Description of the ground-state covalencies of the bis(dithiolato) transition-metal complexes from X-ray absorption spectroscopy and time-dependent density-functional calculations

The electronic structures of [M(L(Bu))(2)](-) (L(Bu)=3,5-di-tert-butyl-1,2-benzenedithiol; M=Ni, Pd, Pt, Cu, Co, Au) complexes and their electrochemically generated oxidized and reduced forms have been investigated by using sulfur K-edge as well as metal K- and L-edge X-ray absorption spectroscopy. The electronic structure content of the sulfur K-edge spectra was determined through detailed comparison of experimental and theoretically calculated spectra. The calculations were based on a new simplified scheme based on quasi-relativistic time-dependent density functional theory (TD-DFT) and proved to be successful in the interpretation of the experimental data. It is shown that dithiolene ligands act as noninnocent ligands that are readily oxidized to the dithiosemiquinonate(-) forms. The extent of electron transfer strongly depends on the effective nuclear charge of the central metal, which in turn is influenced by its formal oxidation state, its position in the periodic table, and scalar relativistic effects for the heavier metals. Thus, the complexes [M(L(Bu))(2)](-) (M=Ni, Pd, Pt) and [Au(L(Bu))(2)] are best described as delocalized class III mixed-valence ligand radicals bound to low-spin d(8) central metal ions while [M(L(Bu))(2)](-) (M=Cu, Au) and [M(L(Bu))(2)](2-) (M=Ni, Pd, Pt) contain completely reduced dithiolato(2-) ligands. The case of [Co(L(Bu))(2)](-) remains ambiguous. On the methodological side, the calculation led to the new result that the transition dipole moment integral is noticeably different for S(1s)-->valence-pi versus S(1s)-->valence-sigma transitions, which is explained on the basis of the differences in radial distortion that accompany chemical bond formation. This is of importance in determining experimental covalencies for complexes with highly covalent metal-sulfur bonds from ligand K-edge absorption spectroscopy.     

Synthesis and characterisation of nu3-octahedral [Ni36Pd8(CO)48]6- and [Ni35Pt9(CO)48]6- clusters displaying unexpected surface segregation of Pt atoms and molecular and/or crystal substitutional Ni/Pd and Ni/Pt disorder

The synthesis and structure, as well as the chemical and electrochemical characterisation of two new nu(3)-octahedral bimetallic clusters with the general [Ni(44-x)M(x)(CO)(48)](6-) (M = Pd, x = 8; M = Pt, x = 9) formula is reported. The [Ni(35)Pt(9)(CO)(48)](6-) cluster was obtained in reasonable yields (56 % based on Pt) by reaction of [Ni(6)(CO)(12)](2-) with 1.1 equivalents of Pt(II) complexes, in ethyl acetate or THF as the solvent. The [Ni(36)Pd(8)(CO)(48)](6-) cluster was obtained from the related reaction with Pd(II) salts in THF, and was isolated only in low yields (5-10 % based on Pd), mainly because of insufficient differential solubility of its salts. The unit cell of the [NBu(4)](6)[Ni(35)Pt(9)(CO)(48)] salt contains a substitutionally Ni-Pt disordered [Ni(24)(Ni(14-x)Pt(x))Pt(6)(CO)(48)](6-) (x = 3) hexaanion. A combination of crystal and molecular disorder is necessary to explain the disordering observed for the Ni/Pt sites. The unit cell of the corresponding [Ni(36)Pd(8)(CO)(48)](6-) salt contains two independent [Ni(30)(Ni(8-x)Pd(x))Pd(6)(CO)(48)](6-) (x = 2) hexaanions. The two display similar substitutional Ni-Pd disorder, which probably arises only from crystal disorder. The structure of [Ni(36)Pd(8)(CO)(48)](6-) establishes the first similarity between the chemistry of Ni-Pd and Ni-Pt carbonyl clusters. A comparison of the chemical and electrochemical properties of [Ni(35)Pt(9)(CO)(48)](6-) with those of the related [Ni(38)Pt(6)(CO)(48)](6-) cluster shows that surface colouring of the latter with Pt atoms decreases redox as well as protonation propensity of the cluster. In contrast, substitution of all internal Pt and two surface Ni with Pd atoms preserves the protonation behaviour and is only detrimental with respect to its redox aptitude. A qualitative rationalisation of the different surface-site selectivity of Pt and Pd, based on distinctive interplays of M--M and M--CO bond energies, is suggested.     

