Surface modification of cotton nanocrystals with a silane agent

The research herewith aims at obtaining cellulose nanocrystals with a reduced hydrophilic surface character using a silane with isocyanate groups (isocyanatepropyltriethoxysilane), which are very reactive to hydroxyl groups and thus, are readily able to react with the low quantity of free hydroxyl groups present in the cellulose nanocrystal surfaces, therefore, promoting surface modification. Cellulose nanocrystals were obtained by hydrochloric acid hydrolysis of cotton fiber and were characterized by X-ray diffraction, Fourier transform infrared spectroscopy (FTIR) and solid state ²⁹Si nuclear magnetic resonance (NMR) and their morphologies were investigated by scanning and transmission electron microscopy techniques. The nanocrystals presented a needle-like geometry with a 10 nm approximate diameter and a 166 nm average length. FTIR, ²⁹Si NMR and silicon mapping images showed that nanocrystal surface chemical modification was successfully achieved. Also, the results confirm that the chemical modification occurred mainly at the nanocrystal surface, keeping the morphological integrity of the nanocrystals. The applied methodology for surface modification of the cellulose nanocrystals provided nanofillers with more appropriate surface characteristics that allow the dispersion in polymeric matrices and the adhesion at filler-matrix interface to be obtained. This may result in a better performance of these nanocrystals as reinforcing agents of hydrophobic polymer matrices.     

One-pot preparation of hydrophobic cellulose nanocrystals in an ionic liquid

The facile one-pot preparation of hydrophobic cellulose nanocrystals (CNCs) from wood pulpboard in an ionic liquid is reported in the present paper. This process employed a so-called amorphous cellulose solvent system capable of dissolving the majority of the amorphous regions in cellulose while maintaining the crystalline domains essentially intact, and consisting of tetrabutylammonium acetate with dimethylacetamide. These solvents were mixed at a mass ratio of 1:9 in conjunction with acetic anhydride to prepare CNCs via surface acetylation. The rod-like morphology and nanometer-scale dimensions of the resulting CNCs were ascertained by atomic force microscopy and transmission electron microscopy. Successful surface acetylation while maintaining an intact crystalline core was confirmed by Fourier transform infrared, ¹³C CP/MAS NMR and X-ray photoelectron spectroscopy in addition to X-ray diffraction. Finally, the thermal stability and hydrophobic behavior of the hydrophobic CNCs were characterized using thermal gravimetric analysis and water contact-angle measurements, respectively.     

Highly transparent nancomposite films based on polybutylmethacrylate and functionalized cellulose nanocrystals

Efficient surface functionalization of cellulose nanocrystals (CNC) with hydroxyl butyl acrylate monomer (HBA) was carried on under mild condition using N,N′-carbonyldiimidazole as an activator. The grafting of the acrylic monomer was shown to bring about the high yield grafting of polymer chains on the functionalized CNC during in situ polymerization process. Surface functionalization of CNC with HBA and the polymer grafting on the modified CNC were confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Nanocomposite film prepared from in situ polybutylmethacrylate polymerization process using HBA functionalized nanocrystals exhibited high transparency degree here assigned to improved dispersion. DMA analysis proved that the best mechanical/rheological performance is obtained for HBA–CNC contents of 4 %.     

Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces

The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (theta e>90 degrees ) by castor oil.     

Cellulose surface grafting with polycaprolactone by heterogeneous click-chemistry

This work deals with a new approach of grafting cellulose surface fibres by polycaprolactone macromolecular chains in heterogeneous conditions via click-chemistry. Thus, cellulose esters were prepared by reacting Avicel with undecynoic acid, in order to prepare cellulose substrate bearing multiple CC-terminated hairs. The prepared modified Avicel substrates were characterised by FTIR, XPS spectroscopy, elemental analyses and showed that the grafting have indeed occurred. The degree of substitution of the prepared cellulose esters was around 0.1. In parallel, polycaprolactone-diol (PCL) was converted to azido-derivative and the ensuing products characterised by FTIR and ¹³C-NMR spectroscopy. Both methods confirmed the success of such modification. Finally, cellulose esters were reacted with azido-PCL grafts in heterogeneous conditions through “click chemistry”. The thus prepared modified cellulose substrates were characterized by FTIR and XPS spectroscopy as well as elemental analyses. The three techniques confirmed the occurrence of the grafting. A weight gain of 20% was achieved.     

