Conductometric and potentiometric investigations of ionic surfactant– gelatin interaction

 The interaction between gelatin and ionic surfactant is relevant to many biological and industrial processes. Therefore, knowledge of the mechanism of ionic surfactant–gelatin interaction is an important factor influencing practical application of such systems. In this paper, conductometric and potentiometric titrations were used to study the interaction of sodium dodecyl sulfate as an anionic and cetyltrimethylammonium bromide as a cationic surfactant with gelatin solutions of different concentrations. Titrations were carried out at 40 °C by adding surfactant to the gelatin solutions. The titration course was followed by measuring specific conductance and pH changes. On the basis of the titration curves the prevailing mechanisms of surfactant–gelatin interaction, as well as the characteristic concentrations at which they are changed, were determined. From the linear relationship established between the characteristic surfactant concentrations and gelatin concentration, maximal amount of surfactant bonded per gram of gelatin was calculated. Received: 22 July 1997 Accepted: 11 December 1997     

Interaction between poly(ethylene oxide) and sodium dodecyl sulfonate as studied by surface tension, conductivity, viscosity, electron spin resonance and nuclear magnetic resonance

The aggregation of sodium dodecyl sulfonate (AS) in aqueous solution containing various amounts of poly(ethylene oxide) (PEO) has been investigated by different experimental techniques. The experimental techniques include surface tension, conductivity, viscosity, electron spin resonance (ESR) and nuclear magnetic resonance (NMR). The critical aggregate concentration of AS on polymer strands as well as the concentration where the polymer becomes saturated with surfactant has been determined. Both ESR and NMR results indicate that the AS–PEO complex forms a more “open” structure and that PEO may penetrate into the interior of the micelles. Received: 22 October 1998 Accepted in revised form: 1 April 1999     

13G NMR and ESR studies on the association between sodium 3-dodecy I ether-2-hydroxypropy1-1-sulfonate and polyvinylpyrrolidone

The surfactant, sodium 3-dodecy] ether-2-hydroxypropyl-l-sulfonate(SDEHS) was synthesized. The association and standard free energy of formation of the complex between sodium 3-dodecyl etheT-2-hydroxypropyl-l-sulfonate(SDEHS) and polyvinyl-pyrrolidone(PVP) in an aqueous solution have been investigated using C NMR, ESR spectra, and surface tension measurements at the air/ water interface. ¹³C NMR and ESR spectra all indicate that the basic structure of the complex is a micelle-like aggregate, the SDEHS molecules assembling on the methylidync(a) the methylene(α ) carbon in the backbone, and the methyleneβ carbon attached to the nitrogen of PVP molecules, and shield hydrocarbon groups on the surface of the micelle from contacting with water. The measurement results ofsurface tensions show that the amount of surfactant bound to the polymer are linear function of the polymer concentrations ( φ,WI% )i. e( c₂ -c₁ and the miceltization in the presence of PVP occurs at a lower concentration than the critical micelle concentration of SDEHS. The effectiveness of PVP in lowering the free energy of formation of the surfactant aggregates in aqueous solutions increases with the concentrations of PVP.     

Adsorption Behavior of Lysozyme and Tween 80 at Hydrophilic and Hydrophobic Silica–Water Interfaces

Nonionic surfactants such as Tween 80 are used commercially to minimize protein loss through adsorption and aggregation and preserve native structure and activity. However, the specific mechanisms underlying Tween action in this context are not well understood. Here, we describe the interaction of the well-characterized, globular protein lysozyme with Tween 80 at solid–water interfaces. Hydrophilic and silanized, hydrophobic silica surfaces were used as substrates for protein and surfactant adsorption, which was monitored in situ, with ellipsometry. The method of lysozyme and Tween introduction to the surfaces was varied in order to identify the separate roles of protein, surfactant, and the protein–surfactant complex in the observed interfacial behavior. At the hydrophobic surface, the presence of Tween in the protein solution resulted in a reduction in amount of protein adsorbed, while lysozyme adsorption at the hydrophilic surface was entirely unaffected by the presence of Tween. In addition, while a Tween pre-coat prevented lysozyme adsorption on the hydrophobic surface, such a pre-coat was completely ineffective in reducing adsorption on the hydrophilic surface. These observations were attributed to surface-dependent differences in Tween binding strength and emphasize the importance of the direct interaction between surfactant and solid surface relative to surfactant–protein association in solution in the modulation of protein adsorption by Tween 80.     