Divergent Behavior in the Chemistry of Metal-Bis(dithiolene) Complexes Appended with Peripheral Aliphatic Butyl Chains

Metal-bis(dithiolene) complexes derived from Ni(II), Co(II), Pd(II), Pt(II) and Au(III), bearing butyl aliphatic chains have been synthesized, and fully characterized by a variety of spectroscopic techniques including NMR, UV-vis, IR, HRMS, CV, and X-ray diffraction studies. This comparative study made possible to establish that the Co(II) species appear to be dimeric in the solid state as well as in solution. On the other hand, the coordination complexes based on Ni(II), Pd(II), Pt(II) and Au(III), feature a monomeric structure in both solution and solid state. These metal-bis(dithiolene) complexes are remarkably stable in solution and, in stark contrast to precedents in the literature, they retain their square planar geometry even in presence of pyridine derivatives reported for their apical binding on metal-bis(dithiolene) complexes.     

Diverse reactivities of aromaticity-unsaturation coexisted metalladithiolene rings

This review paper summarizes the reactivities of metal dithiolene complexes based on the ‘coexistence of aromaticity and unsaturation’ in the five-membered metallacycle, the so-called metalladithiolene ring (MS₂C₂). The 16-electron [LM(dithiolene)] (LM = CpM^III, Cp*M^III, (C₆R₆)M^II) complexes are coordinatively unsaturated and usually show M-S centered cycloaddition reactions with nucleophiles (e.g. diazoalkanes, organic azides, quadricyclane) and electrophiles (e.g. tetracyanoethylene oxide, activated acetylene). The resulting metalladithiolene cycloadducts, which have three-membered M-S-C or M-S-N rings, further react with protic acids or PR₃ to undergo the ring-opening reactions involving the M-C bond, M-S bond or M-N bond cleavages. Furthermore, diverse adduct dissociations are observed by thermal, photochemical or electrochemical redox reactions. Such reactions normally produce the original [LM(dithiolene)] complexes (non-adduct) and the eliminated fragments. Among them, the Co-S centered imido adduct [CpCo(dithiolene)(NR)] (R = Ts, Ms) reacted under thermal conditions in the presence of PR₃ to undergo the intramolecular imido migration reaction to the Cp ligand, giving [(C₅H₄-NHR)Co(dithiolene)] complexes. The M-S centered multinuclear cluster complexes are obtained by the reaction of [LM(dithiolene)] with low valent M(CO)_n complexes. The square-planar bis(dithiolene) complexes [M(dithiolene)₂]⁰ (M = Ni, Pd, Pt) or tris(dithiolene) complexes [M(dithiolene)₃]⁰ yield cycloaddition products with olefins. These reactions are due to ligand centered reactions made possible by a molecular orbital overlap between dithiolene LUMO and olefin HOMO. Similar ligand centered adducts are obtained by the reaction of dianionic [M(dithiolene)₂]²⁻ with haloalkanes or dihaloalkanes. Also these adducts of bis(dithiolene) complex are dissociated photochemically and electrochemically. This paper also describes the reactivities of organometallic o-carborane dithiolate complexes, which are generally formulated as [LM(S₂C₂B₁₀H₁₀)] (LM = CpCo, Cp*Rh, Cp*Ir, (p-cymene)Ru and (p-cymene)Os). Diverse addition reactions are reported; in particular, the reaction with acetylene involves B-H bond activation in the carborane moiety.     

Acetylenedithiolate: alkyne complex formation renders it a dithiolate chelate ligand

The isostructural complexes [{Tp'W(CO)(2)(eta(2)-C(2)S(2))}(2)M] (M = Ni, Pd, Pt) show that the eta(2)-C,C'-alkyne complexes of acetylenedithiolate at [Tp'W(CO)(2)](+) can generally act as dithiolate chelate ligands, leading to dithiolene type complexes.     

Bis(isothiocyanato)bis(phosphine) complexes of group 10 metals: reactivity toward organic isocyanides

Treatment of Ni(NCS)2(PMe2Ph)2 with organic isocyanides CN-R gave five-coordinate isocyanide Ni(II) complexes, Ni(CN-R)(NCS)2(PMe2Ph)2 (R = C6H3-2,6-Me2 (1), t-Bu (2)). Interestingly, the corresponding reaction of Ni(NCS)2(P(n-Pr)3)2 with 2 equiv. of CN-t-Bu gave an unusual compound, which exists as an ion pair of the trigonal bipyramidal cation [Ni(P(n-Pr)3)2(CN-t-Bu)3]2+ (3) and the dinuclear NCS-bridged anion [Ni(1,3-micro-NCS)(NCS)3]2(2-) (4). In contrast, Pd(NCS)2(P(n-Pr)3)2 underwent substitution with 2 equiv. of CN-t-Bu to give the four-coordinate mono(isocyanide) Pd(II) complex Pd(NCS)(SCN)(CN-t-Bu)(P(n-Pr)3) (5) via phosphine dissociation. Reactions of M(NCS)2L2 (M = Pd, Pt; L = PMe3, PEt3, PMePh2, P(n-Pr)3) with two equiv. of CN-R (R = t-Bu, i-Pr, C6H3-2,6-Me2) gave the corresponding bis(isocyanide) complexes [M(CN-R)2(PR3)2](SCN)2 (7-13), except for Pd(NCS)2(PEt3)2 that reacted with CN-R' (R' = i-Pr, C6H3-2,6-Me2) and produced the mono(isocyanide) Pd(II) complexes [Pd(CN-R')(SCN)(PEt3)2](SCN) (14 and 15). Finally, treatment of M(NCS)2(PMe3)2 (M = Ni, Pd, Pt) with sterically bulky isocyanide CN-C6H3-2,6-i-Pr2 gave various products, (16-18) depending on the identity of the metal.     

