such as the development of biomedical devices, tissue engineering scaffolds, drug delivery systems, dental applications, and biological sensors. The application of POSS nanocomposites in combination with other nanostructures has also been investigated including silver nanoparticles and quantum dot nanocrystals. Chemical functionalization confers antimicrobial efficacy to POSS, and the use of polymer nanocomposites provides a biocompatible surface coating for quantum dot nanocrystals to enhance the efficacy of the materials for different biomedical and biotechnological applications. Interestingly, a family of POSS‐containing nanocomposite materials can be engineered either as completely non‐biodegradable materials or as biodegradable materials with tuneable degradation rates required for tissue engineering applications. These highly versatile POSS derivatives have created new horizons for the field of biomaterials research and beyond. Currently, the application of POSS‐containing polymers in various fields of nanomedicine is under intensive investigation with expectedly encouraging outcomes.

     

Synthesis and characterization of monodisperse, mesoporous, and magnetic sub-micron particles doped with a near-infrared fluorescent dye

Recently, multifunctional silica nanoparticles have been investigated extensively for their potential use in biomedical applications. We have prepared sub-micron monodisperse and stable multifunctional mesoporous silica particles with a high level of magnetization and fluorescence in the near infrared region using an one-pot synthesis technique. Commercial magnetite nanocrystals and a conjugated-NIR-dye were incorporated inside the particles during the silica condensation reaction. The particles were then coated with polyethyleneglycol to stop aggregation. X-ray diffraction, N₂ adsorption analysis, TEM, fluorescence and absorbance measurements were used to structurally characterize the particles. These mesoporous silica spheres have a large surface area (1978 m²/g) with 3.40 nm pore diameter and a high fluorescence in the near infrared region at λ=700 nm. To explore the potential of these particles for drug delivery applications, the pore accessibility to hydrophobic drugs was simulated by successfully trapping a hydrophobic ruthenium dye complex inside the particle with an estimated concentration of 3 wt%. Fluorescence imaging confirmed the presence of both NIR dye and the post-grafted ruthenium dye complex inside the particles. These particles moved at approximately 150 μm/s under the influence of a magnetic field, hence demonstrating the multifunctionality and potential for biomedical applications in targeting and imaging.     

Maghemite nanocrystal impregnation by hydrophobic surface modification of mesoporous silica

Here, we report the design of a hybrid inorganic/organic mesoporous material through simultaneous pore engineering and hydrophobic surface modification of the intramesochannels to improve the uptake of superparamagnetic maghemite nanocrystals via impregnation techniques. The mesoporous material of the SBA-15 type was functionalized in situ with thiol organo-siloxane groups. Restricting the addition of the thiol organo-siloxane to 2 mol % yielded an inorganic/organic hybrid material characterized by large pores and a well-ordered hexagonal p6mm mesophase. The hydrophobic surface modification promoted the incorporation of 7.5 nm maghemite (gamma-Fe2O3) nanocrystals, prepared through temperature-controlled decomposition of iron pentacarbonyl in organic solvents. The hydrophobic, oleic acid capped superparamagnetic maghemite nanocrystals were incorporated into the porous network via wet impregnation from organic suspensions. Combining diffraction, microscopy, and adsorption data confirmed the uptake of the nanocrystals within the intramesochannels of the silica host. Magnetization dependencies on magnetic field at different temperatures show a constriction in the loop around the origin, which indicates immobilization of maghemite nanocrystals inside the thiol-functionalized silica host.     

Simple and robust approach for passivating and functionalizing surfaces for use in complex media

Pluronic is a popular triblock copolymer used as a surfactant to introduce hydrophilic coatings onto many different types of material surfaces, from engineering to biomedical applications. Unfortunately, this is limited in its ability to resist fouling from complex media (i.e., blood) and leaves the surface hard for further modification. Herein, we report a simple, yet robust approach for passivating and functionalizing surfaces based on zwitterionic poly(carboxybetaine) (PCB) based triblock copolymer, which can be directly applied to surfaces to prevent nonspecific protein adsorption from undiluted blood plasma, and to provide additional functionalities needed for the attachment of biomolecules. Several hydrophobic surfaces including polydimethylsiloxane, silanized silica, and self-assembled monolayers are tested to demonstrate its applicability to a wide range of systems. This approach provides a robust, convenient, and effective surface modification method for real-world applications from simple surface passivation to specific targeting in complex media.     