Topochemistry of cellulose nanofibers resulting from molecular and polymer grafting

The aim of this study was to synthesize hydrophobic cellulose nanofibers (CNFs) using different chemical treatments including polymer and molecular grafting. For polymer grafting, immobilizing poly (butyl acrylate) (PBA) and poly (methyl methacrylate) (PMMA) on CNFs were implemented by the free radical method. Also, acetyl groups were introduced directly onto the CNFs surface by acetic anhydride for molecular grafting. The gravimetric and X-ray photoelectron spectroscopy analysis showed the high grafting density of PMMA on the surface of CNFs. AFM results revealed that molecular grafting created non-uniformity on the CNFs surface, as compared to polymer brushes. In addition, thermodynamic work of adhesion and work of cohesion for the modified CNFs were reduced in water and diiodomethane solvents. Dispersion factor was studied to indicate the dispersibility of CNFs in polar and non-polar media. Dispersion energy was reduced after modification as a result of decreasing interfacial tension and the dispersibility of modified CNFs was improved in diiodomethane.     

Dendronized Cellulose Nanocrystals as Templates for Preparation of ZnS and CdS Quantum Dots

Cellulose nanocrystals (CNC) isolated from bleached bagasse pulp were modified with a second-generation isocyanate dendron (G2-dendron) to prepare dendronized cellulose nanocrystals (DCN). Transmission electron microscopy (TEM), elemental analysis for nitrogen, Fourier transform infrared (FTIR) and ¹³C magic angle spinning nuclear magnetic resonance (¹³C MAS NMR) proved occurrence of the modification of cellulose nanocrystals surfaces. The dendronized cellulose nanocrystals were used as templates for formation of ZnS and CdS quantum dots with uniform diameter at low temperature in water. The prepared DCN/QDs were highly soluble in water. TEM images showed that the size of the prepared quantum dots was about 5 nm in diameter. UV-Visible and fluorescence spectroscopy showed absorption and emission at wavelength values lower than that reported for bulk ZnS and CdS.     

Tailoring the Chemical Structure of Cellulose Nanocrystals by Amine Functionalization

The surface functionalization of cellulose nanocrystals is presently considered a useful and straightforward tool for accessing very reliable biocompatible and biodegradable nanostructures with tailored physical and chemical properties. However, to date the fine characterization of the chemical appendages introduced onto cellulose nanocrystals remains a challenge, due to the low sensitivity displayed by the most common techniques towards surface functionalization. In this paper, we demonstrate the easy functionalization of cellulose nanocrystals with aliphatic and aromatic amines, demonstrating the tunability of their properties in dependence on the selected functionality. Then, we apply to colloidal suspensions of modified nanocrystals ¹H NMR analysis to elucidate their surface structure. To the best of our knowledge, this is the first report where such investigation was performed on cellulose nanocrystals presenting both surface and reducing end modification. These results involve interesting implications for the fields of cultural heritage and of materials chemistry.     