Interaction between sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP) investigated with forward and reverse component addition protocols employing tensiometric, conductometric, microcalorimetric, electrokinetic, and DLS techniques

The interaction between polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS) after the procedure of addition of the surfactant to polymer and the reverse procedure of addition of polymer to SDS micelles has been studied by tensiometric, conductometric, and microcalorimetric methods. The results have been analyzed and correlated with reference to SDS interfacial adsorption, association, and binding to PVP. Two aggregation states of SDS in presence of PVP have been found. The enthalpies of formation of SDS aggregates/micelles and their binding to the polymer have been evaluated. The interaction of PVP with SDS at concentrations below its critical micellar concentration (CMC) and above have evidenced distinctions. The forward addition protocol (FAP, SDS addition to PVP) and reverse addition protocol (RAP, PVP addition to SDS) have shown similarities and differences. Electrokinetic measurements have evidenced the interacted (SDS–PVP) colloidal products to possess negative zeta potential in the range of −39 to −65 mV. The hydrodynamic diameters of the PVP–SDS dispersion obtained from DLS measurements have ranged between 60 and 160 nm. Both zeta potential and hydrodynamic diameter have depended on [SDS] showing a maximum for the former at twice the critical micellar concentration of SDS.     

Amphoteric hydrophobic associative polymer: I synthesis, solution properties and effect on solution properties of surfactant

Using acrylamide, acrylic acid and octadecyl dimethyl allyl ammonium chloride as monomers, a kind of amphoteric hydrophobic associative polymer was prepared by solution polymerization. The polymer’s molecular weight is from 0.71 to 1.46 × 10⁶ g/mol. And the hydrolysis degree of the polymer is about 14.5%. The polymer solution exhibits good association interaction, and the higher the hydrophobic group content is, the stronger the association interaction is. The adding of the polymer makes the surface tension curves of the mixture solution deviate from the parent solution curve. Both the hydrophobic group content and polymer solution’s concentration exaggerate the deviation with their self-quantity increase. There exist an interaction between the polymer and surfactant, which almost has no direct relationship with the surfactant charge. The major interaction could be a hydrophobic association interaction.     

Crystallization and aggregation behaviors of calcium carbonate in the presence of poly(vinylpyrrolidone) and sodium dodecyl sulfate

An anionic surfactant interacts strongly with a polymer molecule to form a self-assembled structure, due to the attractive force of the hydrophobic association and electrostatic repulsion. In this crystallization medium, the surfactant-stabilized inorganic particles adsorbed on the polymer chains, as well as the bridging effect of polymer molecules, controlled the aggregation behavior of colloidal particles. In this presentation, the spontaneous precipitation of calcium carbonate (CaCO3) was conducted from the aqueous systems containing a water-soluble polymer (poly(vinylpyrrolidone), PVP) and an anionic surfactant (sodium dodecyl sulfate, SDS). When the SDS concentrations were lower than the onset of interaction between PVP and SDS, the precipitated CaCO3 crystals were typically hexahedron-shaped calcite; the increasing SDS concentration caused the morphologies of CaCO3 aggregates to change from the flower-shaped calcite to hollow spherical calcite, then to solid spherical vaterite. These results indicate that the self-organized configurations of the polymer/surfactant supramolecules dominate the morphologies of CaCO3 aggregates, implying that this simple and versatile method expands the morphological investigation of the mineralization process.     