Metal Complexes of Dithiolate Ligands: 5,6-Dihydro-1,4-dithiin-2,3-dithiolato (dddt(2-)), 5,7-Dihydro-1,4,6-trithiin-2,3-dithiolato (dtdt(2-)), and 2-Thioxo-1,3-dithiole-4,5-dithiolato (dmit(2-)). Synthesis, Electrochemical Studies, Crystal and Electronic Structures, and Conducting Properties

New precursors to potentially conductive noninteger oxidation state (NIOS) compounds based on metal complexes [ML(2)](n)()(-) [M = Ni, Pd, Pt; L = 5,6-dihydro-1,4-dithiin-2,3-dithiolato (dddt(2)(-)), 5,7-dihydro-1,4,6-trithiin-2,3-dithiolato (dtdt(2)(-)), and 2-thioxo-1,3-dithiole-4,5-dithiolato (dmit(2)(-)); n = 2, 1, 0] have been investigated. Complexes of the series (NR(4))[ML(2)] (R = Me, Et, Bu; L = dddt(2)(-), dtdt(2)(-)) have been isolated and characterized, and the crystal structure of (NBu(4))[Pt(dtdt)(2)] (1) has been determined {1 = C(24)H(44)NPtS(10), a = 12.064(2) ?, b = 17.201(3) ?, c = 16.878(2) ?, beta = 102.22(2) degrees, V = 3423(1) ?(3), monoclinic, P2(1)/n, Z = 4}. Oxidation of these complexes affords the corresponding neutral species [ML(2)](0). Another series of general formula (cation)(n)()[M(dmit)(2)] [cation = PPN(+), BTP(+), and (SMe(y)()Et(3)(-)(y)())(+) with y = 0, 1, 2, and 3, n = 2, 1, M = Ni, Pd] has also been studied. All of these (cation)(n)()[M(dmit)(2)] complexes have been isolated and characterized [with the exception of (cation)[Pd(dmit)(2)] for cation = (SMe(y)()Et(3)(-)(y)())(+)]. The crystal structures of (PPN)[Ni(dmit)(2)].(CH(3))(2)CO (2) and (SMeEt(2))[Ni(dmit)(2)] (3) have been determined {2 = C(45)H(36)NNiS(10)P(2)O, a = 12.310(2) ?, b = 13.328(3) ?, c = 15.850(3) ?, alpha = 108.19(3) degrees, beta = 96.64(2) degrees, gamma = 99.67(2) degrees, V = 2373(1) ?(3), triclinic, P&onemacr;, Z = 2; 3 = C(11)H(13)NiS(11), a = 7.171(9) ?, b = 17.802(3) ?, c = 16.251(3) ?, beta = 94.39(4) degrees, V = 2068(2) ?(3), monoclinic, P2(1)/n, Z = 4} NIOS salts derived from the preceding precursors were obtained by electrochemical oxidation. Electrochemical studies of the [M(dddt)(2)] complexes show that they may be used for the preparation of NIOS radical cation salts and [M(dddt)(2)][M'(dmit)(2)](x)() compounds, but not for the preparation of (cation)[M(dddt)(2)](z)() NIOS radical anion salts. The electrochemical oxidation of the [M(dtdt)(2)](-) complexes always yields the neutral [M(dtdt)(2)](0) species. The crystal structure of [Pt(dddt)(2)][Ni(dmit)(2)](2) (4) has been determined and is consistent with the low compaction powder conductivity (5 x 10(-)(5) S cm(-)(1) at room temperature) {4 = C(20)H(8)Ni(2)PtS(28), a = 20.336(4) ?, b = 7.189(2) ?, c = 14.181(2) ?, beta = 97.16(2) degrees, V = 2057(1) ?(3), monoclinic, C2/m, Z = 2}. The crystal structures of the semiconducting NIOS compounds (BTP)[Ni(dmit)(2)](3) (5) and (SMe(3))[Ni(dmit)(2)](2) (6) have been determined {5 = C(43)H(22)PNi(3)S(30), a = 11.927(2) ?, b = 24.919(2) ?, c = 11.829(3) ?, alpha = 93.11(1) degrees, beta = 110.22(1) degrees, gamma = 83.94(1) degrees, V = 3284(1) ?(3), triclinic, P&onemacr;, Z = 2; 6 = C(15)H(9)Ni(2)S(21), a = 7.882(1) ?, b = 11.603(2) ?, c = 17.731(2) ?, alpha = 77.44(1) degrees, beta = 94.39(1) degrees, gamma = 81.27(1) degrees, V = 1563(1) ?(3), triclinic, P&onemacr;, Z = 2}. The parent compound (SEt(3))[Ni(dmit)(2)](z) (unknown stoichiometry) is also a semiconductor with a single-crystal conductivity at room temperature of 10 S cm(-)(1). By contrast, the single-crystal conductivity at room temperature of (SMeEt(2))[Pd(dmit)(2)](2) (7) is rather high (100 S cm(-)(1)). 7 behaves as a pseudometal down to 150 K and undergoes an irreversible metal-insulator transition below this temperature. The crystal structure of 7 has been determined {7 = C(17)H(13)NPd(2)S(21), a = 7.804(4) ?, b = 36.171(18) ?, c = 6.284(2) ?, alpha = 91.68(4) degrees, beta = 112.08(4) degrees, gamma = 88.79(5) degrees, V = 1643(1) ?(3), triclinic, P&onemacr;, Z = 2}. The electronic structure of (SMeEt(2))[Pd(dmit)(2)](2) (7) and the possible origin of the metal-insulator transition at 150 K are discussed on the basis of tight-binding band structure calculations.     