无机半导体纳米晶光学性质的设计、调控及其生物医学应用

半导体纳米晶由于其丰富的能带结构和光学性质,在光电器件和生物医学应用等领域展现出了广阔的应用前景,且在过去的几十年中得到了广泛关注.因此,对其光学性质进行理性设计和精确调控具有重要的研究意义.本文简要综述了本研究组近年来在不同能带隙的无机半导体纳米晶的可控制备技术以及利用DNA纳米技术和蛋白质自组装手段构建具有特异光学性质的纳米结构等方面的相关研究工作,最后对这些纳米晶和纳米结构的独特光学性质及其在生物医学领域的应用研究进行了总结.     

Force-controlled inorganic crystallization lithography

Lithography plays a key role in integrated circuits, optics, information technology, biomedical applications, catalysis, and separation technologies. However, inorganic lithography techniques remain of limited utility for applications outside of the typical foci of integrated circuit manufacturing. In this communication, we have developed a novel stamping method that applies pressure on the upper surface of the stamp to regulate the dewetting process of the inorganic buffer and the evaporation rate of the solvent in this buffer between the substrate and the surface of the stamp. We focused on generating inorganic microstructures with specific locations and also on enabling the ability to pattern gradients during the crystallization of the inorganic salts. This approach utilized a combination of lithography with bottom-up growth and assembly of inorganic crystals. This work has potential applications in a variety of fields, including studying inorganic material patterning and small-scale fabrication technology.     

Functionalization of nanodiamond with epoxy monomer

A novel nanodiamond-epoxy derivative(ND-EP) was synthesized by grafting epoxy monomers onto the surface of nanodiamond(ND),and characterized by FTIR and TGA.The ratio of grafted epoxy groups was determined to be 32.5 wt% by TGA.The developed methodology provides an efficient method for the functionalization of nanodiamond material,which enables a variety of advanced engineering and biomedical applications of ND.     

Surface modulation of magnetic nanocrystals in the development of highly efficient magnetic resonance probes for intracellular labeling

High-quality biocompatible magnetic iron oxide (Fe3O4) nanocrystals were developed through a ligand exchange process of hydrophobically capped nanocrystals with hydrophilic molecules. By simple modulation of the nanocrystal surface ligand charge properties, we have been able to prepare magnetic nanocrystals with excellent intracellular labeling capabilities that efficiently label a variety of cell types without the need for additional transport facilitating agents. The excellent intracellular labeling capability of the newly developed cationic WSIO has further led to successful MRI monitoring of the migration of neural stem cells in rat spinal cord. The magnetic nanocrystals developed here have great potential in applications for labeling of various cell types and also the monitoring of cell-based medical treatments and cancer metastasis.     

Bioactivation and cell targeting of semiconductor CdSe/ZnS nanocrystals with phytochelatin-related peptides

Synthetic phytochelatin-related peptides are used as an organic coat on the surface of colloidal CdSe/ZnS semiconductor nanocrystals synthesized from hydrophobic coordinating trioctyl phosphine oxide (TOPO) solvents. The peptides are designed to bind to the nanocrystals via a C-terminal adhesive domain. This adhesive domain, composed of multiple repeats of cysteines pairs flanked by hydrophobic 3-cyclohexylalanines, is followed by a flexible hydrophilic linker domain to which various bio-affinity tags can be attached. This surface coating chemistry results in small, buffer soluble, monodisperse peptide-coated nanoparticles with high colloidal stability and ensemble photophysical properties similar to those of TOPO-coated nanocrystals. Various peptide coatings are used to modulate the nanocrystal surface properties and to bioactivate the nanoparticles. CdSe/ZnS nanocrystals coated with biotinylated peptides efficiently bind to streptavidin and are specifically targeted to GPI-anchored avidin-CD14 chimeric proteins expressed on the membranes of live HeLa cells. This peptide coating surface chemistry provides a novel approach for the production of biocompatible photoluminescent nanocrystal probes.     

3D打印生物医用材料研究进展

3D打印(亦称增材制造)技术因其独特的材料成型优势,在组织工程、航空航天、汽车制造、以及电子工业等众多领域显示出巨大的应用潜力。然而,在实际生物医学应用中,3D打印生物器件和组织器官除了要求具有复杂的结构和优异的生物学性能外,其打印结构的表面性质也需满足某些特定的要求,如3D打印组织骨架和器官必须具有生物相容性、抗菌性及细胞粘附性等。因此,将3D打印与传统表面修饰技术相结合,在不改变材料三维结构的基础上调控其表面生物化学性质,从而赋予3D打印生物骨架器官多功能化,可实现更为广泛的应用。本文以3D打印生物骨架及器官的表面修饰为主要内容对就近年来3D打印生物医用材料的最新研究进展进行了综述。     