Dilational viscoelasticity of anionic polyelectrolyte/surfactant adsorption films at the water–octane interface

In this article, the interfacial tension and interfacial dilational viscoelasticity of polystyrene sulfonate/surfactant adsorption films at the water–octane interface have been studied by spinning drop method and oscillating barriers method respectively. The experimental results show that different interfacial behaviors can be observed in different type of polyelectrolyte/surfactant systems. Polystyrene sulfonate sodium (PSS)/cationic surfactant hexadecanetrimethyl–ammonium bromide systems show the classical behavior of oppositely charged polyelectrolyte/surfactant systems and can be explained well by electrostatic interaction. In the case of PSS/anionic surfactant sodium dodecyl sulfate (SDS) systems, the coadsorption of PSS at interface through hydrophobic interaction with alkyl chain of SDS leads to the increase of interfacial tension and the decrease of dilational elasticity. For PSS/nonionic surfactant TX100 systems, PSS may form a sub-layer contiguous to the aqueous phase with partly hydrophobic polyoxyethylene chain of TX100, which has little effect on the TX100 adsorption film and interfacial tension.     

Surfactant effect on the lower critical solution temperature of poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups

 The surfactant effect on the lower critical solution temperature (LCST) of thermosensitive poly(organophosphazenes) with methoxy-poly(ethylene glycol) and amino acid esters as side groups was examined in terms of molecular interactions between the polyphosphazenes and surfactants including various anionic, cationic, and nonionic surfactants in aqueous solution. Most of the anionic and cationic surfactants increased the LCST of the polymers: the LCST increased more sharply with increasing length and hydrophobicity of the hydrophobic part of the surfactant molecule. The ΔLCSTs (T _0.03M− T _0M), the change in the LCST by addition of 0 and 0.03 M sodium dodecyl sulfate (SDS), were found to be 7.0 and 14.5 °C for the polymers bearing ethyl esters of glycine and aspartic acid, respectively. The LCST increase of poly(organophosphazene) having a more hydrophobic aspartic acid ethyl ester was 2 times larger compared with that of the polymer having glycine ethyl ester as a side group. The binding behavior of SDS to the polymer bearing glycine ethyl ester as a hydrophobic group was explained from the results of titration of the polymer solutions containing SDS with tetrapropylammonium bromide. Graphic models for the molecular interactions of polymer/surfactant and polymer/surfactant/salt in aqueous solutions were proposed. Received: 17 February 2000/Accepted: 25 April 2000     

Effect of ethanol on the interaction between poly(vinylpyrrolidone) and sodium dodecyl sulfate

The effect of ethanol on the interaction between the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic polymer poly(vinylpyrrolidone) (PVP) has been investigated using a range of techniques including surface tension, fluorescence, electron paramagnetic resonance (EPR), small-angle neutron scattering (SANS), and viscosity. Surface tension and fluorescence studies show that the critical micelle concentration (cmc) of the surfactant decreases to a minimum value around 15 wt % ethanol; that is, it follows the cosurfactant effect. However, in the presence of PVP, the onset of the interaction, denoted cmc(1), between the surfactant and the polymer is considerably less dependent on ethanol concentration. The saturation point, cmc(2), however, reflects the behavior of the cmc in that it decreases upon addition of ethanol. This results in a decrease in the amount of surfactant bound to the polymer [C(bound) = cmc(2) - cmc] at saturation. The viscosity of simple PVP solutions depends on ethanol concentration, but since SANS studies show that ethanol has no effect on the polymer conformation, the changes observed in the viscosity reflect the viscosity of the background solvent. There are significant increases in bulk viscosity when the surfactant is added, and these have been correlated with the polymer conformation extracted from an analysis of the SANS data and with the amount of polymer adsorbed at the micelle surface. Competition between ethanol and PVP to occupy the surfactant headgroup region exists; at low ethanol concentration, the PVP displaces the ethanol and the PVP/SDS complex resembles that formed in the absence of the ethanol. At higher ethanol contents, the polymer does not bind to the ethanol-rich micelle surface.     