Bringing an important macrocycle into a polyoxometalate matrix: synthesis, crystal structure, spectroscopy and electrochemistry of [Co(III)(transdiene)(Cl)2]2[Mo6O19], [Ni(II)(transdiene)][W6O19]·DMSO·DCM and [Zn(II)(transdsiene)(Cl)]2[W6O19

Three polyoxometalate based ion pair solids (1-3), in which Co(III) (d(6)), Ni(II) (d(8)) and Zn(II) (d(10)) complexes of a tetra-aza macrocycle, Me(6)-trans-[14]-diene act as the cationic moieties, have been reported. The title complexes, formulated as [Co (C(16)H(32)N(4))(Cl)(2)](2)[Mo(6)O(19)] (1), [Ni(C(16)H(32)N(4))][W(6)O(19)]·DMSO·DCM (2) and [Zn(C(16)H(32)N(4))(Cl)](2)[W(6)O(19)] (3) (C(16)H(32)N(4) = Me(6)-trans-[14]-diene), are the first crystallographic paradigms where transition metal complexes of a Schiff condensed tetra-aza macrocycle have been associated with an isopolyanion, [M(6)O(19)](2-) (M = Mo(vi) and W(vi)). Compounds 1-3 have been characterized through routine spectroscopic analyses including elemental analysis and their structures have been unambiguously determined through single crystal X-ray crystallography. The molecules of compound 1 assemble obeying P1 (#2) space symmetry, whereas those of compounds 2 and 3 follow the higher symmetrical ensemble P2(1)/c (#14). The ESR spectral studies of compounds 1-3 have revealed their diamagnetic (low-spin) nature. The last part of this article describes the electrochemical properties of the title compounds.     

Mechanistic diversity covering 15 orders of magnitude in rates: cyanide exchange on [M(CN)(4)](2-) (M = Ni, Pd, and Pt)

