Size control of self-assembled nanoparticles by an emulsion/solvent evaporation method

A novel and simple method for size control of self-assembled nanoparticles is suggested in this paper. Polymeric nanoparticles were prepared from amphiphilic chitosan derivatives fluorescein isothiocyanate (FITC)-conjugated glycol chitosans (FGCs). The attachment of hydrophobic FITC onto hydrophilic glycol chitosan induced the amphiphilic conjugate to form self-assembled nanoparticles in aqueous media, depending on degree of substitution. The size of self-assembled nanoparticles was controlled by a novel emulsion/solvent evaporation method. Adding a small amount of an immiscible solvent with water (chloroform) to FGC nanoparticle suspensions in aqueous media followed by ultrasonification and solvent evaporation led to partial dissociation and subsequent reformation of nanoparticles. The evaporation of chloroform facilitated the hydrophobic association, which resulted in more dense and hardened hydrophobic cores. The size of nanoparticles was closely related with the FGC concentration in the emulsion. The mean diameters of self-assembled nanoparticles were 150–500 nm at the FGC concentrations of 0.3–2.5 mg/ml. Higher FGC concentration resulted in larger particles. The polydispersity factors (μ ₂/Γ ²) of the reformed nanoparticles were fairly low (0.001–0.094), indicating narrow size distribution. The FGC nanoparticles were stable in phosphate-buffered saline at 37°C up to 20 days. Lactose was a good excipient for maintaining the structural integrity of nanoparticles during freeze-drying. Without lactose, the freeze-dried nanoparticles were not homogeneously redispersed in aqueous media. However, the freeze-dried nanoparticles with lactose were spontaneously redispersed in aqueous milieu with their own sizes.     

Facile synthesis of gold nanoparticles capped with an ammonium-based chiral ionic liquid crystal

Herein, we describe a facile synthesis of stable chiral ionic liquid crystal (ILC)-capped gold nanoparticles. A new ILC containing a chiral cholesterol moiety having a terminal triethylammonium group was synthesised which exhibited an enantiotropic lamellar mesophase. Stable, monodisperse citrate-stabilised gold nanoparticles having a size of ~60 nm were prepared and the citrate ligands on the gold nanoparticles were replaced with chiral ILC through a two-phase ligand exchange process. The resulting chiral ILC-stabilised particles were characterised using UV–visible (UV–Vis) and transmission electron microscopy (TEM) studies. Different from the citrate-stabilised nanoparticles, the ligand exchanged gold nanoparticles were dispersible in organic solvent and resulting dispersion was stable for more than observed period of 3 months. Furthermore, the chiral ILC-decorated gold nanoparticles were found to be well dispersible in a nematic host without any aggregation and induced a vertical alignment of the nematic director.     

Redispersible and stable amorphous calcium phosphate nanoparticles functionalized by an organic bisphosphate

Although much effort has been focused on the preparation of stable amorphous calcium phosphate （ACP） nanoparticles in aqueous solution, the redispersibility and long-term stability of ACP nanoparticles in aqueous solution remains an unresolved problem. In this work, stable colloidal ACPs were prepared by using an organic bisphosphonate （BP） as a sterically hindered agent in aqueous solution. The harvested calcium phosphate nanoparticles were characterized by inductively coupled plasma atomic emission spectrometry （ICP-AES）, Fourier transform infrared （FTIR）, X-ray diffraction （XRD）, dynamic light scattering （DLS） and transmission electron microscopy （TEM）. ICP-AES, FTIR and XRD results suggested the particles were ACP. DLS and TEM results indicated that the size of the ACP nanoparticles were in the range of 60 nm with a spherical morphology. The resulting calcium phosphate nanoparticles retained its amorphous nature in aqueous solution for at least 6 months at room temperature due to the stabilizing effect of the organic bisphosphonate. Moreover, the surface of the ACP nanoparticles adsorbed with the organic bisphosphate used showed good redispersibility and high colloid stability both in organic and aqueous solutions.     