Surface modification of cellulose with plant triglycerides for hydrophobicity

Hydrophobic cotton was achieved by surface modification of the cellulose with triglycerides from several plant oils including soybean, rapeseed, olive and coconut oils. These oils were delivered to the cellulose substrates in homogeneous solutions of ethanol or acetone as well as aqueous emulsions. Surface modification was facilitated by solvent evaporation followed by heating between 110 and 120 °C for 60 min. All oils, except for coconut, produced hydrophobic and less water-absorbing cotton, supporting the desirable role of higher unsaturation in the fatty acids to achieve crosslinked network. The most hydrophobic surfaces were obtained by the reaction with 1% soybean oil in acetone. On both bleached and scoured cotton, a water contact angle of 80° and water absorption value of 0.82 μL/mg were achieved. The acquired hydrophobicity was not only retained after water washing but also improved with subsequent exposures to elevated temperatures. The surface tension of scoured cotton cellulose was lowered from 63.81 mJ/m² to 25.74 mJ/m² when modified by soybean oil delivered in acetone, which is lower than that of poly(ethylene terephthalate). An aqueous emulsion of soybean oil also rendered the scoured cotton hydrophobic, which shows promise for a green chemistry and bio-based approach to achieve water repellency on cellulosic materials.     

Cellulose Filter Paper with Antibacterial Activity from Surface-Initiated ATRP

Poly(tert-butyl acrylate) (PtBA) bruhes were successfully grafted on the cellulose filter papers via surface-initiated atom transfer radical polymerization (ATRP). Then the grafting PtBA brushes were transferred into poly(acrylic acid) (PAA) in the presence of trifluoroactic acid (TFA), which can form chelate complexes with Ag⁺. The Ag⁺ was reduced in situ to obtain the silver nanoparticles decorated cellulose filter papers. Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) were used to characterize the chemical structure of the resulting product. The morphologies of the filter paper at different stages of surface modification were investigated by field emission scanning electron microscopy (FESEM). The silver nanoparticles decorated filter paper performed good antibacterial ability against E. coli as compared with the original filter paper and PAA modified filter paper.     

Cellulose and chitin nanomaterials for capturing silver ions (Ag+) from water via surface adsorption

The study explores the potential of cellulose nanocrystals (CNC), cellulose nanofibers (CNF) and chitin nanocrystals (ChNC) isolated from bioresidues to remove silver ions from contaminated water. Zeta sizer studies showed negatively charged surfaces for CNC and CNF isolated from cellulose sludge in the acidic and alkaline pHs, whereas ChNC isolated from crab shell residue showed either positive or negative charges depending on pH conditions. Model water containing silver ions showed a decrease in Ag⁺ ion concentration (measured by inductively coupled plasma-optical emission spectrometer; inductively coupled plasma mass spectrometry), after treatment with CNC, CNF and ChNC suspensions. The highest Ag⁺ ion removal was measured near neutral pH for CNC, being 34.4 mg/g, corresponding to 64 % removal. ChNC showed 37 % and CNF showed 27 % removal of silver ions. The WDX (wavelength dispersive X-ray analysis) and XPS (X-ray photoelectron spectroscopy) analysis confirmed the presence of silver ions on the surface of the nanocellulose and nanochitin after adsorption. Surface adsorption on the nanoparticles via electrostatic interactions is considered to be the prominent mechanism of heavy metal ion capture from aqueous medium, with CNC with negative surface charge and negatively charged functional groups being most favourable for the adsorption of positively charged Ag⁺ ions compared to other native bionanomaterials.     

Chemical modification of methyl cellulose with HMDI to modulate the thickening properties in castor oil

This work deals with the selective incorporation of reactive isocyanate groups into methyl cellulose in order to be used as reactive thickening agent in castor oil. Resulting gel-like dispersions may have potential applications as green lubricating greases formulated from renewable resources. Two different isocyanate-functionalized methyl cellulose-based polymers were obtained by reaction of methyl cellulose with 1,6-hexamethylene diisocyanate. The functionalization degree, from fully functionalized to a certain number of free hydroxyl groups (58:36:6 ratio between –OMe, –NCO and free –OH groups), was controlled by modifying the reagents molar ratio. These polymers were characterized through nuclear magnetic resonance of protons (¹H-NMR), Fourier transform infrared spectroscopy and thermogravimetric analysis (TGA). Thermal and rheological responses of oleogels prepared by dispersing these polymers in castor oil were studied by means of TGA analysis and small-amplitude oscillatory shear measurements. The evolution of linear viscoelasticity functions with frequency of the oleogel containing isocyanate-functionalized methyl cellulose with lower –NCO content is quite similar to that found for traditional lithium lubricating greases. In relation to long-term stability of these oleogels, the values of viscoelastic functions significantly increase during the first 7 days of ageing and then remain almost constant.     