Kinetic studies of cyanide exchange on [M(CN)(4)](2-) square-planar complexes (M = Pt, Pd, and Ni) were performed as a function of pH by (13)C NMR. The [Pt(CN)(4)](2-) complex has a purely second-order rate law, with CN(-) as acting as the nucleophile, with the following kinetic parameters: (k(2)(Pt,CN))(298) = 11 +/- 1 s(-1) mol(-1) kg, DeltaH(2) (Pt,CN) = 25.1 +/- 1 kJ mol(-1), DeltaS(2) (Pt,CN) = -142 +/- 4 J mol(-1) K(-1), and DeltaV(2) (Pt,CN) = -27 +/- 2 cm(3) mol(-1). The Pd(II) metal center has the same behavior down to pH 6. The kinetic parameters are as follows: (k(2)(Pd,CN))(298) = 82 +/- 2 s(-1) mol(-1) kg, DeltaH(2) (Pd,CN) = 23.5 +/- 1 kJ mol(-1), DeltaS(2) (Pd,CN) = -129 +/- 5 J mol(-1) K(-1), and DeltaV(2) (Pd,CN) = -22 +/- 2 cm(3) mol(-1). At low pH, the tetracyanopalladate is protonated (pK(a)(Pd(4,H)) = 3.0 +/- 0.3) to form [Pd(CN)(3)HCN](-). The rate law of the cyanide exchange on the protonated complex is also purely second order, with (k(2)(PdH,CN))(298) = (4.5 +/- 1.3) x 10(3) s(-1) mol(-1) kg. [Ni(CN)(4)](2-) is involved in various equilibrium reactions, such as the formation of [Ni(CN)(5)](3-), [Ni(CN)(3)HCN](-), and [Ni(CN)(2)(HCN)(2)] complexes. Our (13)C NMR measurements have allowed us to determine that the rate constant leading to the formation of [Ni(CN)(5)](3-) is k(2)(Ni(4),CN) = (2.3 +/- 0.1) x 10(6) s(-1) mol(-1) kg when the following activation parameters are used: DeltaH(2)() (Ni,CN) = 21.6 +/- 1 kJ mol(-1), DeltaS(2) (Ni,CN) = -51 +/- 7 J mol(-1) K(-1), and DeltaV(2) (Ni,CN) = -19 +/- 2 cm(3) mol(-1). The rate constant of the back reaction is k(-2)(Ni(4),CN) = 14 x 10(6) s(-1). The rate law pertaining to [Ni(CN)(2)(HCN)(2)] was found to be second order at pH 3.8, and the value of the rate constant is (k(2)(Ni(4,2H),CN))(298) = (63 +/- 15) x10(6) s(-1) mol(-1) kg when DeltaH(2) (Ni(4,2H),CN) = 47.3 +/- 1 kJ mol(-1), DeltaS(2) (Ni(4,2H),CN) = 63 +/- 3 J mol(-1) K(-1), and DeltaV(2) (Ni(4,2H),CN) = - 6 +/- 1 cm(3) mol(-1). The cyanide-exchange rate constant on [M(CN)(4)](2-) for Pt, Pd, and Ni increases in a 1:7:200 000 ratio. This trend is modified at low pH, and the palladium becomes 400 times more reactive than the platinum because of the formation of [Pd(CN)(3)HCN](-). For all cyanide exchanges on tetracyano complexes (A mechanism) and on their protonated forms (I/I(a) mechanisms), we have always observed a pure second-order rate law: first order for the complex and first order for CN(-). The nucleophilic attack by HCN or solvation by H(2)O is at least nine or six orders of magnitude slower, respectively than is nucleophilic attack by CN(-) for Pt(II), Pd(II), and Ni(II), respectively.     

Synthesis, structure, and luminescence of di- and trinuclear palladium/gold and platinum/gold complexes with (2,7-di-tert-butylfluoren-9-ylidene)methanedithiolate

Acetone solutions of [Au(OClO3)(PCy3)] react with complexes [M{S2C=(t-Bu-fy)}2]2- [t-Bu-fy=2,7-di-tert-butylfluoren-9-ylidene; M=Pd (2a), Pt (2b)] or [M{S2C=(t-Bu-fy)}(dbbpy)] [dbbpy=4,4'-di-tert-butyl-2,2'-bipyridyl; M=Pd (3a), Pt (3b)] to give the heteronuclear complexes [M{S2C=(t-Bu-fy)}2{Au(PCy3)}2] [2:1 molar ratio; M=Pd (4a), Pt (4b)], [M{S2C=(t-Bu-fy)}(dbbpy){Au(PCy3)}]ClO4 [1:1 molar ratio; M=Pd (5a), Pt (5b)], or [M{S2C=(t-Bu-fy)}(dbbpy){Au(PCy3)}2](ClO4)2 [2:1 molar ratio; M=Pd (6a), Pt (6b)]. The crystal structures of 3a, 4a, 4b, 5b, and 6a have been solved by single-crystal X-ray studies and, in the cases of the heteronuclear derivatives, reveal the formation of short Pd...Au or Pt...Au metallophilic contacts in the range of 3.048-3.311 A. Compounds 4a and b and 5a and b undergo a dynamic process in solution that involves the migration of the [Au(PCy3)]+ units between the sulfur atoms of the dithiolato ligands. The coordination of 2a and b and 3a and b to [Au(PCy3)]+ units results in important modifications of their photophysical properties. The dominant effect in the absorption spectra is an increase in the energy of the MLCT (4a and b) or charge transfer to diimine (5a, b, 6a, b) transitions because of a decrease in the energies of the mixed metal/dithiolate HOMOs. The Pd complexes 2a and 4a are luminescent at 77 K, and the features of their emissions are consistent with an essentially metal-centered 3d-d state. The Pt/Au complexes are also luminescent at 77 K, and their emissions can be assigned as originating from a MLCT triplet state (4b) or a mixture of charge transfer to diimine and diimine intraligand pi-pi* triplet states (5b and 6b).     