Synthesis of gold nanoparticles from an organometallic compound in supercritical carbon dioxide

This article presents the synthesis of gold nanoparticles in a single-phase supercritical fluid carbon dioxide solvent. The gold nanoparticles were formed by the reduction of triphenylphosphine gold(I) perfluorooctanoate with dimethylamineborane. Transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis spectroscopy reveal the formation of gold nanoparticles of 1 nm in diameter. A high dispersion stability of the gold nanoparticles in supercritical carbon dioxide can be obtained by binding both triphenylphosphine and fluorocarbon ligands on the surface of the gold nanoparticles.     

Photorecovery of nanoparticles from an organic solvent

Commercial silica nanoparticles were dispersed in toluene, stabilized by a mixture of sodium bis(2-ethylhexyl)sulfosuccinate (AOT) and a photolyzable anionic surfactant sodium hexylphenylazosulfonate (C6PAS). Selective photolysis of the interfacial C6PAS component induces colloid instability, resulting in flocculation and eventual phase separation of the silica nanoparticles. UV-vis spectroscopy was used to follow the photochemical breakdown of C6PAS; diffusion coefficient measurements by dynamic light scattering were employed to monitor the photoinduced flocculation; and silica contents in the toluene, before and after UV light irradiation, were determined gravimetrically. The results show that light can be used to trigger separation and recovery of nanoparticles stabilized by photolabile interfacial layers.     

Development of Palladium Surface‐Enriched Heteronuclear Au–Pd Nanoparticle Dehalogenation Catalysts in an Ionic Liquid

Heteronuclear Au–Pd nanoparticles were prepared and immobilized in the functionalized ionic liquid [C₂OHmim][NTf₂]. The structural and electronic properties of the nanoparticles were characterized by a range of techniques and the surface of the nanoparticles was found to be enriched in Pd. Moreover, the extent of Pd enrichment is easily controlled by varying the ratio of Au and Pd salts used in the synthesis. The heteronuclear nanoparticles were found to be effective catalysts in dehalogenation reactions with no activity observed for the pure Au nanoparticles and only limited activity for the pure Pd nanoparticles. The activity of the heteronuclear nanoparticles may be attributed to charge transfer from Pd to Au and consequently to more efficient reductive elimination.     

An excellent single-layered photoreceptor composed of oxotitanium phthalocyanine nanoparticles and an insulating resin

Photoconductive oxotitanium phthalocyanine (TiOPc) nanoparticles with an average diameter of 3.6 nm were successfully prepared. These nanoparticles could be well dispersed in organic solvents such as 1,2-dichloroethane to form a stable organic sol of solvent-stabilized TiOPc nanoparticles. An obvious size effect of TiOPc semiconductor was revealed by the UV-vis absorption spectroscopy measurements. Single-layered photoreceptors were prepared by coating colloidal solutions containing the C(2)H(4)Cl(2)-stabilized TiOPc nanoparticles and a polycarbonate (PC) resin onto aluminum plates. Optimum xerographic properties of the present photoreceptors were obtained on a photoreceptor containing 20 wt% of the TiOPc nanoparticles, which exhibited a photoconductive sensitivity (E(1/2)) of 0.54 microJ/cm(2) and could be positively charged to 596 V.     

Palladium magnetic nanoparticle‐polyethersulfone composite membrane as an efficient and versatile catalytic membrane reactor

Developing polymer catalytic membrane reactors is an aim due to its outstanding advantages. In this paper, a novel catalytic membrane containing palladium‐supported magnetic nanoparticles is introduced. Silica‐iron oxide core shell nanoparticles were first prepared and functionalized by phosphine ionic liquid functionalized poly(ethylene glycol). The modified magnetic nanoparticles were used as support for immobilization of palladium. The final palladium‐immobilized nanoparticles were used as active filler for the preparation of membrane reactor. The prepared membranes were characterized, and their activities were tested in carbon‐carbon bond formation and catalytic reduction. The catalytic membrane showed good performance in the mentioned reactions.     