Hydrophobically modified polyelectrolytes used as reducing and stabilizing agent for the formation of gold nanoparticles

This paper is focused on the synthesis and characterization of hydrophobically modified polyelectrolytes and their use as reducing as well as stabilizing agents for the formation of gold nanoparticles. Commercially available poly(acrylic acid) has been hydrophobically modified with various degrees of grafting of butylamine introduced randomly along the chain. Different analytical methods are performed, i.e., IR and ¹H-NMR spectroscopy in combination with elemental analysis to determine the degree of grafting. The modified polymers can successfully be used for the controlled single-step synthesis and stabilization of gold nanoparticles. The process of nanoparticle formation is investigated by means of UV-vis spectroscopy. The size and shape of the particles obtained in the presence of unmodified or modified polyelectrolytes are characterized by dynamic light scattering, zeta potential measurements and transmission electron microscopy. The polyelectrolytes were involved in the crystallization process of the nanoparticles, and in the presence of hydrophobic microdomains at the particle surface, a better stabilization at higher temperature can be observed.     

Thermal decomposition of ammonium perchlorate activated via addition of NiO nanocrystals

This work reported on the thermal decomposition of ammonium perchlorate activated by addition of NiO nanocrystals with different surface areas. NiO samples were characterized by X-ray diffraction (XRD), transition electron microscope (TEM), Brunauer-Emmett-Teller (BET) technique, Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy. With increasing annealing temperature, the surface areas of NiO samples reduced from 108.6 to 0.9 m² g⁻¹. The catalytic activities of NiO nanocrystals on the thermal decomposition of ammonium perchlorate were investigated by thermogravimetric analysis (TG) coupled with differential thermal analysis (DTA). With addition of NiO nanocrystals, thermal decomposition temperature of AP decreased greatly. Larger surface areas of NiO nanocrystals promoted the thermal decomposition of AP.     

Castor oil modified by epoxidation,transesterification, and acrylation processes: Spectroscopic characteristics

In the present study, castor oil (CO) was modified by epoxidation, transesterification, and acrylation processes. In situ epoxidation method was used to prepare epoxidized castor oil (ECO) in acetic acid with hydrogen peroxide in the presence of Seralite SRC-120 catalyst. Transesterified epoxidized castor oil was synthesized from the reaction of methanol in the presence of sodium methoxide catalyst. The acrylated epoxidized castor oil was synthesized from the reaction of ECO with acrylic acid containing hydroquinone. Chemical structures of modified CO were analyzed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectra analysis.     

Poly(lactic acid)-based biocomposites reinforced with modified cellulose nanocrystals

This work investigates reinforcing poly(lactic acid) (PLA) nanocomposites using triazine derivative-grafted cellulose nanocrystals (CNCs). A hydrophobic triazine derivative was synthesized and applied to modify CNCs to improve their thermal stability and diminish the hydrophilicity of the nanoparticles. CNCs before and after modification were used to reinforce PLA nanocomposites by a hot compression process. The results of thermogravimetric analysis indicated that the initial thermal decomposition temperature of modified nanocrystals was improved by approximately 100 °C compared to the original CNCs. That is, the thermal stability of modified cellulose nanocrystals was improved due to the shielding effect of CNCs by a hydrophobic aliphatic amine layer on the surface of the nanoparticles. The results of dynamic contact angle measurements revealed a decrease of hydrophilicity of the modified CNCs. The results from scanning electron microscopy and a UV–Vis spectrophotometer revealed that the compatibility between the modified nanocrystals and the PLA was improved. Finally, the results of tensile tests indicated a significant improvement in terms of breaking strength and elongation at the break point.     