Ring-opening reactions induced by gold(I) of five- and four-coordinate palladium(II) and platinum(II) complexes containing tripodal or linear polyphosphines

The tripodal ligands NP(3)(tris[2-(diphenylphosphino)ethyl]amine) and PP(3)(tris[2-(diphenylphosphino)ethyl]phosphine), form five-coordinate [Pd(NP(3))X]X [X = Cl (1), Br (2)], [M(PP(3))X]X [M = Pd: X = Cl (4), Br (5), I (6); M = Pt, X = Cl (7), Br (8), I (9)] and four-coordinate[Pd(NP(3))I]I (3) complexes containing three fused rings around the metal. The interaction between Au(tdg)X (tdg = thiodiglycol; X = Cl, Br) or AuI and the respective ionic halo complexes 1-9 in a 1:1 stoichiometric ratio occurs via a ring-opening reaction with formation of the heterobimetallic systems PdAu(NP(3))X(3)[X = Cl (11), Br (12), I (13)], [MAu(PP(3))X(2)]X [M = Pd: X = Cl (14), Br (15), I (16); M = Pt: X = Cl (17), Br (18), I (19)]. The cations of complexes 17 and 18 were shown, by X-ray diffraction, to contain a distorted square-planar Pt(II) arrangement (Pt(P(2)P)X) where PP(3) is acting as tridentate chelating ligand and an almost linear PAuX moiety bearing the dangling phosphorus formed in the ring-opening process. PPh(3) coordinates to Au(I) and not to M(II) when added in excess to 14 and 17. Complexes 14-17 and [Pt(P(4))](BPh(4))(2) (10) (P4=linear tetraphosphine) also react with A(I), via chelate ring-openings to give MAu(2)(PP(3))X(4) [M = Pd: X = Cl (20), Br (21), I (22); M = Pt: X = Cl (23)] and [Pt(2)Au(2)(mu-Cl)(2)(mu-P(4))(2)](BPh(4))(4) (24), respectively.     

Crystallographic, electrochemical, and electronic structure studies of the mononuclear complexes of Au(I)/(II)/(III) with [9]aneS2O ([9]aneS2O = 1-oxa-4,7-dithiacyclononane)

The mononuclear macrocyclic complexes [Au(I)([9]aneS2O)2]BF4 x MeCN 1a, [Au(II)([9]aneS2O)2](BF4)2 x 2 MeCN 2a, and [Au(III)([9]aneS2O)2](ClO4)6(H5O2)(H3O)2 3 ([9]aneS2O = 1-oxa-4,7-dithiacyclononane) have been prepared and structurally characterized by single crystal X-ray crystallography. The oxidation of [Au([9]aneS2O)2](+) to [Au([9]aneS2O)2](2+) involves a significant reorganization of the co-ordination sphere from a distorted tetrahedral geometry in [Au([9]aneS2O)2](+) [Au-S 2.3363(12), 2.3877(12), 2.6630(11), 2.7597(13) A] to a distorted square-planar co-ordination geometry in [Au([9]aneS2O)2](2+). The O-donors in [Au([9]aneS2O)2](2+) occupy the axial positions about the Au(II) center [Au...O = 2.718(2) A] with the S-donors occupying the equatorial plane [Au-S 2.428(8) and 2.484(8) A]. [Au([9]aneS2O)2](3+) shows a co-ordination sphere similar to that of [Au([9]aneS2O)2](2+) but with significantly shorter axial Au...O interactions [2.688(2) A] and equatorial Au-S bond lengths [2.340(4) and 2.355(6) A]. The cyclic voltammogram of 1 in MeCN (0.2 M NBu4PF6, 253 K) at a scan rate of 100 mV s(-1) shows an oxidation process at E(p)(a) = +0.74 V and a reduction process at E(p)(c) = +0.41 V versus Fc(+)/Fc assigned to the two-electron Au(III/I) couple and a second reduction process at E(p)(c) = +0.19 V assigned to the Au(I/0) couple. This electrochemical assignment is confirmed by coulometric and UV-vis spectroelectrochemical measurements. Multifrequency EPR studies of the mononuclear Au(II) complex [Au([9]aneS2O)2](2+) in a fluid solution at X-band and as frozen solutions at L-, S-, X-, K-, and Q-band reveal g(iso) = 2.0182 and A(iso) = -44 x 10(-4) cm(-1); g(xx) = 2.010, g(yy) = 2.006, g(zz) = 2.037; A(xx) = -47 x 10(-4) cm(-1), A(yy) = -47 x 10(-4) cm(-1), A(zz) = -47 x 10(-4) cm(-1); P(xx) = -18 x 10(-4) cm(-1), P(yy) = -10 x 10(-4) cm(-1), and P(zz) = 28 x 10(-4) cm(-1). DFT calculations predict a singly occupied molecular orbital (SOMO) with 27.2% Au 5d(xy) character, consistent with the upper limit derived from the uncertainties in the (197)Au hyperfine parameters. Comparison with [Au([9]aneS3)2](2+) reveals that the nuclear quadrupole parameters, P(ii) (i = x, y, z) are very sensitive to the nature of the Au(II) co-ordination sphere in these macrocyclic complexes. The observed geometries and bond lengths for the cations [Au([9]aneS2O)2](+/2+/3+) reflect the preferred stereochemistries of d(10), d(9), and d(8) metal ions, respectively, with the higher oxidation state centers being generated at higher anodic potentials compared to the related complexes [Au([9]aneS3)2](+/2+/3+).     