Titration microcalorimetry of poly(vinylpyrrolidone) and sodium dodecylbenzenesulphonate in aqueous solutions

Microcalorimetric titrations are carried out on solutions containing the anionic surfactant sodium dodecylbenzenesulphonate (SDBS), and mixtures of SDBS and the uncharged polymer poly(vinylpyrrolidone) (PVP). Measurements are taken at different temperatures. Micellisation of SDBS is driven by hydrophobic bonding. The interaction enthalpy of mixed PVP/SDBS systems shows clearly a consecutive endothermic and exothermic region with increasing surfactant concentration. The endothermic part can be looked upon as an incremental binding isotherm and reflects the number of surfactant molecules involved in the association process. The exothermic region features inverse hydrophobic bonding behaviour. This is related to the flexible nature of the adsorbent, i.e. the polymer. Electrostatic repulsion between neighbouring surfactant molecules causes at increased surfactant concentrations structural rearrangements of the polymer-surfactant complexes. This is accompanied by losing inter- and intrachain linking and entropy gain since the expanded complexes can move more freely. Additional surfactants continue to adsorb on the vacant hydrophobic adsorption sites. The influence of the initial amount of polymer and the electrolyte concentration support our proposals.     

Interaction of bovine serum albumin with nonionic surfactant Tween 80 in aqueous solutions: Complexation and association

It is shown by the methods of precision tensiometry, quasi-elastic light scattering, and UV, IR, and fluorescent spectroscopies that the properties of binary aqueous solutions with a constant concentration of bovine serum albumin and different concentrations of the nonionic surfactant Tween 80 (1 × 10^–7−6 × 10⁻² M) are determined mainly by the complexation and formation of a new phase. The complexation occurs owing to specific interactions (hydrogen bonding) between polar groups of Tween 80 and protein molecules. The solubility in water and surface activity of a 1: 1 Tween 80-protein complex are determined. At the concentrations above the break point on surface tension isotherms (conditionally corresponding to critical association concentration), the particles are formed with radii varying from 16 to 350 nm. At a molar nonionic surfactant/protein ratio in the range of 6–10, the additional binding of Tween 80 molecules by the particles of the new phase due to hydrophobic interactions is observed. Original Russian Text ? N.M. Zadymova, G.P. Yampol’skaya, L.Yu. Filatova, 2006, published in Kolloidnyi Zhurnal, 2006, Vol. 68, No. 2, pp. 187–197.     

Synthesis, characterization, and electron transfer reaction of some surfactant–cobalt(III) complex ions

Abstract  

The surfactant complex ion cis-[Co(tmd)₂(C₁₂H₂₅NH₂)₂]³⁺ (tmd = 1,3-propanediamine, C₁₂H₂₅NH₂ = dodecylamine) has been synthesized and characterized by elemental analysis and spectral data. In addition we have determined the critical micelle concentration of the surfactant–cobalt(III) complex and studied the kinetics and mechanism of the complex with ferrocyanide anion. The reaction is found to be second order, and the second-order rate constant increases with increasing initial concentration of the surfactant–cobalt(III) complex due to the presence of self-micelles formed by the complex itself. The thermodynamic parameters were determined. The results have been analyzed.     

Studies on the Reaction Kinetics and Mechanism of Iron(II) Reduction of the <Emphasis Type="Italic">cis</Emphasis>-Halogeno(cetylamine)bis(ethylenediamine)cobalt(III) Complex Ion in Aqueous Perchlorate Medium