Preparation,Characterization and Properties of Cellulose Acetate-Grafted-Poly(glycidyl methacrylate) Copolymers

The cellulose acetate-grafted-poly(glycidyl methacrylate) copolymers were synthesized successfully by free radical polymerization. The resulting copolymer was characterized by proton nuclear magnetic resonance (¹H-NMR), solid-state ¹³C-NMR, Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). The crystallization behavior, thermal properties, specific particle surface area, moisture sorption behavior of the modified cellulose acetate were investigated by wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) method and Dynamic Vapor Sorption (DVS) instrument. It was found that the poly(glycidyl methacrylate) (PGMA) grafting was effective in improving the water adsorption of cellulose acetate (CA) changing the specific surface area, and reducing the T_g of copolymers.     

Covalent functionalization of solid cellulose by divergent synthesis of chemically active dendrons

Covalent surface modification of solid cellulose with well‐defined and chemically reactive dendrons is introduced as a platform for cellulose grafting with functional materials. Surface functionalization with a first generation dendron is achieved by esterification employing bifunctional molecules based on 2,2‐bis(hydroxymethyl) propionic acid (bis‐MPA) under mild conditions and short reaction times. The activated cellulose surface displays hydrophobic properties and contains two reactive alkene end‐groups per graft, which are used for covalent binding to active agents, as demonstrated by selective functionalization of the modified cellulose with fluorescent dye via photopatterning. The number of active end‐groups on the surface of cellulose is multiplied by divergent solid‐state synthesis of second and third generation dendrons having four and eight reactive sites per dendron, respectively. The dendrons are assembled in only few hours by a sequence of thiol‐ene/esterification reactions. The ability to accurately control the number of binding sites on the surface of cellulose allows fine tuning of the surface properties, as shown by the attachment of hydrophobic small molecules to the dendronized cellulose. The first, second and third generation dendrons allow preparing surfaces with increasing hydrophobicities; second and third generation dendrons functionalized with small perfluoroalkyl molecule display superhydrophobic properties. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2103–2114     

Preparation and Antibacterial Function of Quaternary Ammonium Salts Grafted Cellulose Fiber Initiated by Fe2 +-H2O2 Redox

The surface contact disinfecting technique is a newly developed method for water sterilization. In this paper, the grafted quaternary ammonium salts (QAS) antibacterial fibers were prepared and designed to apply for the surface contact disinfecting process in water treatment. The antibacterial fibers were directly prepared by grafting methacryloxylethyl benzyl dimethyl ammonium chloride (DMAE-BC) onto cellulose fiber using thiocarbonate-H₂O₂ redox system. All kinds of factors in the grafting reactions, such as reaction time, reaction temperature, monomer concentration, initiator concentration, which influence the percentage of grafting, were studied and optimized. The modified cellulose fibers were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope(SEM). The effects of the percentage of grafting of the grafted cellulose fibers on bactericidal activity were also studied. The spread plate method was used to characterize the bactericidal activity. The disinfection process was further investigated by directly observing the morphology of the bacterial cells adsorbed on the antibacterial fibers with SEM and measuring extracelluar total protein concentration in suspension. The poly(DMAE-BC)-grafted cellulose ?ber was found to exhibit particularly high activity against E.coli.     

Chemical surface modifications of microfibrillated cellulose

Microfibrillated cellulose (MFC) was prepared by disintegration of bleached softwood sulphite pulp through mechanical homogenization. The surface of the MFC was modified using different chemical treatments, using reactions both in aqueous- and organic solvents. The modified MFC was characterized with fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Epoxy functionality was introduced onto the MFC surface by oxidation with cerium (IV) followed by grafting of glycidyl methacrylate. The length of the polymer chains could be varied by regulating the amount of glycidyl methacrylate added. Positive charge was introduced to the MFC surface through grafting of hexamethylene diisocyanate, followed by reaction with the amines. Succinic and maleic acid groups could be introduced directly onto the MFC surface as a monolayer by a reaction between the corresponding anhydrides and the surface hydroxyl groups of the MFC.