Electrochemical determination of nitrite using a gold nanoparticles-modified glassy carbon electrode prepared by the seed-mediated growth technique.

Seed-mediated growth of gold nanoparticles on glassy carbon (GC) surfaces was developed. The field emission scanning electron microscopy (FE-SEM) and electrochemical characterization confirmed the effective attachment of gold nanoparticles on GC surface with such a wet-chemical method. The as-prepared gold nanoparticles attached glassy carbon electrode (Au/GCE) presented excellent catalytic ability toward the oxidation of nitrite. Compared with bare GCE and planar gold electrode, the Au/GCE obviously decreased the overpotential of nitrite oxidation and improved the peak current. The catalytic current was found to be linearly proportional to the nitrite concentration in the range of 1 x 10(-5) - 5 x 10(-3) M, with a detection limit of 2.4 x 10(-6) M. The Au/GCE was successfully applied to the electrochemical determination of nitrite in a real wastewater sample, showing excellent stability and anti-interference ability.     

Chloroform extraction of metal ethyl xanthates from hydrochloric acid media

The chloroform extraction of 32 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, Pb, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Ce, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Os) from O.1-10M hydrochloric acid media in the presence of potassium ethyl xanthate has been studied. The oxidation states in which some elements react, and potential analytical separations, are discussed. Pd(II), As(III) and Se(IV) are completely extracted as ethyl xanthate complexes, Te(IV) is almost completely extracted, and Au(III) is largely extracted over the range of acid concentration investigated. Mn(II), Zn, Rh(III), Ir(IV), Ru(III), Os(IV), Cr(III), Cr(VI), Ce(III) and Ce(IV) are not extracted. Ge is partly extracted from 6-10M media as the chloro-complex. Depending on the acid concentration, the remaining elements are all partially extracted as xanthate complexes.     

Square-planar coordinated polyanions of palladium, platinum, and gold stannaborate [SnB11H11]2- coordination chemistry

The tetrasubstituted polyanions of platinum, palladium, and gold [M(SnB(11)H(11))(4)](x-) (x=6, M=Pd, Pt; x=5, M=Au) have been prepared and characterized by single-crystal X-ray diffraction, elemental analysis, IR, Raman, (11)B, and (119)Sn heteronuclear NMR spectroscopy. In the case of the platinum derivative [Bu(3)MeN](6)[Pt(SnB(11)H(11))(4)] (2) (119)Sn M?ssbauer spectroscopy has been carried out. The isolated salts are stable towards moisture and air and the complexes 2 and 3 were treated with 1,3-bis(diphenylphosphino)propane (dppp) to give the respective substitution products [Bu(3)MeN](2)[(dppp)M(SnB(11)H(11))(2)] (M=Pd, Pt).     

Cation‐anion radical interactions between halopyridinium cations and metal dithiolene complexes [M(C2S2)2CN]−•: A theoretical study of halogen bonds in conducting or magnetic molecular materials

Metal dithiolene complexes have been extensively used for the elaboration of conducting or magnetic materials, whose molecular arrangements can be sensitively influenced by strong and directional noncovalent interactions. In this work, halogen bonds between N‐methyl‐3‐halopyridinium cations and cyano‐substituted anion radicals, [M(C₂S₂)₂CN]^?? (M = Ni, Pd, and Pt), were systematically investigated at the M06 level of theory. The CN···X interactions in these systems are predicted to be considerably strong and play a vital role in the controlling of the crystal structures of molecular conductors and magnets. The electrostatics contributes mainly to the attraction of these halogen bonds, while the orbital interaction is also important. Particularly, the formation of these interactions has little effect on the distribution of SOMOs, which is strongly delocalized on the two dithiolene moieties. These results will assist in the design of functional materials that exhibit exotic conducting or magnetic properties.     