Assembly of tobacco mosaic virus into fibrous and macroscopic bundled arrays mediated by surface aniline polymerization

One-dimensional (1D) polyaniline/tobacco mosaic virus (TMV) composite nanofibers and macroscopic bundles of such fibers were generated via a self-assembly process of TMV assisted by in-situ polymerization of polyaniline on the surface of TMV. At near-neutral reaction pH, branched polyaniline formed on the surface of TMV preventing lateral association. Therefore, long 1D nanofibers were observed with high aspect ratios and excellent processibility. At a lower pH, transmission electron microscopy (TEM) analysis revealed that initially long nanofibers were formed which resulted in bundled structures upon long-time reaction, presumably mediated by the hydrophobic interaction because of the polyaniline on the surface of TMV. In-situ time-resolved small-angle X-ray scattering study of TMV at different reaction conditions supported this mechanism. This novel strategy to assemble TMV into 1D and 3D supramolecular composites could be utilized in the fabrication of advanced materials for potential applications including electronics, optics, sensing, and biomedical engineering.     

Hydrophobic modification of cellulose nanocrystal via covalently grafting of castor oil

Hydrophobic cellulose nanocrystals (CNs) have been prepared by grafting isocyanate-terminated castor oil, a kind of natural vegetable oil, onto their surface. The existence of castor oil component in the modified cellulose nanocrystals was verified by Fourier transform infrared spectroscopy, solid-state ¹³C NMR spectra and X-ray photoelectron spectroscopy. At the same time, X-ray diffraction and transmission electron micrographs further proved that the crystalline structure and large aspect ratio of cellulose nanocrystals were essentially preserved after chemical grafting. Furthermore, the surface of modified cellulose nanocrystals appeared to be hydrophobic as indicated by contact angle measurements. The value of the polar component of surface energy decreased from 21.5 mJ/m² to almost zero via grafting castor oil. These novel hydrophobic castor oil-grafted cellulose nanocrystals appear as valuable alternatives to formulate bionanocomposites with non-polar polymers for optimized performances.     

Radial-position-controlled doping in CdS/ZnS core/shell nanocrystals

In this paper, we report a new doping approach using a three-step synthesis to make high-quality Mn-doped CdS/ZnS core/shell nanocrystals. This approach allows precise control of the Mn radial position and doping level in the core/shell nanocrystals. On the basis of this synthetic advance, we have demonstrated the first example in which optical properties of Mn-doped nanocrystals strongly depend on Mn radial positions inside the nanocrystals. In addition, we have synthesized nanocrystals with a room-temperature Mn-emission quantum yield of 56%, which is nearly twice as high as that of the best Mn-doped nanocrystals reported previously. Nanocrystals with such a high-emission quantum yield are very important to applications such as nanocrystal-based biomedical diagnosis.     

Water-soluble iron oxide nanoparticles with high stability and selective surface functionality

The water dispensability and stability of high quality iron oxide nanoparticles synthesized in organic solvents are major issues for biomedical and biological applications. In this paper, a versatile approach for preparing water-soluble iron oxide nanoparticles with great stability and selective surface functionality (-COOH, -NH(2), or -SH) was demonstrated. The hydrophobic nanoparticles were first synthesized by the thermal decomposition of an iron oleate complex in organic solvent. Subsequently, the hydrophobic coatings of nanoparticles were replaced with poly(acrylic acid) , polyethylenimine, or glutathione, yielding charged nanoparticles in aqueous solution. Two parameters were found to be critical for obtaining highly stable nanoparticle dispersions: the original coating and the surfactant-to-nanoparticle ratio. These charged nanoparticles exhibited different stabilities in biological buffers, which were directly influenced by the surface coatings. This report will provide significant practical value in exploring the biological or biomedical applications of iron oxide nanoparticles.     

Adsorption and spectroscopic characterization of lactoferrin on hydroxyapatite nanocrystals

Lactoferrin (LF), a well-characterized protein of blood plasma and milk with antioxidant, cariostatic, anticarcinogenic and anti-inflammatory properties, has been adsorbed onto biomimetic hydroxyapatite (HA) nanocrystals at two different pH values (7.4 and 9.0). The interaction was herein investigated by spectroscopic, thermal and microscopic techniques. The positive electrostatic surface potential of LF at pH 7.4 allows a strong surface interaction with the slightly negative HA nanocrystals and avoids the protein-protein interaction, leading to the formation of a coating protein monolayer. In contrast, at pH 9.0 the surface potential of LF is a mix of negative and positive zones favouring the protein-protein interaction and reducing the interaction with HA nanocrystals; as a result a double layer of coating protein was formed. These experimental findings are supported by the good fittings of the adsorption isotherms by different theoretical models according to Langmuir, Freundlich and Langmuir-Freundlich models. The nanosized HA does not appreciably affect the conformation of the adsorbed protein. In fact, using FT-Raman and FT-IR, we found that after adsorption the protein was only slightly unfolded with a small fraction of the α-helix structure being converted into turn, while the β-sheet content remained almost unchanged. The bioactive surface of HA functionalized with LF could be utilized to improve the material performance towards the biological environment for biomedical applications.     