Thermal behavior and film formation from an organogermanium polymer/nanoparticle precursor

In situ high-resolution transmission electron microscopy (HRTEM) was used to investigate the effect of heating on an organo-Ge polymer/nanoparticle composite material containing 4-8 nm diameter alkyl-terminated Ge nanoparticles. The product was obtained from the reduction of GeCl4 with Na(naphthalide) with subsequent capping of the -Cl surface with n-butyl Grignard reagent. The in situ HRTEM micrographs show that the product undergoes significant changes upon heating from room temperature to 600 degrees C. Two pronounced effects were observed: (i) Ge nanoparticles coalesce and remain crystalline throughout the entire temperature range, and (ii) the organo-Ge polymer acts as a source for the in situ formation of additional Ge nanoparticles. The in situ-formed Ge nanoparticles are approximately 2-3 nm in diameter. These in situ-formed nanoparticles (2-3 nm) are so dense that, together with the original ones, they build up an almost continuous crystalline film in the temperatures between 300 and 500 degrees C. Above 480 degrees C, melting of the in situ formed Ge nanoparticles (2-3 nm) is observed, while nanoparticles greater than 5 nm remain crystalline. After cooling to room temperature, the 2-3 nm Ge nanoparticles recrystallized.     

Synthesis of dendrimer-protected TiO2 nanoparticles and photodegradation of organic molecules in an aqueous nanoparticle suspension

Dendrimer-protected TiO2 nanoparticles were synthesized by hydrolysis of TiCl4 in solutions of poly(amido amine) dendrimers (64 terminals) under cooling. The morphology of dendrimers surrounding TiO2 nanoparticles depended on the terminal groups (amine, carboxyl, hydroxy) of dendrimers. The size (4.4-6.7 nm) of dendrimer-protected TiO2 nanoparticles was slightly smaller than that (7.5 nm) of bare TiO2 nanoparticles. The photodegradation of 2,4-dichlorophenoxyacetic acid revealed that dendrimer-protected TiO2 nanoparticles are more active as a photocatalyst than TiO2 nanoparticles without protectors. This suggests that the dendrimer acts as a reservoir of photoreacting reagents besides acting as a protector of nanoparticles.     

Controllable pt nanoparticle deposition on carbon nanotubes as an anode catalyst for direct methanol fuel cells

We report a novel process to prepare well-dispersed Pt nanoparticles on CNTs. Pt nanoparticles, which were modified by the organic molecule triphenylphosphine, were deposited on multiwalled carbon nanotubes by the organic molecule, which acts as a cross linker. By manipulating the relative ratio of Pt nanoparticles and multiwalled carbon nanotubes in solution, Pt/CNT composites with different Pt content were achieved. The so-prepared Pt/CNT composite materials show higher electrocatalytic activity and better tolerance to poisoning species in methanol oxidation than the commercial E-TEK catalyst, which can be ascribed to the high dispersion of Pt nanoparticles on the multiwalled carbon nanotube surface.     

Aqueous-organic phase transfer of gold nanoparticles and gold nanorods using an ionic liquid

The water-immiscible ionic liquid, [C4MIM][PF6], is a solvent medium that allows complete transfer of gold nanoparticles from an aqueous phase into an organic phase. Both spherical and rod-shaped gold nanoparticles are efficiently transferred from an aqueous solution into the organic phase without requiring the use of thiols. The sizes and shapes of the gold nanoparticles were preserved during the phase-transfer process when a surfactant was added to the ionic liquid. This process offers a simple approach for obtaining solutions of differently sized and shaped gold nanoparticles in ionic liquids.     