Heteroleptic dipyrrinato complexes containing 5-ferrocenyldipyrromethene and dithiocarbamates as coligands: selective chromogenic and redox probes

Six heteroleptic dipyrrinato complexes [Ni(fcdpm)(dedtc)] (1), [Ni(fcdpm)(dipdtc)] (2), [Ni(fcdpm)(dbdtc)] (3), [Pd(fcdpm)(dedtc)] (4), [Pd(fcdpm)(dipdtc)] (5), and [Pd(fcdpm)(dbdtc)] (6) (fcdpm = 5-ferrocenyldipyrromethene; dedtc = diethyldithiocarbamate; dipdtc = diisopropyldithiocarbamate; dbdtc = dibutyldithiocarbamate) have been synthesized and characterized by elemental analyses and spectral (ESI-MS, IR, (1)H, (13)C NMR, UV-vis) and electrochemical studies. Crystal structures of 1, 2, 4, and 5 have been authenticated by X-ray single-crystal analyses. Nickel-based complexes 1-3 display selective chromogenic and redox sensing for Hg(2+) and Pb(2+) ions, while palladium complexes 4-6 display selective chromogenic and redox sensing only for Hg(2+). Electronic absorption, ESI-MS, and electrochemical studies indicated that sensing arises from interaction between 1-3 and Hg(2+)/Pb(2+) through sulfur of the coordinated dithiocarbamates, while it arises from the pyrrolic nitrogen of fcdpm and dithiocarbamate sulfur from 4-6 and Hg(2+). Different modes of binding between Ni and Pd complexes have further been supported by theoretical studies. The receptor-cation binding constants (K(a)) and stoichiometry between probes and Hg(2+)/Pb(2+) have been estimated by the Benesi-Hildebrand method and Job's plot analysis. Detection limits for 1-3 toward Hg(2+)/Pb(2+) and 4-6 for Hg(2+) have been found to be reasonably high.     

Monoanionic molybdenum and tungsten tris(dithiolene) complexes: a multifrequency EPR study

Numerous Mo and W tris(dithiolene) complexes in varying redox states have been prepared and representative examples characterized crystallographically: [M(S(2)C(2)R(2))(3)](z) [M = Mo, R = Ph, z = 0 (1) or 1- (2); M = W, R = Ph, z = 0 (4) or 1- (5); R = CN, z = 2-, M = Mo (3) or W (6)]. Changes in dithiolene C-S and C-C bond lengths for 1 versus 2 and 4 versus 5 are indicative of ligand reduction. Trigonal twist angles (Θ) and dithiolene fold angles (α) increase and decrease, respectively, for 2 versus 1, 5 versus 4. Cyclic voltammetry reveals generally two reversible couples corresponding to 0/1- and 1-/2- reductions. The electronic structures of monoanionic molybdenum tris(dithiolene) complexes have been analyzed by multifrequency (S-, X-, Q-band) EPR spectroscopy. Spin-Hamiltonian parameters afforded by spectral simulation for each complex demonstrate the existence of two distinctive electronic structure types. The first is [Mo(IV)((A)L(3)(5-?))](1-) ((A)L = olefinic dithiolene, type A), which has the unpaired electron restricted to the tris(dithiolene) unit and is characterized by isotropic g-values and small molybdenum superhyperfine coupling. The second is formulated as [Mo(V)((B)L(3)(6-))](1-) ((B)L = aromatic dithiolene, type B) with spectra distinguished by a prominent g-anisotropy and hyperfine coupling consistent with the (d(z(2)))(1) paramagnet. The electronic structure disparity is also manifested in their electronic absorption spectra. The compound [W(bdt)(3)](1-) exhibits spin-Hamiltonian parameters similar to those of [Mo(bdt)(3)](1-) and thus is formulated as [W(V)((B)L(3)(6-))](1-). The EPR spectra of [W((A)L(3))](1-) display spin-Hamiltonian parameters that suggest their electronic structure is best represented by two resonance forms {[W(IV)((A)L(3)(5-?))](1-) ? [W(V)((A)L(3)(6-))](1-)}. The contrast with the corresponding [Mo(IV)((A)L(3)(5-?))](1-) complexes highlights tungsten's preference for higher oxidation states.     

A new family of conjugated metallopolymers from electropolymerised bis[(terthiophene)dithiolene] complexes

Bis(dithiolene) metal complexes incorporating fused terthiophene units have been prepared; the nickel analogue undergoes electropolymerisation to afford a low bandgap material with very broad absorption characteristics.     

Geometries, stabilities, and electronic properties of Pt-group-doped gold clusters, their relationship to cluster size, and comparison with pure gold clusters

A systematic study of bimetallic Au(n)M(2) (n = 1-6, M = Ni, Pd, and Pt) clusters is performed by using density functional theory at the B3LYP level. The geometric structures, relative stabilities, HOMO-LUMO gaps, natural charges and electronic magnetic moments of these clusters are investigated, and compared with pure gold clusters. The results indicate that the properties of Au(n)M(2) clusters for n = 1-3 diverge more from pure gold clusters, while those for n = 4-6 show good agreement with Au(n) clusters. The dissociation energies, the second-order difference of energies, and HOMO-LUMO energy gaps, exhibiting an odd-even alternation, indicate that the Au(4)M(2) clusters are the most stable structures for Au(n)M(2) (n = 1-6, M = Ni, Pd, and Pt) clusters. Moreover, we predict that the average atomic binding energies of these clusters should tend to a limit in the range 1.56-2.00 eV.