Self‐Healing Polyester Urethane Supramolecular Elastomers Reinforced with Cellulose Nanocrystals for Biomedical Applications

Stretchable self‐healing urethane‐based biomaterials have always been crucial for biomedical applications; however, the strength is the main constraint of utilization of these healable materials. Here, a series of novel, healable, elastomeric, supramolecular polyester urethane nanocomposites of poly(1,8‐octanediol citrate) and hexamethylene diisocyanate reinforced with cellulose nanocrystals (CNCs) are introduced. Nanocomposites with various amounts of CNCs from 10 to 50 wt% are prepared using solvent casting technique followed by the evaluation of their microstructural features, mechanical properties, healability, and biocompatibility. The synthesized nanocomposites indicate significantly higher tensile modulus (approximately 36–500‐fold) in comparison to the supramolecular polymer alone. Upon exposure to heat, the materials can reheal, but nevertheless when the amount of CNC is greater than 10 wt%, the self‐healing ability of nanocomposites is deteriorated. These materials are capable of rebonding ruptured parts and fully restoring their mechanical properties. In vitro cytotoxicity test of the nanocomposites using human dermal fibroblasts confirms their good cytocompatibility. The optimized structure, self‐healing attributes, and noncytotoxicity make these nanocomposites highly promising for tissue engineering and other biomedical applications.     

Polyol合成法制备生物医药用超小粒径Fe3O4磁性纳米晶体

采用一罐polyol合成法还原Fe（Ⅲ）乙酰丙酮化合物制备了粒径可调、单分散、直径5nm以下的磁性Fe3O4纳米晶体．其晶粒表面为所用聚合物表面活性剂PVP所包覆．运用透射电镜／高分辨透射电镜、X射线衍射、振动样品磁强计和超导量子干涉仪对其结构和性能进行了表征．结果表明所制得的Fe3O4磁性纳米晶体在室温下显示出优良的超顺磁性,且结晶度高、分散性好、化学性质稳定同时表面易修饰．磁滞回线的模型分析说明该Fe3O4纳米晶粒是磁性单畴．该法制得的超顺磁Fe3O4纳米晶粒在生物和医学领域具有重要的应用价值．     

Stop-flow lithography to generate cell-laden microgel particles

Encapsulating cells within hydrogels is important for generating three-dimensional (3D) tissue constructs for drug delivery and tissue engineering. This paper describes, for the first time, the fabrication of large numbers of cell-laden microgel particles using a continuous microfluidic process called stop-flow lithography (SFL). Prepolymer solution containing cells was flowed through a microfluidic device and arrays of individual particles were repeatedly defined using pulses of UV light through a transparency mask. Unlike photolithography, SFL can be used to synthesize microgel particles continuously while maintaining control over particle size, shape and anisotropy. Therefore, SFL may become a useful tool for generating cell-laden microgels for various biomedical applications.     

Hofmeister effects of anions on self-assembled thermogels

Thermogels are temperature-responsive soft biomaterials with numerous biomedical applications. They possess high water content and can spontaneously gelate by forming non-covalent physical crosslinks between their constituent amphiphilic polymers when warmed. However, despite the ubiquity of salts in biological fluids and buffer media, the influence of salts on thermogelling polymers and the overall physical properties of the resulting hydrogels are poorly understood. Herein, we elucidate the effects of common inorganic salts on the gelation and micellization properties of a thermogelling polymer containing poly(ethylene glycol), poly(propylene glycol), and poly(caprolactone) components. The identity of the salts' anions and their concentrations was found to exhibit significant effects on the thermogel properties, in some cases being able to decrease the sol-to-gel phase transition by up to 10 °C. We demonstrate that these notable influences are likely brought about by the changes in solvation of both the polymer's hydrophobic and hydrophilic segments, as well as by direct interactions of poorly hydrated anions with the hydrophobic polymer segments. Our findings show that the effects of salts on amphiphilic thermogelling polymers are non-negligible and hence need to be taken into account for engineering and optimization of thermogel properties for different biomedical applications.