The electron-transfer kinetics of the ionic surfactant complex cis-chloro/bromo(cetylamine)bis(ethylenediamine)cobalt(III) by iron(II) in aqueous perchlorate medium at μ=1.0 mol⋅dm⁻³ ionic strength have been studied at 303, 308 and 313 K by spectrophotometry under pseudo-first-order conditions using an excess of the reductant. The effects of [H⁺], ionic strength and [Fe²⁺] on the rate were determined. The reaction was found to be second order and showed to be independence of the acid concentration in the range [H⁺]=0.05–0.25 mol⋅dm⁻³. The second order rate constant increased with surfactant–cobalt(III) concentration and the occurrence of aggregation of the complex itself altered the reaction rate. Activation and thermodynamic parameters have been computed. It is suggested that the reaction of Fe²⁺(aq) with the cobal (III) complex proceeds by an inner-sphere mechanism. The critical micelle concentration (CMC) values of these surfactant–metal complexes were obtained in aqueous solution from conductance measurements. Specific conductivity data (at 303, 308 and 313 K) served for the evaluation of the temperature-dependence of the critical micelle concentration (CMC) and the thermodynamics of micellization (ΔG _m^o,ΔH _m^o and ΔS _m^o).     

Interaction between polymer and anionic/nonionic surfactants and its mechanism of enhanced oil recovery

Various experimental methods were used to investigate interaction between polymer and anionic/nonionic surfactants and mechanisms of enhanced oil recovery by anionic/nonionic surfactants in the present paper. The complex surfactant molecules are adsorbed in the mixed micelles or aggregates formed by the hydrophobic association of hydrophobic groups of polymers, making the surfactant molecules at oil-water interface reduce and the value of interfacial tension between oil and water increase. A dense spatial network structure is formed by the interaction between the mixed aggregates and hydrophobic groups of the polymer molecular chains, making the hydrodynamic volume of the aggregates and the viscosity of the polymer solution increase. Because of the formation of the mixed adsorption layer at oil and water interface by synergistic effect, ultra-low interfacial tension (～2.0?×?10^?3 mN/m) can be achieved between the novel surfactant system and the oil samples in this paper. Because of hydrophobic interaction, wettability alteration of oil-wet surface was induced by the adsorption of the surfactant system on the solid surface. Moreover, the studied surfactant system had a certain degree of spontaneous emulsification ability (D50?=?25.04?µm) and was well emulsified with crude oil after the mechanical oscillation (D50?=?4.27?µm).     

Investigation on the aggregation behaviors of DDAB/NaDEHP catanionic vesicles in the absence and presence of a negatively charged polyelectrolyte

The aggregation behaviors of the cationic and anionic (catanionic) surfactant vesicles formed by didodecyldimethylammonium bromide (DDAB)/sodium bis(2-ethylhexyl) phosphate (NaDEHP) in the absence and presence of a negatively charged polyelectrolyte are investigated. The amount of the charge on the vesicle can be tuned by controlling the DDAB/NaDEHP surfactant molar ratio. The charged vesicular dispersions made of DDAB/NaDEHP are mixed with a negatively charged polyelectrolyte, poly(4-styrenesulfonic acid-co-maleic acid) sodium (PSSAMA), to form complexes. Depending on the polyelectrolyte/vesicle charge ratio, complex flocculation or precipitation occurs. Characterization of the catanionic vesicles and the complexes are performed by transmission electron microscope (TEM), Cryo-TEM, dynamic light scattering (DLS), conductivity, turbidity, zeta potential, isothermal titration calorimetry (ITC) and small-angle X-ray scattering (SAXS) measurements.     

Association in Unsalted and Brine Solutions of a Water-Soluble Terpolymer with <Emphasis Type="Italic">p</Emphasis>-Vinylbenzyl-Terminated Octylphenoxy Poly(ethylene oxide)