Application of polymeric nanoparticles prepared by an antisolvent diffusion with preferential solvation for iontophoretic transdermal drug delivery

Indomethacin-loaded poly(lactide-co-glycolide) (PLGA) nanoparticles with an average diameter of 100 nm were prepared by using a combination of an antisolvent diffusion method with preferential solvation (bare nanoparticles). Polyvinyl alcohol (PVA)-coated indomethacin-loaded PLGA nanoparticles with an average diameter of 100 nm were also prepared by emulsification and the solvent evaporation method (PVA-coated nanoparticles). Bare nanoparticles do not have a hydrophilic stabilizer on the surface; therefore, they have high hydrophobicity and negative charges. Electrophoretic mobility of bare nanoparticles at 5 mM NaCl solution was about 68 times higher than that of PVA-coated nanoparticles. Permeability of bare nanoparticles through rat skin was significantly higher than that of PVA-coated nanoparticles when iontophoresis was applied ex vivo. Indomethacin amount inside the skin after the permeation study by using bare nanoparticles was much higher than that by using PVA-coated nanoparticles. Indomethacin transition to circulation and accumulation in muscle by the transdermal delivery of indomethacin-loaded PLGA nanoparticles were significantly enhanced by using the combination of bare nanoparticles and iontophoresis in vivo. As for transdermal route of nanoparticles, both bare and PVA-coated nanoparticles were revealed to penetrate through the transfollicular pathway, and the migration of nanoparticles to follicles was enhanced by the application of iontophoresis. PLGA nanoparticles prepared by the antisolvent diffusion with preferential solvation are beneficial for iontophoretic transdermal delivery of therapeutic agents.     

Architecture of linear arrays of fluorinated co-oligomeric nanocomposite-encapsulated gold nanoparticles: a new approach to the development of gold nanoparticles possessing an extremely red-shifted absorption characteristic

Fluoroalkyl end-capped co-oligomeric nanoparticles, which were prepared by the reaction of fluoroalkanoyl peroxide with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and 1-hydroxy-5-adamantylacrylate (Ad-HAc), were applied to the preparation of novel fluorinated co-oligomeric nanocomposite-encapsulated gold nanoparticles. These fluorinated gold nanocomposites were easily prepared by the reductions of gold ions with poly(methylhydrosiloxane) (PMHS) in the presence of the corresponding fluorinated nanoparticles and tri -n-octylamine (TOA) in 1,2-dichloroethane (DE) at room temperature. These fluorinated gold nanoparticles were isolated as wine-red powders and were found to exhibit good dispersibility in a variety of traditional organic solvents such as DE, methanol, and t-butyl alcohol to afford transparent wine-red solutions. The morphology and stability of these fluorinated co-oligomeic nanocomposite-encapsulated gold nanoparticles were characterized using transmission electron microscopy (TEM), dynamic light scattering measurements (DLS), and UV-vis spectroscopy. DLS measurements and UV-vis spectroscopy showed that these particles are nanometer-size-controlled very fine nanoparticles (185-218 nm) that exhibit a plasmon absorption band at around 530 nm. TEM images also showed that gold nanoparticles are tightly encapsulated into fluorinated co-oligomeric nanoparticle cores. Interestingly, these fluorinated co-oligomeric nanocomposites-encapsulated gold nanoparticles were found to afford linear arrays of these fluorinated nanoparticles with increases in the feed amounts of TOA. More interestingly, these fluorinated gold nanoparticles were able to afford the extremely red-shifted plasmon absorption band at around 960 nm.     

Meticulous Doxorubicin Release from pH-Responsive Nanoparticles Entrapped within an Injectable Thermoresponsive Depot

The dual stimuli-controlled release of doxorubicin from gel-embedded nanoparticles is reported. Non-cytotoxic polymer nanoparticles are formed from poly(ethylene glycol)-b-poly(benzyl glutamate) that, uniquely, contain a central ester link. This connection renders the nanoparticles pH-responsive, enabling extensive doxorubicin release in acidic solutions (pH 6.5), but not in solutions of physiological pH (pH 7.4). Doxorubicin-loaded nanoparticles were found to be stable for at least 31 days and lethal against the three breast cancer cell lines tested. Furthermore, doxorubicin-loaded nanoparticles could be incorporated within a thermoresponsive poly(2-hydroxypropyl methacrylate) gel depot, which forms immediately upon injection of poly(2-hydroxypropyl methacrylate) in dimethyl sulfoxide solution into aqueous solution. The combination of the poly(2-hydroxypropyl methacrylate) gel and poly(ethylene glycol)-b-poly(benzyl glutamate) nanoparticles yields an injectable doxorubicin delivery system that facilities near-complete drug release when maintained at elevated temperatures (37 °C) in acidic solution (pH 6.5). In contrast, negligible payload release occurs when the material is stored at room temperature in non-acidic solution (pH 7.4). The system has great potential as a vehicle for the prolonged, site-specific release of chemotherapeutics.     

Preparation of nanocomposites consisting of an epoxyamine polymer matrix with silver nanoparticles

A promising method is presented for the preparation of polymer composites in situ containing stabilized silver nanoparticles without the use of additional reducing systems. The effects of functionality and the structure of the epoxyamine polymer matrices on their capacity to reduce silver ions and stabilize growing silver nanoparticles were evaluated.     

Fabricating an experimental setup to investigate the performance of an automobile car radiator by using aluminum/water nanofluid

In this present work, effect of Al/water nanofluids on the rheological performance of an automobile car radiator has been investigated. Nanofluids were fabricated by two-step methods, i.e., dispersing of aluminum metal bases nanoparticles of size 75–135 nm in double-distilled water. Experiments were conducted on single-pass cross-flow compact heat exchanger by varying the various parameters such as inlet temperature, flow rate through the heat exchanger, concentration of nanoparticles and velocity of air employed for cooling purpose. It was concluded that the hot side Nusselt numbers are improved by 3.37 and 5.0877% for 0.2 and 0.3% concentrations of nanofluids, respectively, at 318.15 K inlet fluids temperature as compared to base fluids. Colburn factor was increased by 12.94 and 23.45% for 0.2 and 0.3% nanoparticles volume concentration of nanofluids, respectively, at 318.15 K inlet temperature with respect to double-distilled water. Hot fluid side friction factor was increased by 14.04 and 20.916% for 0.2 and 0.3% nanoparticles volume concentration of nanofluids with respect to base fluids, but this average value of friction factor was decreased by 2.29 and 9.1412% when temperature was increased from 318.15 to 323.15 K and 328.15 K, respectively.     

Bioinspired metal-cell wall-metal sandwich structure on an individual bacterial cell scaffold

Pd nanoparticles were introduced to individual Bacillus cells and dispersedly anchored on both the inside and outside of the cell walls. The anchored nanoparticles served as "seeds" to drive the formation of double metallic layers forming a metal-cell wall-metal sandwich structure at the single-cell level.     

Melamine/Stearic Acid Composite Nanowires and Vesicles with an Intercalated Nanostructure Prepared through NCCM Method

A solvent-non-solvent method invented in our laboratory for preparing non-covalently con-nected micelles (NCCM) was used to intercalate melamine (MA) molecules into stearic acid (SA) bilayers to form the composite nanoparticles with an intercalated nanostructure in which a melamine bilayer is sandwiched between two stearic acid bilayers, NCCM method helps to sufficiently mix the two components in nanospace and meanwhile inhibits the strong tendency of self-crystallization of MA, leading to the intercalation. Although the nanopar-ticles have a regular inner structure, the primary MA/SA nanoparticles have an irregular morphology. Regular nanoparticles were obtained through annealing the suspension of the primary nanoparticles. Through annealing at different temperatures, the MA/SA compos-ite nanowires and vesicles with an intercalated structure were prepared respectively. It is proposed that the morphological change results from the change in the intercalated structure.     

Synthesis of silica-gold nanocomposites and their porous nanoparticles by an in-situ approach

We demonstrate the one-step synthesis of a silica-gold nanocomposite by simultaneous hydrolysis and reduction of gold chloride. The aminophenyl group was used as a reducing agent, and the trimethoxy silane group acts a precursor for the formation of silica. The porous gold nanoparticles were formed by etching out the silica-gold nanocomposite by hydrofluoric acid. The electron diffraction of porous gold nanoparticles showed that the particle are polycrystalline with FCC structure. The silica-gold nanocomposite exhibited nonlinear current-voltage behavior, and the porous gold nanoparticles displayed linear current-voltage behavior.