An associating terpolymer (PAOE) of acrylamide (AM), sodium 2-acrylamido-2-methylpropane sulphonate (NaAMPS), and a novel macromonomer: p-vinylbenzyl-terminated octylphenoxy poly(ethylene oxide) (VOE, degree of polymerization: 4) was synthesized by aqueous free-radical copolymerization. The PAOE polymer exhibited excellent thickening properties in unsalted and brine solutions. The electrostatic shielding of repulsive interactions of the polymer was much weaker than that of the linear associating polymers with small hydrophobic monomers. This brine solution exhibited unexpected salt-thickening behaviors twice, and good resistance to salt and ageing. The intermolecular hydrophobic association in unsalted and brine PAOE solutions, as functions of polymer and NaCl concentration, were characterized by fluorescence spectroscopy. With the addition of NaCl, the polymer chains were comparatively extended and continuous network structures were formed via the intermolecular hydrophobic association in brine solutions as well as in unsalted solutions at 0.15–0.25 g⋅dL⁻¹ PAOE, as observed by a scanning electron microscope (SEM).     

Solution properties of hydrophobically modified acrylamide-based polysulfobetaines in the presence of surfactants

Polymer–surfactant interactions in aqueous solutions of a acrylamide-based, hydrophobically modified polysulfobetaine (ADS) containing 3-[N-(2-methacryloxylethyl)-N,N-dimethylammonio]-propane sulfonate and stearyl methylacrylate, with sodium dodedyl sulfate (SDS), N-dodecyl-N,N,N-trimethylammonium bromide (DTAB), and Triton X-100 were studied using surface tension, rheology, Rayleigh light scattering, and dynamic laser light scattering techniques. The purpose of this study was to highlight the influences of the surfactant structure and the nature of the surfactant head group on the polymer–surfactant interactions. The results show that the interaction and association between ADS and surfactants are distinctly varied depending on surfactant type and surfactant concentration. SDS produced the strongest interactions with ADS, while DTAB and Triton X-100 interact with ADS to a lesser degree, which is attributed to surfactant structure and the nature of the surfactant head group. For SDS and DTAB, there are two driving forces for the complexation of the polymer and surfactants, resulting from the electrostatic interaction and the hydrophobic association. However, for the nonionic surfactant Triton X-100, only hydrophobic association predominated in the interaction between ADS and the surfactant. The mechanism and reconstruction of the polymer–surfactant complexes have been evaluated and discussed.     

Employment of a useful liquid membrane electrode system to characterise the micelles of bile salts and other detergents in pure and mixed states

Ion-pairs or coacervates (formed by the reaction between cationic and anionic surfactants) dissolved in nitrobenzene can behave as surfactant-ion registering devices to respond to both surfactant cation and anion. The complexes of cetyltrimethyl ammonium bromide with sodium dodecyl sulfate, sodium salts of deoxycholic and chenodeoxycholic acids, and Aerosol Orange T have been used in nitrobenzene to generate such useful liquid membranes. The complex of dimethyldioctadecyl ammonium bromide and sodium cholate has been used to study the cholate ion behaviour since its complex with cetyltrimethyl ammonium bromide is water soluble. The electrochemical behaviours of the liquid membranes have been found to be fairly good and reproducible. The membrane potential measurements have been used to determine the critical micelle concentrations of the surfactants in pure as well as in mixed states to evaluate surfactant—surfactant interaction in the micelles of the latter.     

Effect of Cyclodextrins on the Interaction Between BSA and Sodium Dodecyl Benzene Sulfonate

Cyclodextrins offer the potential of modulating protein–surfactant interactions. In our work, the effect of cyclodextrin (CD) on the interaction between bovine serum albumin (BSA) and the anionic surfactant sodium dodecyl benzene sulfonate (SDBS) has been studied by isothermal titration calorimetry (ITC), fluorescence spectra and circular dichroism measurements. The presences of cyclodextrin can slightly hinder the strong interactions between BSA and SDBS by the combination of electrostatic and hydrophobic interactions between BSA and SDBS. Furthermore, the effectiveness of α-CD is lower than that of β-CD, due to the lower association constant between α-CD and surfactant. The presence of both α- and β-CD totally hinders the nonspecific interactions between BSA and SDBS, because the hydrophobic interaction between cyclodextrin and surfactant is stronger than that between BSA and surfactant.